ISO 10993-1:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
05-03-2019
Superseded by
Published date
13-10-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 10993-1:2009 describes:
- the general principles governing the biological evaluation of medical devices within a risk management process;
- the general categorization of devices based on the nature and duration of their contact with the body;
- the evaluation of existing relevant data from all sources;
- the identification of gaps in the available data set on the basis of a risk analysis;
- the identification of additional data sets necessary to analyse the biological safety of the medical device;
- the assessment of the biological safety of the medical device.
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN-EN-ISO 10993-1:2009-10 | Identical |
| SN EN ISO 10993-1:2010 | Identical |
| SS-EN ISO 10993-1:2009 | Identical |
| PN-EN ISO 10993-1:2010 | Identical |
| DIN EN ISO 10993-1:2010-04 | Identical |
| AAMI ISO 10993-1:2009 | Identical |
| GOST R ISO 10993-1 : 2009 | Identical |
| DIN EN 30993-1:1994-12 | Similar to |
| NF EN ISO 10993-1 : 2010 | Identical |
| UNE-EN 30993-1:1994 | Identical |
| EN ISO 10993-1:2009 | Identical |
| UNI EN ISO 10993-1 : 2010 | Identical |
| PN EN ISO 10993-1 : 2010 AC 2010 | Identical |
| BS EN ISO 10993-1:2009 | Identical |
| NS EN ISO 10993-1 : 2009 COR 2010 | Identical |
| GOST ISO 10993-1 : 2011 | Identical |
| NEN ISO 10993-1 : 1994 | Similar to |
| UNE-EN ISO 10993-1:2010 | Identical |
| BS EN 30993-1:1994 | Similar to |
| BS EN ISO 10993-1 : 2009-10 | Identical |
| ONORM EN ISO 10993-1 : 2011 | Identical |
| I.S. EN ISO 10993-1:2009+AC:2010 | Identical |
| CSA ISO 10993-1 : 2001 | Identical |
| AAMI ISO 10993-1 : 2009 : R2013 | Identical |
| EN 30993-1 : 1994 | Similar to |
| I.S. EN ISO 4049:2009 | DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
| ONORM EN ISO 10993-11 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 13/30271558 DC : 0 | BS EN ISO 15841 - DENTISTRY - WIRES FOR USE IN ORTHODONTICS |
| ASTM F 2224 : 2009 : R2014 | Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
| 99/562423 DC : DRAFT APR 99 | BS:ENISO 14937 - STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL CRITERIA FOR CHARACTERIZATION OF A STERILIZING AGENT AND DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS |
| 03/108761 DC : DRAFT MAY 2003 | EN ISO 10477 - DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
| UNE-EN ISO 25539-2:2013 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 10993-10 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SENSITIZATION |
| 13/30263420 DC : 0 | BS EN ISO 17730 - DENTISTRY - FLUORIDE VARNISHES |
| BS ISO 16840-2:2018 | Wheelchair seating Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| ISO 14708-7:2013 | Implants for surgery Active implantable medical devices Part 7: Particular requirements for cochlear implant systems |
| AAMI RD17 : 2007 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS |
| I.S. EN ISO 5840:2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| I.S. EN ISO 5364:2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS (ISO 5364:2016) |
| 01/562154 DC : DRAFT JUNE 2001 | BS EN ISO 10993-12 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| 12/30228200 DC : 0 | BS ISO 8600-1 - ENDOSCOPES - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 12180:2000 | NON-ACTIVE SURGICAL IMPLANTS - BODY CONTOURING IMPLANTS - SPECIFIC REQUIREMENTS FOR MAMMARY IMPLANTS |
| 10/30212297 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES |
| DD ISO/TS 10993-20:2006 | Biological evaluation of medical devices Principles and methods for immunotoxicology testing of medical devices |
| ANSI/AAMI/ISO 10993-3:2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY, AND REPRODUCTIVE TOXICITY |
| BS ISO 18562-1:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications Evaluation and testing within a risk management process |
| DIN EN ISO 20795-2:2013-06 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 07/30160957 DC : 0 | EN ISO 10993-5 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
| 16/30333382 DC : 0 | BS EN ISO 22112 - DENTISTRY - ARTIFICIAL TEETH FOR DENTAL PROSTHESES |
| BS EN ISO 1135-5:2015 | Transfusion equipment for medical use Transfusion sets for single use with pressure infusion apparatus |
| I.S. EN ISO 22523:2006 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-10:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| 13/30276989 DC : 0 | BS EN ISO 11070 - STERILE, SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS |
| BS EN ISO 5840-2:2015 | Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes |
| PD ISO/TS 17665-3:2013 | Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| ISO/TS 20993:2006 | Biological evaluation of medical devices Guidance on a risk-management process |
| I.S. EN 13824:2005 | STERILIZATION OF MEDICAL DEVICES - ASEPTIC PROCESSING OF LIQUID MEDICAL DEVICES - REQUIREMENTS |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| I.S. EN 12022:1999 | BLOOD GAS EXCHANGERS |
| I.S. EN ISO 16744:2004 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
| 04/30103836 DC : DRAFT JUL 2004 | ISO 11979-5 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 5: BIOCOMPATIBILITY |
| 16/30331650 DC : 0 | BS EN ISO 8637-1 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 1: HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| I.S. EN 13503-8:2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 8: FUNDAMENTAL REQUIREMENTS |
| I.S. EN ISO 1135-5:2015 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015) |
| 17/30302767 DC : 0 | BS ISO 13779-2 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 2: THERMALLY SPRAYED COATINGS OF HYDROXYAPATITE |
| I.S. EN ISO 10555-1:2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017) |
| DIN EN ISO 13017:2016-05 | DENTISTRY - MAGNETIC ATTACHMENTS (ISO 13017:2012 + AMD.1:2015) |
| AAMI ISO 10993-11 : 2006 : R2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| UNI EN ISO 10271 : 2011 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
| BS ISO 18562-4:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications Tests for leachables in condensate |
| CSA Z10535.1 : 2015 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| 04/300654 DC : DRAFT JAN 2004 | BS EN ISO 14630 - NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| 14/30295067 DC : 0 | BS EN ISO 16671 - OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY |
| 02/564514 DC : DRAFT OCT 2002 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| DIN EN ISO 7197:2009-08 | NEUROSURGICAL IMPLANTS - STERILE, SINGLE-USE HYDROCEPHALUS SHUNTS AND COMPONENTS |
| 16/30339666 DC : 0 | BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
| 05/30138123 DC : DRAFT AUG 2005 | BS ISO 8836 - SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| 03/100426 DC : DRAFT JAN 2003 | BS EN ISO 10993-18 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| 00/561676 DC : DRAFT APRIL 2000 | DRAFT BS EN ISO 10993-3 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| 08/30187781 DC : DRAFT AUG 2008 | BS EN ISO 10993-16 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| BS ISO 13175-3:2012 | Implants for surgery. Calcium phosphates Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| ISO 10993-11:2017 | Biological evaluation of medical devices — Part 11: Tests for systemic toxicity |
| 17/30332162 DC : 0 | BS EN ISO 7494-1 - DENTISTRY - STATIONARY DENTAL UNITS AND DENTAL PATIENT CHAIRS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 13179-1:2014 | Implants for surgery Plasma-sprayed unalloyed titanium coatings on metallic surgical implants Part 1: General requirements |
| 04/30081258 DC : DRAFT MARCH 2004 | BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS |
| I.S. EN ISO 10555-6:2017 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015) |
| 11/30212473 DC : 0 | BS EN ISO 10993-3 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| DIN EN ISO 8638:2014-03 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010) |
| 14/30297754 DC : 0 | BS EN ISO 16408 - DENTISTRY - ORAL HYGIENE PRODUCTS - ORAL RINSES |
| BS ISO 18666:2015 | Traditional Chinese medicine. General requirements of moxibustion devices |
| 17/30357486 DC : 0 | BS EN ISO 15747 - PLASTIC CONTAINERS FOR INTRAVENOUS INJECTIONS |
| BS ISO 11040-3:2012 | Prefilled syringes Seals for dental local anaesthetic cartridges |
| BS EN ISO 16671 : 2015 | OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY |
| 15/30278540 DC : 0 | BS ISO 18562-4 - BIOCOMPATIBILITY EVALUATION OF BREATHING GAS PATHWAYS IN HEALTHCARE APPLICATIONS - PART 4: TESTS FOR LEACHABLES IN CONDENSATE |
| 15/30314608 DC : 0 | BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS |
| 10/30205392 DC : 0 | BS ISO 7494-1 - DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 16/30282706 DC : 0 | BS ISO 11608-6 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 6: ON-BODY DELIVERY SYSTEMS |
| BS EN ISO 8638:2014 | Cardiovascular implants and extracorporeal systems. Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters |
| BS EN ISO 13688:2013 | Protective clothing. General requirements |
| PREN ISO 24234 : DRAFT 2013 | DENTISTRY - DENTAL AMALGAM (ISO/DIS 24234:2013) |
| 17/30351717 DC : 0 | BS EN ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| 12/30266398 DC : 0 | BS EN ISO 20795-2 - DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
| ANSI/AAMI/ISO 25539-2:2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS |
| 12/30266392 DC : 0 | BS EN ISO 20795-1 - DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS |
| 03/103025 DC : DRAFT JAN 2003 | BS EN ISO 11199-2 - WALKING AIDS MANIPULATED BY BOTH ARMS - REQUIREMENTS AND TEST METHODS - PART 2: ROLLATORS |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 02/565247 DC : DRAFT DEC 2002 | ISO 8637 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| BS ISO 14972:1998 | Sterile obturators for single use with over-needle peripheral intravascular catheters |
| CSA ISO 10993-4 : 1997 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| CSA ISO 8637 : 2012 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| 08/30133979 DC : DRAFT MAY 2008 | BS ISO 23409 - MALE CONDOMS - REQUIREMENTS AND TEST METHODS FOR CONDOMS MADE FROM SYNTHETIC MATERIALS |
| ASTM F 2560 : 2006 | Standard Specification for Supralaryngeal Airways and Connectors |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 8637 : 2012 : R2017 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| I.S. EN ISO 14607:2009 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018) |
| DIN EN ISO 21563:2013-12 | Dentistry - Hydrocolloid impression materials (ISO 21563:2013) |
| ISO 23409:2011 | Male condoms Requirements and test methods for condoms made from synthetic materials |
| CSA ISO 14971 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| DIN EN ISO 3630-5:2012-01 | DENTISTRY - ENDODONTIC INSTRUMENTS - PART 5: SHAPING AND CLEANING INSTRUMENTS (ISO 3630-5:2011) |
| CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
| AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| ONORM EN ISO 5840-3 : 2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
| ISO 5910:2018 | Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices |
| DIN EN ISO 7199:2015-06 (Draft) | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016) |
| ISO 19227:2018 | Implants for surgery — Cleanliness of orthopedic implants — General requirements |
| BS EN ISO 10993-16:2017 | Biological evaluation of medical devices Toxicokinetic study design for degradation products and leachables |
| CSA Z314.14 : 2015 | SELECTION AND USE OF PACKAGING (STERILE BARRIER SYSTEMS) IN HEALTHCARE SETTINGS |
| ANSI/AAMI/ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES |
| ISO 4049:2009 | Dentistry Polymer-based restorative materials |
| CSA ISO 7199 : 0 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
| ISO 18397:2016 | Dentistry Powered scaler |
| S.R. CEN ISO/TS 16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 (ISO/TS 16775:2014) |
| CAN/CSA-ISO/TS 16775:17 | Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2 (Adopted ISO technical specification 16775:2014, first edition, 2014-05-15) |
| ANSI/AAMI/ISO 10993-14:2001(R2011) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS |
| DIN EN ISO 14607:2009-08 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS |
| ANSI/AAMI/ISO 15674:2016 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS |
| AAMI ISO 10993-2 : 2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 2: ANIMAL WELFARE REQUIREMENTS |
| AAMI ISO 10993-5 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
| AAMI AT6 : 2013 | AUTOLOGOUS TRANSFUSION DEVICES |
| AAMI ISO 10993-17 : 2002 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 17: ESTABLISHMENT OF ALLOWABLE LIMITS FOR LEACHABLE SUBSTANCES |
| ISO/TR 15499:2016 | Biological evaluation of medical devices Guidance on the conduct of biological evaluation within a risk management process |
| CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN ISO 22442-1:2016 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
| ASTM F 2848 : 2017 : REDLINE | Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
| ONORM EN ISO 14607 : 2009 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS |
| I.S. EN ISO 10993-11:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY (ISO 10993-11:2006) |
| UNE-EN ISO 1135-3:2017 | Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
| UNI EN ISO 28319 : 2010 | DENTISTRY - LASER WELDING |
| I.S. EN ISO 10993-16:2017 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES (ISO 10993-16:2010) |
| ASTM F 623 : 1999 : R2006 | Standard Performance Specification for Foley Catheter |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 17/30358661 DC : 0 | BS EN 13795-2 - SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 2: CLEAN AIR SUITS |
| 17/30360912 DC : 0 | BS EN 868-10 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014) |
| CSA ISO 10993-7 : 1998 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| UNI EN 14683 : 2014 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| ISO 14607:2007 | Non-active surgical implants Mammary implants Particular requirements |
| CSA Z364.1.1-Z364.1.2 : 0 | HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS/EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYZERS, HAEMOFILTERS, AND HAEMOCONCENTRATORS |
| DIN EN ISO 11070:2015-03 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014) |
| ISO 7405:2008 | Dentistry Evaluation of biocompatibility of medical devices used in dentistry |
| ISO 11070:2014 | Sterile single-use intravascular introducers, dilators and guidewires |
| ASTM F 3089 : 2014 | Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions |
| ISO 5832-14:2007 | Implants for surgery Metallic materials Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| ISO 15676:2016 | Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) |
| PD ISO/TS 17137:2014 | Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants |
| ISO 10993-4:2017 | Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood |
| ASTM F 2027 : 2016 : REDLINE | Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products |
| I.S. EN ISO 3826-1:2013 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS (ISO 3826-1:2013) |
| DIN EN ISO 11979-5:2010-11 | Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:2006) |
| DIN EN ISO 11499:2014-09 | DENTISTRY - SINGLE-USE CARTRIDGES FOR LOCAL ANAESTHETICS (ISO 11499:2014) |
| DIN EN ISO 22442-1:2016-05 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
| UNE-EN ISO 24234:2015 | Dentistry - Dental amalgam (ISO 24234:2015) |
| DIN EN ISO 7376:2010-01 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| DIN EN 1642:2012-06 | Dentistry - Medical devices for dentistry - Dental implants |
| EN ISO 10993-9:2009 | Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) |
| DIN EN ISO 11609:2016-07 (Draft) | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| BS EN ISO 6871-1:1997 | Dental base metal casting alloys Cobalt-based alloys |
| UNE-EN ISO 16408:2016 | Dentistry - Oral care products - Oral rinses (ISO 16408:2015) |
