ISO 11890-2:2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
25-06-2020
Superseded by
Language(s)
French, English, Russian
Published date
12-03-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11890-2:2013 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.
It specifies a method for the determination of the volatile organic compound (VOC) content of paints, varnishes and their raw materials. This part is preferred if the expected VOC content is greater than 0,1 % by mass and less than about 15 % by mass. When the VOC content is greater than about 15 % by mass, the less complicated method given in ISO 118901 may be used.
This method assumes that the volatile matter is either water or organic. However, other volatile inorganic compounds can be present and might need to be quantified by another suitable method and allowed for in the calculations.
| DevelopmentNote |
Supersedes ISO/DIS 11890-2. (03/2013)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 11890-2 : 2013 | Identical |
| NF EN ISO 11890-2 : 2013 | Identical |
| NBN EN ISO 11890-2 : 2013 | Identical |
| NEN EN ISO 11890-2 : 2013 | Identical |
| NS EN ISO 11890-2 : 2013 | Identical |
| I.S. EN ISO 11890-2:2013 | Identical |
| PN EN ISO 11890-2 : 2013 | Identical |
| SN EN ISO 11890-2 : 2013 | Identical |
| UNI EN ISO 11890-2 : 2013 | Identical |
| SS-EN ISO 11890-2:2013 | Identical |
| BS EN ISO 11890-2:2013 | Identical |
| UNE-EN ISO 11890-2:2013 | Identical |
| EN ISO 11890-2:2013 | Identical |
| DIN EN ISO 11890-2:2013-07 | Identical |
| BS 3900-A24(2000) : 2000 AMD 13286 | Identical |
| NEN ISO 11890-2 : 2000 | Identical |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| UNI EN 16402 : 2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| 08/30184633 DC : DRAFT SEP 2008 | BS EN 1871 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 17/30362165 DC : 0 | BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| BS EN ISO 17895:2005 | Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
| BS EN 4588:2007 | Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip |
| EN 12802:2011 | Road marking materials - Laboratory methods for identification |
| BS EN 16402:2013 | Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing |
| BS EN 16516:2017 | Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| I.S. EN 16516:2017 | CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| 08/30184630 DC : DRAFT SEP 2008 | BS EN 12802 - ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| DIN EN 12802:2011-12 | Road marking materials - Laboratory methods for identification |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method |
| I.S. EN 12802:2011 | ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| I.S. EN 14468-1:2015 | TABLE TENNIS - PART 1: TABLE TENNIS TABLES, FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 11890-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| VDI 3456:2009-12 | Emission control - Refinishing and finishing of vehicles |
| VDI 3455:2013-08 | Emission control - High-volume car body painting plants |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| BS 3900-A23(2000) : 2000 AMD 13285 | METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD |
| PREN 2436-06 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| EN 16402:2013 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| DIN EN 14468-1:2015-05 | Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods; German version EN 14468-1:2015 |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| ISO 17895:2005 | Paints and varnishes — Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
| EN 16516:2017 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| UNI EN 12802 : 2011 | ROAD MARKING MATERIALS - LABORATORY METHODS FOR IDENTIFICATION |
| I.S. EN 16402:2013 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 15/30322088 DC : 0 | BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| PREN 4588 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
| BS EN 14468-1:2015 | Table tennis Table tennis tables, functional and safety requirements, test methods |
| BS EN 12802:2011 | Road marking materials. Laboratory methods for identification |
| UNE-EN 14468-1:2015 | Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| UNE-EN 12802:2012 | Road marking materials - Laboratory methods for identification |
| EN 14468-1:2015 | Table tennis - Part 1: Table tennis tables, functional and safety requirements, test methods |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| EN ISO 17895:2005 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN 4588:2007 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| 12/30258159 DC : 0 | BS EN 16402 - PAINT AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| UNE-EN 16402:2014 | Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| DIN EN ISO 17895:2005-06 | Paints and varnishes - Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) (ISO 17895:2005) |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| DIN EN 16402:2014-02 | PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING |
| ONORM EN ISO 11890-1 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 11890-1:2007 | Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method |
| ISO 2811-2:2011 | Paints and varnishes Determination of density Part 2: Immersed body (plummet) method |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 2811-4:2011 | Paints and varnishes Determination of density Part 4: Pressure cup method |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.