ISO 14122-2:2016
Current
The latest, up-to-date edition.
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
27-05-2016
ISO 14122-2:2016 gives requirements for non-powered working platforms and walkways which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access.
NOTE 1 "Fixed" means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools.
ISO 14122-2:2016 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine.
NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard.
It is intended that this part of ISO 14122 be used with ISO 14122‑1 to give the requirements for walking platforms and walkways.
The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels.
ISO 14122-2:2016 is not applicable to machinery manufactured before the date of its publication.
Committee |
ISO/TC 199
|
DevelopmentNote |
Supersedes ISO/DIS 14122-2. (05/2016)
|
DocumentType |
Standard
|
Pages |
13
|
ProductNote |
THIS STANDARD ALSO REFERS TO
EN 353-1,EN 364 |
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SAC GB/T 17888.2:2020 | Identical |
ABNT NBR ISO 14122-2:2023 | Identical |
DIN EN ISO 14122-2:2016-10 | Identical |
NBN EN ISO 14122-2 : 2016 | Identical |
NEN EN ISO 14122-2 : 2016 | Identical |
NS EN ISO 14122-2 : 2016 | Identical |
I.S. EN ISO 14122-2:2016 | Identical |
PN EN ISO 14122-2 : 2016 | Identical |
SN EN ISO 14122-2:2016 | Identical |
UNI EN ISO 14122-2 : 2010 | Identical |
SS-EN ISO 14122-2:2016 | Identical |
UNI EN ISO 14122-2:2016 | Identical |
IS 16809 : Part 2 : 2018 | Identical |
UNE-EN ISO 14122-2:2017 | Identical |
BS EN ISO 14122-2:2016 | Identical |
EN ISO 14122-2:2016 | Identical |
NF EN ISO 14122-2 : 2017 | Identical |
GOST R ISO 14122-2 : 2010 | Identical |
DIN EN 16252:2013-03 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
ISO 13578:2017 | Industrial furnaces and associated processing equipment — Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
BS EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles |
DIN EN 15162:2008-10 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
I.S. EN ISO 12100-2:2003 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
DIN EN ISO 16093:2014-03 (Draft) | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
03/306044 DC : DRAFT APR 2003 | BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
PREN 378-3 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
12/30258755 DC : 0 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
12/30243081 DC : 0 | BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
I.S. EN 15774:2010 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
12/30273148 DC : 0 | BS EN 15467 - FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
18/30345301 DC : DRAFT APR 2018 | BS ISO 21539 - SHIPS AND MARINE TECHNOLOGY - TESTING SPECIFICATION FOR WALKWAY USING ELECTRICAL RESISTANCE TRACE HEATING |
11/30231451 DC : DRAFT SEP 2011 | BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
03/306594 DC : DRAFT APR 2003 | BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE |
13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
10/30211242 DC : 0 | BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
03/313810 DC : 0 | EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
BS EN 16252:2012 | Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements |
ONORM EN 15746-2 : 2013 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
BS EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory |
BS EN 15467:2014 | Food processing machinery. Fish heading and filleting machines. Safety and hygiene requirements |
12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
09/30180290 DC : 0 | BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
PREN 474-1 : DRAFT 2017 | EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
12/30243084 DC : 0 | BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
BS EN 14753:2007 | Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel |
08/30173506 DC : DRAFT JAN 2008 | BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
DIN EN 15467:2015-03 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
DIN EN 15774:2011-10 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
DIN EN 16486:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
I.S. EN 16500:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
I.S. EN 1034-26:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
BS ISO 13577-1:2016 | Industrial furnaces and associated processing equipment. Safety General requirements |
UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 1034-17:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
UNE-EN ISO 13856-1:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
I.S. EN 1501-3:2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
UNE-EN 16500:2015 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
UNI EN 1034-27 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
UNI EN 1034-21 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
EN 378-3:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
DIN EN 12409:2011-12 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
DIN EN 13379:2016-06 (Draft) | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
DIN EN 415-7:2009-12 | Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008) |
DIN EN 415-5:2010-04 | Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009) |
DIN EN 1034-3:2012-02 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
DIN EN 13378:2016-05 (Draft) | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
DIN EN 13355:2010-06 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
DIN EN 1756-2:2009-12 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers (includes Amendment A1:2009) |
BS EN ISO 14122-4:2016 | Safety of machinery. Permanent means of access to machinery Fixed ladders |
BS EN 13457 : 2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
17/30356606 DC : 0 | BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS |
BS EN 13042-3 : 2007 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES |
BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
BS EN 12601:2010 | Reciprocating internal combustion engine driven generating sets. Safety |
15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
UNE-EN ISO 14122-4:2017 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
