ISO 14021:2016
Current
Current
The latest, up-to-date edition.
Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, Spanish, Castilian, French
Published date
14-03-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 14021:2016 specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. It further describes selected terms commonly used in environmental claims and gives qualifications for their use. This International Standard also describes a general evaluation and verification methodology for self-declared environmental claims and specific evaluation and verification methods for the selected claims in this International Standard.
ISO 14021:2016 does not preclude, override, or in any way change, legally required environmental information, claims or labelling, or any other applicable legal requirements.
| Committee |
ISO/TC 207/SC 3
|
| DevelopmentNote |
Supersedes ISO/DIS 14021. (03/2016)
|
| DocumentType |
Standard
|
| Pages |
27
|
| ProductNote |
THIS STANDARD ALSO REFERS TO PBI 27-1993,AS 4082-1992,OECD 301
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 14021:2021 | Identical |
| UNI EN ISO 14021 : 2012 | Identical |
| NS EN ISO 14021 : 2016 | Identical |
| UNE-EN ISO 14021:2017 | Identical |
| ÖNORM EN ISO 14021: 2016 09 01 | Identical |
| DIN EN ISO 14021:2016-07 | Identical |
| I.S. EN ISO 14021:2016 | Identical |
| NEN EN ISO 14021 : 2016 | Identical |
| CSA ISO 14021:20 | Identical |
| NBN EN ISO 14021 : 2016 | Identical |
| EN ISO 14021:2016 | Identical |
| ONORM EN ISO 14021 : 2012 | Identical |
| UNI EN ISO 14021:2016 | Identical |
| SN EN ISO 14021:2016 | Identical |
| SS-EN ISO 14021:2017 | Identical |
| NF EN ISO 14021 : 2016 | Identical |
| BS EN ISO 14021:2016 | Identical |
| SAC GB/T 24021 : 2001 | Identical |
| GOST R ISO 14021 : 2000 | Identical |
| CSA ISO 14021A : 2013(R2014) | Identical |
| CSA PLUS 14021 : 2008 | Identical |
| PN EN ISO 14021 : 2016 | Identical |
| BIS IS/ISO 14021 : 1999(R2017) | Identical |
| BS ISO 14021 : 1999 AMD 13493 | Identical |
| 15/30328778 DC : 0 | BS EN 13251 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
| UNE-ISO 14066:2012 | Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification teams. |
| I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| 08/30191997 DC : 0 | BS ISO 1043-1 - PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS |
| ISO 18601:2013 | Packaging and the environment — General requirements for the use of ISO standards in the field of packaging and the environment |
| 06/30147232 DC : DRAFT OCT 2006 | IEC 60601-1-10 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD - REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| ISO 18604:2013 | Packaging and the environment — Material recycling |
| 08/30180502 DC : DRAFT JUNE 2008 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| BS EN 16935:2017 | Bio-based products. Requirements for Business-to-Consumer communication and claims |
| 15/30328787 DC : 0 | BS EN 13265 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
| PREN 12493 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| 15/30328784 DC : 0 | BS EN 13257 - GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
| UNI CEN/TS 16524 : 2013 | MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT |
| UNI CEN/TS 16398 : 2013 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIOBASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| CEN ISO/TS 14027:2018 | Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017) |
| PD ISO/TS 12720:2014 | Sustainability in buildings and civil engineering works. Guidelines on the application of the general principles in ISO 15392 |
| PD CEN/TR 17004:2016 | Mechanical products. Conditions to set up environmental communication models by recognizing sectorial particularities |
| 09/30140724 DC : 0 | BS ISO 26000 - GUIDANCE ON SOCIAL RESPONSIBILITY |
| UNE-EN ISO 14004:2016 | Environmental management systems - General guidelines on implementation (ISO 14004:2016) |
| BS ISO 16745:2015 | Environmental performance of buildings. Carbon metric of a building. Use stage |
| I.S. CR 14311:2002 | PACKAGING - MARKING AND MATERIAL IDENTIFICATION SYSTEM |
| NF ISO 15270 : 2009 | PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
| PD CEN/TS 16822:2015 | Textiles and textile products. Self-declared environmental claims. Use of the terms |
| 12/30253289 DC : 0 | BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
| BS ISO 16745-1:2017 | Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage Calculation, reporting and communication |
| PD CEN/TS 16524:2013 | Mechanical products. Methodology for reduction of environmental impacts in product design and development |
| 15/30328781 DC : 0 | BS EN 13256 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
| 16/30333286 DC : 0 | BS ISO 14955-1 - MACHINE TOOLS - ENVIRONMENTAL EVALUATION OF MACHINE TOOLS - PART 1: DESIGN METHODOLOGY FOR ENERGY-EFFICIENT MACHINE TOOLS |
| 11/30240161 DC : 0 | BS ISO 18606 - PACKAGING AND THE ENVIRONMENT - ORGANIC RECYCLING |
| BS ISO 14955-1:2017 | Machine tools. Environmental evaluation of machine tools Design methodology for energy-efficient machine tools |
| BS EN ISO 14045:2012 | Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines |
| BS ISO 19709-1:2016 | Transport packaging. Small load container systems Common requirements and test methods |
| BS ISO 17422:2002 | Plastics. Environmental aspects. General guidelines for their inclusion in standards |
| 09/30186082 DC : 0 | BS EN 13110 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS - DESIGN AND CONSTRUCTION |
| DIN EN 16311:2013-05 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| BS EN ISO 14050:2010 | Environmental management. Vocabulary |
| CSA ISO 14025 : 2007 : R2012 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| 11/30247591 DC : DRAFT JULY 2011 | BS EN 16311 - ENGINEERING CONSULTANCY SERVICES - TERMINOLOGY AT A HIGH LEVEL TO DESCRIBE THE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| 12/30250279 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| CSA ISO 14040 : 2006 : R2016 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| ISO 16745-2:2017 | Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 2: Verification |
| 04/300394 DC : DRAFT JAN 2004 | IEC 61906 ED.1 - PROCEDURE FOR DECLARATION OF MATERIALS IN PRODUCTS OF THE ELECTROTECHNICAL AND ELECTRONICS INDUSTRY (DIN 19220 |
