ISO 1513:2010
Current
Current
The latest, up-to-date edition.
Paints and varnishes Examination and preparation of test samples
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English, Russian
Published date
12-04-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 1513:2010 specifies both the procedure for preliminary examination of a single sample, as received for testing, and the procedure for preparing a test sample by blending and reduction of a series of samples representative of a consignment or bulk of paint, varnish or related product.
| DevelopmentNote |
Supersedes ISO/DIS 1513. (04/2010)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IS 101 : Part 1 : Sec 2 : 2023 | Identical |
| NF EN ISO 1513 : 2010 | Identical |
| NBN EN ISO 1513 : 2010 | Identical |
| NEN EN ISO 1513 : 2010 | Identical |
| NS EN ISO 1513 : 2010 | Identical |
| I.S. EN ISO 1513:2010 | Identical |
| PN EN ISO 1513 : DEC 2010 | Identical |
| SN EN ISO 1513 : 2010 | Identical |
| UNI EN ISO 1513 : 2010 | Identical |
| SS-EN ISO 1513 : 2010 | Identical |
| BS EN ISO 1513:1995 | Identical |
| EN ISO 1513:2010 | Identical |
| DIN EN ISO 1513:2010-10 | Identical |
| BS EN ISO 1513:2010 | Identical |
| UNE-EN 21513:1993 | Identical |
| UNE 48010:1981 | Identical |
| EN 21513 : 1991 | Identical |
| DIN EN 21513 : 1991 | Identical |
| UNE 48012:1981 | Identical |
| BS 3900-A2(1993) : 1993 AMD 8331 | Identical |
| UNE-EN ISO 1513:2010 | Identical |
| I.S. EN 21513:1992 | Identical |
| NF EN 60464-2 : 2002 AMD 1 2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| BS 3900-A17:1986 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Coating of test panels at a specified spreading rate |
| 10/30206990 DC : 0 | BS EN ISO 6272-1 - PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER |
| ISO 7783:2011 | Paints and varnishes Determination of water-vapour transmission properties Cup method |
| MIL-PRF-32239 Revision A:2014 | COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
| DIN EN ISO 20567-3:2013-04 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
| BS 3900-F13:1986 | Methods of tests for paints; filiform corrosion test on steel |
| DIN EN ISO 9117-2:2010-07 | Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
| I.S. EN ISO 1517:1995 | PAINTS AND VARNISHES - SURFACE-DRYING TEST - BALLOTINI METHOD |
| I.S. EN ISO 3678:1995 | PAINTS AND VARNISHES - PRINT-FREE TEST |
| I.S. EN ISO 12137-1:2006 | PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE - PART 1: METHOD USING A CURVED STYLUS |
| 12/30245694 DC : 0 | BS EN ISO 16927 - PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| 15/30284318 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| 10/30229703 DC : 0 | BS EN ISO 2812-3 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM |
| BS 3900-E17(1997) : 1997 AMD 16863 | METHODS OF TEST FOR PAINTS - DETERMINATION OF MAR RESISTANCE USING A CURVED STYLUS |
| ISO 6713:1984 | Paints and varnishes — Preparation of acid extracts from paints in liquid or powder form |
| BS 2000-602(2013) : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| UNI EN ISO 1518-1 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
| 11/30217714 DC : 0 | BS EN ISO 15184 - PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST |
| 10/30210869 DC : 0 | BS EN ISO 9117-4 - PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER |
| 11/30229694 DC : 0 | BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| ISO 4623-1:2000 | Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates |
| ONORM EN ISO 1518-2 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011) |
| 03/300854 DC : DRAFT JAN 2003 | ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 09/30196709 DC : DRAFT DEC 2009 | BS ISO 2811-4 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 4: PRESSURE CUP METHOD |
| DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
| DIN 55679 : 1985 | PAINTS, VARNISHES AND RELATED PRODUCTS; DETERMINATION OF FLASHPOINT; RAPID EQUILIBRIUM METHOD |
| BS 3900-E12:1986 | Methods of test for paints Indentation test (spherical or pyramidal) |
| BS 3900-E12.2:2000 | Methods of test for paints Determination of Knoop hardness by measurement of the indentation depth |
| ISO 12013-2:2012 | Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 2: Glass transition temperature |
| BS 3900-C7:1982 | Methods of test for paints. Tests associated with paint film formation Pressure test for stackability |
| DIN EN ISO 2812-2:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| DIN EN ISO 1518-2:2012-01 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011) |
| DIN EN ISO 28199-1:2010-01 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) |
| BS EN ISO 9117-6:2012 | Paints and varnishes. Drying tests Print-free test |
| 10/30215721 DC : 0 | BS EN ISO 3233 - PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE DENSITY OF A DRIED COATING |
| DIN EN ISO 9117-1:2009-10 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| 14/30309758 DC : 0 | BS EN ISO 4623-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES |
| 04/19988928 DC : DRAFT AUG 2004 | EN 4158 - AEROSPACE SERIES - MEASUREMENT OF ELECTRICAL RESISTANCE OF CONDUCTIVE LAYERS |
| 14/30298283 DC : 0 | BS ISO 18314-1 - ANALYTICAL COLORIMETRY - PART 1: PRACTICAL COLOUR MEASUREMENT |
| BS 3900-B5:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Preparation of acid extracts from liquid paints or coating powders |
| BS ISO 11347:2012 | Ships and marine technology. Large yachts. Measurement and assessment of the visual appearance of coatings |
| 97/700599 DC : DRAFT JAN 1997 | PREN 4160 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| UNE-EN ISO 9117-4:2013 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
| 17/30361497 DC : 0 | BS EN ISO 2812-5 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
| BS EN ISO 15184:2012 | Paints and varnishes. Determination of film hardness by pencil test |
| BS 3900-F14(1995) : 1995 AMD 9931 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ARTIFICIAL WEATHERING BY EXPOSURE TO FILTERED XENON-ARC RADIATION |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| BS ISO 18314-1 : 2015 | ANALYTICAL COLORIMETRY - PART 1: PRACTICAL COLOUR MEASUREMENT |
| ONORM EN ISO 1518-1 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
| I.S. EN 4593:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SOLAR ABSORPTANCE |
| ISO 1518-1:2011 | Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method |
| BS ISO 20567-1 : 2005 AMD 16853 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING |
| BS EN ISO 3233-2:2014 | Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle |
| BS ISO 20567-2 : 2005 AMD 16852 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY |
| BS EN 2434-004:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish High flexibility |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| BS 3900-A24(2000) : 2000 AMD 13286 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD |
| BS 3900-E18(1997) : 1997 AMD 16862 | METHODS OF TEST FOR PAINTS - DETERMINATION OF MAR RESISTANCE USING A POINTED STYLUS |
| 09/30207404 DC : 0 | BS ISO 13007-2 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 2: TEST METHODS FOR ADHESIVES |
| BS EN 4159:2011 | Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth |
| BS EN 15457:2014 | Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
| 02/123276 DC : DRAFT AUG 2002 | BS EN 1062-7 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 7: DETERMINATION OF CRACK BRIDGING PROPERTIES |
| NF EN ISO 1518-2 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD |
| 02/123757 DC : DRAFT OCT 2002 | ISO 20567-2 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 2: SINGLE IMPACT TEST |
| BS ISO 11997-1 : 2005 AMD 16875 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
| UNE-EN ISO 15091:2013 | Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012) |
| PREN 15457 : DRAFT 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
| I.S. EN ISO 9117-2:2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
| I.S. EN ISO 16925:2014 | PAINTS AND VARNISHES - DETERMINATION OF THE RESISTANCE OF COATINGS TO PRESSURE WATER-JETTING (ISO 16925:2014) |
| PREN 4593 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHOD - DETERMINATION OF SOLAR ABSORPTANCE |
| PREN 4406 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE COATING - ABRASION RESISTANT |
| PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| I.S. EN ISO 2812-2:2007 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| I.S. EN 2434-003:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 003: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
| I.S. EN ISO 1518-2:2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011) |
| ISO 11503:1995 | Paints and varnishes — Determination of resistance to humidity (intermittent condensation) |
| ISO/TS 19392-3:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 3: Determination and evaluation of resistance to rain erosion using water jet |
| I.S. EN ISO 2812-4:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 4: SPOTTING METHODS (ISO 2812-4:2017) |
| UNI EN ISO 7783 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
| UNI EN ISO 15184 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST |
| UNI EN ISO 9038 : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| UNE-EN ISO 2812-3:2013 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
| UNI EN 2434-004 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
| EN ISO 2812-3:2012 | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium (ISO 2812-3:2012) |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| I.S. EN 15458:2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
| ASTM D 3925 : 2002 : R2010 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| ISO 16053:2010 | Paints and varnishes Coating materials and coating systems for exterior wood Natural weathering test |
| I.S. EN ISO 4623-1:2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