BS EN 12629-7 : 2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
BS EN 528:2008 | Rail dependent storage and retrieval equipment. Safety requirements |
BS EN 12409 : 2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
BS EN 13378 : 2001 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
BS EN 1034-1 : 2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS |
14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
BS EN 15067:2007 | Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements |
BS EN 415-6:2013 | Safety of packaging machines Pallet wrapping machines |
DIN EN 12601:2011-07 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
I.S. EN 14010:2004 | |
EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
I.S. EN 13289:2001 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
DIN EN 15067:2008-03 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
EN 1114-1:2011 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
EN 1034-17:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
EN 12012-4:2006+A1:2008 | Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
EN 13102:2005+A1:2008 | Ceramic machines - Safety - Loading and unloading of fine clay tiles |
EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory |
DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
EN 13379:2001+A1:2013 | Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements |
EN 1034-5:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
EN 16191:2014 | Tunnelling machinery - Safety requirements |
EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
EN 1034-6:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
EN 12601:2010 | Reciprocating internal combustion engine driven generating sets - Safety |
EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
EN 1034-21:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines |
EN 13378:2001+A1:2013 | Pasta processing plants - Pasta presses - Safety and hygiene requirements |
EN 12409:2008+A1:2011 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
DIN EN ISO 12100-2:2004-04 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
EN 13355:2004+A1:2009 | Coating plants - Combined booths - Safety requirements |
EN 13289:2001+A1:2013 | Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
EN 13457:2004+A1:2010 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
EN 13042-3:2007+A1:2009 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines |
UNI EN 1034-1 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
EN 1034-2:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
EN 1034-26:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines |
ONORM EN 1915-1 : 2013 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
DIN EN 1501-3:2010-06 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
DIN EN ISO 13856-1:2013-08 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
I.S. EN ISO 11111-6:2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 11111-6:2005) |
UNE-EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
11/30243078 DC : 0 | BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
I.S. EN ISO 16090-1:2018 | MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017) |
UNI EN 16500 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
BS EN 15774:2010 | Food processing machinery. Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi). Safety and hygiene requirements |
03/306578 DC : DRAFT APR 2003 | EN 14658 - CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
PREN 1672-1 : DRAFT 2012 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
14/30274816 DC : 0 | BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
14/30285733 DC : 0 | BS EN ISO 16092-1 - MACHINE TOOLS SAFETY - PRESSES - PART 1: GENERAL SAFETY REQUIREMENTS |
BS EN 1034-16:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines |
08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
BS EN 16500:2014 | Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements |
12/30259421 DC : 0 | BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
UNI EN 16191 : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
12/30255086 DC : 0 | BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
03/306593 DC : DRAFT APR 2003 | BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
DIN EN 15164:2008-09 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
UNI EN 1034-26 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
PREN 12012-1 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
12/30270038 DC : 0 | BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
BS EN 16486:2014 | Machines for compacting waste materials or recyclable fractions. Compactors. Safety requirements |
UNI EN ISO 28881 : 2013 | MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES |
UNI EN 12012-4 : 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
I.S. EN 16486:2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
05/19981971 DC : 0 | BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
UNI EN 16252 : 2013 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
UNI EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
PREN 1539 : DRAFT 2012 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
I.S. EN 15164:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
I.S. EN 15163:2017 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS |
BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
PREN 17206 : DRAFT 2018 | ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
PREN 12601 : DRAFT 2010 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
EN 12042 : 2014 COR 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 13035-1:2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY |
DIN EN 12042:2014-07 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
EN ISO 16090-1:2018 | Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017) |
UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
UNI EN 12042 : 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
UNI EN 15774 : 2011 | FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS |
PREN 289 : DRAFT 2012 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN ISO 13856-1 : 2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS |
EN 12013:2018 | Plastics and rubber machines - Internal mixers - Safety requirements |
