IS 1367 : Part 3 : 2017
Current
The latest, up-to-date edition.
TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS
12-01-2013
NATIONAL FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Designation system for property classes
6 Materials
7 Mechanical and physical properties
8 Applicability of test methods
9 Test methods
10 Marking
Annex A (informative) - Relationship between
tensile strength and elongation after
fracture
Annex B (informative) - Influence of elevated
temperatures on mechanical properties
of fasteners
Annex C (informative) - Elongation after
fracture for full-size fasteners, A[f]
Bibliography
Describes mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 degrees C to 35 degrees C.
| Committee |
PGD 37
|
| DocumentType |
Revision
|
| PublisherName |
Bureau of Indian Standards
|
| Status |
Current
|
| Standards | Relationship |
| ISO 898-1:2013 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| ISO 898-7:1992 | Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 965-4:1998 | ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| ISO 273:1979 | Fasteners — Clearance holes for bolts and screws |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 1891:2009 | Fasteners — Terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.