| NF EN ISO 2431 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS |
| ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
| I.S. EN 927-3:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| ISO 15184:2012 | Paints and varnishes Determination of film hardness by pencil test |
| DIN EN ISO 11890-2:2013-07 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| DIN EN ISO 2811-1:2016-08 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| DIN EN ISO 11341:2004-12 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| DIN EN ISO 6272-2:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| DIN EN ISO 11507:2007-05 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
| BS EN ISO 14680-3:2006 | Paints and varnishes. determination of pigment content Filtration method |
| UNE-EN ISO 4623-2:2016 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
| BS EN 2435-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance |
| BS EN ISO 9038:2013 | Determination of sustained combustibility of liquids |
| BS EN ISO 1518:2001 | Paints and varnishes. Scratch test |
| ONORM EN ISO 15091 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE (ISO 15091:2012) |
| BS EN 2436-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer For exterior use with surface preparation tolerance |
| BS EN ISO 1520:2006 | Paints and varnishes. Cupping test |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| BS EN ISO 20566:2013 | Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
| BS EN ISO 2884-1:2006 | Paints and varnishes. Determination of viscosity using rotary viscometers Cone-and-plate viscometer operated at a high rate of shear |
| BS EN ISO 1517:1995 | Paints and varnishes. Surface-drying test. Ballotini method |
| BS EN 2436-001:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer Basic requirements |
| BS EN ISO 2811-2:2011 | Paints and varnishes. Determination of density Immersed body (plummet) method |
| BS EN ISO 2811-4:2011 | Paints and varnishes. Determination of density Pressure cup method |
| BS EN 2436-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion and fluid resistance |
| BS EN 13062:2003 | Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement |
| I.S. EN 1062-3:2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| CEN/TS 16499:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood |
| EN 1062-7:2004 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 7: Determination of crack bridging properties |
| I.S. EN ISO 3231:1998 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| ONORM EN ISO 3679 : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| BS 3900-F18(2005) : 2005 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
| EN ISO 2812-1:2017 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
| BS EN ISO 3233-1:2013 | Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
| 14/30289467 DC : 0 | BS EN ISO 3248 - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT |
| 01/121972 DC : DRAFT MAY 2001 | BS 3900-E12.3 - PAINTS AND VARNISHES - DETERMINATION OF MICRO-INDENTATION HARDNESS - PART 3: DETERMINATION OF UNIVERSAL HARDNESS AND RELATED PROPERTIES USING A VICKERS INDENTOR |
| BS 3900-F12:1985 | Methods of test for paint. Durability tests on paint films Determination of resistance to neutral salt spray |
| UNE-EN ISO 9117-6:2013 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
| 14/30309764 DC : 0 | BS EN ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 1: MULTI-IMPACT TESTING |
| UNI EN 4171 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
| 12/30229685 DC : 0 | BS EN ISO 13803 - PAINTS AND VARNISHES - DETERMINATION OF REFLECTION HAZE ON PAINT FILMS AT 20 DEGREES |
| ISO 6504-1:1983 | Paints and varnishes Determination of hiding power Part 1: Kubelka-Munk method for white and light-coloured paints |
| BS EN 4594:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance |
| BS EN ISO 9117-1:2009 | Paints and varnishes. Drying tests Determination of through-dry state and through-dry time |
| BS EN ISO 11997-1:2017 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humid |
| BS EN 2434-003:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish Flexible and high fluid resistance for interior |
| 09/30207410 DC : 0 | BS ISO 13007-4 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 4: TEST METHODS FOR GROUTS |
| BS EN ISO 15091:2012 | Paints and varnishes. Determination of electrical conductivity and resistance |
| 14/30266805 DC : 0 | BS EN ISO 4624 - PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION |
| 12/30243830 DC : 0 | BS EN ISO 16474-1 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| 02/123769 DC : DRAFT OCT 2002 | ISO 9514 - PAINTS AND VARNISHES - DETERMINATION OF THE POT-LIFE OF LIQUID SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
| 09/30196698 DC : 0 | BS ISO 2811-1 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 1: PYKNOMETER METHOD |
| 17/30327456 DC : DRAFT SEP 2017 | BS ISO 20266 - PAINTS AND VARNISHES - DETERMINATION OF IMAGE CLARITY (DEGREE OF SHARPNESS OF REFLECTED OR TRANSMITTED IMAGE) |
| BS EN ISO 16927:2014 | Paints and varnishes. Determination of the overcoatability and recoatability of a coating |
| 10/30229700 DC : 0 | BS EN ISO 9117-6 - PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST |
| BS 3900-A20(1998) : 1998 AMD 13282 | METHODS OF TEST FOR PAINTS - DETERMINATION OF DENSITY BY THE IMMERSED BODY (PLUMMET) METHOD |
| BS ISO 19396-2:2017 | Paints and varnishes. Determination of pH value pH electrodes with ISFET technology |
| 14/30309761 DC : 0 | BS EN ISO 11997-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMIDITY |
| BS EN ISO 1518-2:2011 | Paints and varnishes. Determination of scratch resistance Variable-loading method |
| BS 3900-F16(1997) : 1997 AMD 13289 | METHODS OF TEST FOR PAINTS - RESISTANCE TO ARTIFICIAL WEATHERING (UV RADIATION AND WATER) |
| 03/300855 DC : DRAFT JAN 2003 | ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| DIN EN ISO 3233-1:2013-05 | PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| 10/30206970 DC : 0 | BS EN ISO 6272-2 - PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER |
| 04/19988922 DC : 0 | EN 4171 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE ACID PHOSPHORIC INDEX |
| BS 3900-F17(1998) : 1998 AMD 13281 | METHODS OF TEST FOR PAINTS - DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS |
| 02/122653 DC : DRAFT JUN 2002 | BS EN ISO 6860 - PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL) |
| EN ISO 9038:2013 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| BS 2000-524(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 3900-F9(1982) : AMD 8611 | METHODS OF TEST FOR PAINTS - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO HUMIDITY (CONTINUOUS CONDENSATION) |
| UNI EN 15457 : 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
| BS 3900-K1(2001) : 2001 AMD 15245 | METHODS OF TEST FOR PAINTS - GROUP K: DETERMINATION OF RELEASE RATES OF BIOCIDES FROM ANTIFOULING PAINTS - PART K1: GENERAL METHOD FOR EXTRACTION OF BIOCIDES |
| UNI EN ISO 3233-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE |
| BS 3900-B18(1994) : AMD 8689 | PAINTS AND VARNISHES. DETERRMINATION OF NON-VOLATILE MATTER OF PAINTS, VARNISHES AND BINDERS FOR PAINTS AND VARNISHES |
| BS 3900-G8(1993) : 1993 AMD 8356 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO LIQUIDS. WATER IMMERSION METHOD |
| BS 3900-A16:1986 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of natural spreading rate by brush application |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| BS 3900-D6:1982 | Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film |
| S.R. CEN/TS 16499:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
| I.S. EN 2434-001:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
| BS 3900-D13(2000) : 2000 AMD 15244 | METHODS OF TEST FOR PAINTS - GROUP D: OPTICAL TESTS ON PAINT FILMS - PART D13: DETERMINATION OF REFLECTION HAZE ON PAINT FILMS AT 20 DEGREE C |
| 15/30309731 DC : 0 | BS ISO 19396-1 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 1: PH ELECTRODES WITH GLASS MEMBRANE |
| BS EN 4171:2011 | Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index |
| I.S. EN ISO 15184:2012 | PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012) |
| I.S. ISO 1512:1988 | PAINTS AND VARNISHES - SAMPLING |
| BS 3900-A21(1998) : 1998 AMD 13283 | METHODS OF TEST FOR PAINTS - DETERMINATION OF DENSITY BY THE OSCILLATION METHOD |
| ONORM EN ISO 6504-1 : 2006 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 1: KUBELKA-MUNK METHOD FOR WHITE AND LIGHT-COLOURED PAINTS |
| I.S. EN 15457:2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
| ONORM EN ISO 28199-1 : 2010 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| PREN 4594 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| PREN 2436-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 02: HIGH CORROSION RESISTANCE |
| BS EN ISO 2812-4:2017 | Paints and varnishes. Determination of resistance to liquids Spotting methods |
| PREN 2436-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 04: HIGH CORROSION AND FLUID RESISTANCE WITH SURFACE PREPARATION TOLERANCE |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| PREN 2436-5 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING PRIMER - PART 05: FOR EXTERIOR USE WITH SURFACE PREPARATION TOLERANCE |
| ISO/TS 19392-1:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 1: Minimum requirements and weathering |
| ISO 1518-2:2011 | Paints and varnishes Determination of scratch resistance Part 2: Variable-loading method |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| UNE-EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
| I.S. ISO 6713:1988 | PAINTS AND VARNISHES - PREPARATION OF ACID EXTRACTS FROM PAINTS IN LIQUID OR POWDER FORM |
| I.S. EN ISO 3233-2:2014 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014) |
