ISO 16030:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Pneumatic fluid power — Connections — Ports and stud ends
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
15-07-2022
Superseded by
Published date
20-12-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This International Standard specifies dimensions and performance requirements for ports and stud ends with
parallel threads for pneumatic fluid power applications.
It specifies reusable, positively retained seals for leak-free connections, for use at pressures from ? 0,09 MPa
(? 0,9 bar 1)) up to 1,6 MPa (16 bar).
Only this International Standard is applicable for threaded ports and stud ends specified in new designs in
pneumatic fluid power applications.
Ports and stud ends conforming to this International Standard are not intended to connect with ports and stud ends
that conform to ISO 1179 or threads that conform to ISO 7-1.
| DevelopmentNote |
Supersedes ISO/FDIS 16030 (12/2001)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NEN ISO 16030 : 2002 AMD 1 2005 | Identical |
| BS ISO 16030:2001 | Identical |
| DIN ISO 16030:2007-05 | Identical |
| NF ISO 16030 : 2005 | Identical |
| SN ISO 16030 : 2001 | Identical |
| 12/30260519 DC : 0 | BS EN ISO 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO/DIS 1179-1:2012) |
| UNE-EN ISO 1179-1:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| 09/30199986 DC : 0 | BS ISO 15524 - PNEUMATIC FLUID POWER - SINGLE ROD SHORT STROKE CYLINDERS |
| BS EN ISO 1179-4:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Stud ends for general use only with metal-to-metal sealing (type B) |
| 01/714184 DC : DRAFT OCT 2001 | ISO/DIS 15552 - PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - BASIC, MOUNTING AND ACCESSORIES DIMENSIONS |
| 08/30176283 DC : DRAFT JAN 2008 | BS ISO 6358-2 - PNEUMATIC FLUID POWER - DETERMINATION OF FLOW-RATE CHARACTERISTICS OF COMPONENTS USING COMPRESSIBLE FLUIDS - PART 2: GENERAL RULES |
| BS EN ISO 1179-3:2008 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| 01/714272 DC : 0 | ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| 02/712438 DC : DRAFT OCT 2002 | ISO/DIS 21287 - PNEUMATIC FLUID POWER - CYLINDERS - COMPACT CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 20 MM TO 100 MM |
| ISO 14743:2004 | Pneumatic fluid power Push-in connectors for thermoplastic tubes |
| I.S. EN ISO 1179-2:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| DIN ISO 21287:2005-12 | Pneumatic fluid power - Cylinders - Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm (ISO 21287:2004) |
| BS ISO 6301-1:2017 | Pneumatic fluid power. Compressed-air lubricators Main characteristics to be included in supplier\'s literature and product-marking requirements |
| 01/714274 DC : 0 | ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| BS EN ISO 1179-1:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Threaded ports |
| 05/30135258 DC : DRAFT JUN 2005 | ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS AND ELASTOMERIC SEALING (TYPE E) |
| 05/30135256 DC : DRAFT JUN 2005 | ISO/DIS 1179-1 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| 17/30366640 DC : 0 | BS ISO 14743 - PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES |
| DIN EN ISO 1179-1:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| I.S. EN ISO 1179-4:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| I.S. EN ISO 1179-1:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS (ISO 1179-1:2013) |
| ISO 6953-1:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements |
| 07/30165998 DC : 0 | BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS |
| 01/714275 DC : 0 | ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| ISO 6301-1:2017 | Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
| 16/30339102 DC : 0 | BS ISO 6301-1 - PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE AND PRODUCT-MARKING REQUIREMENTS |
| BS ISO 14743:2004 | Pneumatic fluid power. Push-in connectors for thermoplastic tubes |
| BS EN ISO 1179-2:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| 05/30135263 DC : DRAFT JUN 2005 | ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| 14/30291030 DC : 0 | BS ISO 6432 - PNEUMATIC FLUID POWER - SINGLE ROD CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 8 TO 25 MM - BASIC AND MOUNTING DIMENSIONS |
| BS ISO 15524:2011 | Pneumatic fluid power. Cylinders. Single-rod short-stroke cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| UNI EN ISO 1179-4 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| ISO 6358-1:2013 | Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 1: General rules and test methods for steady-state flow |
| ISO 15524:2011 | Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| UNI EN ISO 1179-3 : 2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| ISO 15552:2018 | Pneumatic fluid power — Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm — Basic, mounting and accessories dimensions |
| ISO 6432:2015 | Pneumatic fluid power Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm Basic and mounting dimensions |
| ISO 21287:2004 | Pneumatic fluid power — Cylinders — Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| BS ISO 6358-1:2013 | Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids General rules and test methods for steady-state flow |
| BS ISO 21287:2004 | Pneumatic fluid power. Cylinders. Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm |
| BS ISO 6432:2015 | Pneumatic fluid power. Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm. Basic and mounting dimensions |
| 01/714273 DC : 0 | ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| DIN EN ISO 1179-2:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| UNE-EN ISO 1179-2:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| ISO 1179-3:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| ISO 1179-1:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports |
| EN ISO 1179-2:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| EN ISO 1179-1:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| EN ISO 1179-3:2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007) |
| EN ISO 1179-4:2008 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007) |
| 05/30125044 DC : DRAFT JAN 2005 | ISO 19973-2 - PNEUMATIC FLUID POWER - DETERMINATION OF RELIABILITY BY TESTING - PART 2: VALVES |
| BS ISO 6953-1:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to be included in literature from suppliers and product-marking requirements |
| DIN EN ISO 1179-4:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| 13/30250847 DC : 0 | BS ISO 6953-1 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 1: MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS AND PRODUCT-MARKING REQUIREMENTS |
| 12/30260523 DC : 0 | BS EN ISO 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD NDS WITH ELASTOMERIC SEALING (TYPE E) (ISO/DIS 1179-2:2012) |
| DIN EN ISO 1179-3:2008-08 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| BS ISO 5782-1:2017 | Pneumatic fluid power. Compressed air filters Main characteristics to be included in supplier\'s literature and product-marking requirements |
| BS ISO 15552:2004 | Pneumatic fluid power. Cylinders with detachable mountings, 1 000 kPa 10 bar series, bores from 32 mm to 320 mm. Basic, mounting and accessories dimensions |
| 05/30135261 DC : DRAFT JUN 2005 | ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| I.S. EN ISO 1179-3:2008 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| UNI EN ISO 1179-1 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 1: THREADED PORTS |
| UNI EN ISO 1179-2 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| ISO 5782-1:2017 | Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| ISO 1179-4:2007 | Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
| NBR ISO 14743 : 2009 | PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| ISO 8778:2003 | Pneumatic fluid power — Standard reference atmosphere |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 1179:1981 | Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications |
| ISO 7-2:2000 | Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 14743:2004 | Pneumatic fluid power Push-in connectors for thermoplastic tubes |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.