| ISO 14955-1:2017 | Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools |
| CSA ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| CSA ISO/IEC 13273-2 : 2015 | ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES |
| I.S. ISO 26000:2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| I.S. EN 14678-3:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
| CSA ISO TR 14062 : 2003 | ENVIRONMENTAL MANAGEMENT - INTEGRATING ENVIRONMENTAL ASPECTS INTO PRODUCT DESIGN AND DEVELOPMENT |
| ISO 19709-1:2016 | Transport packaging Small load container systems Part 1: Common requirements and test methods |
| I.S. EN 16935:2017 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS-TO-CONSUMER COMMUNICATION AND CLAIMS |
| PREN 14140 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 16575:2014 | BIO-BASED PRODUCTS - VOCABULARY |
| ISO 16620-5:2017 | Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content |
| S.R. CEN TR 15932:2010 | PLASTICS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIOPOLYMERS AND BIOPLASTICS |
| I.S. EN ISO 14025:2010 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| UNE-EN 16575:2015 | Bio-based products - Vocabulary |
| I.S. EN ISO 14044:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006) |
| NSF 355 : 2011 | GREENER CHEMICALS AND PROCESSES INFORMATION - GATE-TO-GATE INFORMATION ON CHEMICAL PRODUCTS AND THEIR MANUFACTURING PROCESSES |
| PREN 16848 : DRAFT 2015 | BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
| ISO/TR 14062:2002 | Environmental management Integrating environmental aspects into product design and development |
| EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
| BS EN ISO 14044 : 2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| UNE-EN 16119:2013 | LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing |
| UNI CEN/TR 15822 : 2010 | PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES |
| ISO 14006:2011 | Environmental management systems Guidelines for incorporating ecodesign |
| BS EN 14471 : 2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| BS EN 14912:2015 | LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders |
| BS EN ISO 14031:2013 | Environmental management. Environmental performance evaluation. Guidelines |
| DIN EN 14893:2014-09 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| BS EN 13253:2016 | Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments) |
| UNE-EN 13257:2017 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
| I.S. EN 14912:2015 | LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS |
| EN 13255:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
| CEN/TS 16295:2012 | Plastics - Declaration of the bio-based carbon content |
| EN 13265:2016 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
| CEN/TR 581-4:2005 | Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 4: Requirements and test methods for durability under the influence of climatic conditions |
| EN 13250:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways |
| CEN/TR 15822:2009 | Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues |
| CEN/TR 16227:2011 | Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants |
| CEN/TS 16765:2015 | LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards |
| EN ISO/IEC 13273-2:2016 | Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable energy sources (ISO/IEC 13273-2:2015) |
| EN 62542 : 2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013) |
| CEN Guide 4:2008 | GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| EN 13257:2016 | Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals |
| EN 13249:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
| CEN/TS 16398:2012 | Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet |
| EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| CEN ISO/TS 14067:2014 | Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013) |
| EN 13254:2016 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
| EN 13256:2016 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
| I.S. EN ISO 14020:2002 | ENVIRONMENTAL LABELS AND DECLARATIONS - GENERAL PRINCIPLES |
| ISO/IEC 29142-3:2013 | Information technology — Print cartridge characterization — Part 3: Environment |
| ISO 21930:2017 | Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services |
| DIN EN 16119:2013-05 | LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing |
| 02/103631 DC : DRAFT MAY 2002 | BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS |
| BS ISO 14066:2011 | Greenhouse gases. Competence requirements for greenhouse gas validation teams and verification teams |
| DIN ISO 26000:2011-01 | Guidance on social responsibility (ISO 26000:2010) |
| DIN EN 14678-3:2013-03 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
| UNI EN 15343 : 2008 | PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT |
| BS EN 16311:2013 | Engineering services. Terminology to describe engineering services for industrial products |
| UNI EN ISO 14050 : 2010 | ENVIRONMENTAL MANAGEMENT - VOCABULARY |
| UNE-EN 16935:2017 | Bio-based products - Requirements for Business-to-Consumer communication and claims |
| BS EN ISO 14063:2010 | Environmental management. Environmental communication. Guidelines and examples |
| 15/30323537 DC : 0 | BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| 13/30248693 DC : 0 | BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| PD ISO/TR 14062:2002 | Environmental management. Integrating environmental aspects into product design and development |
| 15/30328790 DC : 0 | BS EN 13249 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
| PD CEN/TS 16398:2012 | Plastics. Template for reporting and communication of biobased carbon content and recovery options of biopolymers and bioplastics. Data sheet |
| I.S. EN 60601-1-10:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| 14/30273496 DC : 0 | BS ISO 21067 - PACKAGING - VOCABULARY |
| 15/30328775 DC : 0 | BS EN 13250 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
| 13/30264086 DC : 0 | BS ISO 16745 - ENVIRONMENTAL PERFORMANCE OF BUILDINGS - CARBON METRIC OF A BUILDING - USE STAGE |
| NSF AWWA/ANSI 375 - 2016 | SUSTAINABILITY ASSESSMENT FOR WATER CONTACT PRODUCTS |
| 13/30286129 DC : 0 | BS EN 16652-1 - LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES |
| ISO 21931-1:2010 | Sustainability in building construction Framework for methods of assessment of the environmental performance of construction works Part 1: Buildings |