| I.S. EN ISO 9117-6:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST (ISO 9117-6:2012) |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| ISO 2812-5:2007 | Paints and varnishes Determination of resistance to liquids Part 5: Temperature-gradient oven method |
| I.S. EN 4595:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| BS EN ISO 16474-1:2013 | Paints and varnishes. Methods of exposure to laboratory light sources General guidance |
| BS 3900-C6:1983 | Methods of test for paints. Tests associated with paint film formation Determination of fineness of grind |
| BS EN ISO 1518-1:2011 | Paints and varnishes. Determination of scratch resistance Constant-loading method |
| UNI CEN/TS 16499 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| UNI EN ISO 1518-2 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE- LOADING METHOD |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
| I.S. EN 2434-004:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 004: HIGH FLEXIBILITY |
| DIN EN ISO 2812-3:2012-10 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| EN ISO 12944-7:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:2017) |
| ASTM D 3925 : 2002 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| I.S. ISO 6441:1988 | PAINTS AND VARNISHES - INDENTATION TEST (SPHERICAL OR PYRAMIDAL) |
| I.S. EN ISO 6504-3:2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS EN ISO 6504-3:2007 | Paints and varnishes. Determination of hiding power Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| I.S. EN ISO 6504-1:2006 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 1: KUBELKA-MUNK METHOD FOR WHITE AND LIGHT-COLOURED PAINTS |
| DIN EN ISO 14680-1:2006-04 | Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) |
| DIN EN ISO 14680-3:2006-04 | Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) |
| DIN EN 927-3:2012-10 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN ISO 14680-2:2006-04 | Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) |
| DIN EN ISO 6272-1:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| DIN EN ISO 9038:2013-12 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| DIN EN ISO 20566:2013-06 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| DIN EN ISO 1520:2007-11 | PAINTS AND VARNISHES - CUPPING TEST |
| BS EN 4588:2007 | Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| ISO 15711:2003 | Paints and varnishes — Determination of resistance to cathodic disbonding of coatings exposed to sea water |
| UNE-EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| BS EN ISO 12137-1:2006 | Paints and varnishes. Determination of mar resistance Method using a curved stylus |
| UNE-EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
| UNE-EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| ISO 28199-1:2009 | Paints and varnishes Evaluation of properties of coating systems related to the application process Part 1: Relevant vocabulary and preparation of test panels |
| BS EN ISO 11997-2:2013 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light |
| EN ISO 11890-2:2013 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013) |
| EN ISO 2812-2:2007 | Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007) |
| I.S. EN ISO 2811-4:2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 4: PRESSURE CUP METHOD |
| I.S. EN ISO 6860:2006 | PAINTS AND VARNISHES - BEND TEST (CONICAL MANDREL) |
| I.S. EN ISO 1520:2006 | PAINTS AND VARNISHES - CUPPING TEST |
| ONORM EN ISO 2409 : 2013 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| I.S. EN ISO 9038:2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| I.S. EN ISO 6272-1:2011 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER |
| EN ISO 20566:2013 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| I.S. EN ISO 4624:2016 | PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION (ISO 4624:2016) |
| I.S. EN ISO 15181-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 1: GENERAL METHOD FOR EXTRACTION OF BIOCIDES |
| DIN EN ISO 2811-4:2011-06 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
| I.S. EN ISO 2811-1:2016 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 1: PYCNOMETER METHOD (ISO 2811-1:2016) |
| I.S. EN ISO 1519:2011 | PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
| DIN EN ISO 11341:1998-02 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| UNI EN ISO 2409 : 2013 | PAINTS AND VARNISHES - CROSS-CUT TEST |
| I.S. EN ISO 2811-3:2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
| I.S. EN ISO 11998:2006 | PAINTS AND VARNISHES - DETERMINATION OF WET-SCRUB RESISTANCE AND CLEANABILITY OF COATINGS |
| I.S. EN ISO 1522:2006 | PAINTS AND VARNISHES - PENDULUM DAMPING TEST |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 11997-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| I.S. EN ISO 6272-2:2011 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER |
| I.S. EN ISO 4623-2:2016 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES (ISO 4623-2:2016) |
| I.S. EN ISO 11890-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| I.S. EN ISO 9227:2017 | CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS (ISO 9227:2017) |
| ONORM EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| DIN EN ISO 2811-2:2011-06 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| DIN EN ISO 2811-3:2011-06 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011); German version EN ISO 2811-3:2011 |
| I.S. EN ISO 3679:2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| I.S. EN ISO 2811-2:2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 2: IMMERSED BODY (PLUMMET) METHOD |
| I.S. EN ISO 20566:2013 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH (ISO 20566:2013) |
| I.S. EN ISO 3248:2016 | PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF HEAT (ISO 3248:2016) |
| BS 3900-A10:1998 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating |
| BS 3900-G7(1998) : 1998 AMD 12096 | METHODS OF TEST FOR PAINTS - DETERMINATION OF THE EFFECT OF HEAT |
| BS 3900-D1:1978 | Methods of test for paints. Optical tests on paint films Visual comparison of the colour of paints |
| BS 3900-D11(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| BS 3900-A8:1986 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Test for flash/no flash (closed cup equilibrium method) |
| BS 3900-F12(1997) : 1997 AMD 13288 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| BS 3900-B4:1986 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of total lead in paints and similar materials |
| BS 3900-A13:1986 | Methods of test for paints Test for flash/no flash (rapid equilibrium method) |
| BS 3900-A10:1985 | Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating |
| BS 3900-D5:1995 | Methods of test for paints. Optical tests on paint films Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° |
| BS 3900-D1(1998) : 1998 AMD 13287 | METHODS OF TEST FOR PAINTS - VISUAL COMPARISON OF THE COLOUR OF PAINTS |
| BS 3900-E5(1998) : 1998 AMD 12090 | METHODS OF TEST FOR PAINTS - PENDULUM DAMPING TESTING |
| BS 3900-A9:1986 | Methods of test for paints Determination of flashpoint (closed cup equilibrium method) |
| BS 3900-D5(1997) : 1997 AMD 10590 | METHODS OF TEST FOR PAINTS - MEASUREMENT OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20 DEGREES, 60 DEGREES AND 85 DEGREES |
| BS 3900-C6(2000) : 2000 AMD 14122 | METHODS OF TEST FOR PAINTS - GROUP C: TESTS ASSOCIATED WITH PAINT FILM FORMATION - PART C6: DETERMINATION OF FINENESS OF GRIND |
| BS 3900-D5:1980 | Methods of test for paints. Optical tests on paint films Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° |
| I.S. EN 4159:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
| BS ISO 20566 : 2005 AMD 16860 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY CAR-WASH |
| BS 3900-B17:1991 | Methods of test for paints Preparation of acid extracts from dried paint films |
| 14/30292470 DC : 0 | BS EN 15457 - PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
| I.S. EN ISO 4623:1995 | PAINTS AND VARNISHES - FILIFORM CORROSION TEST ON STEEL |
| I.S. EN ISO 3680:2004 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 3900-A22(1998) : 1998 AMD 13284 | METHODS OF TEST FOR PAINTS - DETERMINATION OF DENSITY BY THE PRESSURE CUP METHOD |
| BS EN ISO 2812-5:2007 | Paints and varnishes. Determination of resistance to liquids Temperature-gradient oven method |
| I.S. EN ISO 7783-1:1999 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS |
| 04/30012206 DC : DRAFT AUG 2004 | PREN 4592 - AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF INFRARED REFLECTANCE |
| BS EN 4595:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance |
| BS EN ISO 9117-3:2010 | Paints and varnishes. Drying tests Surface-drying test using ballotini |
| BS EN ISO 2812-1:2017 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
| I.S. EN 4170:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF RESISTANCE TO COLD CRACK TEMPERATURE CYCLE |
| 11/30215685 DC : 0 | BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| 10/30206993 DC : 0 | BS EN ISO 2431 - PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS |
| NF EN ISO 9117-2 : 2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
| I.S. EN ISO 11507:2007 | PAINTS AND VARNISHES - EXPOSURE OF COATINGS TO ARTIFICIAL WEATHERING - EXPOSURE TO FLUORESCENT UV LAMPS AND WATER |
| 11/30197271 DC : DRAFT NOV 2011 | BS EN ISO 9038 - DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| UNE-EN ISO 16927:2014 | Paints and varnishes - Determination of the overcoatability and recoatability of a coating (ISO 16927:2014) |
| PREN 927-10 : DRAFT 2017 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| 09/30196695 DC : 0 | BS ISO 1519 - PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
| BS ISO 13885-1:2008 | Binders for paints and varnishes. Gel permeation chromatography (GPC) Tetrahydrofuran (THF) as eluent |
| BS ISO 9038 : 2002 AMD 15159 | TEST FOR SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| BS EN ISO 20567-3:2012 | Paints and varnishes. Determination of stone-chip resistance of coatings Single-impact test with a free-flying impact body |