I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
DIN EN 1012-1:2011-02 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
DIN EN 1756-1:2008-10 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods (includes Amendment A1:2008) |
DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
DIN EN 13102:2009-05 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
DIN EN 869:2009-12 | Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009) |
DIN EN 536:2016-01 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
DIN EN ISO 8528-13:2014-09 (Draft) | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15) |
DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
DIN EN 13042-3:2010-05 | Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009) |
DIN EN 12044:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009) |
UNE-EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
UNE-EN 1034-3:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
BS EN 13355 : 2004 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
BS EN ISO 11111-1:2016 | Textile machinery. Safety requirements Common requirements |
BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
BS EN 13379 : 2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
ISO 19859:2016 | Gas turbine applications Requirements for power generation |
BS EN 1034-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
BS EN 12629-6 : 2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
06/30154990 DC : 0 | BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
I.S. EN 619:2002 | |
I.S. EN 1034-2:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
I.S. EN 869:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
I.S. EN 289:2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
I.S. EN 1012-1:2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
I.S. EN 415-6:2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
I.S. EN 12629-6:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
I.S. EN 13379:2001 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
I.S. EN 1846-2:2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
I.S. EN 422:2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
ONORM EN 12042 : JUN 2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN ISO 14122-4:2016 | SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS (ISO 14122-4:2016) |
I.S. EN 13378:2001 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 1034-4:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
I.S. EN 1034-6:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
I.S. EN 14658:2005 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
I.S. EN 1915-1:2013 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
I.S. EN 12409:2008 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 13102:2006 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
I.S. EN 12044:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 13732:2013 | FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
I.S. EN 12629-1:2000 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
I.S. EN 12111:2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
I.S. EN 1114-1:2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
I.S. EN ISO 11111-1:2016 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016) |
DIN EN 1760-1:1997-09 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
DIN EN 1034-1:2010-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) |
I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
DIN EN 1034-7:2010-06 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (includes Amendment A1:2009) |
I.S. EN 1034-5:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
I.S. EN 13355:2005 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
I.S. EN 378-3:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
I.S. EN 1034-1:2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
DIN EN 1539:2016-02 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
I.S. EN 1539:2015 | DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS |
I.S. EN 617:2001 | |
I.S. EN 201:2009 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
I.S. EN 13042-3:2007 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES |
DIN EN 13289:2013-05 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN ISO 2867:2011 | EARTH-MOVING MACHINERY - ACCESS SYSTEMS |
I.S. EN 415-5:2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
DIN EN 1034-5:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009) |
I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
I.S. EN 1247:2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
I.S. EN 741:2000 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
DIN EN 13378:2013-05 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
DIN EN 13379:2013-05 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
DIN EN 1034-4:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009) |
I.S. EN 1756-1:2002 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
DIN EN 1034-6:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009) |
DIN EN 1845:2008-06 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
I.S. EN 1845:2007 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
I.S. EN ISO 14122-3:2016 | SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS (ISO 14122-3:2016) |
I.S. EN ISO 14122-1:2016 | SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS (ISO 14122-1:2016) |
I.S. EN 536:2015 | ROAD CONSTRUCTION MACHINES - MIXING PLANTS FOR ROAD CONSTRUCTION MATERIALS - SAFETY REQUIREMENTS |
I.S. EN 13457:2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
I.S. EN 1756-2:2004 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS |
I.S. EN 12629-7:2004 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
DIN EN 1034-2:2010-09 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009) |
I.S. EN 415-7:2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
I.S. EN 1034-3:2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
ONORM EN 16486 : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
I.S. EN 528:2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
DIN EN ISO 16093:2017-10 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
UNI EN 14658 : 2010 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