| BS ISO 16620-5:2017 | Plastics. Biobased content Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content |
| BS EN 14678-3:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises |
| BS ISO 16745-2:2017 | Sustainability in buildings and civil engineering works. Carbon metric of an existing building during use stage Verification |
| CSA ISO 26000 : 2016 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| DIN EN 16887:2015-07 (Draft) | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| UNI EN 16119 : 2013 | LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING |
| UNI EN ISO 14045 : 2012 | ENVIRONMENTAL MANAGEMENT - ECO-EFFICIENCY ASSESSMENT OF PRODUCT SYSTEMS - PRINCIPLES, REQUIREMENTS AND GUIDELINES |
| 11/30250549 DC : 0 | BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16652-1:2016 | LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES |
| NF EN ISO 14025 : 2010 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| CSA ISO 14044 : 2006 : R2011 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| CSA ISO 14025:2007 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| DIN EN 14893 E : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| DIN EN ISO/IEC 13273-2:2016-06 | ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES (ISO/IEC 13273-2:2015) |
| S.R. CEN/TS 16524:2013 | MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT |
| ISO 15686-4:2014 | Building Construction — Service Life Planning — Part 4: Service Life Planning using Building Information Modelling |
| I.S. EN 16125:2015 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| S.R. CEN TR 15822:2009 | PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES |
| I.S. EN ISO 472:2013 | PLASTICS - VOCABULARY (ISO 472:2013) |
| EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods |
| UNE-CEN/TR 15822:2011 IN | Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues |
| UNE-EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| I.S. EN ISO/IEC 13273-2:2016 | ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES (ISO/IEC 13273-2:2015) |
| S.R. CEN/TR 17004:2016 | MECHANICAL PRODUCTS - CONDITIONS TO SET UP ENVIRONMENTAL COMMUNICATION MODELS BY RECOGNIZING SECTORIAL PARTICULARITIES |
| EN 60601-1-10:2008/A1:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007) |
| I.S. EN 16887:2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| ISO 16745-1:2017 | Sustainability in buildings and civil engineering works — Carbon metric of an existing building during use stage — Part 1: Calculation, reporting and communication |
| S.R. CEN ISO/TS 14027:2018 | ENVIRONMENTAL LABELS AND DECLARATIONS - DEVELOPMENT OF PRODUCT CATEGORY RULES (ISO/TS 14027:2017) |
| I.S. EN 14071:2015 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| ISO/TR 14025:2000 | Environmental labels and declarations Type III environmental declarations |
| UNI CEN ISO/TS 14067 : 2014 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
| S.R. CEN/TS 16765:2015 | LPG EQUIPMENT AND ACCESSORIES - ENVIRONMENTAL CONSIDERATIONS FOR CEN/TC 286 STANDARDS |
| PREN 14471 : DRAFT 2011 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| PREN 13256 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
| UNI EN ISO 14006 : 2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| 18/30361790 DC : 0 | BS EN 17228 - PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION |
| ISO/IEC Guide 41:2003 | Packaging Recommendations for addressing consumer needs |
| UNE-EN 14071:2015 | LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment |
| I.S. ISO 14004:2005 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| CSA C22.2 No. 60601-1-10 : 2009 : R2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| ISO/TS 14027:2017 | Environmental labels and declarations — Development of product category rules |
| BS EN 14071:2015 | LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment |
| PREN 17228 : DRAFT 2018 | PLASTICS - BIO-BASED POLYMERS, PLASTICS, AND PLASTIC PRODUCTS - TERMINOLOGY, CHARACTERISTICS AND COMMUNICATION |
| NSF 426 : 2017 | ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| DIN EN 12252:2014-07 | LPG equipment and accessories - Equipping of LPG road tankers |
| DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| DIN EN 14570:2014-07 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS |
| DIN EN 14471:2015-03 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14912:2015-05 | LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders |
| UNE-EN 13253:2017 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
| UNE-EN 12542:2011 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| I.S. EN 12542:2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| I.S. EN 14471:2013 | CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS |
| ONORM EN 12542 : 2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| I.S. EN 14570:2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS |
| I.S. EN 13251:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
| DIN EN 12542:2010-12 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| I.S. EN 13249:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
| I.S. EN 13256:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS -CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES |
| I.S. EN 14129:2014 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
| I.S. EN ISO 14031:2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES (ISO 14031:2013) |
| I.S. EN 13255:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN 13265:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
| I.S. EN 13252:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
| I.S. EN 14140:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 13250:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
| DIN EN 13110:2017-05 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN 12252:2000-10 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| I.S. EN 13257:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
| I.S. EN 13253:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
| I.S. EN 14893:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| I.S. EN 12252:2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| I.S. EN 13776:2013 | LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS |
| I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 13254:2016 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| DIN EN 12493:2017-01 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNI EN 12493 : 2014 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNI EN ISO 472 : 2013 | PLASTICS - VOCABULARY |
| ISO/TS 12720:2014 | Sustainability in buildings and civil engineering works — Guidelines on the application of the general principles in ISO 15392 |
| DIN EN ISO 14004:2016-08 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON IMPLEMENTATION (ISO 14004:2016) |
| CSA ISO 14031 : 2014 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
| TR 103 476 : 1.1.2 | ENVIRONMENTAL ENGINEERING (EE); CIRCULAR ECONOMY (CE) IN INFORMATION AND COMMUNICATION TECHNOLOGY (ICT); DEFINITION OF APPROACHES, CONCEPTS AND METRICS |
| BS EN 12493 : 2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| ISO 472:2013 | Plastics — Vocabulary |
| CAN/CSA-ISO 14004:16 | Environmental management systems — General guidelines on implementation |
| DIN EN 16935:2015-12 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS-TO-CONSUMER COMMUNICATION AND CLAIMS |
| PD CEN/TR 15932:2010 | Plastics. Recommendation for terminology and characterisation of biopolymers and bioplastics |
| 16/30302061 DC : 0 | BS 6349-5 - MARITIME WORKS - PART 5: CODE OF PRACTICE FOR DREDGING AND RECLAMATION |
| BS ISO 21067-1:2016 | Packaging. Vocabulary General terms |
| 05/30103388 DC : DRAFT APR 2005 | ISO 14040 - ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| BS ISO 20400:2017 | Sustainable procurement. Guidance |
| CEI EN 50604-1 : 1ED 2017 | SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| 17/30333280 DC : 0 | BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| BS EN ISO 14006:2011 | Environmental management systems. Guidelines for incorporating ecodesign |
| 07/30161754 DC : 0 | BS ISO 15270 - PLASTICS - GUIDELINES FOR THE RECOVERY AND RECYCLING OF PLASTICS WASTE |
| 13/30266592 DC : 0 | BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| BS EN 16575:2014 | Bio-based products. Vocabulary |
| 08/30192173 DC : 0 | BS EN 62542 ED1 - ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - STANDARDIZATION OF ENVIRONMENTAL ASPECTS - GLOSSARY OF TERMS |
| ISO 14066:2011 | Greenhouse gases — Competence requirements for greenhouse gas validation teams and verification teams |
| DIN EN 16575 E : 2014 | BIO-BASED PRODUCTS - VOCABULARY |
| BS EN 16887:2017 | Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints |
| 12/30244912 DC : 0 | BS ISO 14067 - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
| BS EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods |
| UNE-EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| 14/30231508 DC : 0 | BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY |
| 12/30248681 DC : 0 | BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| BS PD ISO/TS 14067 : 2013 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
| BS EN ISO 14025:2010 | Environmental labels and declarations. Type III environmental declarations. Principles and procedures |
| PD CEN/TS 16765:2015 | LPG equipment and accessories. Environmental considerations for CEN/TC 286 standards |
| BS EN 60601-1-9 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN |
| BS ISO/IEC 29142-3:2013 | Information technology. Print cartridge characterization Environment |
| PD CEN ISO/TS 14067:2014 | Greenhouse gases. Carbon footprint of products. Requirements and guidelines for quantification and communication |
| BS EN 16652-1:2016 | LPG equipment and accessories. Automotive LPG vehicles workshops Working areas and procedures |
| CSA ISO 14040 : 2006 : R2011 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| PD ISO/TR 15686-11:2014 | Buildings and constructed assets. Service life planning Terminology |
| PREN 13252 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
| PREN 13250 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS |
| BS ISO 21930:2007 | Sustainability in building construction. Environmental declaration of building products |
| UNI ISO/TS 14067 : 2013 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION |
| BS EN 60601-1-10 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| IWA 9:2011 | Framework for managing sustainable development in business districts |
| UNE-ISO 20400:2017 | Sustainable procurement. Guidance |
| UNE-EN 16652-1:2016 | LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures |
| CSA ISO TR 14025 : 2001 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS |
| CSA ISO 14044 : 2006 : R2016 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| ISO 13315-1:2012 | Environmental management for concrete and concrete structures — Part 1: General principles |
| DIN EN 16652-1:2016-09 | LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES |
| PREN 13257 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS |
| PREN 13253 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
| UNI CEN/TR 15932 : 2010 | PLASTICS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIOPOLYMERS AND BIOPLASTICS |
| UNI EN 16311 : 2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| UNI EN 16575 : 2014 | BIO-BASED PRODUCTS - VOCABULARY |
| I.S. EN 13110:2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| I.S. EN ISO 14004:2016 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON IMPLEMENTATION (ISO 14004:2016) |
| UNI CEN/TR 16227 : 2011 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| UNI EN 14678-3 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
| IEC PAS 62545:2008 | Environmental information on Electrical and Electronic Equipment (EIEEE) |
| CR 14311:2002 | Packaging - Marking and material identification system |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| CSA C22.2 No. 60601-1-10:2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| ISO/TR 15686-11:2014 | Buildings and constructed assets — Service life planning — Part 11: Terminology |
| ISO 21067-1:2016 | Packaging Vocabulary Part 1: General terms |
| ISO/IEC Guide 76:2008 | Development of service standards Recommendations for addressing consumer issues |
| DIN EN 13110:2012-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| DIN EN 13776:2013-08 | LPG equipment and accessories - Filling and discharge procedures for LPG road tankers |