| UNI EN 4593 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SOLAR ABSORPTANCE |
| 10/30228342 DC : DRAFT SEP 2010 | BS EN ISO 20566 - PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH |
| BS EN 2434-002:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish High chemical resistance |
| DIN EN ISO 9117-3:2010-07 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
| 12/30245688 DC : 0 | BS EN ISO 16925 - PAINTS AND VARNISHES - DETERMINATION OF THE RESISTANCE OF COATINGS TO HIGH-PRESSURE WATER-JETTING |
| UNI EN ISO 15091 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE |
| DIN EN 15457:2014-11 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
| DIN EN ISO 3233-2:2014-10 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF THE DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014) |
| DIN EN ISO 12137:2012-01 | Paints and varnishes - Determination of mar resistance (ISO 12137:2011) |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| BS 2000-523(2015) : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 3900-E11(1985) : 1985 AMD 8612 | METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - BEND TEST (CONICAL MANDREL) |
| DIN EN ISO 7783:2012-02 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| I.S. EN ISO 9117-4:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER (ISO 9117-4:2012) |
| 09/30207407 DC : 0 | BS ISO 13007-3 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 3: DEFINITIONS AND SPECIFICATIONS FOR GROUTS |
| 11/30217717 DC : 0 | BS EN ISO 15091 - PAINTS AND VARNISHES - DETERMINATION OF THE ELECTRICAL CONDUCTIVITY AND THE SPECIFIC ELECTRICAL RESISTIVITY |
| DIN EN ISO 17132:2008-01 | PAINTS AND VARNISHES - T-BEND TEST |
| 17/30351726 DC : 0 | BS ISO 21545 - PAINTS AND VARNISHES - DETERMINATION OF SETTLING |
| BS 3900-A26(2000) : 2000 AMD 16873 | METHODS OF TEST FOR PAINTS - TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - DETERMINATION OF PIGMENT CONTENT BY CENTRIFUGE |
| BS 3900-A23(2000) : 2000 AMD 13285 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
| 17/30344544 DC : 0 | BS EN ISO 2812-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 2: WATER IMMERSION METHOD |
| 02/123755 DC : DRAFT OCT 2002 | ISO 20566 - PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY CAR WASH |
| PREN 2434-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 04: HIGH FLEXIBILITY |
| BS EN 4170:2007 | Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle |
| SAE AMS3095A | Paint: High Gloss For Airline Exterior System |
| BS ISO 16862 : 2003 AMD 16867 | PAINTS AND VARNISHES - EVALUATION OF SAG RESISTANCE |
| BS 3900-A18:1993 | Methods of test for paints- determination of the pot life of liquid systems preparation and conditioning of samples and guidelines for testing. |
| UNE-EN ISO 15184:2013 | Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2012) |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| PREN 2435-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 03: HIGH CORROSION AND FLUID RESISTANCE |
| PREN 2435-4 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 04: HIGH CORROSION AND FLUID RESISTANCE WITH SURFACE PREPARATION TOLERANCE |
| ONORM EN ISO 2812-5 : 2008 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
| PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN ISO 2431:2011 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| I.S. EN 4594:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| ISO 2811:1974 | Paints and varnishes — Determination of density |
| UNE-EN ISO 7783:2012 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
| ISO 13885-1:2008 | Binders for paints and varnishes Gel permeation chromatography (GPC) Part 1: Tetrahydrofuran (THF) as eluent |
| I.S. EN ISO 16474-1:2013 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
| NF EN ISO 7783 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
| UNI EN 4594 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| I.S. EN ISO 3233-1:2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| I.S. EN ISO 15091:2012 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE (ISO 15091:2012) |
| DIN EN ISO 2812-5:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
| DIN EN ISO 16474-1:2014-03 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
| UNI EN ISO 16474-1 : 2014 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| ONORM EN ISO 16474-1 : 2014 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
| BS EN ISO 2812-2:2007 | Paints and varnishes. Determination of resistance to liquids Water immersion method |
| UNE-EN ISO 2812-4:2018 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
| UNI EN ISO 3233-1 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE |
| UNI EN ISO 16927 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING |
| UNI EN ISO 2812-3 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM |
| UNI EN ISO 9117-6 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 6: PRINT-FREE TEST |
| NF EN ISO 12137 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE |
| I.S. EN ISO 3251:2008 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE-MATTER CONTENT |
| ISO 2812-4:2017 | Paints and varnishes — Determination of resistance to liquids — Part 4: Spotting methods |
| ISO 11347:2012 | Ships and marine technology — Large yachts — Measurement and assessment of the visual appearance of coatings |
| ISO 18314-1:2015 | Analytical colorimetry Part 1: Practical colour measurement |
| EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN ISO 6504-3:2007 | Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) |
| ONORM EN ISO 2431 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| DIN EN ISO 6860:2006-06 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| EN ISO 3668:2001 | Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
| DIN EN ISO 16862:2006-08 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
| DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| UNE-EN ISO 3248:2017 | Paints and varnishes - Determination of the effect of heat (ISO 3248:2016) |
| DIN EN ISO 15528:2013-12 | PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013) |
| DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| DIN EN ISO 2815:2003-10 | PAINTS AND VARNISHES - BUCHHOLZ INDENTATION TEST |
| DIN EN ISO 1519:2011-04 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| DIN EN ISO 15181-1:2007-10 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| ISO 6272-1:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 1: Falling-weight test, large-area indenter |
| BS EN 2435-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion and fluid resistance |
| BS EN ISO 3680:2004 | Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| BS EN ISO 4623:1995 | Paints and varnishes. Filiform corrosion test on steel |
| BS EN 2436-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion and fluid resistance with surface preparation tolerance |
| ISO 17132:2007 | Paints and varnishes T-bend test |
| ISO 16862:2003 | Paints and varnishes Evaluation of sag resistance |
| BS EN 12617-1:2003 | Products and systems for the protection and repair of concrete structures. Test methods Determination of linear shrinkage for polymers and surface protection systems (SPS) |
| ISO 11341:2004 | Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
| BS EN 13966-1:2003 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials Flat panels |
| ISO 1517:1973 | Paints and varnishes Surface-drying test Ballotini method |
| ISO 6504-3:2006 | Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| UNE-EN ISO 6272-1:2012 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| BS EN ISO 15710:2006 | Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| UNE-EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| ISO 3233-2:2014 | Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle |
| UNE-EN ISO 6272-2:2012 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| ISO 3248:2016 | Paints and varnishes Determination of the effect of heat |
| ISO 15181-1:2007 | Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides |
| UNE-EN ISO 3233-1:2013 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
| I.S. EN ISO 1524:2013 | PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013) |
| UNI EN ISO 15528 : 2014 | PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING |
| UNE-EN ISO 3233-2:2014 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014) |
| DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN ISO 2812-5:2007 | Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2007) |
| EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| I.S. EN ISO 2409:2013 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| ONORM EN ISO 1524 : 2013 | PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013) |
| UNI EN ISO 1524 : 2013 | PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND |
| I.S. EN ISO 15528:2013 | PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING (ISO 15528:2013) |
| I.S. EN ISO 11890-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013) |
| UNE-EN 927-3:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| UNI EN ISO 11890-2 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD |
| EN ISO 1522:2006 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| EN ISO 9117-5:2012 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| EN 2435-002:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance |
| EN ISO 4623-2:2016 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
| EN 2435-004:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance |
| EN 2434-002:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 002: High chemical resistance |
| EN ISO 17132:2007 | Paints and varnishes - T-bend test (ISO 17132:2007) |
| UNI EN 1062-3 : 2008 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| UNI EN ISO 6272-1 : 2013 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 1: FALLING-WEIGHT TEST, LARGE-AREA INDENTER |