| BS EN 1782 : 1998 | TRACHEAL TUBES AND CONNECTORS |
| BS EN ISO 10139-2:2009 | Dentistry. Soft lining materials for removable dentures Materials for long-term use |
| BS EN 867-5:2001 | Non-biological systems for use in sterilizers Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S |
| BS EN ISO 1561:1998 | Dental casting wax |
| BS EN ISO 10993-12:2012 | Biological evaluation of medical devices Sample preparation and reference materials |
| ISO 10993-9:2009 | Biological evaluation of medical devices Part 9: Framework for identification and quantification of potential degradation products |
| BS EN ISO 11499:2014 | Dentistry. Single-use cartridges for local anaesthetics |
| ISO 81060-1:2007 | Non-invasive sphygmomanometers — Part 1: Requirements and test methods for non-automated measurement type |
| ISO 8637:2010 | Cardiovascular implants and extracorporeal systems Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators |
| UNE-EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| BS EN ISO 22803:2005 | Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file |
| BS EN ISO 7885:2010 | Dentistry. Sterile injection needles for single use |
| BS EN ISO 10271:2011 | Dentistry. Corrosion test methods for metallic materials |
| BS EN ISO 7153-1:2016 | Surgical instruments. Materials Metals |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 455-3:2015 | Medical gloves for single use Requirements and testing for biological evaluation |
| ISO 8638:2010 | Cardiovascular implants and extracorporeal systems Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters |
| UNE-EN ISO 10993-6:2017 | Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2016) |
| BS EN ISO 22523:2006 | External limb prostheses and external orthoses. Requirements and test methods |
| BS EN ISO 14534:2015 | Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 9394:2012 | Ophthalmic optics. Contact lenses and contact lens care products. Determination of biocompatibility by ocular study with rabbit eyes |
| BS EN ISO 14160:2011 | Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| ISO 9394:2012 | Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study with rabbit eyes |
| BS EN 12342 : 1998 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| BS EN ISO 7376 : 2009-08 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| UNE-EN ISO 16672:2016 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| BS EN ISO 14630:2012 | Non-active surgical implants. General requirements |
| BS EN ISO 10993-3:2014 | Biological evaluation of medical devices Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| BS EN 13824:2004 | Sterilization of medical devices. Aseptic processing of liquid medical devices. Requirements |
| BS EN ISO 6876:2012 | Dentistry. Root canal sealing materials |
| DIN EN 12342:1998-09 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| I.S. EN ISO 11608-1:2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| DIN EN 12342:2010-01 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| I.S. EN ISO 10535:2006 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 12470-3:2000-04 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| EN 12011 : 1998 | INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| EN 1282-2:2005+A1:2009 | Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified) |
| EN 13503-8 : 2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 8: FUNDAMENTAL REQUIREMENTS |
| EN ISO 5364:2016 | Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| EN 12181:1998 | Oropharyngeal airways |
| EN ISO 8638:2014 | Cardiovascular implants and extracorporeal systems - Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (ISO 8638:2010) |
| EN 12022:1999 | Blood gas exchangers |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN ISO 22523:2006 | External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006) |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 9693 : 2000 | METAL-CERAMIC DENTAL RESTORATIVE SYSTEMS |
| EN 12470-3:2000+A1:2009 | Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device |
| UNI EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN 12180 : 2000 | NON-ACTIVE SURGICAL IMPLANTS - BODY CONTOURING IMPLANTS - SPECIFIC REQUIREMENTS FOR MAMMARY IMPLANTS |
| CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) |
| EN ISO 5366-1:2009 | Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000) |
| EN 12470-2:2000+A1:2009 | Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers |
| NF EN ISO 10993-18 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| UNI EN ISO 10993-12 : 2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| ONORM EN ISO 10993-2 : 2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 2: ANIMAL WELFARE REQUIREMENTS |
| NF EN ISO 10993-10 : 2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| VDI 5700 Blatt 1:2015-04 | Reprocessing hazards - Risk management in reprocessing of medical devices - Measures for risk control |
| ONORM EN ISO 7439 : 2015 | COPPER-BEARING CONTRACEPTIVE INTRAUTERINE DEVICES - REQUIREMENTS AND TESTS (ISO 7439:2015) |
| ONORM EN ISO 9333 : 2006 | DENTISTRY - BRAZING MATERIALS |
| ONORM EN ISO 11608-1 : 2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| ONORM EN ISO 11608-3 : 2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS (ISO 11608-3:2012) |
| ANSI Z80.27 : 2014 | OPHTHALMICS - IMPLANTABLE GLAUCOMA DEVICES |
| DIN EN ISO 28399:2011-05 | DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
| ONORM EN ISO 11979-5 : 2010 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 5: BIOCOMPATIBILITY |
| DIN EN ISO 3826-4:2015-12 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES (ISO 3826-4:2015) |
| UNI EN ISO 26782 : 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - SPIROMETERS INTENDED FOR THE MEASUREMENT OF TIME FORCED EXPIRED VOLUMES IN HUMANS |
| ISO 13960:2010 | Cardiovascular implants and extracorporeal systems Plasmafilters |
| 06/30160058 DC : 0 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| BS ISO 17966:2016 | Assistive products for personal hygiene that support users. Requirements and test methods |
| EN ISO 7494-1:2011 | Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2011) |
| BS EN ISO 20072:2013 | Aerosol drug delivery device design verification. Requirements and test methods |
| 13/30283691 DC : 0 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| UNE-EN ISO 17730:2015 | Dentistry - Fluoride varnishes (ISO 17730:2014) |
| AAMI ISO 81060-1 : 2007 | NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| ISO 11199-2:2005 | Walking aids manipulated by both arms Requirements and test methods Part 2: Rollators |
| 17/30345938 DC : 0 | BS ISO 20698 - CATHETER SYSTEMS FOR NEURAXIAL APPLICATION - STERILE AND SINGLE-USE CATHETERS AND ACCESSORIES |
| I.S. EN ISO 21563:2013 | DENTISTRY - HYDROCOLLOID IMPRESSION MATERIALS (ISO 21563:2013) |
| UNE-EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| 07/30169357 DC : 0 | BS ISO 25841 - FEMALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| 10/30214551 DC : 0 | BS ISO 20126 - DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS |
| ASTM F 2224 : 2009 | Standard Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants |
| UNI EN 868-10 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 8836:2014 | Suction catheters for use in the respiratory tract |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 8600-1:2015 | Endoscopes. Medical endoscopes and endotherapy devices General requirements |
| I.S. EN ISO 1567:2000 | DENTISTRY - DENTURE BASE POLYMERS |
| BS ISO 5832-14:2007 | Implants for surgery. Metallic materials Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| 09/30168902 DC : DRAFT JAN 2009 | BS ISO 27020 - DENTISTRY - BRACKETS AND TUBES FOR USE IN ORTHODONTICS |
| AAMI/ISO TIR15499:2017 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - GUIDANCE ON THE CONDUCT OF BIOLOGICAL EVALUATION WITHIN A RISK MANAGEMENT PROCESS |
| 15/30310645 DC : 0 | BS EN ISO 8536-14 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 14: CLAMPS AND FLOW REGULATORS FOR TRANSFUSION AND INFUSION EQUIPMENT WITHOUT FLUID CONTACT |
| UNE-EN ISO 13504:2013 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| 04/30085448 DC : DRAFT MARCH 2004 | ISO 15854 - DENTISTRY - CASTING AND BASEPLATE WAXES |
| 16/30346829 DC : 0 | BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS |
| DIN EN ISO 9693-1:2012-06 | DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS (ISO 9693-1:2012) |
| CSA Z8638 : 2008 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| I.S. EN ISO 8536-14:2018 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 14: CLAMPS AND FLOW REGULATORS FOR TRANSFUSION AND INFUSION EQUIPMENT WITHOUT FLUID CONTACT (ISO 8536-14:2016) |
| PREN 14683 : DRAFT 2017 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| PD CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices. Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| PREN 13795-1 : DRAFT 2017 | SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 1: SURGICAL DRAPES AND GOWNS |
| BS ISO 19614:2017 | Traditional Chinese medicine. Pulse graph force transducer |
| 13/30267665 DC : 0 | BS EN ISO 24234 - DENTISTRY - DENTAL AMALGAM |
| UNI EN ISO 10873 : 2010 | DENTISTRY - DENTURE ADHESIVES |
| 08/30168815 DC : DRAFT MAR 2008 | BS EN ISO 4049 - DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
| 16/30332214 DC : 0 | BS EN ISO 9917-2 - DENTISTRY - WATER-BASED CEMENTS - PART 2: RESIN-MODIFIED CEMENTS |
| ANSI/AAMI/ISO 15675:2016 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS |
| 03/105714 DC : DRAFT MAR 2003 | ISO 24234 - DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM |
| 08/30179586 DC : DRAFT MAR 2008 | BS ISO 7199 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
| UNI EN ISO 7376 : 2009-10 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| AAMI ISO 5361 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| 07/30167336 DC : DRAFT AUG 2007 | BS EN 868-10 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES FOR USE IN THE MANUFACTURE OF SEALABLE POUCHES, REELS AND LIDS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 1135-5:2016-06 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 1135-5:2015) |
| DIN EN ISO 1135-3 E : 2017 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| ISO 20696:2018 | Sterile urethral catheters for single use |
| BS EN ISO 21563:2013 | Dentistry. Hydrocolloid impression materials |
| UNI EN ISO 5367 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS |
| AAMI ISO 10993-7:2008(R2012) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| BS EN ISO 8536-13:2016 | Infusion equipment for medical use Graduated flow regulators for single use with fluid contact |
| 15/30321715 DC : 0 | BS ISO 15675 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS |
| 17/30357741 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| ISO 11040-6:2012 | Prefilled syringes Part 6: Plastic barrels for injectables |
| 14/30303657 DC : 0 | BS EN ISO 1135-3 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SET FOR SINGLE USE |
| I.S. EN ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
| 14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
| 16/30301330 DC : 0 | BS ISO 19614 - TRADITIONAL CHINESE MEDICINE - PULSE GRAPH FORCE TRANSDUCER |
| BS ISO 11658:2012 | Cardiovascular implants and extracorporeal systems. Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| 14/30292011 DC : 0 | BS EN ISO 23747 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS |
| ISO 20308:2017 | Traditional Chinese medicine — Gua Sha instruments |
| BS EN ISO 7199:2017 | Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators) |
| BS ISO 13179-1:2014 | Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants General requirements |
| 06/30145887 DC : DRAFT FEB 2006 | EN ISO 10993-12 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| 11/30212235 DC : 0 | BS EN ISO 13504 - DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| 04/19976241 DC : DRAFT AUG 2004 | |
| 13/30281504 DC : 0 | BS EN 455-3 - MEDICAL GLOVES FOR SINGLE USE - PART 3: REQUIREMENTS AND TESTING FOR BIOLOGICAL EVALUATION |
| 15/30321712 DC : 0 | BS ISO 15674 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS |
| 15/30321957 DC : 0 | BS EN ISO 7199 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS BLOOD-GAS EXCHANGERS (OXYGENATORS) |
| ISO 18189:2016 | Ophthalmic optics Contact lenses and contact lens care products Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions |
| 15/30280904 DC : 0 | BS ISO 18190 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT |
| 02/563622 DC : DRAFT AUG 2002 | BS EN ISO 1562 - DENTISTRY - CASTING GOLD ALLOYS |
| 17/30323851 DC : 0 | BS ISO 19894 - WALKING TROLLEYS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 9693-2:2016 | Dentistry. Compatibility testing Ceramic-ceramic systems |
| BS EN 868-9:2009 | Packaging for terminally sterilized medical devices Uncoated nonwoven materials of polyolefines. Requirements and test methods |
| BS ISO 18241:2016 | Cardiovascular implants and extracorporeal systems. Cardiopulmonary bypass systems. Venous bubble traps |
| 06/30097290 DC : DRAFT FEB 2006 | ISO 10993-7 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| 17/30286363 DC : 0 | BS EN ISO 19023 - DENTISTRY - ORTHODONTIC ANCHOR SCREWS |
| 14/30294895 DC : 0 | BS EN ISO 8537 - STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN |
| 14/30281863 DC : 0 | BS EN ISO 5364 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS |
| BS EN 45502-2-3:2010 | Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems |
| 04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 06/30160368 DC : 0 | BS EN 80100 - BASIC SAFETY AND ESSENTIAL PERFORMANCE REQUIREMENTS OF CLINICAL THERMOMETER FOR BODY TEMPERATURE MEASUREMENT |
| 09/30168835 DC : 0 | BS EN ISO 7885 - STERILE DENTAL INJECTION NEEDLES FOR SINGLE USE |
| 03/103026 DC : DRAFT JAN 2003 | BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| UNI EN ISO 3630-5 : 2012 | DENTISTRY - ENDODONTIC INSTRUMENTS - PART 5: SHAPING AND CLEANING INSTRUMENTS |
| AAMI ISO 5840 : 2005 : R2010 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| BS ISO 15674:2009 | Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
| 15/30303073 DC : 0 | BS ISO 25841 - FEMALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| 09/30168908 DC : DRAFT FEB 2009 | BS ISO 28319 - DENTISTRY - SUITABILITY OF METALLIC MATERIALS FOR LASER WELDING |
| 15/30290736 DC : 0 | BS EN ISO 10993-4 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| 08/30179592 DC : DRAFT MAR 2008 | BS ISO 15675 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS |
| BS ISO 81060-1 : 2007 COR 2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| 16/30302520 DC : 0 | BS ISO 19611 - TRADITIONAL CHINESE MEDICINE - AIR EXHAUST CUPPING APPARATUS FOR MEDICAL USE |
| AAMI ISO 5840 :2005 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| BS EN ISO 20795-1:2013 | Dentistry. Base polymers Denture base polymers |
| DIN EN ISO 10555-6:2017-11 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015) |
| ASTM F 3087 : 2015 | Standard Specification for Acrylic Molding Resins for Medical Implant Applications |
| 09/30173553 DC : 0 | BS ISO 10873 - DENTISTRY - DENTURE ADHESIVES |
| CSA Z8836 :2011 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI/ISO TIR17665-3:2014(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| CSA Z8836 : 2011 : R2015 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| ISO/TR 11991:1995 | Guidance on airway management during laser surgery of upper airway |
| UNI CEN ISO/TS 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| BS EN ISO 10555-1 : 2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 5361:2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS (ISO/DIS 5361:2014) |
| UNI EN ISO 5840-3 : 2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES |
| CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ASTM F 2064 : 2017 : REDLINE | Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| ISO 11712:2009 | Anaesthetic and respiratory equipment — Supralaryngeal airways and connectors |
