ISO 15176:2019
Current
The latest, up-to-date edition.
Guidance on characterization of excavated soil and other materials intended for re-use
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
03-06-2019
This document provides guidance on the range of tests that could be necessary to characterize soil and other soil materials intended to be re-used, with or without preliminary treatment (e.g. screening to remove over large material). It is intended to be of use in determining the suitability of soil materials for re-use (see 3.4.1), and the assessment of the environmental impacts that might arise from re-use. It takes into account the different requirements of topsoil, sub-soil and other soil materials such as sediments or treated soils. International Standard methods are listed that might be of use for characterization.
Soil materials include natural soils and other materials (e.g. fill, made ground) excavated, stripped, or otherwise removed from their original in-ground or above-ground location (e.g. stockpile), dredged materials, manufactured soils, and soil treated to remove or destroy contaminants. For manufactured soils, which are often made using excavated materials together with other materials such as "green waste", the characteristics of the components and of the manufactured product might need to be determined.
NOTE The terms "excavated soil" and "excavated soil materials" are used for brevity throughout the document to embrace the range of materials covered.
An overriding principle governing the guidance provided in this document is that when there is to be no change in intended land use at the target site, imported soil materials cannot lead to a permanent reduction in performance of relevant soil functions.
The guidance provided is intended to cover a range of possible end uses, including:
— play areas for small children, including nursery schools, kindergartens, etc.;
— schools;
— gardens and other residential areas;
— allotments;
— horticulture;
— agriculture;
— forestry;
— recreational areas, e.g. parks, sport fields;
— restoration of damaged ecosystems;
— mining and industrial sites;
— construction sites;
— road and rail constructions.
It is not applicable to the placement of soil materials in an aqueous environment or to restore underground workings. It does not address geotechnical requirements when soil materials are to be used as construction material.
NOTE The sensitive end uses listed above such as play areas for small children, schools, gardens, agriculture and recreational areas require particular care, particularly when excavated soils are derived from contaminated sites.
Committee |
ISO/TC 190/SC 7
|
DocumentType |
Standard
|
Pages |
53
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS ISO 15176:2019 | Identical |
SS-ISO 15176:2020 | Identical |
NEN-ISO 15176:2019 | Identical |
UNI ISO 15176:2024 | Identical |
ISO 11268-3:2014 | Soil quality Effects of pollutants on earthworms Part 3: Guidance on the determination of effects in field situations |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 14254:2001 | Soil quality Determination of exchangeable acidity in barium chloride extracts |
ISO 16072:2002 | Soil quality Laboratory methods for determination of microbial soil respiration |
ISO 11466:1995 | Soil quality — Extraction of trace elements soluble in aqua regia |
ISO 11259:1998 | Soil quality Simplified soil description |
ISO 15009:2016 | Soil quality Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons Purge-and-trap method with thermal desorption |
ISO 10381-1:2002 | Soil quality Sampling Part 1: Guidance on the design of sampling programmes |
ISO 11272:2017 | Soil quality — Determination of dry bulk density |
ISO 10381-3:2001 | Soil quality Sampling Part 3: Guidance on safety |
ISO 10693:1995 | Soil quality Determination of carbonate content Volumetric method |
ISO 11269-2:2012 | Soil quality — Determination of the effects of pollutants on soil flora — Part 2: Effects of contaminated soil on the emergence and early growth of higher plants |
ISO 11264:2005 | Soil quality Determination of herbicides Method using HPLC with UV-detection |
ISO 14688-1:2002 | Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description |
ISO 14255:1998 | Soil quality Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air-dry soils using calcium chloride solution as extractant |
ISO 11271:2002 | Soil quality — Determination of redox potential — Field method |
ISO 10381-6:2009 | Soil quality Sampling Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory |
ISO 14240-1:1997 | Soil quality Determination of soil microbial biomass Part 1: Substrate-induced respiration method |
ISO 13877:1998 | Soil quality Determination of polynuclear aromatic hydrocarbons Method using high -performance liquid chromatography |
ISO 14240-2:1997 | Soil quality Determination of soil microbial biomass Part 2: Fumigation-extraction method |
ISO 11464:2006 | Soil quality Pretreatment of samples for physico-chemical analysis |
ISO 11074-1:1996 | Soil quality — Vocabulary — Part 1: Terms and definitions relating to the protection and pollution of the soil |
ISO 5667-4:2016 | Water quality Sampling Part 4: Guidance on sampling from lakes, natural and man-made |