| UNI EN ISO 2811-3 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
| UNI EN ISO 2431 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS |
| UNI EN ISO 6272-2 : 2013 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER |
| UNI EN ISO 11997-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| UNI EN ISO 1519 : 2011 | PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
| EN ISO 6860:2006 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| UNI EN ISO 2811-2 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 2: IMMERSED BODY (PLUMMET) METHOD |
| UNI EN ISO 2811-4 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 4: PRESSURE CUP METHOD |
| EN 2434-004:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 004: High flexibility |
| ONORM EN 15458 : 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
| ONORM EN 15457 : 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST FUNGI |
| UNE-EN ISO 28199-1:2010 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) |
| UNE-EN ISO 1518-2:2012 | Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011) |
| BS 3900-C8(1978) : 1978 AMD 8613 | METHODS OF TEST FOR PAINTS - TESTS ASSOCIATED WITH PAINT FILM FORMATION - PRINT-FREE TEST |
| BS 3900-D11:1998 | Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
| 14/30311300 DC : 0 | BS EN ISO 2811-1 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 1: PYCNOMETER METHOD |
| DIN EN ISO 16925:2014-06 | Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014) |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| DIN EN 15458:2014-11 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
| I.S. EN ISO 20567-3:2012 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
| 17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
| DIN ISO 1520:1982-02 | PAINTS AND VARNISHES - CUPPING TEST |
| 08/30189225 DC : DRAFT DEC 2008 | BS EN ISO 7783 - PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD |
| BS EN 15458:2014 | Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae |
| 12/30249839 DC : 0 | BS EN ISO 9227 - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS |
| 06/30155770 DC : DRAFT SEP 2006 | BS ISO 3251 - PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| BS ISO 15710 : 2002 AMD 16861 | PAINTS AND VARNISHES - CORROSION TESTING BY ALTERNATE IMMERSION IN AND REMOVAL FROM A BUFFERED SODIUM CHLORIDE SOLUTION |
| BS EN ISO 9117-4:2012 | Paints and varnishes. Drying tests Test using a mechanical recorder |
| BS 3900-F19(2000) : 2000 AMD 16874 | METHODS OF TEST FOR PAINT - DURABILITY TESTS ON PAINT FILMS - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| 09/30207401 DC : 0 | BS ISO 13007-1 - CERAMIC TILES - GROUTS AND ADHESIVES - PART 1: DEFINITIONS AND SPECIFICATIONS FOR ADHESIVES |
| I.S. EN ISO 9117-5:2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST (ISO 9117-5:2012) |
| 10/30197386 DC : 0 | BS ISO 12013-2 - PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE-DAMPED OSCILLATION METHOD - PART 2: GLASS-TRANSITION TEMPERATURE |
| BS 3900-F18:1998 | Methods of test for paint. Durability tests on paint films Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle |
| 06/30148614 DC : 0 | EN ISO 17132 - PAINTS AND VARNISHES - T-BEND TEST |
| 09/30196706 DC : DRAFT DEC 2009 | BS ISO 2811-3 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
| 09/30196701 DC : DRAFT DEC 2009 | BS ISO 2811-2 - PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 2: IMMERSED BODY (PLUMMET) METHOD |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 4622:1995 | PAINTS AND VARNISHES - PRESSURE TEST FOR STACKABILITY |
| I.S. EN ISO 12137-2:2006 | PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE - PART 2: METHOD USING A POINTED STYLUS |
| UNI EN ISO 9117-3 : 2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI |
| 03/310937 DC : DRAFT JUNE 2003 | EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 04/19994774 DC : DRAFT AUG 2004 | EN 4406 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - ABRASION RESISTANT |
| UNI EN 2434-001 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 001: BASIC REQUIREMENTS |
| DIN 55680:1983-08 | PAINTS, VARNISHES AND RELATED PRODUCTS; FLASH/NO FLASH TEST; RAPID EQUILIBRIUM METHOD; ISO 3680 MODIFIED |
| 14/30309767 DC : 0 | BS EN ISO 20567-2 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY |
| DIN EN ISO 16927 E : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014) |
| BS 3900-E12.1:2000 | Methods of test for paints Determination of Knoop hardness by measurement of the indentation length using a microscope |
| 08/30189495 DC : DRAFT OCT 2008 | BS EN ISO 9117-3 - PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI |
| BS EN 4593:2011 | Aerospace series. Paints and varnishes. Determination of solar absorptance |
| BS 3900-A19(1998) : 1998 AMD 13290 | METHODS OF TEST FOR PAINTS - DETERMINATION OF DENSITY BY THE PYKNOMETER METHOD |
| 17/30361500 DC : 0 | BS EN ISO 4623-1 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
| UNI EN ISO 9117-4 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 4: TEST USING A MECHANICAL RECORDER |
| UNI EN 15458 : 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
| 10/30207417 DC : 0 | BS EN ISO 2409 - PAINTS AND VARNISHES - CROSS-CUT TEST |
| BS 2000-34(2002) : 2002 AMD 15248 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| BS ISO 6272-2 : 2002 AMD 16866 | PAINTS AND VARNISHES - RAPID-DEFORMATION (IMPACT RESISTANCE) TESTS - PART 2: FALLING-WEIGHT TEST, SMALL-AREA INDENTER |
| BS 3900-F20(2004) : 2004 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES |
| BS 3900-E13(1993) : 1993 AMD 8354 | METHODS OF TEST FOR PAINTS - FALLING WEIGHT RESISTANCE (IMPACT) |
| DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| BS ISO 12013-1:2012 | Paints and varnishes. Determination of curing characteristics using a free damped oscillation method Start temperature of the curing reaction |
| ONORM EN ISO 3251 : 2008 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE-MATTER CONTENT |
| BS EN ISO 28199-1:2009 | Paints and varnishes. Evaluation of properties of coating systems related to the application process Relevant vocabulary and preparation of test panels |
| DIN EN ISO 9117-4:2012-11 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
| BS 3900-A7.1(2000) : 2000 AMD 16865 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A7: DETERMINATION OF THE VISCOSITY OF PAINT AT A HIGH RATE OF SHEAR - SECTION A7-1: CONE AND PLATE VISCOMETER |
| BS 3900-A27(2000) : 2000 AMD 16872 | METHODS OF TEST FOR PAINTS - TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - DETERMINATION OF PIGMENT CONTENT BY ASHING |
| BS EN ISO 16925:2014 | Paints and varnishes. Determination of the resistance of coatings to pressure water-jetting |
| BS 3900-A28(2000) : 2000 AMD 16871 | METHODS OF TEST FOR PAINTS - TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - DETERMINATION OF PIGMENT CONTENT BY FILTRATION |
| 13/30285144 DC : 0 | BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 3900-A7.2(2003) : 2003 AMD 16864 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A7: DETERMINATION OF THE VISCOSITY OF PAINT AT A HIGH RATE OF SHEAR - SECTION A7-2: DISC OR BALL VISCOMETER OPERATED AT A SPECIFIED SPEED |
| BS EN 2434-001:2010 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish Basic requirements |
| BS 3900-E10:1979 | Methods of test for paints Pull-off test for adhesion |
| BS EN ISO 9117-2:2010 | Paints and varnishes. Drying tests Pressure test for stackability |
| NF EN ISO 1518-1 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
| BS EN ISO 9117-5:2012 | Paints and varnishes. Drying tests Modified Bandow-Wolff test |
| I.S. EN 2434-002:2010 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 002: HIGH CHEMICAL RESISTANCE |
| BS 3900-E16(2000) : 2000 AMD 16868 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (RECIPROCATING TEST PANEL METHOD) |
| BS 3900-G9(1996) : 1996 AMD 10384 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE OF FREE FILMS (DISH METHOD) |
| UNI EN 2434-002 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 002: HIGH CHEMICAL RESISTANCE |
| UNI EN ISO 28199-1 : 2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| UNI EN ISO 9117-2 : 2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
| PREN 2434-1 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 01: BASIC REQUIREMENTS |
| PREN 2435-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING PRIMER - PART 02: HIGH CORROSION RESISTANCE |
| DIN ISO 1516:1987-06 | PAINTS, VARNISHES, PETROLEUM AND RELATED PRODUCTS - FLASH/NO FLASH TEST - CLOSED CUP EQUILIBRIUM METHOD |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| PREN 4588 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
| NF EN ISO 28199-1 : 2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| PREN 4592 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF INFRARED REFLECTANCE |
| PREN 4171 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
| PREN 4158 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF ELECTRICAL SURFACE RESISTANCE OF CONDUCTIVE LAYERS |
| PREN 4159 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
| UNI EN 4160 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| UNI EN ISO 16925 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE RESISTANCE OF COATINGS TO PRESSURE WATER-JETTING |
| UNE-EN ISO 20567-3:2013 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012) |
| I.S. EN ISO 11997-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 1: WET (SALT FOG)/DRY/HUMID (ISO 11997-1:2017) |
| ISO/TS 19392-2:2018 | Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 2: Determination and evaluation of resistance to rain erosion using rotating arm |
| UNI EN ISO 9117-5 : 2012 | PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST |
| ISO 6441-1:1999 | Paints and varnishes Determination of micro-indentation hardness Part 1: Knoop hardness by measurement of indentation length |
