ISO 11114-4:2017
Current
Current
The latest, up-to-date edition.
Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
30-03-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11114-4: 2017 specifies test methods and the evaluation of results from these tests in order to qualify steels suitable for use in the manufacture of gas cylinders (up to 3 000 l) for hydrogen and hydrogen bearing embrittling gases.
This document only applies to seamless steel gas cylinders.
The requirements of this document are not applicable if at least one of the following conditions for the intended gas service is fulfilled:
- the working pressure of the filled embrittling gas is less than 20 % of the test pressure of the cylinder;
- the partial pressure of the filled embrittling gas of a gas mixture is less than 5 MPa (50 bar) in the case of hydrogen and other embrittling gases, with the exception of hydrogen sulphide and methyl mercaptan; in such cases, the partial pressure shall not exceed 0,25 MPa (2,5 bar).
NOTE In such cases, it is possible to design the cylinder as for ordinary (non-embrittling) gases.
| DevelopmentNote |
Supersedes ISO/DIS 11114-4. (04/2017)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 11114-4:2017-09 | Identical |
| NF EN ISO 11114-4 : 2017 | Identical |
| NEN EN ISO 11114-4 : 2017 | Identical |
| NS EN ISO 11114-4 : 2017 | Identical |
| I.S. EN ISO 11114-4:2017 | Identical |
| PN EN ISO 11114-4 : 2017 | Identical |
| SN EN ISO 11114-4:2017 | Identical |
| UNI EN ISO 11114-4 : 2005 | Identical |
| UNI EN ISO 11114-4 : 2017 | Identical |
| SS-EN ISO 11114-4 : 2017 | Identical |
| IS/ISO 11114 Part 4 : 2017 | Identical |
| UNE-EN ISO 11114-4:2017 | Identical |
| BS EN ISO 11114-4:2005 | Identical |
| EN ISO 11114-4:2017 | Identical |
| DIN EN ISO 11114-4:2015-08 (Draft) | Identical |
| BS EN ISO 11114-4:2017 | Identical |
| BIS IS/ISO 11114-4 : 2005 | Identical |
| ISO 14456:2015 | Gas cylinders — Gas properties and associated classification (FTSC) codes |
| 11/30196123 DC : DRAFT MAY 2011 | BS ISO 11119-2 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 2: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS WITH LOAD-SHARING METAL LINERS |
| BS EN ISO 9809-2:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa |
| 15/30315879 DC : 0 | BS ISO 12619-2:2014/AMD 1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH2) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 14/30281578 DC : 0 | BS ISO 14456 - GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES |
| DIN EN ISO 7539-11:2015-03 | CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING (ISO 7539-11:2013) |
| 12/30251283 DC : 0 | BS ISO 9809-4 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 4: STAINLESS STEEL CYLINDERS WITH AN R[M] VALUE OF LESS THAN 1100 MPA |
| 06/30148176 DC : DRAFT SEP 2006 | ISO 9809-2 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
| DIN EN ISO 11120:2015-05 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
| ISO 7539-11:2013 | Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking |
| BS EN 13807:2017 | Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing |
| BS EN ISO 11114-3:2010 | Gas cylinders. Compatibility of cylinder and valve materials with gas contents Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| ONORM EN 12245 : 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| OVE/ONORM EN 62282-4-101 : 2015 | FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014) |
| SAE J2579:2018(R2023) | Standard for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles |
| BS ISO 12619-1:2014 | Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components General requirements and definitions |
| 17/30341479 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
| BS EN ISO 9809-1:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa |
| 09/30198861 DC : 0 | BS EN ISO 11114-1 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 1: METALLIC MATERIALS |
| I.S. EN ISO 9809-1:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNI EN ISO 9809-3 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| BS ISO 7539-11 : 2013 | CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING |
| 17/30293100 DC : 0 | BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS |
| PREN ISO 11114-3 : DRAFT 2008 | TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENEOUS IGNITION TEST IN OXYGEN ATMOSPHERE |
| 04/102832 DC : DRAFT JAN 2004 | ISO 13985 - LIQUID HYDROGEN - LAND VEHICLE FUEL TANKS |
| I.S. EN ISO 9809-3:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 12/30197519 DC : 0 | BS ISO 12619-1 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 1: GENERAL REQUIREMENTS AND DEFINITIONS |
| NF EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| UNI EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| DD ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks |
| PD ISO/TS 19883:2017 | Safety of pressure swing adsorption systems for hydrogen separation and purification |
| BS ISO 16380 : 2014 | ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| ISO 9809-4:2014 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| BS ISO 12619-2 : 2014 | ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/NATURAL GAS BLEND FUEL SYSTEM COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| ISO 21172-1:2015 | Gas cylinders Welded steel pressure drums up to 3 000 litres capacity for the transport of gases Design and construction Part 1: Capacities up to 1 000 litres |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
| UNE-EN ISO 11120:2015 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
| I.S. EN ISO 11120:2015 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
| I.S. EN 13807:2017 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| I.S. EN ISO 11114-3:2010 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENOUS IGNITION TEST FOR NON-METALLIC MATERIALS IN OXYGEN ATMOSPHERE |
| I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| UNE-EN ISO 7539-11:2015 | Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013) |