EN 45002:1989 | GENERAL CRITERIA FOR THE ASSESSMENT OF TESTING LABORATORIES |
ISO 11276:1995 | Soil quality — Determination of pore water pressure — Tensiometer method |
ISO 10381-2:2002 | Soil quality Sampling Part 2: Guidance on sampling techniques |
ISO 11267:2014 | Soil quality — Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants |
ISO 11277:2009 | Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation |
ISO 5667-6:2014 | Water quality Sampling Part 6: Guidance on sampling of rivers and streams |
ISO 17155:2012 | Soil quality — Determination of abundance and activity of soil microflora using respiration curves |
ISO 14256-2:2005 | Soil quality — Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution — Part 2: Automated method with segmented flow analysis |
ISO 10381-5:2005 | Soil quality Sampling Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination |
ISO 14238:2012 | Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes |
ISO 11047:1998 | Soil quality Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc Flame and electrothermal atomic absorption spectrometric methods |
EN 45002:1989 | GENERAL CRITERIA FOR THE ASSESSMENT OF TESTING LABORATORIES |
ISO 11461:2001 | Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method |
ISO 10382:2002 | Soil quality — Determination of organochlorine pesticides and polychlorinated biphenyls — Gas-chromatographic method with electron capture detection |
ISO 10381-7:2005 | Soil quality Sampling Part 7: Guidance on sampling of soil gas |
ISO 11074-4:1999 | Soil quality - Vocabulary Part 4: Terms and definitions related to rehabilitation of soils and sites |
ISO 11261:1995 | Soil quality — Determination of total nitrogen — Modified Kjeldahl method |
ISO 11275:2004 | Soil quality Determination of unsaturated hydraulic conductivity and water-retention characteristic Wind's evaporation method |
ISO 14869-1:2001 | Soil quality — Dissolution for the determination of total element content — Part 1: Dissolution with hydrofluoric and perchloric acids |
ISO 13536:1995 | Soil quality — Determination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1 |
ISO 15799:2003 | Soil quality Guidance on the ecotoxicological characterization of soils and soil materials |
ISO 14869-2:2002 | Soil quality — Dissolution for the determination of total element content — Part 2: Dissolution by alkaline fusion |
ISO 13878:1998 | Soil quality Determination of total nitrogen content by dry combustion ("elemental analysis") |
ISO 11269-1:2012 | Soil quality — Determination of the effects of pollutants on soil flora — Part 1: Method for the measurement of inhibition of root growth |
ISO/TR 11046:1994 | Soil quality Determination of mineral oil content Method by infrared spectrometry and gas chromatographic method |
ISO 15800:2003 | Soil quality Characterization of soil with respect to human exposure |
ISO 15178:2000 | Soil quality Determination of total sulfur by dry combustion |
BS 3882:1994 | Specification for topsoil |
ISO 14507:2003 | Soil quality Pretreatment of samples for determination of organic contaminants |
ISO 11268-2:2012 | Soil quality — Effects of pollutants on earthworms — Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei |
ISO 11274:1998 | Soil quality Determination of the water-retention characteristic Laboratory methods |
ISO 10390:2005 | Soil quality Determination of pH |
ISO 10694:1995 | Soil quality — Determination of organic and total carbon after dry combustion (elementary analysis) |
ISO 14235:1998 | Soil quality Determination of organic carbon by sulfochromic oxidation |
ISO 11266:1994 | Soil quality — Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions |
ISO 5667-12:2017 | Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas |
ISO 10573:1995 | Soil quality — Determination of water content in the unsaturated zone — Neutron depth probe method |
ISO 5667-11:2009 | Water quality Sampling Part 11: Guidance on sampling of groundwaters |
ISO 11048:1995 | Soil quality Determination of water-soluble and acid-soluble sulfate |
ISO 14154:2005 | Soil quality — Determination of some selected chlorophenols — Gas-chromatographic method with electron-capture detection |
ISO 11508:2017 | Soil quality — Determination of particle density |
ISO 11263:1994 | Soil quality — Determination of phosphorus — Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution |
ISO 10381-4:2003 | Soil quality Sampling Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites |
ISO 11268-1:2012 | Soil quality — Effects of pollutants on earthworms — Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei |
ISO 11260:1994 | Soil quality Determination of effective cation exchange capacity and base saturation level using barium chloride solution |
ISO 15473:2002 | Soil quality Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions |
ISO 10381-8:2006 | Soil quality Sampling Part 8: Guidance on sampling of stockpiles |
ISO 14870:2001 | Soil quality — Extraction of trace elements by buffered DTPA solution |
ISO 15175:2004 | Soil quality Characterization of soil related to groundwater protection |
ISO 14239:2017 | Soil quality — Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.