ONORM EN ISO 28881 : 2013 | MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013) |
VDI 2381 Blatt 1:2009-07 | Final inspection of stationary and track-bound cranes - Instructionals form for experts |
ONORM EN 13732 : 2013 | FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
UNI EN 415-8 : 2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
17/30364335 DC : 0 | BS EN 1009-3 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: SPECIFIC REQUIREMENTS FOR CRUSHING AND MILLING MACHINERY |
BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
08/30187804 DC : DRAFT AUG 2008 | BS EN ISO 2867 - EARTH-MOVING MACHINERY - ACCESS SYSTEMS |
16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
15/30296744 DC : 0 | BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
BS EN 15162:2008 | Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws |
BS EN ISO 28881:2013 | Machine tools. Safety. Electro-discharge machines |
ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
09/30175678 DC : 0 | BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
14/30272245 DC : 0 | BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS |
09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
BS EN 1034-17:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines |
BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
BS EN 15164:2008 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines |
BS EN 13035-2:2008 | Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory |
UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
17/30317170 DC : 0 | BS EN ISO 20430 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
13/30263800 DC : 0 | BS ISO 15845 - AIRCRAFT GROUND EQUIPMENT - BOARDING VEHICLE FOR PERSONS WITH REDUCED MOBILITY - FUNCTIONAL AND SAFETY REQUIREMENTS |
UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
BS EN 415-8:2008 | Safety of packaging machines Strapping machines |
09/30182302 DC : 0 | BS EN 1034-1:2000/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
BS ISO 15845:2014 | Aircraft ground equipment. Boarding vehicle for persons with reduced mobility. Functional and safety requirements |
ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
BS EN 1034-21:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines |
10/30214958 DC : 0 | BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
DIN EN 16191:2014-09 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
UNE-EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
11/30197556 DC : 0 | BS ISO 7134 - EARTH-MOVING MACHINERY - GRADERS - TERMINOLOGY AND COMMERCIAL SPECIFICATIONS |
UNI EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
05/19981967 DC : 0 | BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS |
BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
BS EN 16191:2014 | Tunnelling machinery. Safety requirements |
BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
ISO 16090-1:2017 | Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements |
08/30183861 DC : DRAFT SEP 2008 | BS EN 13732 - FOOD PROCESSING MACHINERY - BULK MILK COOLERS ON FARM - REQUIREMENTS FOR PERFORMANCE, SAFETY AND HYGIENE |
PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
DIN EN 16474:2015-08 | PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
EN 16252:2012 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
DIN EN 14753:2008-03 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
I.S. EN 14753:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL |
ONORM EN 1501-3 : 2010 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
I.S. EN 16774:2016 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
I.S. EN 1034-21:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
UNE-EN ISO 23125:2015 | Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
I.S. EN 12013:2018 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
UNI EN 1034-16 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
DIN EN 12629-6:2011-02 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products (includes Amendment A1:2010) |
I.S. EN 15162:2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
ISO/TR 17529:2014 | Machine tools Practical guidance and example of risk assessment on electro-discharge machines |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
DIN EN 1247:2010-12 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010) |
DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
DIN EN 692:2009-10 | Machine tools - Mechanical presses - Safety (includes Amendment A1:2009) |
DIN EN 422:2009-10 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
DIN EN 12629-1:2011-01 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010) |
DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
DIN EN 741:2011-06 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials (includes Amendment A1:2010) |
DIN EN 14658:2010-06 | Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining (includes Amendment A1:2010) |
DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
I.S.EN ISO 8528-13:2016&LC:2016 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014) |
UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
BS EN 12629-1 : 2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
BS EN 13102 : 2005 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
BS EN 1034-3:2011 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Rereelers and winders |
BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
BS EN 741 : 2000 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
UNE-EN 378-3:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
ISO 8528-13:2016 | Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety |
EN ISO 8528-13:2016 | Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) |
UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 16486:2014 | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
EN ISO 16093:2017 | Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
EN 12629-7:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
UNI EN 12921-1 : 2010 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
UNI EN 1012-1 : 2010 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS |
UNI EN 13379 : 2013 | PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS |
UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
ONORM EN 1034-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
UNI EN 12629-6 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 6: STATIONARY AND MOBILE EQUIPMENT FOR THE MANUFACTURE OF PRECAST REINFORCED PRODUCTS |
UNI EN 1846-2 : 2013 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
UNI EN 619 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS |
UNI EN 692 : 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
EN 617:2001+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
UNI EN 1114-1 : 2011 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
UNI EN ISO 12100-2 : 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
UNI EN 617 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS |
UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
UNI EN 1845 : 2008 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN 415-6 : 2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
UNI EN 13457 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
UNI EN 1034-4 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
UNI EN 15067 : 2008 | PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS |
UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
UNI EN 13378 : 2013 | PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS |
UNI EN 12757-1 : 2010 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
ONORM EN 619 : 2011 | |
ONORM EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
UNI EN 12629-1 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
UNI EN ISO 2867 : 2011 | EARTH-MOVING MACHINERY - ACCESS SYSTEMS |
UNI EN 13042-3 : 2010 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES |
UNI EN 201 : 2010 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN 12601 : 2011 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
UNI EN 1915-1 : 2014 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
UNI EN 1756-2 : 2009 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS |
UNI EN 1034-6 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
UNI EN 415-5 : 2010 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
UNI EN 13898 : 2009 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
EN 1034-27:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
UNI EN 12409 : 2011 | PLASTICS AND RUBBER MACHINES - THERMOFORMING MACHINES - SAFETY REQUIREMENTS |
UNI EN 1247 : 2010 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
UNI EN 12629-7 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 7: STATIONARY AND MOBILE EQUIPMENT FOR LONG LINE MANUFACTURE OF PRESTRESSED PRODUCTS |
UNI EN 869 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
UNI EN 12044 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
UNI EN 1034-2 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
UNI EN 12111 : 2014 | TUNNELLING MACHINES - ROAD HEADERS AND CONTINUOUS MINERS - SAFETY REQUIREMENTS |
UNI EN 13289 : 2013 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
UNI EN 1760-1 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
UNI EN 1034-5 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
UNI EN 13355 : 2009 | COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS |
BS EN 1247 : 2004 | FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES |
UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
UNI EN 13102 : 2009 | CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES |
UNI EN 422 : 2009 | PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN 415-7 : 2008 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
UNI EN 741 : 2011 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS FOR PNEUMATIC HANDLING OF BULK MATERIALS |
UNI EN 1034-3 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
UNI EN ISO 11161 : 2010 | SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS |
UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
UNI EN 289 : 2014 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
UNI EN 15164 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES |
DIN EN 1034-16:2012-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
DIN EN 16191 E : 2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
04/30124330 DC : 0 | EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS |
I.S. EN 12601:2010 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY |
PREN 12013 : DRAFT 2015 | PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS |
ABS 0154 : 2016 COR 2018 | GUIDE FOR MEANS OF ACCESS TO TANKS AND HOLDS FOR INSPECTION |
UNI EN 15162 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS |
14/30302903 DC : 0 | BS EN 16774 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STEEL CONVERTER AND ASSOCIATED EQUIPMENT |
UNI EN 1034-17 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
I.S. EN 692:2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
11/30227089 DC : 0 | BS EN 1034-3 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
18/30366946 DC : 0 | BS EN 17206 - ENTERTAINMENT TECHNOLOGY - LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - SPECIFICATIONS FOR GENERAL REQUIREMENTS (EXCLUDING ALUMINUM AND STEEL TRUSSES AND TOWERS) |
09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
CSA Z432 : 2016 | SAFEGUARDING OF MACHINERY |
10/30233949 DC : 0 | BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS |
08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
04/30123607 DC : DRAFT OCT 2004 | EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
07/30172338 DC : DRAFT DEC 2007 | BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS |
14/30263884 DC : 0 | BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
BS EN 16474:2015 | Plastics and rubber machines. Tyre curing machines. Safety requirements |
BS EN 415-10:2014 | Safety of packaging machines General Requirements |
UNI EN 1501-3 : 2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
BS EN ISO 16093:2017 | Machine tools. Safety. Sawing machines for cold metal |
09/30201664 DC : 0 | BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION |
14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
05/19981975 DC : DRAFT JUN 2005 | BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
DIN EN 13035-2:2008-10 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY |
12/30255089 DC : 0 | BS EN 16474 - PLASTICS AND RUBBER MACHINES - TYRE CURING PRESSES - SAFETY REQUIREMENTS |
12/30268301 DC : 0 | BS EN 16486 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS |
14/30290999 DC : 0 | BS EN ISO 14122-1 - SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS OF ACCESS BETWEEN TWO LEVELS |
14/30304361 DC : 0 | BS EN ISO 11111-1 - TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS |
PREN 15180 : DRAFT 2011 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
PREN 1034-3 : DRAFT 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 3: REREELERS AND WINDERS |
I.S. EN 13035-2:2008 | MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY |
DIN EN 1034-17:2012-11 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
DIN EN 16500:2014-10 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
BS EN ISO 23125:2015 | Machine tools. Safety. Turning machines |
BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
BS EN 1034-27:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems |
BS EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws |
BS EN 12042:2014 | Food processing machinery. Automatic dough dividers. Safety and hygiene requirements |
I.S. EN 1034-16:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
DIN EN 16500 E : 2014 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS |
ISO 13577-1:2016 | Industrial furnaces and associated processing equipment Safety Part 1: General requirements |
DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
DIN EN 1034-26:2012-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
BS EN 16774:2016 | Safety of machinery. Safety requirements for steel converter and associated equipment |
UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
I.S. EN 1034-27:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
I.S. EN ISO 28881:2013 | MACHINE TOOLS - SAFETY - ELECTRO-DISCHARGE MACHINES (ISO 28881:2013) |
ISO 16089:2015 | Machine tools Safety Stationary grinding machines |
PREN 15467 : DRAFT 2012 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN ISO 16093:2017 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL (ISO 16093:2017) |
I.S. EN 15467:2014 | FOOD PROCESSING MACHINERY - FISH HEADING AND FILLETING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 16191:2014 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
I.S. EN ISO 8528-13:2016 | RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014) |
I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
BS EN 12013:2018 | Plastics and rubber machines. Internal mixers. Safety requirements |
EN 15163:2017 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
17/30364338 DC : 0 | BS EN 1009-1 - MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 1: COMMON REQUIREMENTS FOR PARTLY COMPLETED MACHINERY AND PROCESSING PLANTS |
GOST EN 1760-1 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
EN 1756-1:2001+A1:2008 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
UNE-EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
DIN EN ISO 2867:2011-11 | Earth-moving machinery - Access systems (ISO 2867:2011); German version EN ISO 2867:2011 |
DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
DIN EN 13732:2013-10 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
DIN EN 528:2009-02 | Rail dependent storage and retrieval equipment - Safety requirements |
DIN EN 201:2010-02 | PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS |
DIN EN 617:2011-06 | Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (includes Amendment A1:2010) |
DIN EN 1114-1:2012-01 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
DIN EN 12629-7:2011-03 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (includes Amendment A1:2010) |
BS EN 415-5 : 2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
14/30297343 DC : 0 | BS EN ISO 8528-13 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY |
UNE-EN ISO 8528-13:2017 | Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) |
ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
BS EN ISO 11161 : 2007 | SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS |
BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
UNE-EN ISO 14122-1:2017 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
BS EN ISO 2867:2011 | Earth-moving machinery. Access systems |
BS EN ISO 14122-3:2016 | Safety of machinery. Permanent means of access to machinery Stairs, stepladders and guard-rails |
UNE-EN 12601:2011 | Reciprocating internal combustion engine driven generating sets - Safety |
BS EN 869 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
BS EN 1756-2 : 2004 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS |
14/30238347 DC : 0 | BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
BS EN 619 : 2002 | |
BS EN ISO 11111-6 : 2005 | TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 11111-6:2005) |
BS EN 1034-4 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES |
BS EN 13289 : 2001 | PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS |
UNE-EN 741:2000 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
BS EN 1034-6 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
BS EN 201:2009 | Plastics and rubber machines. Injection moulding machines. Safety requirements |
UNE-EN 1539:2010 | Dryers and ovens, in which flammable substances are released - Safety requirements |
BS EN ISO 8528-13:2016 | Reciprocating internal combustion engine driven alternating current generating sets Safety |
UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
BS EN 1034-2 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS |
BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
UNE-EN 415-6:2014 | Safety of packaging machines - Part 6: Pallet wrapping machines |
BS EN 1756-1 : 2001 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
BS EN 415-7 : 2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
ISO 2867:2011 | Earth-moving machinery Access systems |
ISO 23125:2015 | Machine tools — Safety — Turning machines |
ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
UNE-EN 1846-2:2011 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
BS EN 422:2009 | Plastics and rubber machines. Blow moulding machines. Safety requirements |
BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
