ISEA 107 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HIGH-VISIBILITY SAFETY APPAREL AND ACCESSORIES
Hardcopy , PDF
02-10-2020
English
01-01-2015
SECTION
1. Scope
2. Purpose
3. Definitions
4. Compliance
5. Types and Classes
6. Design
7. Criteria for Optional Features and Testing
8. Requirements for Background and Combined-Performance
Retroreflective Materials
9. Photometric and Physical Performance Requirements for
Retroreflective and Combined-Performance Materials
10. Test Methods
11. Care Labeling
12. Marking
13. Instructions for Use
APPENDICES
Appendix A - Method of Measuring Wet Performance
of Retroreflective Material
Appendix B - Suggested Type and Class Guidelines
and Scenarios
Appendix C - Examples of Garment Design
Appendix D - Test Reports
Appendix E - Examples of High-Visibility Safety Apparel
Labels
Appendix F - High-Visibility Apparel Service Life
NORMATIVE REFERENCES
Describes performance requirements for high-visibility safety apparel and accessory PPE.
DocumentType |
Standard
|
Pages |
50
|
PublisherName |
Safety Equipment Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
NFPA 1851 : 2014 | SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR STRUCTURAL FIRE FIGHTING AND PROXIMITY FIRE FIGHTING |
NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
NFPA 197 : 2018 | Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting |
NFPA 1999 : 2018 | PROTECTIVE CLOTHING AND ENSEMBLES FOR EMERGENCY MEDICAL OPERATIONS |
NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
ANSI Z245.1 : 2017 | MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT |
ASTM E 2706 : 2018 | Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements |
ANSI/ASSE A10.47 : 2015 | WORK ZONE SAFETY FOR HIGHWAY CONSTRUCTION |
ISO 11393-6:2007 | Protective clothing for users of hand-held chain-saws Part 6: Test methods and performance requirements for upper body protectors |
CSA Z96.1 : 2008 | GUIDELINE ON SELECTION, USE, AND CARE OF HIGH-VISIBILITY SAFETY APPAREL |
CSA Z96 : 2015 | HIGH-VISIBILITY SAFETY APPAREL |
NFPA 1975 : 2014 | EMERGENCY SERVICES WORK CLOTHING ELEMENTS |
NFPA 1951 : 2013 | PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS |
CSA Z96.1 : 2008 : R2013 | GUIDELINE ON SELECTION, USE, AND CARE OF HIGH-VISIBILITY SAFETY APPAREL |
AATCC TM 35 : 2013 | WATER RESISTANCE: RAIN TEST |
AATCCTM107:2013e2:2019 | COLORFASTNESS TO WATER |
ASTM D 3787 : 2016 : REDLINE | Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test |
ASTM D 6797 : 2015 : REDLINE | Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024) |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
AATCC TM 15 : 2013e | COLORFASTNESS TO PERSPIRATION |
ISO 4675:2017 | Rubber- or plastics-coated fabrics — Low-temperature bend test |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
AATCC EP 2 : 2012 | GRAY SCALE FOR STAINING |
AATCC EP 1 : 2012 | GRAY SCALE FOR COLOR CHANGE |
NFPA 1977 : 2016 | PROTECTIVE CLOTHING AND EQUIPMENT FOR WILDLAND FIRE FIGHTING |
ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
ISO 3759:2011 | Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
ASTM F 2733 : 2017 : REDLINE | Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards |
AATCC TM 16-3 : 2014 | COLORFASTNESS TO LIGHT: XENON-ARC |
ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
AATCC TM 158 : 2016E | DIMENSIONAL CHANGES ON DRYCLEANING IN PERCHLOROETHYLENE: MACHINE METHOD |
AATCC TM 135 : 2015 | DIMENSIONAL CHANGES OF FABRICS AFTER HOME LAUNDERING |
ASTM F 1506 : 2017-11 | PERFORMANCE SPECIFICATION FOR FLAME RESISTANT AND ELECTRIC ARC RATED PROTECTIVE CLOTHING WORN BY WORKERS EXPOSED TO FLAMES AND ELECTRIC ARCS |
AATCC TM8-2016e(2022)e | COLORFASTNESS TO CROCKING: CROCKMETER METHOD |
AATCC TM61:2013e2:2019 | COLORFASTNESS TO LAUNDERING: ACCELERATED |
AATCC TM 133 : 2013 | COLORFASTNESS TO HEAT: HOT PRESSING |
NFPA 2112 : 2018 | FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST FLASH FIRE |
ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
AATCC TM 132 : 2013 | COLORFASTNESS TO DRYCLEANING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.