ISO 12647-3:2013
Current
The latest, up-to-date edition.
Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-12-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 12647-3:2013 specifies a number of process parameters and their values to be applied when producing colour separations and printing forms for newspaper single or four-colour printing. The parameters and values are chosen in consideration of the process, covering the process stages: "colour separation", "making of the printing formed", "OK print or proof" and "production printing".
ISO 12647-3:2013 is intended to enhance communication between printers, publishers and advertisers and to make print buyers aware of the expected printed result in advance, enabling them to plan accordingly. ISO 12647-3:2013 defines tolerances, allowing for objective quality evaluations and raising the competitiveness of newspapers compared to other media.
ISO 12647-3:2013 is applicable:
to coldset offset production printing on newsprint that use colour separation data;
by analogy to press printing from printing surfaces produced by direct imaging;
to line screens and non-periodic screens, parameters given can be applied by analogy.
| Committee |
ISO/TC 130
|
| DevelopmentNote |
Supersedes ISO/DIS 12647-3. (12/2013)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| AS ISO 12647.3:2023 | Identical |
| GOST R ISO 12647-3 : 2014 | Identical |
| UNE-ISO 12647-3:2015 | Identical |
| BS ISO 12647-3:2013 | Identical |
| NEN ISO 12647-3 : 2014 | Identical |
| UNE 54102-3:2000 | Identical |
| BIS IS 15963-3 : 2012 | Identical |
| DIN ISO 12647-3:2000-05 | Identical |
| 11/30236277 DC : 0 | BS ISO 15339-1 - GRAPHIC TECHNOLOGY - PRINTING FROM DIGITAL DATA ACROSS MULTIPLE TECHNOLOGIES - PART 1: PRINCIPLES AND CHARACTERIZED REFERENCE PRINTING CONDITIONS |
| BS ISO 2846-2:2007 | Graphic technology. Colour and transparency of printing ink sets for four-colour printing Coldset offset lithographic printing |
| UNE-ISO 2846-2:2017 | Graphic technology. Colour and transparency of printing ink sets for four colour printing. Part 2: Coldset offset lithographic printing. |
| 07/30174471 DC : 0 | BS ISO 13655 - GRAPHIC TECHNOLOGY - SPECTRAL MEASUREMENT AND COLORIMETRIC COMPUTATION FOR GRAPHIC ARTS IMAGES |
| PD ISO/PAS 15339-1:2015 | Graphic technology. Printing from digital data across multiple technologies Principles |
| BS ISO 13656:2000 | Graphic technology. Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs |
| ISO 2846-2:2007 | Graphic technology Colour and transparency of printing ink sets for four-colour printing Part 2: Coldset offset lithographic printing |
| ISO 13656:2000 | Graphic technology Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs |
| ISO 15397:2014 | Graphic technology — Communication of graphic paper properties |
| ISO 12647-1:2013 | Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods |
| ISO 8254-1:2009 | Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
| ISO 5631-1:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| ISO 2846-2:2007 | Graphic technology Colour and transparency of printing ink sets for four-colour printing Part 2: Coldset offset lithographic printing |
| ISO 5-4:2009 | Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density |
| ISO 11475:2017 | Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) |
| ISO 2470-2:2008 | Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness) |
| ISO/TS 10128:2009 | Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data |
| ISO 5-3:2009 | Photography and graphic technology Density measurements Part 3: Spectral conditions |
| ISO 13655:2017 | Graphic technology — Spectral measurement and colorimetric computation for graphic arts images |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ISO 12647-7:2016 | Graphic technology Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly from digital data |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.