ISO 11111-1:2016 | Textile machinery Safety requirements Part 1: Common requirements |
BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
BS EN 14010 : 2003 | |
UNE-EN 619:2003 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads. |
ISO 16093:2017 | Machine tools — Safety — Sawing machines for cold metal |
UNE-EN 617:2002 | Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers. |
BS EN 12044 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
UNE-EN 12409:2009 | Plastics and rubber machines - Thermoforming machines - Safety requirements |
UNE-EN 1247:2005 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines |
UNE-EN 1756-2:2005 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers |
BS EN 378-3:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection |
BS EN 1846-2 : 2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
BS EN 536:2015 | Road construction machines. Mixing plants for road construction materials. Safety requirements |
BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
ISO 11111-6:2005 | Textile machinery Safety requirements Part 6: Fabric manufacturing machinery |
ISO 11161:2007 | Safety of machinery — Integrated manufacturing systems — Basic requirements |
BS EN 1760-1 : 1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
UNE-EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
UNE-EN ISO 14122-3:2017 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
BS EN 1539:2015 | Dryers and ovens, in which flammable substances are released. Safety requirements |
UNE-EN ISO 2867:2012 | Earth-moving machinery - Access systems (ISO 2867:2011) |
UNE-EN 1114-1:2012 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
EN 741:2000+A1:2010 | Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
EN 16774:2016 | Safety of machinery - Safety requirements for steel converter and associated equipment |
EN 15467:2014 | Food processing machinery - Fish heading and filleting machines - Safety and hygiene requirements |
EN 536:2015 | Road construction machines - Mixing plants for road construction materials - Safety requirements |
EN 692:2005+A1:2009 | Machine tools - Mechanical presses - Safety |
EN ISO 13856-1:2013 | Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
EN 15774:2010 | Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
EN 201:2009 | Plastics and rubber machines - Injection moulding machines - Safety requirements |
EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
EN 15067:2007 | Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
EN ISO 11111-1:2016 | Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
EN 422:2009 | Plastics and rubber machines - Blow moulding machines - Safety requirements |
EN 415-7:2006+A1:2008 | Safety of packaging machines - Part 7: Group and secondary packaging machines |
EN 415-8:2008 | Safety of packaging machines - Part 8: Strapping machines |
EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
EN 15164:2008 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines |
EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
EN 619:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
EN 1539:2015 | Dryers and ovens, in which flammable substances are released - Safety requirements |
EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
EN 1756-2:2004+A1:2009 | Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers |
EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
EN 16500:2014 | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units |
EN 15162:2008 | Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws |
EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
ONORM EN 620 : 2011 | |
EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
EN 14753:2007 | Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
EN 13732:2013 | Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
EN 16474:2015 | Plastics and rubber machines - Tyre curing machines - Safety requirements |
EN 415-6:2013 | Safety of packaging machines - Part 6: Pallet wrapping machines |
EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
EN 289:2014 | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
EN 415-5:2006+A1:2009 | Safety of packaging machines - Part 5: Wrapping machines |
EN 1846-2:2009+A1:2013 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
EN 15906:2011 | Winter maintenance equipment - Snow removal machines with rotating tools - Specification and clearing capacity |
EN 14658:2005+A1:2010 | Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining |
EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
UNI EN 528 : 2009 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
I.S. EN 12012-4:2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
I.S. EN 16252:2012 | MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS |
NF EN 50308 : 2004 | WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE |
BS EN 15906:2011 | Winter maintenance equipment. Snow removal machines with rotating tools. Specification and clearing capacity |
UNE-EN 15163:2018 | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
DIN EN 1034-21:2012-11 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
11/30251974 DC : 0 | BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
I.S. EN 12042:2014 | FOOD PROCESSING MACHINERY - AUTOMATIC DOUGH DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS |
13/30263819 DC : 0 | BS ISO 6966-2 - AIRCRAFT GROUND EQUIPMENT - BASIC REQUIREMENTS - PART 2: SAFETY REQUIREMENTS |
13/30291777 DC : 0 | BS EN 378-3 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
BS EN 1034-26:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll packaging machines |
03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
12/30247814 DC : 0 | BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
BS ISO 6966-2:2014 | Aircraft ground equipment. Basic requirements Safety requirements |
03/306595 DC : 0 | BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
DIN EN 415-8:2011-06 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
I.S. EN 16474:2015 | PLASTICS AND RUBBER MACHINES - TYRE CURING MACHINES - SAFETY REQUIREMENTS |
BIS IS/ISO 12643-1 : 2009 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
DIN EN 1034-27:2012-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