| I.S. EN ISO 9117-3:2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI |
| ISO 6441-2:1999 | Paints and varnishes Determination of micro-indentation hardness Part 2: Knoop hardness by measurement of indentation depth under load |
| ONORM EN ISO 9038 : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| UNE-EN ISO 16474-1:2014 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-1:2013) |
| EN ISO 11997-1:2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
| BS EN ISO 2812-3:2012 | Paints and varnishes. Determination of resistance to liquids Method using an absorbent medium |
| UNE-EN ISO 9117-5:2013 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| PREN 15458 : DRAFT 2014 | PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
| I.S. EN ISO 17132:2007 | PAINTS AND VARNISHES - T-BEND TEST |
| ISO 12013-1:2012 | Paints and varnishes — Determination of curing characteristics using a free damped oscillation method — Part 1: Start temperature of the curing reaction |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| ISO 2812-2:2007 | Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method |
| UNI EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| I.S. EN ISO 9117-1:2009 | PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME |
| I.S. EN ISO 9514:2005 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
| I.S. EN ISO 1518-1:2011 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD |
| I.S. EN ISO 2812-3:2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| EN ISO 15184:2012 | Paints and varnishes - Determination of film hardness by pencil test (ISO 15184:2012) |
| EN ISO 15091:2012 | Paints and varnishes - Determination of electrical conductivity and resistance (ISO 15091:2012) |
| ONORM EN ISO 3233-1 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013) |
| UNE-EN ISO 2431:2012 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| DIN EN ISO 2431:2012-03 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011) |
| DIN EN ISO 1524:2013-06 | PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND (ISO 1524:2013) |
| DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| BS EN ISO 2409:2013 | Paints and varnishes. Cross-cut test |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
| BS EN ISO 2431:2011 | Paints and varnishes. Determination of flow time by use of flow cups |
| ISO 2884-2:2003 | Paints and varnishes — Determination of viscosity using rotary viscometers — Part 2: Disc or ball viscometer operated at a specified speed |
| BS EN 1062-7:2004 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of crack bridging properties |
| BS EN ISO 11341:2004 | Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation |
| BS EN ISO 7783-1:2000 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of water-vapour transmission rate of free films (dish method) |
| ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
| UNE-EN ISO 1522:2007 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| ONORM EN ISO 15184 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012) |
| BS EN ISO 3668:2001 | Paints and varnishes. Visual comparison of the colour of paints |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| BS EN ISO 15711:2004 | Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water |
| BS EN ISO 12137-2:2006 | Paints and varnishes. Determination of mar resistance Method using a pointed stylus |
| BS EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| BS EN ISO 7253:2001 | Paints and varnishes. Determination of resistance to neutral salt spray (fog) |
| ISO 9117-1:2009 | Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
| ISO 20566:2013 | Paints and varnishes Determination of the scratch resistance of a coating system using a laboratory-scale car-wash |
| ISO 11890-2:2013 | Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method |
| BS EN ISO 14680-1:2006 | Paints and varnishes. Determination of pigment content Centrifuge method |
| ISO 12137-2:1997 | Paints and varnishes Determination of mar resistance Part 2: Method using a pointed stylus |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
| UNE-EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| UNE-EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| BS EN ISO 11890-2:2013 | Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method |
| UNE-EN ISO 11997-2:2014 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| BS EN 13529:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
| BS EN 927-3:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood Natural weathering test |
| BS EN ISO 1522:2006 | Paints and varnishes. Pendulum damping test |
| BS EN ISO 6272-2:2011 | Paints and varnishes. Rapid-deformation (impact resistance) tests Falling-weight test, small-area indenter |
| ISO 4623-2:2016 | Paints and varnishes Determination of resistance to filiform corrosion Part 2: Aluminium substrates |
| BS EN ISO 11507:2007 | Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water |
| ISO 9117-5:2012 | Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| ISO 9117-6:2012 | Paints and varnishes — Drying tests — Part 6: Print-free test |
| BS EN ISO 1519:2011 | Paints and varnishes. Bend test (cylindrical mandrel) |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| ISO 2884-1:1999 | Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear |
| ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
| ISO 6272:1993 | Paints and varnishes — Falling-weight test |
| ISO 15710:2002 | Paints and varnishes — Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| ISO 12137:2011 | Paints and varnishes — Determination of mar resistance |
| ISO 11998:2006 | Paints and varnishes — Determination of wet-scrub resistance and cleanability of coatings |
| ISO 9117-4:2012 | Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder |
| ISO 1518:1992 | Paints and varnishes Scratch test |
| ISO 9117-2:2010 | Paints and varnishes — Drying tests — Part 2: Pressure test for stackability |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 6272-2:2011 | Paints and varnishes — Rapid-deformation (impact resistance) tests — Part 2: Falling-weight test, small-area indenter |
| BS EN 4592:2006 | Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance |
| BS EN ISO 16862:2006 | Paints and varnishes. Evaluation of sag resistance |
| BS EN ISO 4624:2016 | Paints and varnishes. Pull-off test for adhesion |
| ISO 9038:2013 | Determination of sustained combustibility of liquids |
| ISO 3678:1976 | Paints and varnishes — Print-free test |
| ISO 1520:2006 | Paints and varnishes Cupping test |
| BS EN ISO 6270:1995 | Paints and varnishes. Determination of resistance to humidity (continuous condensation) |
| ISO 1524:2013 | Paints, varnishes and printing inks Determination of fineness of grind |
| ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
| ISO 20567-3:2012 | Paints and varnishes — Determination of stone-chip resistance of coatings — Part 3: Single-impact test with a free-flying impact body |
| ISO 9117-3:2010 | Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini |
| BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| BS EN 4158:2006 | Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers |
| BS EN ISO 3251:2008 | Paints, varnishes and plastics. Determination of non- volatile-matter content |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| BS EN ISO 9514:2005 | Paints and varnishes. Determination of the pot life of multicomponent coating systems. Preparation and conditioning of samples and guidelines for testing |
| BS EN 1062-3:2008 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of liquid water permeability |
| UNE-EN ISO 15528:2014 | Paints, varnishes and raw materials for paints and varnishes - Sampling (ISO 15528:2013) |
| BS EN ISO 3248:2001 | Paints and varnishes. Determination of the effect of heat |
| ISO 14680-2:2000 | Paints and varnishes Determination of pigment content Part 2: Ashing method |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| ISO 16925:2014 | Paints and varnishes Determination of the resistance of coatings to pressure water-jetting |
| UNE-EN ISO 20566:2013 | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory-scale car-wash (ISO 20566:2013) |
| BS EN 1062-6:2002 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination of carbon dioxide permeability |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 11507:2007 | Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water |
| ISO 16927:2014 | Paints and varnishes — Determination of the overcoatability and recoatability of a coating |
| UNE-EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| UNE-EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| ISO 4622:1992 | Paints and varnishes Pressure test for stackability |
| BS EN ISO 2884-2:2006 | Paints and varnishes. Determination of viscosity using rotary viscometers Disc or ball viscometer operated at a specified speed |
| ISO 14680-3:2000 | Paints and varnishes Determination of pigment content Part 3: Filtration method |
| BS EN ISO 6504-1:2006 | Paints and varnishes. Determination of hiding power Kubelka-Munk method for white and light-coloured paints |
| BS EN ISO 2811-1:2016 | Paints and varnishes. Determination of density Pycnometer method |
| UNE-EN ISO 2812-1:2018 | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017) |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| BS EN ISO 15181-1:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints General method for extraction of biocides |
| BS EN ISO 6860:2006 | Paints and varnishes. Bend test (conical mandrel) |
| EN 4593:2011 | Aerospace series - Paints and varnishes - Determination of solar absorptance |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 20567-3:2012 | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 3: Single-impact test with a free-flying impact body (ISO 20567-3:2012) |
| EN 927-3:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test |
| EN ISO 3248:2016 | Paints and varnishes - Determination of the effect of heat (ISO 3248:2016) |