| DIN EN 14140:2015-03 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN 15343:2008-02 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| BS EN 14570:2014 | LPG equipment and accessories. Equipping of overground and underground LPG vessels |
| BS EN 13249:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
| BS EN 12252:2014 | LPG equipment and accessories. Equipping of LPG road tankers |
| UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| CEN/TS 16524:2013 | Mechanical products - Methodology for reduction of environmental impacts in product design and development |
| UNI EN 12542 : 2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE |
| I.S. EN ISO 14040:2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - PRINCIPLES AND FRAMEWORK |
| EN ISO 14050:2010 | Environmental management - Vocabulary (ISO 14050:2009) |
| EN ISO 14040:2006 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006) |
| EN 60601-1-9:2008/A1:2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007/A1:2013) |
| EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| UNE-EN 16125:2016 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 16311:2013 | Engineering services - Terminology to describe engineering services for industrial products |
| EN 16652-1:2016 | LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| UNI EN 14570 : 2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS |
| UNI EN 13776 : 2013 | LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS |
| UNI EN 14893 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| EN ISO 14020:2001 | Environmental labels and declarations - General principles (ISO 14020:2000) |
| UNI EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNI EN 14129 : 2014 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
| UNI EN 14140 : 2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| UNI EN 12252 : 2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| ISO 18606:2013 | Packaging and the environment — Organic recycling |
| CSA C22.2 No. 60601-1-9 : 2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN |
| 12/30241112 DC : DRAFT JAN 2012 | BS EN ISO 14031 - ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
| BS ISO 10987:2012 | Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting |
| 05/30084682 DC : DRAFT MAR 2005 | BS ISO 21930 - SUSTAINABILITY IN BUILDING CONSTRUCTION - ENVIRONMENTAL DECLARATION OF BUILDING PRODUCTS |
| I.S. EN 16119:2013 | LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING |
| 13/30277471 DC : 0 | BS EN 14912 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS |
| BS ISO 14026 : 2017 | ENVIRONMENTAL LABELS AND DECLARATIONS - PRINCIPLES, REQUIREMENTS AND GUIDELINES FOR COMMUNICATION OF FOOTPRINT INFORMATION |
| PD IEC/TR 62474-1:2015 | Material declaration for products of and for the electrotechnical industry Guidance for the implementation of IEC 62474 |
| PD CR 14311:2002 | Packaging. Marking and material identification system |
| 11/30242519 DC : DRAFT JAN 2011 | BS ISO/IEC 29142-3 - CARTRIDGE CHARACTERIZATION STANDARD - PART 3: ENVIRONMENT |
| UNE-ISO 21930:2010 | Sustainability in building construction. Environmental declaration of building products |
| 11/30230642 DC : 0 | BS ISO 18604 - PACKAGING AND THE ENVIRONMENT - MATERIAL RECYCLING |
| UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
| 13/30269796 DC : 0 | BS ISO/IEC 13273-2 - ENERGY EFFICIENCY AND RENEWABLE ENERGY SOURCES - COMMON INTERNATIONAL TERMINOLOGY - PART 2: RENEWABLE ENERGY SOURCES |
| 12/30266928 DC : 0 | BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| 11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 50598-3:2015 | ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS |
| UNE-ISO 26000:2012 | Guidance on social responsibility |
| DIN EN 16887 E : 2017 | LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS |
| 13/30278421 DC : 0 | BS ISO 15686-4 - BUILDING CONSTRUCTION - SERVICE LIFE PLANNING - PART 4: SERVICE LIFE PLANNING USING BUILDING INFORMATION MODELLING |
| 13/30281067 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| PD ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works. A review of terminology |
| 15/30283967 DC : 0 | BS ISO 21067-2 - PACKAGING - VOCABULARY - PART 2: PACKAGING AND THE ENVIRONMENT TERMS |
| 15/30328796 DC : 0 | BS EN 13253 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS) |
| 17/30341961 DC : 0 | BS EN ISO 14067 - GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION |
| 16/30313957 DC : 0 | BS ISO 19709-1 - TRANSPORT PACKAGING - SMALL LOAD CONTAINER SYSTEMS - PART 1: COMMON REQUIREMENTS AND TEST METHODS |
| 13/30276940 DC : 0 | BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| DIN EN ISO 14063:2010-10 | Environmental management - Environmental communication - Guidelines and examples (ISO 14063:2006); German version EN ISO 14063:2010 |
| 15/30330831 DC : 0 | BS EN 16935 - BIO-BASED PRODUCTS - B2C REPORTING AND COMMUNICATION - REQUIREMENTS FOR CLAIMS |
| I.S. EN 62542:2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013 (EQV)) |
| S.R. CEN ISO/TS 14067:2014 | GREENHOUSE GASES - CARBON FOOTPRINT OF PRODUCTS - REQUIREMENTS AND GUIDELINES FOR QUANTIFICATION AND COMMUNICATION (ISO/TS 14067:2013) |
| BS ISO 21067-2:2015 | Packaging. Vocabulary Packaging and the environment terms |
| CAN/CSA-ISO 14066:12 (R2017) | Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams (Adopted ISO 14066:2011, first edition, 2011-04-15) |
| BS ISO 14063 : 2006 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL COMMUNICATION - GUIDELINES AND EXAMPLES |
| 08/30143668 DC : DRAFT DEC 2008 | BS EN ISO 14005 - ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR THE PHASED IMPLEMENTATION OF AN ENVIRONMENTAL MANAGEMENT SYSTEM, INCLUDING THE USE OF ENVIRONMENTAL PERFORMANCE EVALUATION |
| DD IEC/PAS 62545:2008 | Environmental information on electrical and electronic equipment (EIEEE) |
| DIN EN 16125:2016-03 | LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
| ISO Guide 64:2008 | Guide for addressing environmental issues in product standards |
| PREN 13249 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION) |
| CSA ISO 14044 :2006 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES |
| ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
| NSF 342 : 2014 | SUSTAINABILITY ASSESSMENT FOR WALLCOVERING PRODUCTS |
| PREN 13265 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS |
| I.S. EN 16311:2013 | ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS |
| BS ISO 26000:2010 | Guidance on social responsibility |
| ISO 21067-2:2015 | Packaging Vocabulary Part 2: Packaging and the environment terms |
| BS EN 16125:2015 | LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase |
| ECMA 370 : 5ED 2015 | TED - THE ECO DECLARATION |
| NSF 347 : 2012 | SUSTAINABILITY ASSESSMENT FOR SINGLE PLY ROOFING MEMBRANES |
| NSF 332 : 2015 | SUSTAINABILITY ASSESSMENT FOR RESILIENT FLOOR COVERINGS |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| DIN EN 12493:2014-03 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| PREN 14893 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES |
| UNI EN ISO 14031 : 2013 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL PERFORMANCE EVALUATION - GUIDELINES |
| UNE-EN ISO 472:2015 | Plastics - Vocabulary (ISO 472:2013) |
| I.S. CEN TR 581-4:2006 | OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS |
| I.S. EN ISO 14006:2011 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GUIDELINES FOR INCORPORATING ECODESIGN |
| I.S. EN 60601-1-9:2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-9: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR ENVIRONMENTALLY CONSCIOUS DESIGN (IEC 60601-1-9:2007 (EQV)) |
| IEC TR 62474-1:2015 | Material declaration for products of and for the electrotechnical industry - Part 1: Guidance for the implementation of IEC 62474 |
| UNE-EN ISO 1043-1:2012 | Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011) |
| DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
| DIN EN ISO 14040:2009-11 | Environmental management - Life cycle assessment - Principles and framework (ISO 14040:2006); German and English version EN ISO 14040:2006 |
| DIN EN 14129:2014-05 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS |
| UNE-EN 14140:2015 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| BS EN 14129:2014 | LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels |
| IEC 62542:2013 | Environmental standardization for electrical and electronic products and systems - Glossary of terms |
| BS EN 12542:2010 | LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup>. Design and manufacture |
| ISO 26000:2010 | Guidance on social responsibility |
| BS EN 13255:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals |
| ISO 14045:2012 | Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines |
| BS EN 14140:2014 | LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction |
| BS EN ISO 14040:2006 | Environmental management. Life cycle assessment. Principles and framework |
| BS EN 13252:2016 | Geotextiles and geotextile-related products. Characteristics required for use in drainage systems |
| BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| UNI EN ISO 14063 : 2010 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL COMMUNICATION - GUIDELINES AND EXAMPLES |
| EN ISO 14063:2010 | Environmental management - Environmental communication - Guidelines and examples (ISO 14063:2006) |
| UNE-EN 13252:2017 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
| ISO 14063:2006 | Environmental management Environmental communication Guidelines and examples |
| BS EN 13257:2016 | Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals |
| UNE-EN 13254:2017 | Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams |
| UNE-EN 13255:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals |
| BS EN 13265:2016 | Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects |
| UNE-EN 13265:2017 | Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects |
| UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| BS EN 13256:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures |
| ISO 14004:2016 | Environmental management systems General guidelines on implementation |
| IEC 60601-1-9:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-9: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design |
| BS EN ISO 14020:2001 | Environmental labels and declarations. General principles |
| UNE-EN 13110:2012 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| IEC 60601-1-10:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers |
| BS EN 13254:2016 | Geotextiles and geotextile-related products. Characteristics required for the use in the construction of reservoirs and dams |
| UNE-EN 13776:2013 | LPG equipment and accessories - Filling and discharge procedures for LPG road tankers |
| UNE-EN 13256:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
| UNE-EN 14912:2015 | LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders |
| UNE-EN 13250:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways |
| ISO 14020:2000 | Environmental labels and declarations — General principles |
| UNE-EN 13251:2017 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
| UNE-EN 13110:2012+A1:2017 | LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction |
| ISO/TS 14067:2013 | Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication |
| ISO 14031:2013 | Environmental management Environmental performance evaluation Guidelines |
| UNE-EN ISO 14031:2015 | Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
| ISO 14050:2009 | Environmental management Vocabulary |
| EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| EN 16887:2017 | Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| EN 14471:2013+A1:2015 | Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
| EN 14912:2015 | LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders |
| ONORM EN 16119 : 2013 | LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING |
| EN 16125:2015 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| EN 16935:2017 | Bio-based products - Requirements for Business-to-Consumer communication and claims |
| EN 13253:2016 | Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) |
| EN ISO 14045:2012 | Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines (ISO 14045:2012) |
| EN 14129:2014 | LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels |
| EN 16575:2014 | Bio-based products - Vocabulary |
| EN ISO 14004:2016 | Environmental management systems - General guidelines on implementation (ISO 14004:2016) |
| EN 14570:2014 | LPG equipment and accessories - Equipping of overground and underground LPG vessels |
| EN 14678-3:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises |
| EN ISO 14025:2010 | Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
| EN 13776:2013 | LPG equipment and accessories - Filling and discharge procedures for LPG road tankers |
