IEEE C95.1-2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
Available format(s)
PDF
Superseded date
07-08-2021
Superseded by
Language(s)
English
Published date
19-04-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Overview
1.1 Scope
1.2 Purpose
1.3 Introduction
2 References
3 Definitions, acronyms, abbreviations, and letter symbols
3.1 Definitions
3.2 Abbreviations
3.3 Letter symbols for quantities
3.4 Unit symbols
4 Recommendations
4.1 Basic restrictions (BRs) and maximum permissible
exposures (MPEs) for 3 kHz - 5 MHz
4.2 BRs and MPEs for frequencies between 100 kHz and 3 GHz
4.3 BRs for frequencies between 3 GHz and 300 GHz
4.4 MPEs for frequencies between 100 kHz and 300 GHz
4.5 Suggested limit for contact voltage to protect against
RF burns
4.6 Relaxation of the power density MPEs for localized
exposures
4.7 Assessing compliance with this standard
4.8 RF safety programs
Annex A (informative) Approach to revision of IEEE Std C95.1,
1999 Edition
Annex B (informative) Identification of levels of RF
exposure responsible for adverse effects: summary
of the literature
Annex C (informative) Rationale
Annex D (informative) Practical applications - examples
Annex E (informative) Glossary
Annex F (informative) Literature database
Annex G (informative) Bibliography
Presents recommendations to protect against established adverse health effects in human beings associated with exposure to electric, magnetic and electromagnetic fields in the frequency range of 3 kHz to 300 GHz.
| Committee |
International Committee on Electromagnetic Sa
|
| DevelopmentNote |
Supersedes IEEE DRAFT C95.1. (04/2006) Amendment 1 to IEEE C95.1 is available separately, see IEEE C95.1A. (04/2010) Supersedes IEEE C95.1B. (07/2010) This standard was just updated in our system however it was originally released on 04-2006
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-4835-9
|
| Pages |
238
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-HDBK-240 Revision A:2011 | HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE TEST GUIDE |
| 11/30216823 DC : 0 | BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING |
| BS EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| ETR 357 : 20001 | |
| MIL M 81927 : B | MANUAL, TECHNICAL, GENERAL STYLE AND FORMAT OF (WORK PACKAGE CONCEPT) |
| 14/30316021 DC : 0 | BS EN 62657-1 - INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS |
| IEEE 299-2006 | IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures |
| 13/30280457 DC : 0 | BS EN 62493 - ASSESSMENT OF LIGHTING EQUIPMENT RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS |
| CEI EN 50420 : 2007 | BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ) |
| I.S. EN 62232:2017 | DETERMINATION OF RF FIELD STRENGTH, POWER DENSITY AND SAR IN THE VICINITY OF RADIOCOMMUNICATION BASE STATIONS FOR THE PURPOSE OF EVALUATING HUMAN EXPOSURE |
| 04/30118430 DC : DRAFT AUG 2004 | EN 50420 - BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ) |
| IEEE DRAFT 1309 : D2.0 2005 | CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ |
| 11/30216820 DC : 0 | BS ISO 17366 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT PACKAGING |
| ISO 14117:2012 | Active implantable medical devices Electromagnetic compatibility EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices |
| IEEE C95.2-1999 | IEEE Standard for Radio-Frequency Energy and Current-Flow Symbols |
| ISO/IEC TR 20017:2011 | Information technology Radio frequency identification for item management Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators |
| CEI EN 62479 : 2013 | ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ - 300 GHZ) |
| BS EN 62311:2008 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
| 17/30355634 DC : 0 | BS EN 62311 ED.2.0 - ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| IEEE 139-1988 | IEEE Recommended Practice for the Measurement of Radio Frequency Emission from Industrial, Scientific, and Medical (ISM) Equipment Installed on User\'s Premises |
| MIL-STD-3001-1 Revision A:2014 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
| BS EN 62226-1:2005 | Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body General |
| CSA ISO/IEC 18000-2 : 2010 : R2015 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 2: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ |
| IEC 62479:2010 | Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| SAE J 2954 : 2017 | WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY |
| EN 62232:2017 | Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure |
| I.S. EN 61566:1999 | MEASUREMENT OF EXPOSURE TO RADIO-FREQUENCY ELECTROMAGNETIC FIELDS - FIELD STRENGTH IN THE FREQUENCY RANGE 100 KHZ TO 1 GHZ |
| CSA ISO/IEC TR 20017:14 (R2019) | Information technology - Radio frequency identification for item management - Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators (Adopted ISO/IEC TR 20017:2011, first edition, 2011-12-15) |
| TS 102 497 : 1.1.1 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); DECT IN THE 1 920 MHZ TO 1 930 MHZ UNLICENSED PERSONAL COMMUNICATIONS SERVICES (UPCS) FREQUENCY BAND; SPECIFIC REQUIREMENTS |
| IEC 61786-2:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| PD IEC/TS 62996:2017 | Industrial electroheating and electromagnetic processing equipment. Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz |
| EN 62822-2:2016 | Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment |
| EN 61566:1997 | Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz |
| EN 62479:2010 | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| EN 62657-1:2017 | Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations |
| EN 62493:2015 | Assessment of lighting equipment related to human exposure to electromagnetic fields |
| IEEE 1654:2009 | RF PROTECTION OF PERSONNEL WORKING IN THE VICINITY OF WIRELESS COMMUNICATIONS ANTENNAS ATTACHED TO ELECTRIC POWER LINE STRUCTURES |
| TR 101 640 : 7.0.0 | DIGITAL CELLULAR TELECOMMUNICATIONS SYSTEM (PHASE 2+); GSM ELECTRO MAGNETIC COMPATIBILITY (EMC) CONSIDERATIONS |
| BS ISO/IEC 24730-61:2013 | Information technology. Real time locating systems (RTLS) Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface |
| IEC TS 62997:2017 | Industrial electroheating and electromagnetic processing equipment - Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz |
| 11/30216817 DC : 0 | BS ISO 17365 - SUPPLY CHAIN APPLICATIONS OF RFID - TRANSPORT UNITS |
| CSA ISO/IEC 24730-5:14 (R2019) | Information technology - Real-time locating systems (RTLS) - Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface (Adopted ISO/IEC 24730-5:2010, first edition, 2010-04-01) |
| BS ISO/IEC 24730-62:2013 | Information technology. Real time locating systems (RTLS) High rate pulse repetition frequency Ultra Wide Band (UWB) air interface |
| 06/30157890 DC : 0 | BS EN 50496 - DETERMINATION OF WORKERS' EXPOSURE TO ELECTROMAGNETIC FIELDS AND ASSESSMENT OF RISK AT A BROADCAST SITE |
| I.S. EN 62311:2008 | ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| DEFSTAN 05-74/2(2008) : 2008 | GUIDE TO PRACTICAL SAFETY ASPECTS OF THE USE OF RADIO FREQUENCY ENERGY |
| BS IEC 62233:2005 | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| 13/30276624 DC : 0 | BS EN 62704-1 ED 1.0 - RECOMMENDED PRACTICE FOR DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES; 30 MHZ -6 GHZ - PART 1: GENERAL REQUIREMENTS FOR USING THE FINITE DIFFERENCE TIME DOMAIN (FDTD) METHOD SAR CALCULATIONS |
| 12/30260111 DC : 0 | BS ISO/IEC 24730-61 - INFORMATION TECHNOLOGY - REAL-TIME LOCATING SYSTEMS (RTLS) - PART 61: LOW RATE PULSE REPETITION FREQUENCY ULTRA WIDE BAND (UWB) AIR INTERFACE |
| BS EN 45502-2-3:2010 | Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems |
| AAMI ISO 14117 : 2012 | ACTIVE IMPLANTABLE MEDICAL DEVICES - ELECTROMAGNETIC COMPATIBILITY - EMC TEST PROTOCOLS FOR IMPLANTABLE CARDIAC PACEMAKERS, IMPLANTABLE CARDIOVERTER DEFIBRILLATORS AND CARDIAC RESYNCHRONIZATION DEVICES |
| MIL-PRF-32006 Base Document:2004 | PROGRAMMABLE CONTROLLER, NAVAL SHIPBOARD |
| BS EN 50420:2006 | Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz) |
| CSA ISO/IEC 18000-2 : 2010 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 2: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS BELOW 135 KHZ |
| CSA ISO/IEC 18000-7 : 2010 : R2015 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ |
| ISO/TS 10891:2009 | Freight containers — Radio frequency identification (RFID) — Licence plate tag |
| CEI EN 62233 : 2009 | MEASUREMENT METHODS FOR ELECTROMAGNETIC FIELDS OF HOUSEHOLD APPLIANCES AND SIMILAR APPARATUS WITH REGARD TO HUMAN EXPOSURE |
| TR 134 925 : 3.0.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); SPECIFIC ABSORPTION RATE (SAR) REQUIREMENTS AND REGULATIONS IN DIFFERENT REGIONS |
| ISO/IEC/IEEE 8802-15-3:2017 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 15-3: High data rate wireless multi-media networks |
| IEEE 1260-1996 | IEEE Guide on the Prediction, Measurement, and Analysis of AM Broadcast Reradiation by Power Lines |
