ISO 15265:2004
Current
Current
The latest, up-to-date edition.
Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
05-08-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 15265:2004 describes a strategy for assessing and interpreting the risk of physiological constraints, or of discomfort, while working in a given climatic environment.
It is applicable in any working situation with steady or varying conditions of the climate, metabolic rate or clothing.
ISO 15265:2004 does not describe a single procedure, but a strategy in three stages that can be used successively to gain deeper insight in the working conditions, as it is needed to draw the most appropriate conclusions about the risk involved and identify the best control and prevention measures.
It is definitely oriented towards the prevention and/or control of these working problems in the heat or cold. The risk of heat or cold disorders and/or discomfort is therefore assessed only to the extent that it is required to reach this goal.
| DevelopmentNote |
Supersedes ISO/DIS 15265 (08/2004)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| GOST R ISO 15265 : 2006 | Identical |
| UNE-EN ISO 15265:2005 | Identical |
| NF EN ISO 15265 : 2004 | Identical |
| NBN EN ISO 15265 : 2004 | Identical |
| NEN EN ISO 15265 : 2004 | Identical |
| NS EN ISO 15265 : 1ED 2004 | Identical |
| I.S. EN ISO 15265:2004 | Identical |
| PN EN ISO 15265 : 2005 | Identical |
| SN EN ISO 15265 : 2004 | Identical |
| UNI EN ISO 15265 : 2005 | Identical |
| BS EN ISO 15265:2004 | Identical |
| EN ISO 15265:2004 | Identical |
| DIN EN ISO 15265:2004-11 | Identical |
| BS EN ISO 28803:2012 | Ergonomics of the physical environment. Application of international standards to people with special requirements |
| I.S. EN ISO 26800:2011 | ERGONOMICS - GENERAL APPROACH, PRINCIPLES AND CONCEPTS |
| UNI EN ISO 28802 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
| EN ISO 7243:2017 | Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO 7243:2017) |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| EN ISO 8996:2004 | Ergonomics of the thermal environment - Determination of metabolic rate (ISO 8996:2004) |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| 10/30191968 DC : 0 | BS ISO 28803 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
| 09/30140549 DC : 0 | BS EN ISO 26800 - ERGONOMICS - GENERAL APPROACH, PRINCIPLES AND CONCEPTS |
| DIN EN ISO 28802:2012-06 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| BS EN ISO 26800:2011 | Ergonomics. General approach, principles and concepts |
| DIN EN ISO 26800:2011-11 | Ergonomics - General approach, principles and concepts (ISO 26800:2011); German version EN ISO 26800:2011 |
| 15/30311328 DC : 0 | BS EN ISO 7243 - ERGONOMICS OF THE THERMAL ENVIRONMENT - ASSESSMENT OF HEAT STRESS USING THE WBGT (WET BULB GLOBE TEMPERATURE) INDEX |
| PD ISO/TR 22100-3:2016 | Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards |
| I.S. EN ISO 28803:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS (ISO 28803:2012) |
| BS EN ISO 7243:2017 | Ergonomics of the thermal environment. Assessment of heat stress using the WBGT (wet bulb globe temperature) index |
| I.S. EN ISO 28802:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE (ISO 28802:2012) |
| ISO 7243:2017 | Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index |
| ISO 28802:2012 | Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| EN ISO 26800:2011 | Ergonomics - General approach, principles and concepts (ISO 26800:2011) |
| UNI EN ISO 15743 : 2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
| DIN EN ISO 28803:2012-06 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
| 09/30191965 DC : 0 | BS ISO 28802 - ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENT OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
| I.S. EN ISO 8996:2004 | ERGONOMICS OF THE THERMAL ENVIRONMENT - DETERMINATION OF METABOLIC RATE |
| 08/30182164 DC : DRAFT MAY 2008 | BS ISO 31000 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES ON IMPLEMENTATION |
| DIN EN ISO 15743:2008-11 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
| PD ISO/IEC TS 24748-6:2016 | Systems and software engineering. Life cycle management System integration engineering |
| BS EN ISO 28802:2012 | Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| ISO/IEC TS 24748-6:2016 | Systems and software engineering — Life cycle management — Part 6: System integration engineering |
| ISO/TR 22100-3:2016 | Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards |
| I.S. EN ISO 15743:2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - COLD WORKPLACES - RISK ASSESSMENT AND MANAGEMENT |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| ISO 28803:2012 | Ergonomics of the physical environment — Application of International Standards to people with special requirements |
| ISO 15743:2008 | Ergonomics of the thermal environment Cold workplaces Risk assessment and management |
| ISO 8996:2004 | Ergonomics of the thermal environment Determination of metabolic rate |
| BS EN ISO 8996:2004 | Ergonomics of the thermal environment. Determination of metabolic rate |
| 16/30282349 DC : 0 | BS ISO 35101 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OPERATIONS - WORKING ENVIRONMENT |
| EN ISO 28802:2012 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| EN ISO 28803:2012 | Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012) |
| EN ISO 15743:2008 | Ergonomics of the thermal environment - Cold workplaces - Risk assessment and management (ISO 15743:2008) |
| BS EN ISO 15743:2008 | Ergonomics of the thermal environment. Cold workplaces. Risk assessment and management |
| I.S. EN ISO 7243:2017 | ERGONOMICS OF THE THERMAL ENVIRONMENT - ASSESSMENT OF HEAT STRESS USING THE WBGT (WET BULB GLOBE TEMPERATURE) INDEX (ISO 7243:2017) |
| UNI EN ISO 26800 : 2011 | ERGONOMICS - GENERAL APPROACH, PRINCIPLES AND CONCEPTS |
| UNI EN ISO 28803 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| ISO 26800:2011 | Ergonomics — General approach, principles and concepts |
| DIN EN ISO 8996:2005-01 | Ergonomics of the thermal environment - Determination of metabolic rate (ISO 8996:2004) |
| ISO 12894:2001 | Ergonomics of the thermal environment Medical supervision of individuals exposed to extreme hot or cold environments |
| ISO 7243:2017 | Ergonomics of the thermal environment — Assessment of heat stress using the WBGT (wet bulb globe temperature) index |
| ISO 7726:1998 | Ergonomics of the thermal environment Instruments for measuring physical quantities |
| ISO/TR 11079:1993 | Evaluation of cold environments — Determination of required clothing insulation (IREQ) |
| ISO 8996:2004 | Ergonomics of the thermal environment Determination of metabolic rate |
| ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| ISO 11399:1995 | Ergonomics of the thermal environment Principles and application of relevant International Standards |
| ISO 9920:2007 | Ergonomics of the thermal environment Estimation of thermal insulation and water vapour resistance of a clothing ensemble |
| ISO 9886:2004 | Ergonomics Evaluation of thermal strain by physiological measurements |
| ISO 13731:2001 | Ergonomics of the thermal environment Vocabulary and symbols |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.