| I.S. EN ISO 14063:2010 | ENVIRONMENTAL MANAGEMENT - ENVIRONMENTAL COMMUNICATION - GUIDELINES AND EXAMPLES |
| BS ISO 15392:2008 | Sustainability in building construction. General principles |
| EN ISO 14031:2013 | Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2013) |
| PREN 12252 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| BS EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| UNE-EN 14893:2014 | LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| PREN 14912 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS |
| BS ISO 14025 : 2006 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| 16/30321496 DC : 0 | BS ISO 16620-5 - PLASTICS - BIOBASED CONTENT - PART 5: DECLARATION OF BIOBASED CARBON CONTENT, BIOBASED SYNTHETIC POLYMER CONTENT AND BIOBASED MASS CONTENT |
| NSF 457 : 2017 | SUSTAINABILITY LEADERSHIP STANDARD FOR PHOTOVOLTAIC MODULES |
| BS EN 16119:2013 | LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing |
| DIN EN 16575:2014-10 | BIO-BASED PRODUCTS - VOCABULARY |
| BS EN 62542:2013 | Environmental standardization for electrical and electronic products and systems. Glossary of terms |
| BS PD ISO/TS 14027 : 2017 | ENVIRONMENTAL LABELS AND DECLARATIONS - DEVELOPMENT OF PRODUCT CATEGORY RULES |
| 16/30344980 DC : 0 | BS ISO 20400 - SUSTAINABLE PROCUREMENT - GUIDANCE |
| 07/30156704 DC : DRAFT DEC 2007 | BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| I.S. EN ISO 14050:2010 | ENVIRONMENTAL MANAGEMENT - VOCABULARY |
| BS EN ISO/IEC 13273-2:2016 | Energy efficiency and renewable energy sources. Common international terminology Renewable energy sources |
| 15/30328769 DC : 0 | BS EN 13252 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS |
| BS ISO 15686-4:2014 | Building Construction. Service Life Planning Service Life Planning using Building Information Modelling |
| S.R. CEN/TS 16295:2012 | PLASTICS - DECLARATION OF THE BIO-BASED CARBON CONTENT |
| UNE-EN ISO/IEC 13273-2:2016 | Energy efficiency and renewable energy sources - Common international terminology - Part 2: Renewable energy sources (ISO/IEC 13273-2:2015) |
| UNE-EN 14678-3:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises |
| CSA ISO 14066 : 2012 | GREENHOUSE GASES - COMPETENCE REQUIREMENTS FOR GREENHOUSE GAS VALIDATION TEAMS AND VERIFICATION TEAMS |
| PREN 13251 : DRAFT 2015 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES |
| BS EN ISO 14004:2016 | ENISO 14004 Environmental management systems - General guidelines on principles, systems and support techniques |
| BS ISO 21931-1:2010 | Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction works Buildings |
| 11/30240152 DC : 0 | BS ISO 18601 - PACKAGING AND THE ENVIRONMENT - GENERAL REQUIREMENTS FOR THE USE OF ISO STANDARDS IN THE FIELD OF PACKAGING AND THE ENVIRONMENT |
| PD CEN/TR 16227:2011 | Liquid petroleum products. Bio-lubricants. Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants |
| BS ISO 14050:2002 | Environmental management. Vocabulary |
| BS ISO 14004 : 2004 | ENVIRONMENTAL MANAGEMENT SYSTEMS - GENERAL GUIDELINES ON PRINCIPLES, SYSTEMS AND SUPPORTING TECHNIQUES |
| CEN/TR 17004:2016 | Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities |
| BS ISO 21067:2007 | Packaging. Vocabulary |
| I.S. EN ISO 1043-1:2011 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| CAN/CSA-ISO 14025-07 (R2017) | Environmental Labels and Declarations - Type III Environmental Declarations - Principles and Procedures (Adopted ISO 14025:2006, first edition, 2006-07-01) |
| S.R. CEN/TS 16398:2012 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| 15/30317877 DC : 0 | BS EN 16848 - BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
| CSA C22.2 No. 60601-1-10 : 2009 : INC : AMD 1 : 2014 : R201400 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS |
| ISO 21929-1:2011 | Sustainability in building construction — Sustainability indicators — Part 1: Framework for the development of indicators and a core set of indicators for buildings |
| I.S. EN ISO 14045:2012 | ENVIRONMENTAL MANAGEMENT - ECO-EFFICIENCY ASSESSMENT OF PRODUCT SYSTEMS - PRINCIPLES, REQUIREMENTS AND GUIDELINES (ISO 14045:2012) |
| IEEE 1680.2-2012 | IEEE Standard for Environmental Assessment of Imaging Equipment |
| UNE-EN 12493:2014 | LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
| UNI CEN/TS 16295 : 2012 | PLASTICS - DECLARATION OF THE BIO-BASED CARBON CONTENT |
| ISO 21067:2007 | Packaging Vocabulary |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| NSF 140 : 2015 | SUSTAINABILITY ASSESSMENT FOR CARPET |
| I.S. EN 12493:2013 | LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE |
| UNE-CEN/TR 15932:2010 IN | Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics |
| ISO 20400:2017 | Sustainable procurement — Guidance |
| 17/30353403 DC : 0 | BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS |
| UNE-CEN ISO/TS 14027:2018 | Environmental labels and declarations - Development of product category rules (ISO/TS 14027:2017) |
| UNI ISO 26000 : 2010 | GUIDANCE ON SOCIAL RESPONSIBILITY |
| DIN EN 14071:2015-08 | LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT |
| CSA PLUS 1109 : 2003 | ENVIRONMENTAL TERMINOLOGY FOR CANADIAN BUSINESS |
| UNI EN ISO 14025 : 2010 | ENVIRONMENTAL LABELS AND DECLARATIONS - TYPE 3 ENVIRONMENTAL DECLARATIONS - PRINCIPLES AND PROCEDURES |
| ISO 17422:2002 | Plastics Environmental aspects General guidelines for their inclusion in standards |
| DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| ISO 16745:2015 | Environmental performance of buildings Carbon metric of a building Use stage |
| DIN EN ISO 14044:2006-10 | ENVIRONMENTAL MANAGEMENT - LIFE CYCLE ASSESSMENT - REQUIREMENTS AND GUIDELINES (ISO 14044:2006) |
| ISO 10987:2012 | Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting |
| ISO/TR 21932:2013 | Sustainability in buildings and civil engineering works A review of terminology |
| S.R. CEN/TR 16227:2011 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| BS EN ISO 1043-1:2011 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011) |
| EN ISO 14006:2011 | Environmental management systems - Guidelines for incorporating ecodesign (ISO 14006:2011) |
| DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| BS EN ISO 472:2013 | Plastics. Vocabulary |