| EN ISO 8536-14:2018 | Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016) |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| CSA Z314.10.1 : 2015 | SELECTION AND USE OF GOWNS AND DRAPES INTENDED FOR USE IN HEALTH CARE SETTINGS |
| BS ISO 7199 : 2009 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
| UNE-EN ISO 20072:2013 | Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009) |
| BS EN ISO 11070 : 2014 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES |
| ISO/TR 37137:2014 | Cardiovascular biological evaluation of medical devices — Guidance for absorbable implants |
| ASTM F 2475 : 2011 : REDLINE | Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials |
| I.S. EN ISO 27020:2010 | DENTISTRY - BRACKETS AND TUBES FOR USE IN ORTHODONTICS |
| UNE-EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
| BS EN ISO 10993-11:2009 | Biological evaluation of medical devices Tests for systemic toxicity |
| AAMI ISO 5367 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS |
| 17/30360918 DC : 0 | BS EN 868-9 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 14457:2017 | DENTISTRY - HANDPIECES AND MOTORS (ISO 14457:2017) |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 15676:2016 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO) |
| AAMI BE83 : 2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| BS EN ISO 13017 : 2012 | DENTISTRY - MAGNETIC ATTACHMENTS |
| AAMI ISO 8638 : 2010 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS |
| I.S. EN ISO 12417-1:2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015) |
| AAMI ISO TIR 17137 : 2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOVASCULAR ABSORBABLE IMPLANTS |
| AAMI ISO 8836 : 2015 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| AAMI ISO 8638 : 2010 : R2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS |
| AAMI TIR30 : 2011 | A COMPENDIUM OF PROCESSES, MATERIALS, TEST METHODS, AND ACCEPTANCE CRITERIA FOR CLEANING REUSABLE MEDICAL DEVICES |
| UNE-EN ISO 1135-5:2016 | Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015) |
| ISO 18562-1:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process |
| ISO/TR 10993-9:1994 | Biological evaluation of medical devices — Part 9: Degradation of materials related to biological testing |
| DIN EN ISO 10477:2005-01 | DENTISTRY - POLYMER BASED CROWN AND BRIDGE MATERIALS |
| I.S. EN ISO 8536-13:2016 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 13: GRADUATED FLOW REGULATORS FOR SINGLE USE WITH FLUID CONTACT (ISO 8536-13:2016) |
| UNI EN ISO 14607 : 2009 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS |
| CSA ISO 11712:14 (R2019) | Anaesthetic and respiratory equipment - Supralaryngeal airways and connectors (Adopted ISO 11712:2009, first edition, 2009-05-15) |
| BS EN ISO 14607:2009 | Non-active surgical implants. Mammary implants. Particular requirements |
| BS EN ISO 5367:2014 | Anaesthetic and respiratory equipment. Breathing sets and connectors |
| UNE-EN ISO 14457:2013 | Dentistry - Handpieces and motors (ISO 14457:2012) |
| UNE-EN ISO 5367:2015 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| CSA ISO 10993-13 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES |
| CSA ISO 10993-16 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| ONORM EN ISO 7405 : 2013 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008 + AMD 1:2013) |
| ISO 18666:2015 | Traditional Chinese medicine General requirements of moxibustion devices |
| UNI EN ISO 28399 : 2011 | DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
| BS EN ISO 6872 : 2015 | DENTISTRY - CERAMIC MATERIALS |
| UNE-EN ISO 9693-1:2012 | Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012) |
| UNI EN 868-9 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| ASTM F 623 : 1999 : R2013 | Standard Performance Specification for Foley Catheter |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 14457:2017 | Dentistry — Handpieces and motors |
| BS EN 868-10:2009 | Packaging for terminally sterilized medical devices Adhesive coated nonwoven materials of polyolefines. Requirements and test methods |
| EN ISO 21563:2013 | Dentistry - Hydrocolloid impression materials (ISO 21563:2013) |
| ASTM F 2051 : 2000 : R2014 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| UNI EN ISO 10993-11 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| ASTM F 3036 : 2013 | Standard Guide for Testing Absorbable Stents |
| NF EN ISO 7376 : NOV 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| DIN EN ISO 3826-1:2013-09 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS (ISO 3826-1:2013) |
| DIN EN ISO 10271:2011-10 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
| ISO 8836:2014 | Suction catheters for use in the respiratory tract |
| ISO 5367:2014 | Anaesthetic and respiratory equipment — Breathing sets and connectors |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| I.S. EN ISO 14971:2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
| UNI EN ISO 3826-1 : 2013 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS |
| DIN EN 1641:2010-02 | Dentistry - Medical devices for dentistry - Materials |
| DIN EN ISO 6875:2011-10 | DENTISTRY - PATIENT CHAIR |
| DIN EN ISO 23747:2015-12 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS (ISO 23747:2015) |
| DIN EN ISO 1135-4:2016-06 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
| DIN EN ISO 6876:2012-10 | Dentistry - Root canal sealing materials (ISO 6876:2012) |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN ISO 22112:2016-04 (Draft) | DENTISTRY - ARTIFICIAL TEETH FOR DENTAL PROSTHESES (ISO 22112:2017) |
| DIN EN 12470-2:2009-11 | Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers (includes Amendment A1:2009) |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| DIN EN 1782:2009-12 | TRACHEAL TUBES AND CONNECTORS |
| DIN EN ISO 22803:2006-01 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004) |
| DIN EN ISO 22674:2016-09 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| DIN EN ISO 11199-2:2005-07 | Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2005) |
| DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| DIN EN ISO 10993-18:2009-08 | Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005); German version EN ISO 10993-18:2009 |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| DIN EN ISO 16672:2015-12 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| DIN EN ISO 10993-12:2012-10 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| DIN EN ISO 9394:2013-01 | Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:2012) |
| BS EN ISO 7864:2016 | Sterile hypodermic needles for single use. Requirements and test methods |
| BS EN ISO 10535:2006 | Hoists for the transfer of disabled persons. Requirements and test methods |
| UNE-EN ISO 3107:2011 | Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO/FDIS 3107:2010) |
| UNE-EN ISO 11608-3:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| BS EN ISO 10993-15:2009 | Biological evaluation of medical devices Identification and quantification of degradation products from metals and alloys |
| BS EN ISO 10993-5:2009 | Biological evaluation of medical devices Tests for in vitro cytotoxicity |
| BS EN ISO 7439:2015 | Copper-bearing contraceptive intrauterine devices. Requirements and tests |
| BS EN 45502-1:2015 | Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer |
| UNE-EN ISO 8536-4:2013 | Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) |
| BS EN ISO 10993-6:2016 | Biological evaluation of medical devices Tests for local effects after implantation |
| BS EN ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Application of risk management |
| UNE-EN ISO 10993-10:2013 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| BS EN ISO 10993-9 : 2009-12 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| UNE-EN ISO 23747:2016 | Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015) |
| ISO 7199:2016 | Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 12470-3 : 2000 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| I.S. EN ISO 10993-6:2016 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION (ISO 10993-6:2016) |
| I.S. EN ISO 14534:2015 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011) |
| EN ISO 15841:2014 | Dentistry - Wires for use in orthodontics (ISO 15841:2014) |
| I.S. EN ISO 6875:2011 | DENTISTRY - PATIENT CHAIR |
| EN ISO 15854:2005 | Dentistry - Casting and baseplate waxes (ISO 15854:2005) |
| I.S. EN ISO 5366-1:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS |
| EN ISO 5840-2:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| I.S. EN ISO 22794:2009 | DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| I.S. EN ISO 7153-1:2016 | SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016) |
| I.S. EN ISO 23747:2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS (ISO 23747:2015) |
| I.S. EN ISO 1135-4:2015 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
| ONORM EN ISO 7376 : 2010 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| I.S. EN ISO 22112:2017 | DENTISTRY - ARTIFICIAL TEETH FOR DENTAL PROSTHESES (ISO 22112:2017) |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ONORM EN ISO 25539-2 : 2013 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS (ISO 25539-2:2012) |
| DIN EN 12470-4:2001-02 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| ONORM EN ISO 8836 : 2015 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014) |
| I.S. EN ISO 11334-1:2007 | ASSISTIVE PRODUCTS FOR WALKING MANIPULATED BY ONE ARM - REQUIREMENTS AND TEST METHODS - PART 1: ELBOW CRUTCHES |
| I.S. EN ISO 9626:2016 | STAINLESS STEEL NEEDLE TUBING FOR THE MANUFACTURE OF MEDICAL DEVICES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 10993-5:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY (ISO 10993-5:2009) |
| UNI EN ISO 10993-18 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 7885:2010-06 | Dentistry - Sterile injection needles for single use (ISO 7885:2010) |
| DIN EN ISO 16744:2004-05 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
| I.S. EN ISO 7439:2015 | COPPER-BEARING CONTRACEPTIVE INTRAUTERINE DEVICES - REQUIREMENTS AND TESTS (ISO 7439:2015) |
| I.S. EN ISO 9394:2012 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - DETERMINATION OF BIOCOMPATIBILITY BY OCULAR STUDY WITH RABBIT EYES (ISO 9394:2012) |
| I.S. EN ISO 6876:2012 | DENTISTRY - ROOT CANAL SEALING MATERIALS (ISO 6876:2012) |
| I.S. EN ISO 8537:2016 | STERILE SINGLE-USE SYRINGES, WITH OR WITHOUT NEEDLE, FOR INSULIN (ISO 8537:2016) |
| I.S. EN ISO 14160:2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 11608-3:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS (ISO 11608-3:2012) |
| I.S. EN ISO 22442-1:2015 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 1: APPLICATION OF RISK MANAGEMENT (ISO 22442-1:2015) |
| I.S. EN ISO 11499:2014 | DENTISTRY - SINGLE-USE CARTRIDGES FOR LOCAL ANAESTHETICS (ISO 11499:2014) |
| I.S. EN 1642:2011 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS |
| I.S. EN ISO 15854:2005 | DENTISTRY - CASTING AND BASEPLATE WAXES |
| I.S. EN ISO 10993-17:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 17: ESTABLISHMENT OF ALLOWABLE LIMITS FOR LEACHABLE SUBSTANCES (ISO 10993-17:2002) |
| I.S. EN ISO 11609:2017 | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| I.S. EN ISO 4074:2015 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
| I.S. EN ISO 9917-1:2007 | DENTISTRY - WATER-BASED CEMENTS - PART 1: POWDER/LIQUID ACID-BASE CEMENTS |
| I.S. EN ISO 10139-2:2016 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 2: MATERIALS FOR LONG-TERM USE (ISO 10139-2:2016) |
| I.S. EN ISO 16408:2015 | DENTISTRY - ORAL CARE PRODUCTS - ORAL RINSES (ISO 16408:2015) |
| I.S. EN ISO 11608-2:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES (ISO 11608-2:2012) |
| I.S. EN ISO 14727:1999 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| I.S. EN ISO 7885:2010 | DENTISTRY - STERILE INJECTION NEEDLES FOR SINGLE USE |
| I.S. EN ISO 10993-3:2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY (ISO 10993-3:2014) |
| I.S. EN ISO 15841:2014 | DENTISTRY - WIRES FOR USE IN ORTHODONTICS (ISO 15841:2014) |
| DIN EN ISO 11499:1999-08 | DENTISTRY - SINGLE-USE CARTRIDGES FOR LOCAL ANAESTHETICS (ISO 11499:2014) |
| I.S. EN ISO 4823:2015 | DENTISTRY - ELASTOMERIC IMPRESSION MATERIALS (ISO/DIS 4823:2013) |
| I.S. EN ISO 24234:2015 | DENTISTRY - DENTAL AMALGAM (ISO 24234:2015) |
| I.S. EN 1641:2009 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - MATERIALS |
| DIN EN ISO 28158:2010-12 | DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
| I.S. EN 12470-2:2000 | CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| EN ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
| I.S. EN ISO 10993-2:2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 2: ANIMAL WELFARE REQUIREMENTS (ISO 10993-2:2006) |
| I.S. EN ISO 10451:2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| I.S. EN ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
| DIN EN ISO 24234:2015-08 | DENTISTRY - DENTAL AMALGAM (ISO 24234:2015) |
| EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| I.S. EN ISO 6877:2006 | DENTISTRY - ROOT-CANAL OBTURATING POINTS |
| I.S. EN ISO 14630:2012 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012) |
| I.S. EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN 1282-2:2005 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| I.S. EN ISO 10993-10:2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION (ISO 10993-10:2010) |
| I.S. EN ISO 6874:2015 | DENTISTRY - POLYMER-BASED PIT AND FISSURE SEALANTS (ISO 6874:2015) |
| I.S. EN ISO 7864:2016 | STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS (ISO/DIS 7864:2014) |
| I.S. EN ISO 22674:2016 | DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES (ISO 22674:2016) |
| I.S. EN ISO 10993-13:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES (ISO 10993-13:2010) |
| I.S. EN ISO 10993-14:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS (ISO 10993-14:2001) |
| I.S. EN ISO 11199-2:2005 | WALKING AIDS MANIPULATED BY BOTH ARMS - REQUIREMENTS AND TEST METHODS - PART 2: ROLLATORS |
| I.S. EN ISO 16672:2015 | OPHTHALMIC IMPLANTS - OCULAR ENDOTAMPONADES (ISO 16672:2015) |
| DIN EN ISO 5366-1:2009-07 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS |
| DIN EN 1733:2003-02 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| UNI EN 1642 : 2012 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS |
| UNI EN ISO 6876 : 2012 | DENTISTRY - ROOT CANAL SEALING MATERIALS |
| BIS IS/ISO 14708-3 : 2008 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 3: IMPLANTABLE NEUROSTIMULATORS |
| VDI 5700 Blatt 2:2017-06 | Reprocessing hazards - Risk management in reprocessing of medical devices - Trainings |
| VDI 3823 Blatt 4:2006-11 | Vacuum coating quality assurance - Testing of vacuum coated plastics |
| OVE/ONORM EN 60601-1 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| DIN EN ISO 1135-3:2017-05 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| UNI EN ISO 11070 : 2015 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES |
| BS ISO 11040-6:2012 | Prefilled syringes Plastic barrels for injectables |
| UNE-EN ISO 5840-2:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| ISO 20697:2018 | Sterile drainage catheters and accessory devices for single use |
| 15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
| DIN EN ISO 8637:2014-03 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1:2013-04-01) |
| 04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 81060-1 : 2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| 16/30339096 DC : 0 | BS EN ISO 7886-3 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 3: AUTO-DISABLE SYRINGES FOR FIXED-DOSE IMMUNIZATION |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| I.S. EN ISO 1562:2004 | DENTISTRY - CASTING GOLD ALLOYS |
| I.S. EN ISO 81060-1:2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007) |
| I.S. EN ISO 12163:2000 | DENTAL BASEPLATE/MODELLING WAX (ISO 12163:1999) |
| 15/30281262 DC : 0 | BS ISO 18666 - TRADITIONAL CHINESE MEDICINE - GENERAL REQUIREMENTS OF MOXIBUSTION DEVICES |
| ISO 10993-16:2017 | Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables |
| I.S. EN 12442-1:2000 | ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 1: ANALYSIS AND MANAGEMENT OF RISK |
