ISO 13274:2013
Current
The latest, up-to-date edition.
Packaging — Transport packaging for dangerous goods — Plastics compatibility testing for packaging and IBCs
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-08-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 13274:2013 specifies the requirements and test methods for compatibility testing of plastics packagings/Intermediate Bulk Containers (IBCs) and composite packagings/IBCs with plastics inners containing liquids. The testing involves storage with the liquid to be transported. For polyethylene-based packaging, testing with a standard liquid as defined in The European Agreement concerning the International Carriage of Dangerous Goods by Road may be undertaken. Annex B describes small-scale laboratory tests that may be used to determine the assimilation of those products to be carried with the standard liquids.
Where there is any contradiction between ISO 13274:2013 and any applicable regulation, the regulation always takes precendence.
| DevelopmentNote |
Supersedes ISO/DIS 13274, ISO 16101 & ISO 23667. (08/2013)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 13274:2014 | Identical |
| NF EN ISO 13274 : 2013 | Identical |
| NBN EN ISO 13274 : 2013 COR 2014 | Identical |
| NEN EN ISO 13274 : 2013 C1 2014 | Identical |
| NS EN ISO 13274 : 2013 AC 2014 | Identical |
| I.S. EN ISO 13274:2013 | Identical |
| PN EN ISO 13274 : 2013 AC 2014 | Identical |
| SN EN ISO 13274 : 2013 CORR 2015 | Identical |
| UNI EN ISO 13274 : 2013 | Identical |
| BS EN ISO 13274:2013 | Identical |
| DIN EN ISO 13274:2014-06 | Identical |
| SN EN ISO 13274:2013 | Identical |
| EN ISO 13274:2013 | Identical |
| PREN 15507 : DRAFT 2016 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES |
| UNE-EN 15507:2018 | Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades |
| BS EN 15507:2017 | Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades |
| EN 15507:2017 | Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades |
| 16/30303428 DC : 0 | BS EN 15507 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES |
| I.S. EN 15507:2017 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - COMPARATIVE MATERIAL TESTING OF POLYETHYLENE GRADES |
| ISO 22088-1:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 1: General guidance |
| ISO 6770:1982 | Instant tea Determination of free-flow and compacted bulk densities |
| ISO 11542-2:1998 | Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 11403-3:2014 | Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties |
| ISO 1133-1:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
| ISO 22088-2:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 2: Constant tensile load method |
| ISO 1628-3:2010 | Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 3: Polyethylenes and polypropylenes |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 22088-3:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 3: Bent strip method |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 1872-2:2007 | Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 22088-4:2006 | Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 16495:2013 | Packaging Transport packaging for dangerous goods Test methods |
| ASTM D 1693 : 2015 : REDLINE | Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.