| ISO/IEC 13273-2:2015 | Energy efficiency and renewable energy sources Common international terminology Part 2: Renewable energy sources |
| BS EN 15343:2007 | Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content |
| BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
| BS EN 13250:2016 | Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways |
| BS EN 13251:2016 | Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures |
| BS EN 14893:2014 | LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| UNE-EN 13249:2017 | Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) |
| ISO 14005:2010 | Environmental management systems Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation |
| BS EN 13776:2013 | LPG equipment and accessories. Filling and discharge procedures for LPG road tankers |
| BS EN 13110 : 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION |
| EN 13252:2016 | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems |
| CEN/TR 15932:2010 | Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics |
| EN 12252:2014 | LPG equipment and accessories - Equipping of LPG road tankers |
| EN 16119:2013 | LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing |
| EN 13251:2016 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
| EN 50598-3:2015 | Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations |
| DIN EN 14140:2017-01 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN ISO 14020:2002-02 | Environmental labels and declarations - General principles (ISO 14020:2000); English version of DIN EN ISO 14020 |
| UNE-EN 16125:2020 | LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase |
| ISO 14853:2016 | Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system Method by measurement of biogas production |
| IEC 60661:1999+AMD1:2003+AMD2:2005 CSV | Methods for measuring the performance of electric household coffee makers |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 5512 : 1996 | Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002) |
| IEC 61121:2012 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| IEC 60350:1999+AMD1:2005+AMD2:2008 CSV | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
| ISO/TR 14049:2012 | Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis |
| ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
| ISO/TS 14067:2013 | Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication |
| AS ISO 14040:2019 | Environmental management - Life cycle assessment - Principles and framework |
| ASTM D 5208 : 2014 : REDLINE | Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| ISO 5151:2017 | Non-ducted air conditioners and heat pumps — Testing and rating for performance |
| ASTM D 5271 : 2002 | Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System (Withdrawn 2011) |
| ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
| ISO/IEC Guide 14:2003 | Purchase information on goods and services intended for consumers |
| DIN V 54900-3:1998-09 | TESTING OF THE COMPOSTABILITY OF PLASTICS - PART 3: TESTING UNDER PRACTICE-RELEVANT CONDITIONS AND TESTING OF QUALITY OF THE COMPOSTS |
| AS ISO 14044:2019 | Environmental management - Life cycle assessment - Requirements and guidelines |
| ASTM D 5525 : 1994 : REV A | Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002) |
| ISO 9408:1999 | Water quality — Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer |
| IEC 60379:1987 | Methods for measuring the performance of electric storage water-heaters for household purposes |
| ASTM D 5509 : 1996 | Standard Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002) |
| ASTM D 3826 : 1998 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
| IEC 60530:1975 | Methods for measuring the performance of electric kettles and jugs for household and similar use |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| ASTM D 5247 : 1992 | Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms (Withdrawn 2004) |
| ASTM D 5833 : 2012 | Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| ISO 8561:1995 | Household frost-free refrigerating appliances Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation Characteristics and test methods |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 7827:2010 | Water quality Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium Method by analysis of dissolved organic carbon (DOC) |
| ASTM D 5209 : 1992 | Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004) |
| ASTM D 5338 : 2015 : REDLINE | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures |
| ISO 14020:2000 | Environmental labels and declarations — General principles |
| ASTM D 5437 : 1993 | Practice for Weathering of Plastics Under Marine Floating Exposure (Withdrawn 1999) |
| ISO 13253:2017 | Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
| ASTM D 6003 : 1996 | Standard Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005) |
| ANSI/ISO/ASQ E14001:2004 | Quality Systems For Environmental Data And Technology Programs - Requirements With Guidance For Use |
| DIN V 54900-2:1998-09 | TESTING OF THE COMPOSTABILITY OF PLASTICS - PART 2: TESTING OF THE COMPLETE BIODEGRADABILITY OF PLASTICS IN LABORATORY TESTS |
| BS 7500:1995 | Specification for marking of recycled paper board |
| ASTM D 5834 : 1995 | Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004) |
| ISO 10707:1994 | Water quality Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds Method by analysis of biochemical oxygen demand (closed bottle test) |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| IEC 61429:1995 | Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 60675:1994+AMD1:1998 CSV | Household electric direct-acting room heaters - Methods for measuring performance |
| IEC 60531:1999 | Household electric thermal storage room heaters - Methods for measuring performance |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| IEC 60436:2015 | Electric dishwashers for household use - Methods for measuring the performance |
| ISO 14852:1999 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide |
| ISO 14851:1999 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by measuring the oxygen demand in a closed respirometer |
| AS 4082-1992 | Recycled paper - Glossary of terms |
| ISO 14855-1:2012 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method |
| IEC 60705:2010+AMD1:2014 CSV | Household microwave ovens - Methods for measuring performance |
| EN 45001 : 1989 | GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.