BS EN ISO 13856-1:2013 | Safety of machinery. Pressure-sensitive protective devices General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
PD ISO/TR 17529:2014 | Machine tools. Practical guidance and example of risk assessment on electro-discharge machines |
05/19981969 DC : DRAFT JUN 2005 | BS EN 1034-5 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS |
UNE-EN 16252:2013 | Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
ISO 6966-2:2014 | Aircraft ground equipment — Basic requirements — Part 2: Safety requirements |
I.S. EN 415-8:2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
I.S. EN ISO 13856-1:2013 | SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013) |
BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
ISO/TS 22559-2:2010 | Safety requirements for lifts (elevators) Part 2: Safety parameters meeting the global essential safety requirements (GESRs) |
I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
DIN EN ISO 16089:2016-06 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
ISO 15845:2014 | Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements |
UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
15/30314036 DC : 0 | BS EN 12012-1 - PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS |
ANSI/ISO 12100-2 : 2007 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
I.S. EN ISO 23125:2015 | MACHINE TOOLS - SAFETY - TURNING MACHINES (ISO 23125:2015) |
DIN EN 619:2011-02 | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010) |
I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
DIN EN ISO 11161:2010-10 | Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007 + Amd 1:2010); German version EN ISO 11161:2007 + A1:2010 |
DIN EN 415-6:2013-09 | Safety of packaging machines - Part 6: Pallet wrapping machines |
DIN EN 12012-4:2010-01 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
DIN EN 13289:2015-12 (Draft) | Pasta processing plant - Dryers and coolers - Safety and hygiene requirements; German and English version prEN 13289:2015 |
DIN EN 13457:2010-10 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010 |
DIN EN 1760-1:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
DIN EN 289:2014-09 | PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS |
BS EN 12012-4 : 2006 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
BS EN 1845:2007 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
BS EN 692 : 2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
BS EN 13732:2013 | Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene |
DD ISO/TS 22559-2:2010 | Safety requirements for lifts (elevators) Safety parameters meeting the global essential safety requirements (GESRs) |
BS EN 1114-1:2011 | Plastics and rubber machines. Extruders and extrusion lines Safety requirements for extruders |
ISO 28881:2013 | Machine tools Safety Electro-discharge machines |
BS EN 1012-1:2010 | Compressors and vacuum pumps. Safety requirements Air compressors |
BS EN ISO 14122-1:2016 | Safety of machinery. Permanent means of access to machinery Choice of fixed means and general requirements of access |
BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
BS EN 1915-1:2013 | Aircraft ground support equipment. General requirements Basic safety requirements |
BS EN 617 : 2001 | |
BS EN 14658 : 2005 | CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING |
BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
DIN EN 1846-2:2013-05 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance (includes Amendment A1:2013) |
EN 1034-3:2011 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
EN 12629-6:2004+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
EN 1247:2004+A1:2010 | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
DIN EN 13035-1:2008-06 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
UNI EN 1756-1 : 2008 | TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS |
ONORM EN 12012-4 : 2010 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS |
EN 12629-1:2000+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
EN 1034-16:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines |
EN 1012-1:2010 | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
EN 1034-4:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
I.S. EN ISO 11161:2007 | SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS |
DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
EN 12111:2014 | Tunnelling machines - Road headers and continuous miners - Safety requirements |
EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
UNE-EN 1034-5:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
UNE-EN 1034-2:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
UNE-EN 12629-6:2005 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
ONORM EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
UNE-EN 12629-7:2005 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
UNE-EN 14658:2006 | Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining |
UNE-EN 415-5:2007 | Safety of packaging machines - Part 5: Wrapping machines |
UNE-EN 1034-6:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
UNE-EN 12044:2006 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
UNE-EN 12629-1:2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS |
UNE-EN 1034-4:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
AS 5327:2019 | Earth-moving machinery - Access systems (ISO 2867:2011, MOD) |
ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
BGR 181 : 2003 | FUSSBOEDEN IN ARBEITSRAEUMEN UND ARBEITSBEREICHEN MIT RUTSCHGEFAHR |
ISO 14120:2015 | Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
1995/16/EC : 1995 | DIRECTIVE 95/16/EC OF 29 JUNE 1995 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO LIFTS |
ISO 15534-3:2000 | Ergonomic design for the safety of machinery — Part 3: Anthropometric data |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
ISO 15534-1:2000 | Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
EN 795:2012 | Personal fall protection equipment - Anchor devices |
ISO 15534-2:2000 | Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
BS 4592-0(2006) : 2006 | FLOORING, STAIR TREADS AND HANDRAILS FOR INDUSTRIAL USE - PART 0: COMMON DESIGN REQUIREMENTS AND RECOMMENDATIONS FOR INSTALLATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.