| EN 4171:2011 | Aerospace series - Paints and varnishes - Test method for determination of phosphoric acid index |
| EN ISO 15711:2004 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
| EN ISO 3233-2:2014 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014) |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN ISO 9117-3:2010 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| EN ISO 9117-4:2012 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
| EN ISO 12137-1:2006 | Paints and varnishes - Determination of mar resistance - Part 1: Method using a curved stylus (ISO 12137-1:1997, including Technical Corrigendum 1:1998) |
| EN ISO 16925:2014 | Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014) |
| EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| EN ISO 3233-1:2013 | Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013) |
| EN ISO 1518-2:2011 | Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011) |
| EN ISO 2884-1:2006 | Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear (ISO 2884-1:1999) |
| EN ISO 15710:2006 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
| EN 4170:2007 | Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle |
| EN ISO 11341:2004 | Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004) |
| EN 4594:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance |
| EN ISO 4623 : 1995 | PAINTS AND VARNISHES - FILIFORM CORROSION TEST ON STEEL |
| EN ISO 11998:2006 | Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings (ISO 11998:2006) |
| EN ISO 1518:2000 | Paints and varnishes - Scratch test (ISO 1518:1992) |
| EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
| EN 4592:2006 | Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance |
| EN 29117 : 1992 | PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST |
| EN ISO 6272-2:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 9117-6:2012 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| EN 2436-001:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 001: Basic requirements |
| EN 2434-003:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior |
| EN ISO 6504-1:2006 | Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints (ISO 6504-1:1983) |
| EN 4406:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant |
| EN ISO 9117-2:2010 | Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
| EN 4160:2011 | Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure |
| EN 4158:2006 | Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers |
| EN 15457:2014 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| EN ISO 15181-1:2007 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
| EN 24624 : 1992 | PAINTS AND VARNISHES - PULL-OFF TEST |
| EN ISO 16862:2006 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
| EN 15458:2014 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
| EN 2436-003:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 003: High corrosion and fluid resistance |
| EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN ISO 14680-2:2006 | Paints and varnishes - Determination of pigment content - Part 2: Ashing method (ISO 14680-2:2000) |
| EN ISO 7783-1:1999 | Paints and varnishes - Determination of water-vapour transmission rate - Part 1: Dish method for free films (ISO 7783-1:1996, including Technical Corrigendum 1:1998) |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| EN ISO 4622 : 1994 | PAINTS AND VARNISHES - PRESSURE TEST FOR STACKABILITY |
| EN 4595:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance |
| EN 2434-001:2010 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 001: Basic requirements |
| EN 2435-003:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance |
| EN ISO 2884-2:2006 | Paints and varnishes - Determination of viscosity using rotary viscometers - Part 2: Disc or ball viscometer operated at a specified speed (ISO 2884-2:2003) |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
| EN ISO 7253 : 2001 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
| EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
| EN ISO 14680-3:2006 | Paints and varnishes - Determination of pigment content - Part 3: Filtration method (ISO 14680-3:2000) |
| EN ISO 12137-2:2006 | Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus (ISO 12137-2:1997) |
| EN 2436-004:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| EN ISO 6272-1:2011 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| EN ISO 11507:2007 | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007) |
| EN 4159:2011 | Aerospace series - Paints and varnishes - Determination of resistance to microbial growth |
| EN ISO 16927:2014 | Paints and varnishes - Determination of the overcoatability and recoatability of a coating (ISO 16927:2014) |
| EN ISO 3678:1995 | Paints and varnishes - Print-free test (ISO 3678:1976) |
| EN 2436-002:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 002: High corrosion resistance |
| EN ISO 14680-1:2006 | Paints and varnishes - Determination of pigment content - Part 1: Centrifuge method (ISO 14680-1:2000) |
| EN 2436-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance |
| EN 4588:2007 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| EN ISO 1518-1:2011 | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method (ISO 1518-1:2011) |
| EN 13966-1:2003 | Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials - Part 1: Flat panels |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| DIN EN ISO 16927:2014-06 | PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014) |
| BS EN ISO 12137:2011 | Paints and varnishes. Determination of mar resistance |
| ISO 3233:1998 | Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating |
| 07/30169420 DC : 0 | BS ISO 13885-1 - BINDERS FOR PAINTS AND VARNISHES - GEL PERMEATION CHROMATOGRAPHY (GPC) - PART 1: TETRAHYDROFURAN (THF) AS ELUENT |
| BS 3900-B16:1990 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films Determination of total mercury |
| 14/30292467 DC : 0 | BS EN 15458 - PAINTS AND VARNISHES - LABORATORY METHOD FOR TESTING THE EFFICACY OF FILM PRESERVATIVES IN A COATING AGAINST ALGAE |
| 11/30229688 DC : 0 | BS EN ISO 1524 - PAINTS, VARNISHES AND PRINTING INKS - DETERMINATION OF FINENESS OF GRIND |
| 16/30327443 DC : DRAFT JAN 2016 | BS EN ISO 12944-7 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE COATING SYSTEMS - PART 7: EXECUTION AND SUPERVISION OF PAINT WORK |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 11341:2004 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| I.S. EN ISO 1518:2000 | PAINTS AND VARNISHES - SCRATCH TEST |
| 17/30364312 DC : 0 | BS EN 927-10 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 10: RESISTANCE TO BLOCKING OF PAINTS AND VARNISHES ON WOOD |
| UNE-EN 15458:2014 | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
| I.S. EN 29117:1993 | PAINTS AND VARNISHES - DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME - METHOD OF TEST |
| 08/30189484 DC : DRAFT OCT 2008 | BS EN ISO 9117-2 - PAINTS AND VARNISHES - DRYING TESTS - PART 2: PRESSURE TEST FOR STACKABILITY |
| UNI EN ISO 9117-1 : 2009 | PAINTS AND VARNISHES - DRYING TESTS - PART 1: DETERMINATION OF THROUGH-DRY STATE AND THROUGH-DRY TIME |
| 10/30197383 DC : 0 | BS ISO 12013-1 - PAINTS AND VARNISHES - DETERMINATION OF CURING CHARACTERISTICS USING A FREE-DAMPED OSCILLATION METHOD - PART 1: START TEMPERATURE OF REACTION |
| 11/30217720 DC : 0 | BS EN ISO 20567-3 - PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY |
| ONORM EN ISO 2812-3 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| 15/30309734 DC : 0 | BS ISO 19396-2 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 2: PH ELECTRODES WITH ISFET TECHNOLOGY |
| I.S. EN ISO 12944-7:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 7: EXECUTION AND SUPERVISION OF PAINT WORK (ISO 12944-7:2017) |
| 04/19988924 DC : DRAFT AUG 2004 | EN 4170 - AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF RESISTANCE TO COLD CRACK TEMPERATURE CYCLE |
| 10/30210872 DC : 0 | BS EN ISO 9117-5 - PAINTS AND VARNISHES - DRYING TESTS - PART 5: MODIFIED BANDOW-WOLFF TEST |
| STANAG 2836 : 0 | REMOVABLE PAINTS FOR CAMOUFLAGE |
| 96/120232 DC : DRAFT FEB 1996 | BS 3900-E20: METHODS OF TEST FOR PAINTS - DETERMINATION OF PENCIL HARDNESS |
| DIN EN ISO 16925 E : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE RESISTANCE OF COATINGS TO PRESSURE WATER-JETTING (ISO 16925:2014) |
| BS 6782-14:1999 | Binders for paints Gel permeation chromatography (GPC) with tetrahydrofuran (THF) as eluent |
| ONORM EN ISO 7783 : 2012 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
| BS 2000-523(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| NF EN ISO 9117-3 : 2010 | PAINTS AND VARNISHES - DRYING TESTS - PART 3: SURFACE-DRYING TEST USING BALLOTINI |
| BS EN 4160:2011 | Aerospace series. Paints and varnishes. Determination of the effect of thermal exposure |
| PD CEN/TS 16499:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Resistance to blocking of paints and varnishes on wood |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| BS 3900-E15(1997) : 1997 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL) |
| 12/30215682 DC : 0 | BS EN ISO 3233-2 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: DETERMINATION BY MEASUREMENT OF THE DRY-FILM DENSITY |
| UNI EN 2434-003 : 2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 003: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
| UNI EN 4595 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| BS EN ISO 17132:2007 | Paints and varnishes. T-bend test |
| BS ISO 12013-2:2012 | Paints and varnishes. Determination of curing characteristics using a free damped oscillation method Glass transition temperature |
| BS 3900-E14(1997) : 1997 AMD 16870 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) |
| BS ISO 19396-1:2017 | Paints and varnishes. Determination of pH value pH electrodes with glass membrane |