| ISO 20126:2012 | Dentistry Manual toothbrushes General requirements and test methods |
| ISO 13019:2018 | Tissue-engineered medical products — Quantification of sulfated glycosaminoglycans (sGAG) for evaluation of chondrogenesis |
| 09/30168905 DC : 0 | BS ISO 28158 - DENTISTRY - INTEGRATED DENTAL FLOSS HOLDERS |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 16/30337378 DC : 0 | BS EN ISO 28319 - DENTISTRY - LASER WELDING |
| 13/30285624 DC : 0 | BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| 07/30164125 DC : 0 | BS ISO 20795-1 - DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS |
| 11/30215841 DC : 0 | BS EN ISO 14457 - DENTISTRY - HAND PIECES AND MOTORS |
| I.S. EN ISO 20795-2:2013 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
| ISO 6877:2006 | Dentistry Root-canal obturating points |
| 17/30361518 DC : 0 | BS ISO 6474-2 - IMPLANTS FOR SURGERY - CERAMIC MATERIALS - PART 2: COMPOSITE MATERIALS BASED ON A HIGH-PURITY ALUMINA MATRIX WITH ZIRCONIA REINFORCEMENT |
| 05/30093244 DC : DRAFT FEB 2005 | EN ISO 11334-1 - WALKING AIDS MANIPULATED BY ONE ARM - REQUIREMENTS AND TEST METHODS - PART 1: ELBOW CRUTCHES |
| ISO 29942:2011 | Prophylactic dams — Requirements and test methods |
| BS EN ISO 10993-4:2017 | Biological evaluation of medical devices Selection of tests for interactions with blood |
| 14/30255135 DC : 0 | BS EN ISO 11607-1:2009/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| I.S. EN ISO 10139-1:2005 | DENTISTRY - SOFT LINING MATERIALS FOR REMOVABLE DENTURES - PART 1: MATERIALS FOR SHORT-TERM USE (ISO 10139-1:2018) |
| I.S. EN ISO 9693-2:2016 | DENTISTRY - COMPATIBILITY TESTING - PART 2: CERAMIC-CERAMIC SYSTEMS (ISO 9693-2:2016) |
| PREN 868-10 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| BS ISO 15675:2009 | Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters |
| BS ISO 7198:1998 | Cardiovascular implants. Tubular vascular prostheses |
| BS ISO 10555-6 : 2015 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS |
| 11/30243462 DC : 0 | BS EN ISO 9394 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - DETERMINATION OF BIOCOMPATIBILITY BY OCULAR STUDY WITH RABBIT EYES |
| ISO 8637-1:2017 | Extracorporeal systems for blood purification — Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators |
| BS ISO 25841:2017 | Female condoms. Requirements and test methods |
| 11/30219230 DC : 0 | BS ISO 13175-3 - IMPLANTS FOR SURGERY - CALCIUM PHOSPHATES - PART 3: HYDROXYAPATITE AND BETA-TRICALCIUM PHOSPHATE BONE SUBSTITUTES |
| 04/30109833 DC : 0 | ISO 8836 - SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| BS EN ISO 7197:2009 | Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components |
| DIN EN ISO 25539-1:2015-07 (Draft) | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017) |
| I.S. EN 12181:1998 | OROPHARYNGEAL AIRWAYS |
| 09/30168911 DC : 0 | BS ISO 28399 - DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
| DIN EN ISO 11607-1:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014) |
| BS EN ISO 9693-1:2012 | Dentistry. Compatibility testing Metal-ceramic systems |
| 11/30227250 DC : 0 | BS EN ISO 21563 - DENTISTRY - HYDROCOLLOID IMPRESSION MATERIALS |
| BS ISO 18190:2016 | Anaesthetic and respiratory equipment. General requirements for airways and related equipment |
| BS EN ISO 81060-1:2012 | Non-invasive sphygmomanometers Requirements and test methods for non-automated measurement type |
| 17/30343686 DC : 0 | BS EN ISO 7405 - DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY |
| DIN EN ISO 26782:2010-02 | Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009 + Cor. 1:2009) (includes Corrigendum AC:2009) |
| BS EN ISO 5364:2016 | Anaesthetic and respiratory equipment. Oropharyngeal airways |
| 17/30319534 DC : 0 | BS ISO 13019 - TISSUE-ENGINEERED MEDICAL PRODUCTS - QUANTIFICATION OF SULPHATED GLYCOSAMINOGLYCANS (SGAG) FOR EVALUATION OF CHONDROGENESIS |
| PREN ISO 11608-2 : DRAFT 2010 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES |
| BS EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products General requirements |
| BS EN ISO 20795-2:2013 | Dentistry. Base polymers Orthodontic base polymers |
| 13/30257549 DC : 0 | BS EN ISO 11499 - DENTISTRY - SINGLE-USE CARTRIDGES FOR LOCAL ANAESTHETICS |
| I.S. EN ISO 3630-5:2011 | DENTISTRY - ENDODONTIC INSTRUMENTS - PART 5: SHAPING AND CLEANING INSTRUMENTS (ISO 3630-5:2011) |
| UNI EN ISO 7494-1 : 2011 | DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 02/561161 DC : DRAFT FEB 2002 | BS EN ISO 16408 - DENTISTRY - ORAL HYGIENE PRODUCTS - ORAL RINSES |
| ISO 8536-14:2016 | Infusion equipment for medical use Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact |
| CAN/CSA-ISO 5364:16 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS |
| UNE-EN ISO 5364:2017 | Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) |
| 02/562119 DC : DRAFT MAY 2002 | BS EN ISO 7376 - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| UNE-EN ISO 16671:2016 | Ophthalmic implants - Irrigating solutions for ophthalmic surgery (ISO 16671:2015) |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 10555-6:2017 | Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015) |
| ANSI/AAMI/ISO 25539-1:2017 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES |
| 14/30263397 DC : 0 | BS EN ISO 22674 - DENTISTRY - METALLIC MATERIALS FOR FIXED AND REMOVABLE RESTORATIONS AND APPLIANCES |
| 17/30336573 DC : 0 | BS EN ISO 20696 - STERILE URETHAL CATHETERS FOR SINGLE USE |
| BS ISO 8536-12 : 2007 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 12: CHECK VALVES |
| ASTM F 2347 : 2015 : REDLINE | Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| 14/30290166 DC : 0 | BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| BS ISO 23409:2011 | Male condoms. Requirements and test methods for condoms made from synthetic materials |
| CSA ISO 11712 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - SUPRALARYNGEAL AIRWAYS AND CONNECTORS |
| BS EN ISO 17254:2016 | Dentistry. Coiled springs for use in orthodontics |
| 09/30207531 DC : 0 | BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
| ISO 18242:2016 | Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 10/30169478 DC : 0 | BS EN ISO 9693-1 - DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS |
| BS EN ISO 7494-1:2011 | Dentistry. Dental units General requirements and test methods |
| 10/30208977 DC : 0 | BS EN ISO 11608-1 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS |
| AAMI ISO 81060-1:2007(R2013) | NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
| ANSI/AAMI/ISO TIR10993-19:2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 19: PHYSICOCHEMICAL, MORPHOLOGICAL, AND TOPOGRAPHICAL CHARACTERIZATION OF MATERIALS |
| AAMI TIR 11 : 2005 | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
| 15/30275221 DC : 0 | BS ISO 18241 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS |
| 16/30346835 DC : 0 | BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS |
| 11/30228364 DC : 0 | BS EN ISO 10555-1 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 17730:2014 | Dentistry. Fluoride varnishes |
| 03/317861 DC : DRAFT OCT 2003 | EN ISO 22523 - EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
| 17/30332217 DC : 0 | BS EN ISO 28158 - DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
| ASTM F 623 : 1999 : EDT 1 | Standard Performance Specification for Foley Catheter |
| CSA Z8836 : 2011 : FR | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| UNI EN ISO 20072 : 2013 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 28158:2010 | DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
| UNI EN ISO 21563 : 2013 | DENTISTRY - HYDROCOLLOID IMPRESSION MATERIALS |
| UNI EN ISO 8836 : 2015 | A SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| CSA ISO 10993-5 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
| UNE-EN ISO 8836:2015 | Suction catheters for use in the respiratory tract (ISO 8836:2014) |
| 08/30178723 DC : DRAFT AUG 2008 | BS ISO 15798 - OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES |
| CSA ISO 8638 : 2012 : R2017 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| BS EN ISO 5840-3:2013 | Cardiovascular implants. Cardiac valve prostheses Heart valve substitutes implanted by transcatheter techniques |
| BS EN ISO 8637:2014 | Cardiovascular implants and extracorporeal systems. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators |
| 03/101659 DC : DRAFT JAN 2003 | ISO 22803 - DENTISTRY - MEMBRANE MATERIALS FOR GUIDED TISSUE REGENERATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 11199-1:1999 | WALKING AIDS MANIPULATED BY BOTH ARMS - REQUIREMENTS AND TEST METHODS - PART 1: WALKING FRAMES |
| CSA ISO 8637 : 2012 : INC : AMD 1 : 2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| ANSI/AAMI/ISO 22442-1:2016 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 1: APPLICATION OF RISK MANAGEMENT |
| CAN/CSA-Z7376:12 (R2017) | Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (Adopted ISO 7376:2009, second edition, 2009-08-15, with Canadian deviations) |
| UNI EN ISO 20795-1 : 2013 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS |
| DIN EN ISO 5840-2:2016-05 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| I.S. EN ISO 28319:2010 | DENTISTRY - LASER WELDING AND FILLER MATERIALS (ISO 28319:2018) |
| CAN/CSA-Z314-18 | Canadian medical device reprocessing |
| ISO 18241:2016 | Cardiovascular implants and extracorporeal systems — Cardiopulmonary bypass systems — Venous bubble traps |
| EN ISO 10873:2010 | Dentistry - Denture adhesives (ISO 10873:2010) |
| ASTM F 2103 : 2011-03 | GUIDE FOR CHARACTERIZATION AND TESTING OF CHITOSAN SALTS AS STARTING MATERIALS INTENDED FOR USE IN BIOMEDICAL AND TISSUE-ENGINEERED MEDICAL PRODUCT APPLICATIONS |
| CSA ISO 10993-9 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| CSA Z17665-2:09 (R2019) | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT) |
| AAMI ISO 10993-10 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| ANSI/AAMI/ISO 10993-6:2016 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| AAMI ISO 10993-7 : 2008 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| I.S. EN ISO 5840-2:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| ANSI/AAMI/ISO 11658:2012 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - BLOOD/TISSUE CONTACT SURFACE MODIFICATIONS FOR EXTRACORPOREAL PERFUSION SYSTEMS |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 10993-14 : 2001 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS |
| ANSI/AAMI/ISO TIR10993-20:2006 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 20: PRINCIPLES AND METHODS FOR IMMUNOTOXICOLOGY TESTING OF MEDICAL DEVICES |
| ANSI/AAMI/ISO 18241:2016 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS |
| ANSI/AAMI/ISO 10993-2:2006(R2014) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 2: ANIMAL WELFARE REQUIREMENTS |
| AAMI ISO 10993-15 : 2000 : R2011 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS |
| AAMI ISO 14708-5 : 2010 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES |
| I.S. EN ISO 8637:2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1 2013-04-01) |
| NF EN ISO 7197 : 2009 | NEUROSURGICAL IMPLANTS - STERILE, SINGLE-USE HYDROCEPHALUS SHUNTS AND COMPONENTS |
| UNE-EN ISO 7494-1:2012 | Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2011) |
| UNI EN ISO 5361 : 2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| BS EN ISO 20126 : 2012 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
| AAMI TIR30:2011(R2016) | A COMPENDIUM OF PROCESSES, MATERIALS, TEST METHODS, AND ACCEPTANCE CRITERIA FOR CLEANING REUSABLE MEDICAL DEVICES |
| ISO 11658:2012 | Cardiovascular implants and extracorporeal systems — Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| ISO 15675:2016 | Cardiovascular implants and artificial organs — Cardiopulmonary bypass systems — Arterial blood line filters |
| ISO 7494-1:2011 | Dentistry Dental units Part 1: General requirements and test methods |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 6872:2015-11 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015) |
| EN ISO 10993-11:2009 | Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2006) |
| I.S. EN ISO 7405:2009 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008) |
| AAMI RD16 : 2007 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HEMODIALYZERS, HEMODIAFILTERS, HEMOFILTERS AND HEMOCONCENTRATORS |
| NF EN ISO 14607 : 2009 | NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS |
| I.S. EN ISO 8638:2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010) |
| I.S. EN ISO 11070:2014 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014) |
| ISO 18562-4:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4: Tests for leachables in condensate |
| ASTM F 2808 : 2017 : REDLINE | Standard Test Method for Performing Behind-the-Knee (BTK) Test for Evaluating Skin Irritation Response to Products and Materials That Come Into Repeated or Extended Contact with Skin |
| ISO 15798:2013 | Ophthalmic implants Ophthalmic viscosurgical devices |
| BS EN ISO 10555-6:2017 | Intravascular catheters. Sterile and single-use catheters Subcutaneous implanted ports |
| DIN EN ISO 4049:2010-03 | DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
| UNI EN ISO 5364 : 2011 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS |
| EN ISO 19023:2018 | Dentistry - Orthodontic anchor screws (ISO 19023:2018) |
| ASTM F 623 : 1999 | Standard Performance Specification for Foley Catheter |
| CSA Z314.10.2 : 2015 | LAUNDERING, MAINTENANCE, AND PREPARATION OF REUSABLE GOWNS, DRAPES, AND WRAPPERS FOR HEALTH CARE SETTINGS AND LAUNDRIES |
| UNI EN ISO 8637 : 2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
| ISO 16840-10:2014 | Wheelchairs Resistance to ignition of non-integrated seat and back support cushions Part 10: Requirements and test methods |
| ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| I.S. EN ISO 7197:2009 | NEUROSURGICAL IMPLANTS - STERILE, SINGLE-USE HYDROCEPHALUS SHUNTS AND COMPONENTS |
| ISO 6872:2015 | Dentistry — Ceramic materials |
| ISO 27020:2010 | Dentistry Brackets and tubes for use in orthodontics |
| EN ISO 10139-1:2018 | Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2018) |
| BS EN ISO 28319:2010 | Dentistry. Laser welding |
| BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| EN ISO 10477:2004 | Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004) |
| ISO 9917-2:2017 | Dentistry — Water-based cements — Part 2: Resin-modified cements |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14971:2012 | Medical devices. Application of risk management to medical devices |
| I.S. EN ISO 16671:2015 | OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY (ISO 16671:2015) |
| I.S. EN ISO 20126:2012 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
| ISO 10555-6:2015 | Intravascular catheters Sterile and single-use catheters Part 6: Subcutaneous implanted ports |
| I.S. EN ISO 8836:2014 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT (ISO 8836:2014) |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| DIN EN ISO 22523:2007-04 | External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006) |
| DIN EN 12470-3:2009-11 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| DIN EN ISO 22794:2009-11 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15) |
| DIN EN 12470-4:2009-11 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| DIN EN ISO 9917-1:2008-01 | DENTISTRY - WATER-BASED CEMENTS - PART 1: POWDER/LIQUID ACID-BASE CEMENTS |
| DIN EN ISO 11199-3:2005-07 | WALKING AIDS MANIPULATED BY BOTH ARMS - REQUIREMENTS AND TEST METHODS - PART 3: WALKING TABLES |
| DIN EN ISO 7439:2015-08 | Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2015) |
| DIN EN ISO 10993-7:2009-02 | Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:2008) |
| ONORM EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 14160:2011) |
| DIN EN 455-3:2015-07 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
| DIN EN ISO 10993-3:2015-02 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY (ISO 10993-3:2014) |
| DIN EN ISO 15841:2014-12 | Dentistry - Wires for use in orthodontics (ISO 15841:2014) |