| SAE AIR 6464 : 2013 | EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES |
| BS ISO 21172-1:2015 | Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction Capacities up to 1 000 litres |
| 08/30180643 DC : DRAFT APRIL 2008 | BS ISO 15869-3 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS |
| 04/102582 DC : 0 | ISO 15869-1 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 9809-3:2010 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders |
| 08/30195387 DC : 0 | BS EN ISO 11114-3 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENEOUS IGNITION TEST IN OXYGEN ATMOSPHERE |
| SAE J 2579 : 2013 | STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES |
| ISO/TS 19883:2017 | Safety of pressure swing adsorption systems for hydrogen separation and purification |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
| DIN EN 13807:2016-02 (Draft) | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| UNE-EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| CSA B51S1 : 2005 | SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| UNI EN ISO 11114-3 : 2011 | GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 3: AUTOGENOUS IGNITION TEST FOR NON-METALLIC MATERIALS IN OXYGEN ATMOSPHERE |
| UNI EN 12245 : 2011 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| 13/30236754 DC : 0 | BS ISO 16380 - ROAD VEHICLES - BLENDED FUELS REFUELLING CONNECTOR |
| BS ISO 16111:2008 | Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride |
| 06/30148173 DC : DRAFT SEP 2006 | ISO 9809-1 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| PD ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| DIN EN ISO 9809-3:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
| 11/30219194 DC : 0 | BS ISO 7539-11 - CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING |
| BS ISO 9809-4:2014 | Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| 12/30259634 DC : 0 | BS ISO 15399 - GASEOUS HYDROGEN - CYLINDERS AND TUBES FOR STATIONARY STORAGE |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| DIN EN ISO 9809-1:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| I.S. EN ISO 7539-11:2014 | CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING (ISO 7539-11:2013) |
| BS EN ISO 14456:2016 | Gas cylinders. Gas properties and associated classification (FTSC) codes |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| ISO 11120:2015 | Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
| BS EN ISO 11120:2015 | Gas cylinders. Refillable seamless steel tubes of water capacity between 150 l and 3000 l. Design, construction and testing |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| EN ISO 7539-11:2014 | Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013) |
| EN ISO 11120:2015 | Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) |
| EN ISO 9809-1:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa (ISO 9809-1:2010) |
| EN ISO 11114-3:2010 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
| EN ISO 9809-3:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 3: Normalized steel cylinders (ISO 9809-3:2010) |
| EN ISO 9809-2:2010 | Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2010) |
| EN ISO 14456:2016 | Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015) |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| EN 13807:2017 | Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing |
| UNE-EN ISO 14456:2017 | Gas cylinders - Gas properties and associated classification (FTSC) codes (ISO 14456:2015) |
| 12/30197523 DC : 0 | BS ISO 12619-2 - ROAD VEHICLES - COMPRESSED GASEOUS HYDROGEN (CGH[2]) AND HYDROGEN/METHANE BLENDS FUEL COMPONENTS - PART 2: PERFORMANCE AND GENERAL TEST METHODS |
| 13/30264471 DC : 0 | BS ISO 21172-1 - GAS CYLINDERS - WELDED STEEL PRESSURE DRUMS UP TO 3000 LITRES CAPACITY FOR THE TRANSPORT OF GASES - DESIGN AND CONSTRUCTION - PART 1: CAPACITIES UP TO 1000 LITRES |
| 07/30148170 DC : 0 | BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE |
| ISO/TS 16111:2006 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| BS ISO 14456 : 2015 | GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES |
| BS EN ISO 7539-11:2014 | Corrosion of metals and alloys. Stress corrosion cracking Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking |
| DIN EN ISO 9809-2:2010-10 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| 09/30143423 DC : DRAFT MAY 2009 | BS EN ISO 11120 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN CONSTRUCTION AND TESTING |
| ISO 12619-2:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 2: Performance and general test methods |
| UNI EN ISO 9809-2 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| I.S. EN ISO 14456:2016 | GAS CYLINDERS - GAS PROPERTIES AND ASSOCIATED CLASSIFICATION (FTSC) CODES (ISO 14456:2015) |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| I.S. EN ISO 9809-2:2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
| ISO 12619-1:2014 | Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 1: General requirements and definitions |
| ISO 16380:2014 | Road vehicles — Blended fuels refuelling connector |
| ONORM EN ISO 9809-1 : 2010 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
| DIN EN ISO 11114-3:2011-04 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
| UNE-EN ISO 11114-3:2011 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| DIN EN 13807:2017-05 | TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES AND MULTIPLE-ELEMENT GAS CONTAINERS (MEGCS) - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ASME STP-PT-017 : 2008 | PROPERTIES FOR COMPOSITE MATERIALS IN HYDROGEN SERVICE |
| ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| FD E29 753 : 2014 FD | GAS CYLINDERS - HYDROGEN COMPATIBILITY TESTING FOR METALS |
| ISO 9809-4:2014 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa |
| SA TS 19883:2020 | Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD) |
| ISO 7539-6:2011 | Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement |
| ISO 11120:2015 | Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ISO 7539-1:2012 | Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.