| ISO/IEC/IEEE 8802-11:2012 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications |
| CEI EN 62226-1 : 2006 | EXPOSURE TO ELECTRIC OR MAGNETIC FIELDS IN THE LOW AND INTERMEDIATE FREQUENCY RANGE - METHODS FOR CALCULATING THE CURRENT DENSITY AND INTERNAL ELECTRIC FIELD INDUCED IN THE HUMAN BODY - PART 1: GENERAL |
| ISO/IEC 24730-61:2013 | Information technology — Real time locating systems (RTLS) — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface |
| ASTM F 3057 : 2016 : REDLINE | Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings |
| IEC TS 62597:2011 | Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure |
| IEC 62822-2:2016 | Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 2: Arc welding equipment |
| EN 62311:2008 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
| IEC 62493:2015 | Assessment of lighting equipment related to human exposure to electromagnetic fields |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| BIS IS/ISO 14708-3 : 2008 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 3: IMPLANTABLE NEUROSTIMULATORS |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| CEI EN 62311 : 2008 | ASSESSMENT OF ELECTRONIC AND ELECTRICAL EQUIPMENT RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| ISO 14708-7:2013 | Implants for surgery Active implantable medical devices Part 7: Particular requirements for cochlear implant systems |
| IEEE 299.1-2013 | IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m |
| 04/300582 DC : DRAFT JAN 2004 | ISO/IEC 8802-11 - INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 11: WIRELESS LAN MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL LAYER (PHY) SPECIFICATIONS |
| IEC 62822-1:2016 | Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) - Part 1: Product family standard |
| BS ISO 17367:2013 | Supply chain applications of RFID. Product tagging |
| SAE J 1113/1 : 2013 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ) |
| BS ISO/IEC 18000-2:2009 | Information technology. Radio frequency identification for item management Parameters for air interface communications below 135 kHz |
| 08/30187614 DC : DRAFT SEP 2008 | BS ISO/IEC 18000-7 - INFORMATION TECHNOLOGY AIDC TECHNIQUES - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - AIR INTERFACE - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ |
| 12/30253654 DC : 0 | BS ISO/IEC 18000-7 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ |
| IEEE DRAFT C95.2 : 1998 | RADIO FREQUENCY ENERGY AND CURRENT FLOW SYMBOLS |
| 08/30176229 DC : DRAFT JAN 2008 | BS EN 62493 - ASSESSMENT OF LIGHTING EQUIPMENT RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS - PRODUCT FAMILY STANDARD |
| BS EN 61566:1998 | Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz |
| BS EN 62233:2008 | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| IEEE 802.15.3-2003 | IEEE Standard for Information technology-- Local and metropolitan area networks-- Specific requirements-- Part 15.3: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for High Rate Wireless Personal Area Networks (WPAN) |
| ISO 17366:2013 | Supply chain applications of RFID — Product packaging |
| IEEE C95.1-2345-2014 | IEEE Standard for Military Workplaces--Force Health Protection Regarding Personnel Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz |
| EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| BS ISO 14117:2012 | Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices |
| ASTM E 1851 : 2015 : REDLINE | Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
| AAMI PC69 : 2007 | |
| ISO/IEC 18000-2:2009 | Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| EIA IS 648 : 1996 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
| ISO/IEC 24730-62:2013 | Information technology — Real time locating systems (RTLS) — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface |
| ISO 17365:2013 | Supply chain applications of RFID — Transport units |
| IEC TR 63167:2018 | Assessment of contact current related to human exposure to electric, magnetic and electromagnetic fields |
| IEC 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| ISO/TR 10305-2:2003 | Road vehicles — Calibration of electromagnetic field strength measuring devices — Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz |
| ISO/IEC 18000-7:2014 | Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