| DIN EN ISO 11334-1:2007-04 | Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:2007) |
| DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| BS EN 12022:1999 | Blood-gas exchangers |
| ISO 1135-5:2015 | Transfusion equipment for medical use — Part 5: Transfusion sets for single use with pressure infusion apparatus |
| ISO 10271:2011 | Dentistry Corrosion test methods for metallic materials |
| ISO 21606:2007 | Dentistry — Elastomeric auxiliaries for use in orthodontics |
| BS EN ISO 11334-1:2007 | Assistive products for walking manipulated by one arm. Requirements and test methods Elbow crutches |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| ISO 7197:2006 | Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components |
| UNE-EN ISO 10993-3:2015 | Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014) |
| UNI EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| ISO 3630-5:2011 | Dentistry Endodontic instruments Part 5: Shaping and cleaning instruments |
| ISO 10993-3:2014 | Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| UNE-EN ISO 9626:2017 | Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016) |
| BS EN ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices. Requirements and test methods |
| BS EN ISO 10993-18:2009 | Biological evaluation of medical devices Chemical characterization of materials |
| ISO 20795-1:2013 | Dentistry Base polymers Part 1: Denture base polymers |
| UNE-EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| BS EN ISO 23747:2015 | Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
| ISO 15854:2005 | Dentistry Casting and baseplate waxes |
| ISO 5840:2005 | Cardiovascular implants Cardiac valve prostheses |
| BS EN ISO 1135-4:2015 | Transfusion equipment for medical use Transfusion sets for single use, gravity feed |
| BS EN ISO 10993-10:2013 | Biological evaluation of medical devices Tests for irritation and skin sensitization |
| ISO 5364:2016 | Anaesthetic and respiratory equipment — Oropharyngeal airways |
| BS EN 12470-5:2003 | Clinical thermometers Performance of infra-red ear thermometers (with maximum device) |
| ISO 11199-1:1999 | Walking aids manipulated by both arms Requirements and test methods Part 1: Walking frames |
| DIN EN ISO 10993-10:2014-10 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| UNE-EN ISO 6874:2015 | Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2015) |
| ISO 22794:2007 | Dentistry Implantable materials for bone filling and augmentation in oral and maxillofacial surgery Contents of a technical file |
| UNE-EN ISO 7439:2015 | Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2015) |
| DIN EN ISO 10993-15:2009-10 | Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
| ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods |
| UNE-EN ISO 15841:2015 | Dentistry - Wires for use in orthodontics (ISO 15841:2014) |
| DIN EN ISO 10993-17:2009-08 | Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002) |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| UNE-EN ISO 14160:2012 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| ISO 6871-2:1994 | Dental base metal casting alloys Part 2: Nickel-based alloys |
| BS EN 12523:1999 | External limb prostheses and external orthoses. Requirements and test methods |
| BS EN 30-1-2:2012 | Domestic cooking appliances burning gas. Safety Appliances having forced-convection ovens and/or grills |
| UNE-EN ISO 11499:2014 | Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014) |
| I.S. EN ISO 10993-18:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS (ISO 10993-18:2005) |
| EN 868-10:2009 | Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods |
| EN ISO 7376:2009 | Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2009) |
| I.S. EN ISO 10993-7:2008 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS (ISO 10993-7:2008) |
| I.S. EN ISO 7376:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| I.S. EN 868-10:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 10271:2011 | DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
| EN ISO 10993-18:2009 | Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005) |
| UNE-EN 1282-2:2006 | Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified) |
| I.S. EN ISO 11979-5:2006 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 5: BIOCOMPATIBILITY |
| EN ISO 8836:2014 | Suction catheters for use in the respiratory tract (ISO 8836:2014) |
| EN ISO 11979-5:2006 | Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility (ISO 11979-5:2006) |
| EN ISO 17730:2014 | Dentistry - Fluoride varnishes (ISO 17730:2014) |
| EN ISO 10271:2011 | Dentistry - Corrosion test methods for metallic materials (ISO 10271:2011) |
| EN 868-9:2009 | Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods |
| UNE-EN ISO 7885:2010 | Dentistry - Sterile injection needles for single use (ISO 7885:2010) |
| UNE-EN 1782:1998 | TRACHEAL TUBES AND CONNECTORS. |
| EN ISO 3630-5:2011 | Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630-5:2011) |
| EN ISO 25539-2:2012 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
| I.S. EN ISO 10993-9:2009-12 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS (ISO 10993-9:2009) |
| EN ISO 28158:2010 | Dentistry - Integrated dental floss and handles (ISO 28158:2010) |
| EN ISO 3826-4:2015 | Plastics collapsible containers for human blood and blood components - Part 4: Aphaeresis blood bag systems with integrated features (ISO 3826-4:2015) |
| EN ISO 16744:2003 | Dentistry - Base metal materials for fixed dental restorations (ISO 16744:2003) |
| EN ISO 22112:2017 | Dentistry - Artificial teeth for dental prostheses (ISO 22112:2017) |
| EN 1782:1998+A1:2009 | Tracheal tubes and connectors |
| UNI EN 12470-4 : 2009 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| UNI EN ISO 5840 : 2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| UNI EN ISO 10993-10 : 2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| UNI EN ISO 3107 : 2011 | DENTISTRY - ZINC OXIDE/EUGENOL AND ZINC OXIDE/NON-EUGENOL CEMENTS |
| UNI EN ISO 6875 : 2011 | DENTISTRY - PATIENT CHAIR |
| UNI EN 1641 : 2010 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - MATERIALS |
| ONORM EN ISO 15798 : 2013 AMD 1 2018 | OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES (ISO 15798:2013) |
| UNI EN 12470-3 : 2009 | CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE |
| UNI EN ISO 10993-3 : 2015 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| UNI EN ISO 10993-15 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS |
| UNI EN ISO 10451 : 2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN ISO 11609 : 2010 | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
| UNI EN ISO 9917-1 : 2008 | DENTISTRY - WATER-BASED CEMENTS - PART 1: POWDER/LIQUID ACID-BASE CEMENTS |
| UNI EN ISO 10993-14 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 14: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM CERAMICS |
| CSA ISO 10993-11 : 0 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TEST FOR SYSTEMIC TOXICITY |
| UNI EN ISO 10993-13 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES |
| UNI EN 12470-2 : 2009 | CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS |
| UNI EN ISO 5366-1 : 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEOSTOMY TUBES - PART 1: TUBES AND CONNECTORS FOR USE IN ADULTS |
| UNI EN 1282-2 : 2009 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| BS EN ISO 7405 : 2008 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008) |
| UNI EN ISO 11499 : 2014 | DENTISTRY - SINGLE-USE CARTRIDGES FOR LOCAL ANAESTHETICS |
| UNI EN ISO 11608-2 : 2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES |
| ONORM EN ISO 10993-7 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 11608-3 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS |
| UNI EN 12342 : 2009 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| UNI CEI EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| UNI EN ISO 7885 : 2010 | DENTISTRY - STERILE INJECTION NEEDLES FOR SINGLE USE |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 10993-7 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| UNI EN ISO 9394 : 2013 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - DETERMINATION OF BIOCOMPATIBILITY BY OCULAR STUDY WITH RABBIT EYES |
| I.S. EN ISO 21606:2007 | DENTISTRY - ELASTOMERIC AUXILIARIES FOR USE IN ORTHODONTICS |
| UNI EN ISO 14630 : 2013 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| UNI EN ISO 10993-5 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
| UNI EN 1782 : 2009 | TRACHEAL TUBES AND CONNECTORS |
| UNI EN ISO 10993-17 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 17: ESTABLISHMENT OF ALLOWABLE LIMITS FOR LEACHABLE SUBSTANCES |
| DIN EN ISO 20795-1:2013-06 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS (ISO 20795-1:2013) |
| UNE-EN ISO 5361:2017 | Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) |
| AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| DIN EN ISO 9693-2:2016-07 | DENTISTRY - COMPATIBILITY TESTING - PART 2: CERAMIC-CERAMIC SYSTEMS (ISO 9693-2:2016) |
| DIN EN ISO 13504:2012-10 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| DIN EN ISO 16061:2015-09 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| CSA ISO 11607-1 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| ISO 16971:2015 | Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye |
| BS EN ISO 25539-2:2012 | Cardiovascular implants. Endovascular devices Vascular stents |
| BS EN ISO 28399:2011 | Dentistry. Products for external tooth bleaching |
| ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
| BS EN ISO 3630-5:2011 | Dentistry. Endodontic instruments Shaping and cleaning instruments |
| 15/30270433 DC : 0 | BS EN ISO 17254 - DENTISTRY - COILED SPRINGS FOR USE IN ORTHODONTICS |
| EN ISO 17254:2016 | Dentistry - Coiled springs for use in orthodontics (ISO 17254:2016) |
| PREN ISO 14160 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 18190:2016 | Anaesthetic and respiratory equipment — General requirements for airways and related equipment |
| BS ISO 14949:2001 | Implants for surgery. Two-part addition-cure silicone elastomers |
| UNI EN ISO 20795-2 : 2013 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
| 08/30184486 DC : DRAFT JUNE 2008 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 25539-1:2017 | Cardiovascular implants. Endovascular devices Endovascular prostheses |
| I.S. EN ISO 9693-1:2012 | DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS (ISO 9693-1:2012) |
| 08/30192448 DC : DRAFT DEC 2008 | BS ISO 14708-5 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES |
| DIN EN ISO 1135-3:2014-12 (Draft) | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| BS ISO TR 11991:1995 | Guidance on airway management during laser surgery of upper airway |
| 13/30260084 DC : 0 | BS ISO 17256 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - RESPIRATORY THERAPY TUBING AND CONNECTORS |
| DIN EN ISO 28319:2016-06 (Draft) | DENTISTRY - LASER WELDING |
| 10/30168824 DC : 0 | BS EN ISO 6876 - DENTISTRY - ROOT CANAL SEALING MATERIALS |
| BS EN ISO 27020:2010 | Dentistry. Brackets and tubes for use in orthodontics |
| ISO 16038:2017 | Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| BS ISO 11712:2009 | Anaesthetic and respiratory equipment. Supralaryngeal airways and connectors |
| 15/30304642 DC : 0 | BS ISO 11040-8 - PREFILLED SYRINGES - PART 8: REQUIREMENTS AND TEST METHODS FOR FINISHED PRIFILLED SYRINGES |
| UNI EN ISO 13688 : 2013 | PROTECTIVE CLOTHING - GENERAL REQUIREMENTS |
| I.S. EN ISO 5367:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS (ISO 5367:2014) |
| BS ISO 8009:2014 | Mechanical contraceptives. Reusable natural and silicone rubber contraceptive diaphragms. Requirements and tests |
| 11/30243761 DC : 0 | BS ISO 14708-7 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 7: PARTICULAR REQUIREMENTS FOR COCHLEAR IMPLANT SYSTEMS |
| I.S. EN ISO 9333:2006 | DENTISTRY - BRAZING MATERIALS |
| I.S. EN 12011:1998 | INSTRUMENTATION TO BE USED IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| BS EN ISO 13504:2012 | Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment |
| I.S. EN 1819:1998 | LARYNGOSCOPES FOR TRACHEAL INTUBATION - PARTICULAR REQUIREMENTS |
| AAMI ISO TIR 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| BS EN ISO 18397:2016 | Dentistry. Powered scaler |
| BS ISO 6474-2:2012 | Implants for surgery. Ceramic materials Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| ISO 14949:2001 | Implants for surgery — Two-part addition-cure silicone elastomers |
| PREN 455-3 : DRAFT 2013 | MEDICAL GLOVES FOR SINGLE USE - PART 3: REQUIREMENTS AND TESTING FOR BIOLOGICAL EVALUATION |
| 15/30289037 DC : 0 | BS EN ISO 7886-1 - STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 1: SYRINGES FOR MANUAL USE |
| UNE-EN ISO 8536-13:2017 | Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
| 11/30219211 DC : 0 | BS EN ISO 5840-3 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY MINIMALLY INVASIVE TECHNIQUES |
| CEI UNI EN ISO 14971 : 2013 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 13/30283636 DC : 0 | BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA-SPRAYED UNALLOYED TITANIUM COATINGS ON SURGICAL IMPLANTS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 04/30075452 DC : DRAFT FEB 2004 | BS EN ISO 6874 - DENTISTRY - POLYMER-BASED PIT AND FISSURE SEALANTS |
| 14/30295064 DC : 0 | BS EN ISO 16672 - OPHTHALMIC IMPLANTS - OCULAR ENDOTAMPONADES |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| 14/30296389 DC : 0 | BS EN ISO 7864 - STERILE HYPODERMIC NEEDLES FOR SINGLE USE - REQUIREMENTS AND TEST METHODS |
| ISO 19023:2018 | Dentistry — Orthodontic anchor screws |
| 04/30057302 DC : DRAFT DEC 2004 | BS EN ISO 9333 - DENTAL BRAZING MATERIALS |
| 09/30180393 DC : 0 | BS EN ISO 10451 - DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| 14/30281859 DC : 0 | BS ISO 5361 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| AAMI ISO 8637 : 2010 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HEMODIALYZERS, HEMODIAFILTERS, HEMOFILTERS AND HEMOCONCENTRATORS |
| 16/30310674 DC : 0 | BS EN ISO 14457 - DENTISTRY - HANDPIECES AND MOTORS |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| PD ISO/TR 15499:2016 | Biological evaluation of medical devices. Guidance on the conduct of biological evaluation within a risk management process |
| 14/30302761 DC : 0 | BS ISO 11249 - MECHANICAL CONTRACEPTIVES - GUIDANCE FOR CLINICAL EVALUATION OF INTRA-UTERINE CONTRACEPTIVE DEVICES (IUDS) |
| BS EN ISO 10477:2004 | Dentistry. Polymer-based crown and bridge materials |
| 13/30233325 DC : 0 | BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| 02/564513 DC : DRAFT OCT 2002 | BS EN ISO 1135-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE |
| I.S. EN ISO 10477:2004 | DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
| ANSI/AAMI/ISO 11607-1:2006/(R)2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| UNI EN ISO 13504 : 2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| 14/30257546 DC : 0 | BS ISO 17966 - ASSISTIVE PRODUCTS FOR PERSONAL HYGIENE THAT SUPPORT USERS - REQUIREMENTS AND TEST METHODS |
| BS ISO 16038:2017 | Male condoms. Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
| 09/30157765 DC : 0 | BS EN ISO 14160 REV - STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS 7208-17(1998) : 1998 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
| AAMI TIR41 : 2011 | ACTIVE IMPLANTABLE MEDICAL DEVICES - GUIDANCE FOR DESIGNATION OF LEFT VENTRICLE AND IMPLANTABLE CARDIOVERTER DEFIBRILLATOR LEAD CONNECTORS AND PULSE GENERATOR CONNECTOR CAVITIES FOR IMPLANTABLE PACEMAKERS AND IMPLANTABLE CARDIOVERTER DEFIBRILLATORS |
| 15/30266276 DC : 0 | BS ISO 18189 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - CYTOTOXICITY TESTING OF CONTACT LENSES AND CONTACT LENS CARE SOLUTIONS |
| 14/30261590 DC : 0 | BS EN ISO 10993-6 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| DIN ISO 5832-14:2009-12 | IMPLANTS FOR SURGERY - METALLIC MATERIALS - PART 14: WROUGHT TITANIUM 15-MOLYBDENUM 5-ZIRCONIUM 3-ALUMINIUM ALLOY |
| DIN EN ISO 13688:2013-12 | Protective clothing - General requirements (ISO 13688:2013) |