| 12/30229697 DC : 0 | BS EN ISO 15528 - PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING |
| ISO 19396-2:2017 | Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology |
| BS EN ISO 7783:2011 | Paints and varnishes. Determination of water-vapour transmission properties. Cup method |
| BS 3900-E19:1999 | Methods of test for paints Determination of film hardness by pencil test |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| ASTM D 8008 : 2015 | Standard Practice for Representative Field Sampling of Traffic Paints |
| PREN 4595 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| 02/123756 DC : DRAFT OCT 2002 | ISO 20567-1 - PAINTS AND VARNISHES - DETERMINATION OF STONE CHIP RESISTANCE OF COATINGS - PART 1: MULTI IMPACT TEST |
| ONORM EN ISO 9514 : 2005 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
| PREN 2434-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 03: FLEXIBLE AND HIGH FLUID RESISTANCE FOR INTERIOR |
| UNI EN ISO 20566 : 2013 | PAINTS AND VARNISHES - DETERMINATION OF THE SCRATCH RESISTANCE OF A COATING SYSTEM USING A LABORATORY-SCALE CAR-WASH |
| PREN 2436-3 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 03: HIGH CORROSION AND FLUID RESISTANCE |
| PREN 2436-1 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED-FREE TWO COMPONENT COLD CURING PRIMER - PART 01: BASIC REQUIREMENTS |
| PREN 2434-2 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 02: HIGH CHEMICAL RESISTANCE |
| BS EN ISO 4623-1:2002 | Paints and varnishes. Determination of resistance to filiform corrosion Steel substrates |
| PREN 4170 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR MEASUREMENT OF RESISTANCE TO COLD CRACK TEMPERATURE CYCLE |
| UNE-EN ISO 12137:2012 | Paints and varnishes - Determination of mar resistance (ISO 12137:2011) |
| UNI EN 4159 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO MICROBIAL GROWTH |
| ISO 19396-1:2017 | Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane |
| I.S. EN 4160:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
| I.S. EN 4171:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - TEST METHOD FOR DETERMINATION OF PHOSPHORIC ACID INDEX |
| I.S. EN ISO 12137:2011 | PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE (ISO 12137:2011) |
| I.S. EN ISO 2812-5:2007 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| BIS IS 1448-21 : 2012 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 21: DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| I.S. EN ISO 16927:2014 | PAINTS AND VARNISHES - DETERMINATION OF THE OVERCOATABILITY AND RECOATABILITY OF A COATING (ISO 16927:2014) |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| EN ISO 7783:2011 | Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) |
| ISO 16474-1:2013 | Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
| ISO/TR 9038:1991 | Paints and varnishes Determination of the ability of liquid paints to sustain combustion |
| UNI EN ISO 12137 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF MAR RESISTANCE |
| EN ISO 4623-1:2002 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000) |
| BS EN ISO 12944-7:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Execution and supervision of paint work |
| UNE-EN ISO 16925:2014 | Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting (ISO 16925:2014) |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ASTM D 3925 : 2002 : R2015 | Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| ISO 3233-1:2013 | Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle |
| EN ISO 2812-4:2017 | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods (ISO 2812-4:2017) |
| ONORM EN ISO 3233-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014) |
| I.S. EN ISO 7783:2011 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 7783:2011) |
| I.S. EN ISO 2812-1:2017 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 1: IMMERSION IN LIQUIDS OTHER THAN WATER (ISO 2812-1:2017) |
| I.S. EN ISO 28199-1:2009 | PAINTS AND VARNISHES - EVALUATION OF PROPERTIES OF COATING SYSTEMS RELATED TO THE APPLICATION PROCESS - PART 1: RELEVANT VOCABULARY AND PREPARATION OF TEST PANELS |
| ONORM EN 927-3 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 3: NATURAL WEATHERING TEST |
| DIN EN ISO 6504-3:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE |
| DIN EN ISO 6504-1:2006-04 | PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 1: KUBELKA-MUNK METHOD FOR WHITE AND LIGHT-COLOURED PAINTS |
| DIN EN 1062-3:2008-04 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR MASONRY AND CONCRETE - PART 3: DETERMINATION OF LIQUID WATER PERMEABILITY |
| BS EN 13578:2003 | Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete |
| BS EN ISO 6272-1:2011 | Paints and varnishes. Rapid-deformation (impact resistance) tests Falling-weight test, large-area indenter |
| BS EN ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes. Sampling |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| BS EN 2435-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion and fluid resistance with surface preparation tolerance |
| ISO 1522:2006 | Paints and varnishes — Pendulum damping test |
| ISO 7253:1996 | Paints and varnishes — Determination of resistance to neutral salt spray (fog) |
| BS EN ISO 2815:2003 | Paints and varnishes. Buchholz indentation test |
| BS EN ISO 2811-3:2011 | Paints and varnishes. Determination of density Oscillation method |
| BS EN 4406:2006 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant |
| ISO 14680-1:2000 | Paints and varnishes Determination of pigment content Part 1: Centrifuge method |
| BS EN 2436-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer High corrosion resistance |
| BS EN ISO 1524:2013 | Paints, varnishes and printing inks. Determination of fineness of grind |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| BS EN 24624:1993 | Paints and varnishes. Pull-off test |
| BS EN ISO 11998:2006 | Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| BS EN ISO 7783-2:1999 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete Determination and classification of water-vapour transmission rate (permeability) |
| BS EN ISO 4623-2:2004 | Paints and varnishes. Determination of resistance to filiform corrosion Aluminium substrates |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| BS EN ISO 14680-2:2006 | Paints and varnishes. Determination of pigment content Ashing method |
| EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| DIN EN ISO 15091:2013-04 | PAINTS AND VARNISHES - DETERMINATION OF ELECTRICAL CONDUCTIVITY AND RESISTANCE (ISO 15091:2012) |
| EN 1062-3:2008 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability |
| EN 1062-6:2002 | Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability |
| DIN EN ISO 3680:2004-07 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| DIN EN ISO 9227:2017-07 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN 13062:2003 | Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement |
| DIN EN ISO 9514:2005-07 | PAINTS AND VARNISHES - DETERMINATION OF THE POT LIFE OF MULTICOMPONENT COATING SYSTEMS - PREPARATION AND CONDITIONING OF SAMPLES AND GUIDELINES FOR TESTING |
| DIN EN ISO 4624:2016-08 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| EN 13578:2003 | Products and systems for the protection and repair of concrete structure - Test Method - Compatibility on wet concrete |
| DIN EN ISO 1518-1:2011-09 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 1: CONSTANT-LOADING METHOD (ISO 1518-1:2011) |
| DIN EN ISO 15711:2005-03 | Paints and varnishes - Determination of resistance to cathodic disbonding of coatings exposed to sea water (ISO 15711:2003) |
| DIN EN ISO 15710:2006-09 | Paints and varnishes - Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution (ISO 15710:2002) |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| DIN EN ISO 15184:2013-02 | PAINTS AND VARNISHES - DETERMINATION OF FILM HARDNESS BY PENCIL TEST (ISO 15184:2012) |
| BS 3900-E10(2003) : 2003 | PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION |
| BS 3900-F8(1993) : 1993 AMD 9930 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| BS 3900-F13(2002) : 2002 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES |
| BS 3900-C3(1990) : AMD 7501 | METHODS OF TEST FOR PAINTS - THROUGH DRY TEST |
| BS 3900-A6(1996) : 1996 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS |
| BS 3900-E4(2001) : 2001 | PAINTS AND VARNISHES - CUPPING TEST |
| BS 3900-E6(1992) : 1992 AMD 8353 | METHODS OF TEST FOR PAINTS - CROSS CUT TEST |
| ONORM EN ISO 11890-1 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| BS 3900-A1:1992 | Methods of test for paints. Sampling |
| BS 3900-E6(2007) : 2007 | PAINTS AND VARNISHES - CROSS-CUT TEST |
| ONORM EN ISO 2884-2 : 2006 | PAINTS AND VARNISHES - DETERMINATION OF VISCOSITY USING ROTARY VISCOMETERS - PART 2: DISC OR BALL VISCOMETER OPERATED AT A SPECIFIED SPEED |
| BS 3900-C7(1993) : 1993 AMD 8357 | METHODS OF TEST FOR PAINTS - DETERMINATION OF THE POT-LIFE OF LIQUID SYSTEMS - PRESSURE TEST FOR STACKABILITY |
| I.S. EN ISO 2884-1:2006 | PAINTS AND VARNISHES - DETERMINATION OF VISCOSITY USING ROTARY VISCOMETERS - PART 1: CONE-AND-PLATE VISCOMETER OPERATED AT A HIGH RATE OF SHEAR |
| ONORM EN ISO 2811-3 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF DENSITY - PART 3: OSCILLATION METHOD |
| BS 3900-E2(1992) : 1992 AMD 12091 | METHODS OF TEST FOR PAINTS - SCRATCH TEST |
| BS 3900-E1(2002) : 2002 | PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
| BS 3900-E1(1995) : 1995 | METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL) |
| BS 3900-G5(1993) : 1993 AMD 8355 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO LIQUIDS - GENERAL METHODS |
| BS 3900-C2(1994) : 1994 AMD 8609 | METHODS OF TEST FOR PAINTS - SURFACE-DRYING TEST (BALLOTINI METHOD) |
| BS 3900-E4(1995) : 1995 | METHODS OF TEST FOR PAINTS - MECHANICAL TESTS ON PAINT FILMS - PAINTS AND VARNISHES - CUPPING TEST |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.