ISO 13766-1:2018
Current
The latest, up-to-date edition.
Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
09-04-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 13766-1:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as defined in ISO/TR 12603:2010:
- drilling and foundation equipment;
- equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement;
- road construction and maintenance machinery and equipment.
ISO 13766-1:2018 deals with general EMC requirements under typical electromagnetic environmental conditions. (ISO 13766‑2:2018 deals with EMC requirements specifically related to functional safety).
Electrical/electronic subassemblies (ESA) and separate ESA intended to be fitted to the machinery are also dealt with. The following electromagnetic disturbance phenomena are evaluated:
- broadband and narrowband electromagnetic interference;
- electromagnetic field immunity;
- electrostatic discharge;
- conducted transients.
The machinery can have DC or AC or a combination of both as the internal electrical power supply system.
ISO 13766-1:2018 is not applicable to machines that are designed to be supplied by an external mains network or to phenomena caused by military applications.
NOTE 1 Grid-connected machines are covered by IEC 61000.
NOTE 2 Hybrid machines are covered in UN ECE R10-Rev. 5.
| Committee |
ISO/TC 127/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 13766-1. Together with ISO 13766-2, it supersedes ISO 13766. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 13766-1:2019-04 | Identical |
| EN ISO 13766-1:2018 | Identical |
| SS-EN ISO 13766-1:2018 | Identical |
| AS ISO 13766.1:2020 | Identical |
| SN EN ISO 13766-1:2019 | Identical |
| NF EN ISO 13766-1:2018 | Identical |
| ÖNORM EN ISO 13766-1:2020 02 15 | Identical |
| JIS A 8316-1:2021 | Identical |
| BS EN ISO 13766-1:2018 | Identical |
| UNE-EN ISO 13766-1:2018 | Identical |
| CISPR 12:2007+AMD1:2009 CSV | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
| ISO 16750-2:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| ISO 11451-3:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| ISO 6165:2012 | Earth-moving machinery — Basic types — Identification and terms and definitions |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| ISO 21848:2005 | Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| 2014/53/EU : 2014 COR 1 2015 | DIRECTIVE 2014/53/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 APRIL 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF RADIO EQUIPMENT AND REPEALING DIRECTIVE 1999/5/EC TEXT WITH EEA RELEVANCE |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| ISO 11451-2:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources |
| ISO/TR 12603:2010 | Building construction machinery and equipment Classification |
| ISO 11451-4:2013 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) |
| ISO 11451-1:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.