| BS EN ISO 5361:2016 | Anaesthetic and respiratory equipment. Tracheal tubes and connectors |
| BS EN 30993-5:1994 | Biological evaluation of medical devices Tests for cytotoxicity, in vitro methods |
| 15/30278530 DC : 0 | BS ISO 18562-1 - BIOCOMPATIBILITY EVALUATION OF BREATHING GAS PATHWAYS IN HEALTHCARE APPLICATIONS - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| 07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 15854 : 2005 | DENTISTRY - CASTING AND BASEPLATE WAXES |
| EN ISO 11199-1:1999 | Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999) |
| 13/30279967 DC : 0 | BS EN ISO 6872 - DENTISTRY - CERAMIC MATERIALS |
| BS ISO 18189:2016 | Ophthalmic optics. Contact lenses and contact lens care products. Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions |
| 08/30170164 DC : DRAFT AUG 2008 | BS EN ISO 10993-10 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| BS ISO 20308:2017 | Traditional Chinese medicine. Gua Sha instruments |
| 12/30244415 DC : DRAFT APR 2012 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| 13/30263389 DC : 0 | BS EN ISO 4823 - DENTISTRY - ELASTOMERIC IMPRESSION MATERIALS |
| 16/30331653 DC : 0 | BS EN ISO 8637-2 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 2: EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| UNI EN ISO 7197 : 2009 | NEUROSURGICAL IMPLANTS - STERILE, SINGLE-USE HYDROCEPHALUS SHUNTS AND COMPONENTS |
| 16/30319982 DC : 0 | BS ISO 20308 - TRADITIONAL CHINESE MEDICINE - GUA SHA INSTRUMENTS |
| 10/30209603 DC : 0 | BS EN ISO 11608-2 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 2: NEEDLES |
| UNI CEI EN ISO 14971 : 2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| 02/565260 DC : DRAFT DEC 2002 | ISO 8638 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| NF ISO 18562-1 : 2017 | BIOCOMPATIBILITY EVALUATION OF BREATHING GAS PATHWAYS IN HEALTHCARE APPLICATIONS - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
| AAMI ISO 10993-13:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES |
| CSA Z7376 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LARYNGOSCOPES FOR TRACHEAL INTUBATION |
| BS EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants. General requirements |
| 16/30328610 DC : 0 | BS ISO 20749 - DENTISTRY - PRE-CAPSULATED DENTAL AMALGAM |
| AAMI ISO 14708-4 : 2008 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS |
| 17/30357890 DC : 0 | BS ISO 20495 - TRADITIONAL CHINESE MEDICINE - SKIN ELECTRICAL RESISTANCE MEASUREMENT DEVICE |
| ANSI/AAMI/ISO 10993-5:2009(R2014) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
| ANSI/AAMI/ISO 14160:2011(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| UNE-EN ISO 12417-1:2016 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
| ASTM F 1635 : 2016 : REDLINE | Standard Test Method for <emph type="bdit">in vitro</emph> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants |
| UNI EN ISO 25539-2 : 2013 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS |
| ISO 13175-3:2012 | Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 25539-2:2013-05 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
| AAMI ISO 12417-1 : 2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| AAMI ISO 10993-16:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ASTM F 2726 : 2008 | Standard specification for fixation devices for tracheal tubes and other airway devices |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| 15/30278537 DC : 0 | BS ISO 18562-3 - BIOCOMPATIBILITY EVALUATION OF BREATHING GAS PATHWAYS IN HEALTHCARE APPLICATIONS - PART 3: TESTS FOR EMISSIONS OF VOLATILE ORGANIC COMPOUNDS (VOCS) |
| UNE-EN ISO 21563:2014 | Dentistry - Hydrocolloid impression materials (ISO 21563:2013) |
| PREN ISO 20795-1 : DRAFT 2012 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS (ISO/FDIS 20795-1:2012) |
| PREN ISO 20795-2 : DRAFT 2012 | DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO/FDIS 20795-2:2012) |
| UNI EN ISO 27020 : 2011 | DENTISTRY - BRACKETS AND TUBES FOR USE IN ORTHODONTICS |
| AAMI ISO 14971 : 2007 : R2010 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| UNI EN ISO 8638 : 2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| I.S. EN ISO 15798:2013 | OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES (ISO 15798:2013) |
| I.S. EN ISO 13017:2012 | DENTISTRY - MAGNETIC ATTACHMENTS (ISO 13017:2012) |
| ISO 25841:2017 | Female condoms — Requirements and test methods |
| AAMI BE78 : 2002 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND DELAYED TYPE HYPERSENSITIVITY |
| I.S. EN ISO 7494-1:2011 | DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 7886-1:1998 | STERILE HYPODERMIC SYRINGES FOR SINGLE USE - PART 1: SYRINGES FOR MANUAL USE (ISO 7886-1:2017) |
| UNE-EN ISO 20795-1:2013 | Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013) |
| CSA ISO 10993-6 : 1997(R2009) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| UNE-EN ISO 17254:2017 | Dentistry - Coiled springs for use in orthodontics (ISO 17254:2016) |
| UNI EN ISO 9693-1 : 2012 | DENTISTRY - COMPATIBILITY TESTING - PART 1: METAL-CERAMIC SYSTEMS |
| ANSI/AAMI/ISO 10993-9:2009(R2014) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| I.S. EN ISO 25539-1:2017 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017) |
| ANSI/AAMI/ISO TIR16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| AAMI/ISO TIR17665-2:2009(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| I.S. EN ISO 9917-2:2017 | DENTISTRY - WATER-BASED CEMENTS - PART 2: RESIN-MODIFIED CEMENTS (ISO 9917-2:2017) |
| ANSI/AAMI/ISO 14708-1:2014 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| PREN 868-9 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11607-1:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006, INCLUDING AMD 1:2014) |
| ISO 11040-3:2012 | Prefilled syringes — Part 3: Seals for dental local anaesthetic cartridges |
| ISO 6474-2:2012 | Implants for surgery Ceramic materials Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| ISO/TS 16506:2017 | Dentistry — Polymer-based luting materials containing adhesive components |
| ISO 11040-8:2016 | Prefilled syringes — Part 8: Requirements and test methods for finished prefilled syringes |
| PREN ISO 3826-1 : DRAFT 2010 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS |
| ISO 17510:2015 | Medical devices — Sleep apnoea breathing therapy — Masks and application accessories |
| ISO 14708-4:2008 | Implants for surgery Active implantable medical devices Part 4: Implantable infusion pumps |
| BS EN ISO 28158:2010 | Dentistry. Integrated dental floss and handles |
| 17/30359567 DC : 0 | BS EN 14683 - MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 11607-1 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| DIN EN ISO 7405:2013-12 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY (ISO 7405:2008 + AMD. 1:2013) |
| ASTM F 3223 : 2017 | Standard Guide for Characterization and Assessment of Tissue Engineered Medical Products (TEMPs) for Knee Meniscus Surgical Repair and/or Reconstruction |
| EN ISO 28319:2018 | Dentistry - Laser welding and filler materials (ISO 28319:2018) |
| ASTM F 2695 : 2012 : REDLINE | Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications |
| ASTM F 2051 : 2000 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| EN 14683:2014 | Medical face masks - Requirements and test methods |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ISO 1562:2004 | Dentistry Casting gold alloys |
| UNI EN ISO 7405 : 2013 | DENTISTRY - EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY |
| I.S. EN ISO 9693:2000 | METAL-CERAMIC DENTAL RESTORATIVE SYSTEMS |
| ISO 15674:2016 | Cardiovascular implants and artificial organs — Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
| EN ISO 20608:2018 | Dentistry - Powder jet handpieces and powders (ISO 20608:2018) |
| EN ISO 4049:2009 | Dentistry - Polymer-based restorative materials (ISO 4049:2009) |
| ISO/TS 10993-19:2006 | Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials |
| EN ISO 14607:2018 | Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08) |
| UNI EN ISO 28158 : 2010 | DENTISTRY - INTEGRATED DENTAL FLOSS AND HANDLES |
| EN ISO 10993-4:2017 | Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017) |
| ISO/TS 10993-20:2006 | Biological evaluation of medical devices — Part 20: Principles and methods for immunotoxicology testing of medical devices |
| ISO 5366-3:2001 | Anaesthetic and respiratory equipment Tracheostomy tubes Part 3: Paediatric tracheostomy tubes |
| ISO 16840-2:2018 | Wheelchair seating — Part 2: Determination of physical and mechanical characteristics of seat cushions intended to manage tissue integrity |
| ISO 8009:2014 | Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests |
| I.S. EN 14683:2014 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| EN ISO 8637:2014 | Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637:2010, including Amendment 1 2013-04-01) |
| BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| I.S. EN ISO 8536-4:2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010) |
| DIN EN ISO 6877:2006-07 | Dentistry - Root-canal obturating points (ISO 6877:2006) |
| DIN EN ISO 6874:2015-12 | DENTISTRY - POLYMER-BASED PIT AND FISSURE SEALANTS (ISO 6874:2015) |
| BS EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| DIN EN ISO 3107:2011-06 | Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO 3107:2011) |
| UNE-EN ISO 6875:2012 | Dentistry - Patient chair (ISO 6875:2011) |
| DIN EN ISO 10993-9:2010-04 | Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) |
| DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| DIN EN ISO 14630:2013-03 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| DIN EN ISO 8536-4:2013-07 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013) |
| DIN EN ISO 16408:2015-12 | DENTISTRY - ORAL CARE PRODUCTS - ORAL RINSES (ISO 16408:2015) |
| DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| DIN EN ISO 10993-5:2009-10 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
| BS EN ISO 1567:2001 | Dentistry. Denture base polymers |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 10993-14:2009 | Biological evaluation of medical devices Identification and quantification of degradation products from ceramics |
| ISO 13504:2012 | Dentistry — General requirements for instruments and related accessories used in dental implant placement and treatment |
| BS EN ISO 11608-2:2012 | Needle-based injection systems for medical use. Requirements and test methods Needles |
| UNE-EN ISO 1135-4:2016 | Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO 1135-4:2015) |
| BS EN ISO 11979-5:2006 | Ophthalmic implants. Intraocular lenses Biocompatibility |
| BS EN 12181:1998 | Oropharyngeal airways |
| BS EN ISO 9333:2006 | Dentistry. Brazing materials |
| ISO 21563:2013 | Dentistry Hydrocolloid impression materials |
| UNE-EN ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) |
| ISO 10993-13:2010 | Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices |
| BS EN ISO 3107:2011 | Dentistry. Zinc oxide/eugenol cements and zinc oxide/ non-eugenol cements |
| ISO 14727:1998 | Dental implants Prefabricated parts connecting suprastructures to dental implants Contents of technical file |
| BS EN ISO 13716:2000 | Dentistry. Reversible-irreversible hydrocolloid impression material systems |
| BS EN ISO 11199-3:2005 | Walking aids manipulated by both arms. Requirements and test methods Walking tables |
| ISO 11609:2017 | Dentistry — Dentifrices — Requirements, test methods and marking |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| ISO 16744:2003 | Dentistry Base metal materials for fixed dental restorations |
| ISO 1135-3:2016 | Transfusion equipment for medical use Part 3: Blood-taking sets for single use |
| ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
| ISO 10993-2:2006 | Biological evaluation of medical devices — Part 2: Animal welfare requirements |
| ISO 9693-1:2012 | Dentistry Compatibility testing Part 1: Metal-ceramic systems |
| ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components Part 1: Conventional containers |
| ISO 7153-1:2016 | Surgical instruments Materials Part 1: Metals |
| ISO 7376:2009 | Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation |
| EN ISO 28399:2011 | Dentistry - Products for external tooth bleaching (ISO 28399:2011) |
| ISO 16408:2015 | Dentistry — Oral care products — Oral rinses |
| ISO 10993-17:2002 | Biological evaluation of medical devices — Part 17: Establishment of allowable limits for leachable substances |
| BS EN ISO 10993-7:2008 | Biological evaluation of medical devices Ethylene oxide sterilization residuals |
| ISO 7885:2010 | Dentistry Sterile injection needles for single use |
| UNE-EN ISO 7153-1:2017 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| BS EN ISO 10993-2:2006 | Biological evaluation of medical devices Animal welfare requirements |
| BS EN ISO 1562:2004 | Dentistry. Casting gold alloys |
| BS EN 12011:1998 | Instrumentation to be used in association with non-active surgical implants. General requirements |
| BS EN ISO 16408:2015 | Dentistry. Oral care products. Oral rinses |
| BS EN ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components Conventional containers |
| UNE-EN ISO 10139-2:2016 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016) |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 15854:2005 | Dentistry. Casting and baseplate waxes |
| UNE-EN ISO 10271:2012 | Dental metallic materials - Corrosion test methods (ISO 10271:2011) |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| AAMI TIR11:2005(R2015) | SELECTION AND USE OF PROTECTIVE APPAREL AND SURGICAL DRAPES IN HEALTH CARE FACILITIES |
| ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Part 1: Application of risk management |
| BS EN ISO 6871-2:1997 | Dental base metal casting alloys Nickel-based alloys |
| BS EN ISO 12163:2000 | Dental baseplate/modelling wax |
| BS EN ISO 21606:2007 | Dentistry. Elastomeric auxiliaries for use in orthodontics |
| BS EN ISO 11608-3:2012 | Needle-based injection systems for medical use. Requirements and test methods Finished containers |
| ISO 20072:2009 | Aerosol drug delivery device design verification Requirements and test methods |
| BS EN ISO 11199-1:1999 | Walking aids manipulated by both arms. Requirements and test methods Walking frames |
| UNE-EN ISO 4074:2016 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| ISO 8536-13:2016 | Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact |
| ISO 1135-4:2015 | Transfusion equipment for medical use — Part 4: Transfusion sets for single use, gravity feed |
| BS EN ISO 14727:1999 | Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file |
| DIN EN ISO 21606:2007-10 | Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007) |
| UNE-EN 455-3:2015 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
| ISO 15841:2014 | Dentistry Wires for use in orthodontics |
| BS EN ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin |
| UNE-EN ISO 10993-12:2013 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| ISO 5840-3:2013 | Cardiovascular implants Cardiac valve prostheses Part 3: Heart valve substitutes implanted by transcatheter techniques |
| ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
| ISO 10993-14:2001 | Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics |
| 00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO 3826-1:2013) |
| BS EN ISO 11334-4:1999 | Walking aids manipulated by one arm. Requirements and test methods Walking sticks with three or more legs |
| ISO 7864:2016 | Sterile hypodermic needles for single use — Requirements and test methods |
| ISO 17254:2016 | Dentistry — Coiled springs for use in orthodontics |
| BS EN 12470-4 : 2001 | CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| ISO 10139-2:2016 | Dentistry Soft lining materials for removable dentures Part 2: Materials for long-term use |
| ISO 16672:2015 | Ophthalmic implants Ocular endotamponades |
| ISO 10535:2006 | Hoists for the transfer of disabled persons Requirements and test methods |
| ISO 25539-2:2012 | Cardiovascular implants Endovascular devices Part 2: Vascular stents |
