ISO 15085:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Small craft — Man-overboard prevention and recovery
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
02-07-2024
13-03-2003
ISO 15085:2003 specifies the design as well as the construction and strength requirements for safety devices and arrangements intended to minimize the risk of falling overboard, and requirements to facilitate reboarding.
It describes means which can be used individually or combined to achieve these objectives, and applies to small craft of up to 24 m length of hull.
ISO 15085:2003 is not applicable to the following boat types:
- aquatic toys;
- canoes, kayaks, or other boats with a beam less than 1,1 m;
- personal watercraft, covered by ISO 13590;
- inflatable boats with a hull length of less than 8 m, covered by ISO 6185.
Committee |
ISO/TC 188
|
DevelopmentNote |
DRAFT ISO/DIS 15085 has been withdrawn by the publisher. (07/2015)
|
DocumentType |
Standard
|
Pages |
21
|
PublisherName |
International Organization for Standardization
|
Status |
Superseded
|
SupersededBy | |
UnderRevision |
Standards | Relationship |
UNE-EN ISO 15085:2003 | Identical |
I.S. EN ISO 15085:2003 | Identical |
SN EN ISO 15085 : 2003 | Identical |
UNI EN ISO 15085 : 2009 | Identical |
DIN EN ISO 15085:2009-10 | Identical |
UNI EN ISO 15085 : 2018 | Identical |
NBN EN ISO 15085 : 2003 AMD 1 2009 | Identical |
PN EN ISO 15085 : 2005 | Identical |
EN ISO 15085:2003 | Identical |
NS EN ISO 15085 : 2003 AMD 1 2009 | Identical |
BS EN ISO 15085:2003 | Identical |
PN EN ISO 15085 : 2005 AMD 1 2012 | Identical |
SS-EN ISO 15085 : 2003 | Identical |
NF EN ISO 15085 : 2003 AMD 1 2009 | Identical |
NF EN ISO 15085 : 2003 | Identical |
SN EN ISO 15085 : 2003 AMD 1 2009 | Identical |
NEN EN ISO 15085 : 2003 en | Identical |
ONORM EN ISO 15085 : 2009 | Identical |
JIS F 1021:2012 | Identical |
DS EN ISO 15085 : 2003 | Identical |
DS EN ISO 15085 : 2003 AMD 1 2009 | Identical |
I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
DIN EN ISO 10240:2015-09 | SMALL CRAFT - OWNER'S MANUAL (ISO 10240:2004 + AMD 1:2015) |
NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
BS EN ISO 12217-3:2017 | Small craft. Stability and buoyancy assessment and categorization Boats of hull length less than 6 m |
I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
ISO 12217-1:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
BS EN ISO 10240 : 2004 | SMALL CRAFT - OWNER'S MANUAL |
UNE-EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
DIN EN ISO 12217-1:2016-08 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
ISO 10240:2004 | Small craft Owner's manual |
I.S. EN ISO 10240:2004 | SMALL CRAFT - OWNER'S MANUAL (ISO 10240:2004) |
ONORM EN ISO 10240 : 2015 | SMALL CRAFT - OWNER'S MANUAL (ISO 10240:2004 + AMD.1:2015) |
EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
I.S. EN ISO 12217-3:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 3: BOATS OF HULL LENGTH LESS THAN 6 M (ISO 12217-3:2015) |
ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
UNE-EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
I.S. EN ISO 12217-1:2017 | SMALL CRAFT - STABILITY AND BUOYANCY ASSESSMENT AND CATEGORIZATION - PART 1: NON-SAILING BOATS OF HULL LENGTH GREATER THAN OR EQUAL TO 6 M (ISO 12217-1:2015) |
2003/44/EC : 2003 COR 1 2006 | DIRECTIVE 2003/44/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 2003 AMENDING DIRECTIVE 94/25/EC ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
EN ISO 8666:2016 | Small craft - Principal data (ISO 8666:2016) |
ISO 6185:1982 | Shipbuilding and marine structures Inflatable boats Boats made of reinforced elastomers or plastomers |
EN ISO 12217-3:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015) |
ISO 12217-3:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m |
EN ISO 12217-2:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) |
EN ISO 12217-1:2017 | Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) |
ISO 12217-2:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m |
1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
ISO 8666:2016 | Small craft Principal data |
ISO 12217-1:2015 | Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m |
ISO 13590:2003 | Small craft Personal watercraft Construction and system installation requirements |
ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
ISO 12216:2002 | Small craft Windows, portlights, hatches, deadlights and doors Strength and watertightness requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.