| UNE-EN 1642:2012 | Dentistry - Medical devices for dentistry - Dental implants |
| UNE-EN ISO 4049:2010 | Dentistry - Polymer-based restorative materials (ISO 4049:2009) |
| ISO 6874:2015 | Dentistry Polymer-based pit and fissure sealants |
| ISO 22674:2016 | Dentistry — Metallic materials for fixed and removable restorations and appliances |
| BS EN 13503-8:2000 | Ophthalmic implants. Intraocular lenses Fundamental requirements |
| ISO 6875:2011 | Dentistry Patient chair |
| ISO 14534:2011 | Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements |
| BS EN ISO 6877:2006 | Dentistry. Root-canal obturating points |
| UNE-EN ISO 9394:2013 | Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:2012) |
| ISO 11979-5:2006 | Ophthalmic implants Intraocular lenses Part 5: Biocompatibility |
| ISO 22112:2017 | Dentistry — Artificial teeth for dental prostheses |
| DIN EN ISO 10993-13:2010-11 | Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) |
| I.S. EN 455-3:2015 | MEDICAL GLOVES FOR SINGLE USE - PART 3: REQUIREMENTS AND TESTING FOR BIOLOGICAL EVALUATION |
| ISO 5361:2016 | Anaesthetic and respiratory equipment — Tracheal tubes and connectors |
| ISO 6876:2012 | Dentistry — Root canal sealing materials |
| ISO 1567:1999 | Dentistry Denture base polymers |
| ISO 7439:2015 | Copper-bearing contraceptive intrauterine devices — Requirements and tests |
| DIN EN ISO 11608-2:2012-12 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
| ISO 4823:2015 | Dentistry Elastomeric impression materials |
| ISO 9917-1:2007 | Dentistry Water-based cements Part 1: Powder/liquid acid-base cements |
| ISO 24234:2015 | Dentistry Dental amalgam |
| BS EN ISO 11199-2:2005 | Walking aids manipulated by both arms. Requirements and test methods Rollators |
| ISO 23747:2015 | Anaesthetic and respiratory equipment Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
| BS EN ISO 6875:2011 | Dentistry. Patient chair |
| UNE-EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| BS EN ISO 22112:2017 | Dentistry. Artificial teeth for dental prostheses |
| ISO 8536-4:2010 | Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed |
| ISO 11334-4:1999 | Walking aids manipulated by one arm — Requirements and test methods — Part 4: Walking sticks with three or more legs |
| BS EN ISO 24234 : 2004 | DENTISTRY - DENTAL AMALGAM |
| ISO 13017:2012 | Dentistry Magnetic attachments |
| ISO 22523:2006 | External limb prostheses and external orthoses — Requirements and test methods |
| UNE-EN ISO 11070:2015 | Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014) |
| ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin |
| ISO 10993-10:2010 | Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization |
| ISO 20795-2:2013 | Dentistry Base polymers Part 2: Orthodontic base polymers |
| ISO 5840-2:2015 | Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes |
| ISO 11608-1:2014 | Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| ISO 11334-1:2007 | Assistive products for walking manipulated by one arm Requirements and test methods Part 1: Elbow crutches |
| UNE-EN ISO 14630:2013 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| AAMI ISO 10993-4 : 2002 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| UNE-EN 45502-2-3:2010 | Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| BS EN 1282-2 : 2005 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 5840:2009 | Cardiovascular implants. Cardiac valve prostheses |
| BS EN 30993-4:1994 | Biological evaluation of medical devices Selection of tests for interactions with blood |
| BS EN ISO 10451:2010 | Dentistry. Contents of technical file for dental implant systems |
| ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements |
| BS EN ISO 11609:2017 | Dentistry. Dentifrices. Requirements, test methods and marking |
| ISO 10993-5:2009 | Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity |
| ISO 3107:2011 | Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements |
| BS EN ISO 6874:2015 | Dentistry. Polymer-based pit and fissure sealants |
| UNE-EN ISO 10993-9:2010 | Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) |
| BS EN ISO 5366-1:2004 | Anaesthetic and respiratory equipment. Tracheostomy tubes Tubes and connectors for use in adults |
| BS EN ISO 10993-13:2010 | Biological evaluation of medical devices Identification and quantification of degradation products from polymeric medical devices |
| ISO 11499:2014 | Dentistry — Single-use cartridges for local anaesthetics |
| BS EN 30993-3:1994 | Biological evaluation of medical devices Tests for genotoxicity, carcinogenicity and reproductive toxicity |
| UNE-EN ISO 7864:2017 | Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) |
| ISO 4074:2015 | Natural rubber latex male condoms Requirements and test methods |
| BS EN 12180:2000 | Non-active surgical implants. Body contouring implants. Specific requirements for mammary implants |
| ISO 10451:2010 | Dentistry — Contents of technical file for dental implant systems |
| ISO 11608-2:2012 | Needle-based injection systems for medical use Requirements and test methods Part 2: Needles |
| ISO 9693-2:2016 | Dentistry Compatibility testing Part 2: Ceramic-ceramic systems |
| ISO 11608-3:2012 | Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers |
| BS EN ISO 22794:2009 | Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file |
| ISO 11199-3:2005 | Walking aids manipulated by both arms Requirements and test methods Part 3: Walking tables |
| ISO 9333:2006 | Dentistry — Brazing materials |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| BS EN 1641:2004 | Dentistry. Medical devices for dentistry. Materials |
| UNE-EN ISO 10993-13:2010 | Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) |
| ISO 5366-1:2000 | Anaesthetic and respiratory equipment Tracheostomy tubes Part 1: Tubes and connectors for use in adults |
| I.S. EN ISO 10993-15:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS (ISO 10993-15:2000) |
| EN 30-1-2:2012 | Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills |
| EN ISO 10993-2:2006 | Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO 10993-2:2006) |
| EN ISO 1567 : 2000 | DENTISTRY - DENTURE BASE POLYMERS |
| EN ISO 8536-13:2016 | Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
| EN ISO 11199-3:2005 | Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables (ISO 11199-3:2005) |
| EN ISO 20795-1:2013 | Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2013) |
| EN ISO 24234:2015 | Dentistry - Dental amalgam (ISO 24234:2015) |
| EN ISO 10993-6:2016 | Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2016) |
| EN ISO 11334-4:1999 | Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:1999) |
| EN ISO 1135-3:2017 | Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO 1135-3:2016) |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN ISO 3107:2011 | Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO 3107:2011) |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN ISO 6876:2012 | Dentistry - Root canal sealing materials (ISO 6876:2012) |
| EN ISO 5361:2016 | Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) |
| EN 1733 : 2002 | SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT |
| EN ISO 21606:2007 | Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007) |
| EN ISO 10993-10:2013 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| EN ISO 7153-1:2016 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| EN ISO 6874:2015 | Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2015) |
| EN ISO 11608-2:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO 11608-2:2012) |
| EN ISO 10993-15:2009 | Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN ISO 7197:2009 | Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006, including Cor 1:2007) |
| EN ISO 22803:2005 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004) |
| EN ISO 14727:1998/AC:1998 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| EN 12342:1998+A1:2009 | Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| EN ISO 10139-2:2016 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016) |
| EN 1641:2009 | Dentistry - Medical devices for dentistry - Materials |
| UNI CEN ISO/TS 16775 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| EN ISO 11499:2014 | Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2014) |
| EN 45502-2-3:2010 | Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 1642:2011 | Dentistry - Medical devices for dentistry - Dental implants |
| EN ISO 7864:2016 | Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) |
| EN ISO 10993-5:2009 | Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009) |
| EN ISO 10451:2010 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| EN ISO 10993-14:2009 | Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) |
| EN 30993-6 : 1994 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION |
| EN ISO 9333:2006 | Dentistry - Brazing materials (ISO 9333:2006) |
| EN ISO 16408:2015 | Dentistry - Oral care products - Oral rinses (ISO 16408:2015) |
| EN ISO 22794:2009 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15) |
| EN 30993-4 : 1993 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD |
| EN ISO 9693-2:2016 | Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO 9693-2:2016) |
| EN 455-3:2015 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
| EN ISO 10993-3:2014 | Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014) |
| EN ISO 20072:2013 | Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009) |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) |
| EN ISO 9917-2:2017 | Dentistry - Water-based cements - Part 2: Resin-modified cements (ISO 9917-2:2017) |
| EN 12470-4:2000+A1:2009 | Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement |
| EN 30993-3 : 1993 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| EN ISO 9394:2012 | Ophthalmic optics - Contact lenses and contact lens care products - Determination of biocompatibility by ocular study with rabbit eyes (ISO 9394:2012) |
| EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| EN 30993-5 : 1994 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - TESTS FOR CYTOTOXICITY - IN VITRO METHODS |
| EN ISO 9693-1:2012 | Dentistry - Compatibility testing - Part 1: Metal-ceramic systems (ISO 9693-1:2012) |
| EN ISO 14630:2012 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| EN ISO 9917-1:2007 | Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements (ISO 9917-1:2007) |
| EN ISO 1562 : 2004 | DENTISTRY - CASTING GOLD ALLOYS |
| EN ISO 27020:2010 | Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2010) |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| EN ISO 1135-5:2015 | Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015) |
| EN ISO 11608-3:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| EN ISO 11334-1:2007 | Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:2007) |
| EN ISO 20795-2:2013 | Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
| EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
| EN ISO 4074:2015 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
| EN ISO 23747:2015 | Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015) |
| EN ISO 18397:2016 | Dentistry - Powered scaler (ISO 18397:2016) |
| EN 13824:2004 | Sterilization of medical devices - Aseptic processing of liquid medical devices - Requirements |
| EN ISO 5367:2014 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| EN ISO 9626:2016 | Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016) |
| EN ISO 7439:2015 | Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2015) |
| EN ISO 13504:2012 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| EN ISO 10993-13:2010 | Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) |
| EN ISO 7885:2010 | Dentistry - Sterile injection needles for single use (ISO 7885:2010) |
| EN ISO 6875:2011 | Dentistry - Patient chair (ISO 6875:2011) |
| EN ISO 10993-17:2009 | Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002) |
| EN ISO 3826-1:2013 | Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO 3826-1:2013) |
| 08/30156451 DC : DRAFT AUG 2008 | BS EN ISO 10993-13 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES |
| DIN EN ISO 17730:2015-03 | Dentistry - Fluoride varnishes (ISO 17730:2014); German version EN ISO 17730:2014 |
| 12/30210881 DC : DRAFT APR 2012 | BS EN ISO 5367 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS |
| ISO 14708-1:2014 | Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| DIN EN ISO 20072:2013-10 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009) |
| ONORM EN ISO 11070 : 2015 | STERILE SINGLE-USE INTRAVASCULAR INTRODUCERS, DILATORS AND GUIDEWIRES (ISO 11070:2014) |
| DIN EN ISO 18397:2016-09 | DENTISTRY - POWERED SCALER (ISO 18397:2016) |
| DIN EN ISO 5840-3:2013-06 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| CSA ISO 27427 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 8536-12:2007 | Infusion equipment for medical use Part 12: Check valves |
| 01/561789 DC : DRAFT APR 2001 | BS ISO 13960 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - PLASMAFILTERS |
| 04/30105055 DC : DRAFT MAY 2004 | ISO 8600-1 - OPTICS AND OPTICAL INSTRUMENTS - MEDICAL ENDOSCOPES AND ENDOTHERAPY DEVICES - PART 1: GENERAL REQUIREMENTS |
| 02/563797 DC : DRAFT SEP 2002 | BS EN ISO 11199-3 - WALKING AIDS MANIPULATED BY BOTH ARMS - REQUIREMENTS AND TEST METHODS - PART 3: WALKING TABLES |
| PREN 45502-1 : DRAFT 2013 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| 13/30290370 DC : 0 | BS ISO 17510 - MEDICAL DEVICES - SLEEP APNOEA BREATHING THERAPY - MASKS AND APPLICATION ACCESSORIES |
| I.S. EN ISO 25539-2:2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS (ISO 25539-2:2012) |
| 02/121895 DC : DRAFT APR 2002 | BS EN 13060 - SMALL STEAM STERILIZERS |
| 08/30168851 DC : DRAFT JULY 2008 | BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
| 16/30331656 DC : 0 | BS ISO 8637-3 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 3: PLASMAFILTERS |
| ASTM F 1441 : 2003 | Standard Specification for Soft-Tissue Expander Devices |
| BS EN ISO 1135-3:2017 | Transfusion equipment for medical use Blood-taking sets for single use |
| DIN EN ISO 10873:2010-12 | Dentistry - Denture adhesives (ISO 10873:2010) |
| I.S. EN ISO 13504:2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| 10/30203224 DC : 0 | BS ISO 13022 - MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES |
| 15/30316155 DC : 0 | BS ISO 16840-2 - WHEELCHAIR SEATING - PART 2: DETERMINATION OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF DEVICES INTENDED TO MANAGE TISSUE INTEGRITY - SEAT CUSHIONS |
| 10/30233840 DC : 0 | BS ISO 3826-1 - PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS |
| I.S. EN ISO 13688:2013 | PROTECTIVE CLOTHING - GENERAL REQUIREMENTS (ISO 13688:2013) |
| BS ISO 27427:2013 | Anaesthetic and respiratory equipment. Nebulizing systems and components |
| 17/30358658 DC : 0 | BS EN 13795-1 - SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 1: SURGICAL DRAPES AND GOWNS |
| DIN EN ISO 12417-1:2016-02 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
| AAMI ISO 10993-9 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| ANSI/AAMI/ISO 10993-10:2010(R2014) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION |
| UNE-EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| 14/30273278 DC : 0 | BS EN ISO 18397 - DENTISTRY - POWERED SCALER |
| BS EN ISO 10873:2010 | Dentistry. Denture adhesives |
| AAMI ISO 10993-15 : 2000 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 15: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM METALS AND ALLOYS |
| I.S. EN ISO 18397:2016 | DENTISTRY - POWERED SCALER (ISO 18397:2016) |
| BS ISO 20749 : 2017 | DENTISTRY - PRE-CAPSULATED DENTAL AMALGAM |
| 16/30335531 DC : 0 | BS EN ISO 10993-16 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| DD ISO/TS 10993-19:2006 | Biological evaluation of medical devices Physico-chemical, morphological and topographical characterization of materials |
| I.S. EN ISO 10873:2010 | DENTISTRY - DENTURE ADHESIVES |
| PD ISO/TS 16506:2017 | Dentistry. Polymer-based luting materials containing adhesive components |
| BS ISO 29942:2011 | Prophylactic dams. Requirements and test methods |
| 12/30251858 DC : 0 | BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
| 16/30312836 DC : 0 | BS ISO 19227 - CLEANING OF ORTHOPEDIC IMPLANTS - GENERAL REQUIREMENTS |
| PD ISO/TR 37137:2014 | Cardiovascular biological evaluation of medical devices. Guidance for absorbable implants |
| CSA ISO 10993-2 : 1997 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 2: ANIMAL WELFARE REQUIREMENTS |
| DIN EN 14683:2014-07 | MEDICAL FACE MASKS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 3826-4:2015 | Plastics collapsible containers for human blood and blood components Aphaeresis blood bag systems with integrated features |
| ANSI/AAMI BE83:2006(R2011) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 18: CHEMICAL CHARACTERIZATION OF MATERIALS |
| DD CEN ISO/TS 17665-2:2009 | Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1 |
| UNE-EN ISO 27020:2011 | Dentistry - Brackets and tubes for use in orthodontics (ISO 27020:2010) |
| BS EN ISO 9917-2:2017 | Dentistry. Water-based cements Resin-modified cements |
| DIN EN ISO 27020:2011-04 | DENTISTRY - BRACKETS AND TUBES FOR USE IN ORTHODONTICS |
| AAMI ISO 7199 : 2009 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
| 07/30163763 DC : 0 | BS ISO 7405 - DENTISTRY - PRECLINICAL EVALUATION OF BIOCOMPATIBILITY OF MEDICAL DEVICES USED IN DENTISTRY - TEST METHODS FOR DENTAL MATERIALS |
| PREN ISO 11499 : DRAFT 2013 | DENTISTRY - SINGLE-USE CARTRIDGES FOR LOCAL ANAESTHETICS (ISO/DIS 11499:2013) |
| BS ISO 16840-10:2014 | Wheelchairs. Resistance to ignition of non-integrated seat and back support cushions Requirements and test methods |
| 08/30179589 DC : DRAFT MAR 2008 | BS ISO 15674 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS |
| CSA Z8637 : 2008 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| 16/30310949 DC : 0 | BS ISO 5910 - CARDIOVASCULAR IMPLANTS AND EXTRACOPOREAL SYSTEMS - CARDIAC VALVE REPAIR DEVICES |
| CSA ISO 5840 : 0 | CARDIOVASCULAR IMPLANTS - CARIDAC VALVE PROSTHESES |
| 04/30048301 DC : DRAFT MAY 2004 | BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 14/30263393 DC : 0 | BS EN ISO 9693-2 - DENTISTRY - COMPATIBILITY TESTING - PART 2: CERAMIC-CERAMIC SYSTEMS |
| DIN ISO 8536-12:2013-04 | Infusion equipment for medical use - Part 12: Check valves (ISO 8536-12:2007 + Amd. 1:2012) |
| 15/30314236 DC : 0 | BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO) |
| CSA Z17665-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| S.R. CEN ISO TS 17665-2:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| CSA ISO 8638 : 2012 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| 04/19975667 DC : 0 | BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - SINGLE - USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANCE OXYGENATION |
| 07/30162839 DC : 0 | BS EN ISO 10993-9 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| UNI EN ISO 15841 : 2014 | DENTISTRY - WIRES FOR USE IN ORTHODONTICS |
| DIN EN ISO 8836:2015-02 | Suction catheters for use in the respiratory tract (ISO 8836:2014); German version EN ISO 8836:2014 |
| 09/30168805 DC : 0 | BS EN ISO 3107 - DENTISTRY - ZINC OXIDE/EUGENOL CEMENTS AND ZINC OXIDE/NON-EUGENOL CEMENTS |
| 13/30283694 DC : 0 | BS EN ISO 1135-5 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS |
| BS ISO 7197:1997 | Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components |
| 11/30227618 DC : 0 | BS ISO 11658 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - BLOOD/TISSUE CONTACT SURFACE MODIFICATIONS FOR EXTRACORPOREAL PERFUSION SYSTEMS |
| DIN EN ISO 5367:2015-02 | Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
| 08/30168864 DC : DRAFT MAY 2008 | BS ISO 20795-2 - DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
| 15/30283697 DC : 0 | BS EN ISO 8536-13 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 13: GRADUATED FLOW REGULATORS FOR SINGLE USE WITH FLUID CONTACT |
| 07/30167333 DC : DRAFT AUG 2007 | BS EN 868-9 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES FOR USE IN THE MANUFACTURE OF SEALABLE POUCHES, REELS AND LIDS - REQUIREMENTS AND TEST METHODS |
| 02/560790 DC : DRAFT FEB 2002 | BS EN ISO 16671 - OPHTHALMIC IMPLANTS - IRRIGATING SOLUTIONS FOR OPHTHALMIC SURGERY |
| ASTM F 2887 : 2017 : REDLINE | Standard Specification for Total Elbow Prostheses |
| ISO/TS 17137:2014 | Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants |
| DIN EN 868-9:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 3826-4:2015 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 4: APHAERESIS BLOOD BAG SYSTEMS WITH INTEGRATED FEATURES (ISO 3826-4:2015) |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 05/30060678 DC : DRAFT SEP 2005 | BS EN ISO 22794 - DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| EN ISO 10993-12:2012 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| BS EN 14683:2014 | Medical face masks. Requirements and test methods |
| AAMI ISO 10993-16 : 2010 : R2014 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES |
| CSA ISO 5367 : 2014 | BREATHING TUBES INTENDED FOR USE WITH ANAESTHETIC APPARATUS AND VENTILATORS |
| I.S. EN ISO 1135-3:2017 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 3: BLOOD-TAKING SETS FOR SINGLE USE (ISO 1135-3:2016) |
| AAMI ISO TIR 17665-3:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| AAMI ISO 14708-4:2008(R2011) | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS |
| CSA ISO 14971 : 2007 : R2017 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 14971 : 2007 : R2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 8637 : 2012 : INC : AMD 1 : 2015 : R2017 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| UNI EN ISO 4049 : 2009 | DENTISTRY - POLYMER-BASED RESTORATIVE MATERIALS |
| ONORM EN ISO 5840-2 : 2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| I.S. EN ISO 28399:2011 | DENTISTRY - PRODUCTS FOR EXTERNAL TOOTH BLEACHING |
| PREN ISO 11608-1 : DRAFT 2010 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS |
| PREN 13795-2 : DRAFT 2017 | SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 2: CLEAN AIR SUITS |
| BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 11199-2:2005 | Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2005) |
| I.S. EN ISO 20608:2018 | DENTISTRY - POWDER JET HANDPIECES AND POWDERS (ISO 20608:2018) |
| AAMI ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 10993-2 : 2006 : R2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 2: ANIMAL WELFARE REQUIREMENTS |
| ANSI/AAMI/ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| ANSI/AAMI/ISO 18242:2016 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CENTRIFUGAL BLOOD PUMPS |
| I.S. EN ISO 16061:2015 | INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
| I.S. EN ISO 20795-1:2013 | DENTISTRY - BASE POLYMERS - PART 1: DENTURE BASE POLYMERS (ISO 20795-1:2013) |
| DIN EN ISO 10993-11:2015-12 (Draft) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| I.S. EN ISO 19023:2018 | DENTISTRY - ORTHODONTIC ANCHOR SCREWS (ISO 19023:2018) |
| ISO 10555-1:2013 | Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements |
| I.S. EN 45502-2-3:2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| ISO/TR 14283:2018 | Implants for surgery Essential principles of safety and performance |
| I.S. EN ISO 17730:2014 | DENTISTRY - FLUORIDE VARNISHES (ISO 17730:2014) |
| EN ISO 10993-16:2017 | Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2017) |
| ISO 10139-1:2018 | Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use |
| I.S. EN ISO 6872:2015 | DENTISTRY - CERAMIC MATERIALS (ISO 6872:2015) |
| CSA Z5361 : 2003 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| ISO 16671:2015 | Ophthalmic implants — Irrigating solutions for ophthalmic surgery |
| ISO 20749:2017 | Dentistry — Pre-capsulated dental amalgam |
| ISO 16037:2002 | Rubber condoms for clinical trials Measurement of physical properties |
| UNE-EN ISO 9693-2:2016 | Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO 9693-2:2016) |
| ISO 20608:2018 | Dentistry — Powder jet handpieces and powders |
| DIN EN ISO 20126:2012-06 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
| UNE-EN ISO 10993-4:2018 | Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017) |
| ISO 17966:2016 | Assistive products for personal hygiene that support users Requirements and test methods |
| ISO 14708-5:2010 | Implants for surgery Active implantable medical devices Part 5: Circulatory support devices |
| I.S. EN ISO 7199:2017 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016) |
| BIS IS/ISO 5364 : 2008 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - OROPHARYNGEAL AIRWAYS |
| ASTM F 1441 : 2003 : R2009 | Standard Specification for Soft-Tissue Expander Devices |
| UNE-EN ISO 3630-5:2012 | Dentistry - Endodontic instruments - Part 5: Shaping and cleaning instruments (ISO 3630-5:2011) |
| DIN EN ISO 7494-1:2011-11 | DENTISTRY - DENTAL UNITS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS (ISO 7494-1:2011) |
| ASTM F 748 : 2016 : REDLINE | Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices |
| UNI EN ISO 22794 : 2009 | DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| UNI EN ISO 17730 : 2015 | DENTISTRY - FLUORIDE VARNISHES |
| ASTM F 2212 : 2011 : REDLINE | Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs) |
| ASTM F 2051 : 2000 : R2006 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM F 1441 : 2003 : R2014 | Standard Specification for Soft-Tissue Expander Devices |
| CSA ISO 10993-3 : 1997 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 3: TESTS FOR GENOTOXICITY, CARCINOGENICITY AND REPRODUCTIVE TOXICITY |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| ISO 28158:2010 | Dentistry Integrated dental floss and handles |
| ISO 16391:2002 | Aids for ostomy and incontinence Irrigation sets Requirements and test methods |
| EN ISO 14457:2017 | Dentistry - Handpieces and motors (ISO 14457:2017) |
| ISO 8600-1:2015 | Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements |
| ASTM F 2847 : 2017 : REDLINE | Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments |
| NF EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 868-9:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| EN ISO 6877:2006 | Dentistry - Root-canal obturating points (ISO 6877:2006) |
| I.S. EN ISO 20072:2013 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009) |
| I.S. EN ISO 10993-4:2017 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD (ISO 10993-4:2017) |
| ISO 27427:2013 | Anaesthetic and respiratory equipment — Nebulizing systems and components |
| ISO 7886-1:2017 | Sterile hypodermic syringes for single use — Part 1: Syringes for manual use |
| ONORM EN ISO 3826-1 : 2013 | PLASTICS COLLAPSIBLE CONTAINERS FOR HUMAN BLOOD AND BLOOD COMPONENTS - PART 1: CONVENTIONAL CONTAINERS (ISO 3826-1:2013) |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| DIN EN ISO 10535:2007-04 | Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
| DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| DIN EN ISO 10993-6:2009-08 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION (ISO 10993-6:2016) |
| ISO 28399:2011 | Dentistry Products for external tooth bleaching |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 25539-1:2017 | Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 10993-14:2009-08 | Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) |
| UNE-EN ISO 22674:2016 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) |
| BS EN ISO 22674:2016 | Dentistry. Metallic materials for fixed and removable restorations and appliances |
| BS EN ISO 10993-17:2009 | Biological evaluation of medical devices Establishment of allowable limits for leachable substances |
| BS EN ISO 11608-1:2015 | Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems |
| ISO 10873:2010 | Dentistry Denture adhesives |
| BS EN ISO 4823:2015 | Dentistry. Elastomeric impression materials |
| ISO 10993-6:2016 | Biological evaluation of medical devices Part 6: Tests for local effects after implantation |
| ISO 22803:2004 | Dentistry — Membrane materials for guided tissue regeneration in oral and maxillofacial surgery — Contents of a technical file |
| BS EN ISO 15841:2014 | Dentistry. Wires for use in orthodontics |
| EN ISO 7199:2017 | Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO 7199:2016) |
| BS EN ISO 4049:2009 | Dentistry. Polymer-based restorative materials |
| BS EN ISO 16744:2003 | Dentistry. Base metal materials for fixed dental restorations |
| BS EN 1733:2002 | Suction catheters for use in the respiratory tract |
| BS EN 1642:2011 | Dentistry. Medical devices for dentistry. Dental implants |
| ISO 3826-4:2015 | Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features |
| ISO 17730:2014 | Dentistry Fluoride varnishes |
| BS EN ISO 16672:2015 | Ophthalmic implants. Ocular endotamponades |
| ISO 14630:2012 | Non-active surgical implants — General requirements |
| ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
| DIN EN ISO 11608-3:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
| BS EN ISO 4074:2015 | Natural rubber latex male condoms. Requirements and test methods |
| BS EN ISO 9917-1:2007 | Dentistry. Water-based cements Powder/liquid acid-base cements |
| DIN EN ISO 5840:2009-08 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| EN 45502-1 : 2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| EN ISO 81060-1:2012 | Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) |
| DIN EN ISO 4823:2015-12 | Dentistry - Elastomeric impression materials (ISO 4823:2015) |
| UNI EN ISO 10993-9 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| EN ISO 4823:2015 | Dentistry - Elastomeric impression materials (ISO 4823:2015) |
| EN 12470-5:2003 | Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device) |
| ONORM EN ISO 10993-9 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS |
| EN ISO 1135-4 : 2015 COR 2016 | TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 1135-4:2015) |
| DIN EN ISO 10993-11:2009-08 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 11: TESTS FOR SYSTEMIC TOXICITY |
| DIN EN ISO 1562:2004-08 | DENTISTRY - CASTING GOLD ALLOYS |
| EN 12442-1 : 2000 | ANIMAL TISSUES AND THEIR DERIVATIVES UTILIZED IN THE MANUFACTURE OF MEDICAL DEVICES - PART 1: ANALYSIS AND MANAGEMENT OF RISK |
| EN ISO 5840:2009 | Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) |
| DIN EN 13824:2005-02 | STERILIZATION OF MEDICAL DEVICES - ASEPTIC PROCESSING OF LIQUID MEDICAL DEVICES - REQUIREMENTS |
| EN 12523 : 1999 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| EN ISO 10535:2006 | Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| DIN EN ISO 15854:2005-10 | Dentistry - Casting and baseplate waxes (ISO 15854:2005) |
| DIN EN ISO 25539-1:2017-09 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017) |
| DIN EN ISO 10993-6:2017-09 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 6: TESTS FOR LOCAL EFFECTS AFTER IMPLANTATION (ISO 10993-6:2016) |
| EN ISO 10993-7 : 2008 COR 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS (ISO 10993-7:2008/COR 1:2009) |
| DIN EN 1282-2:2009-12 | TRACHEOSTOMY TUBES - PART 2: PAEDIATRIC TUBES |
| I.S. EN ISO 3107:2011 | DENTISTRY - ZINC OXIDE/EUGENOL CEMENTS AND ZINC OXIDE/NONEUGENOL CEMENTS |
| CEN ISO/TS 17665-2:2009 | Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) |
| DIN EN ISO 10993-10:2003-02 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 10: TESTS FOR IRRITATION AND SKIN SENSITIZATION (ISO 10993-10:2010) |
| ONORM EN ISO 10993-17 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 17: ESTABLISHMENT OF ALLOWABLE LIMITS FOR LEACHABLE SUBSTANCES |
| BS 5081-2(1993) : 1993 AMD 9104 | STERILE HYPODERMIC SYRINGES AND NEEDLES - SPECIFICATION FOR STERILE HYPODERMIC NEEDLES FOR SINGLE USE |
| CSA ISO 5361 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| ONORM EN 455-3 : 2015 | MEDICAL GLOVES FOR SINGLE USE - PART 3: REQUIREMENTS AND TESTING FOR BIOLOGICAL EVALUATION |
| CSA Z23747:2008 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS |
| CSA Z23747 : 2008 : R2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS |
| ONORM EN ISO 5367 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - BREATHING SETS AND CONNECTORS (ISO 5367:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.