| I.S. EN 62226-1:2005 | EXPOSURE TO ELECTRIC OR MAGNETIC FIELDS IN THE LOW AND INTERMEDIATE FREQUENCY RANGE - METHODS FOR CALCULATING THE CURRENT DENSITY AND INTERNAL ELECTRIC FIELD INDUCED IN THE HUMAN BODY - PART 1: GENERAL |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| NASA STD 3000 VOL 2 : 1995 | MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 2 |
| NASA STD 3001 VOL 2 : 2015 | NASA SPACE FLIGHT HUMAN-SYSTEM STANDARD - VOLUME 2: HUMAN FACTORS, HABITABILITY, AND ENVIRONMENTAL HEALTH |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| UNI CEI EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| IEEE DRAFT 802.11MA : D7.0 2006 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 11: WIRELESS LAN MEDIUM ACCESS CONTROL (MAC) AND PHYSICAL LAYER (PHY) SPECIFICATIONS |
| MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
| BS IEC 62232:2011 | Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure |
| 13/30270144 DC : 0 | BS EN 62822-1 - PRODUCT FAMILY STANDARD FOR THE ASSESSMENT OF EQUIPMENT FOR RESISTANCE WELDING, ARC WELDING PROCESSES RELATED TO HUMAN EXPOSURE RESTRICTIONS FOR ELECTOMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| PD IEC/TS 62997:2017 | Industrial electroheating and electromagnetic processing equipment. Evaluation of hazards caused by magnetic nearfields from 1 Hz to 6 MHz |
| MIL-STD-462 Revision D:1993 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
| BS ISO/IEC 24730-5:2010 | Information technology. Real-time locating systems (RTLS) Chirp spread spectrum (CSS) at 2,4 GHz air interface |
| BS ISO 17365:2013 | Supply chain applications of RFID. Transport units |
| 10/30208719 DC : 0 | |
| BS EN 62232:2017 | Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure (IEC 62232:2017) |
| BS IEC 61786-2:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Basic standard for measurements |
| BS ISO 17366:2013 | Supply chain applications of RFID. Product packaging |
| BS EN 62479:2010 | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| IEC/IEEE 62704-1:2017 | Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 1: General requirements for using the finite difference time-domain (FDTD) method for SAR calculations |
| AAMI ISO 14708-4 : 2008 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS |
| CSA ISO/IEC 18000-7 : 2010 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 7: PARAMETERS FOR ACTIVE AIR INTERFACE COMMUNICATIONS AT 433 MHZ |
| UNE-EN 62493:2015 | Assessment of lighting equipment related to human exposure to electromagnetic Field |
| ANSI C95.5 : 1981 | RF AND MICROWAVE ELECTROMAGNETIC FIELDS, RECOMMENDED PRACTICE FOR MEASUREMENT OF HAZARDOUS, |
| I.S. EN 62233:2008 | MEASUREMENT METHODS FOR ELECTROMAGNETIC FIELDS OF HOUSEHOLD APPLIANCES AND SIMILAR APPARATUS WITH REGARD TO HUMAN EXPOSURE |
| IEEE 475-2000 | IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz |
| I.S. EN 62822-2:2016 | ELECTRIC WELDING EQUIPMENT - ASSESSMENT OF RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (0 HZ TO 300 GHZ) - PART 2: ARC WELDING EQUIPMENT |
| ISO 14708-4:2008 | Implants for surgery Active implantable medical devices Part 4: Implantable infusion pumps |
| ISO/IEC 8802-11:2005 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications |
| I.S. EN 62209-1:2016 | MEASUREMENT PROCEDURE FOR THE ASSESSMENT OF SPECIFIC ABSORPTION RATE OF HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - PART 1: DEVICE USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
| ASTM F 3020 : 2016 | Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security |
| ISO 17364:2013 | Supply chain applications of RFID — Returnable transport items (RTIs) and returnable packaging items (RPIs) |
| ISO 17367:2013 | Supply chain applications of RFID — Product tagging |
| IEC TR 62905:2018 | Exposure assessment methods for wireless power transfer systems |
| IEC 62232:2017 | Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure |
| IEC 62311:2007 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
| IEC 62657-1:2017 | Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| IEC TS 62996:2017 | Industrial electroheating and electromagnetic processing equipment - Requirements on touch currents, voltages and electric fields from 1 kHz to 6 MHz |
| UNE-EN 45502-2-3:2010 | Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| EN 45502-2-3:2010 | Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
| IEEE C95.7-2014 | IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz |
| IEEE DRAFT C63.19 : 2005 | METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS |
| ECMA/TR 97 : 1ED 2009 | GUIDE FOR ASSESSMENT OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM MULTIMEDIA PRODUCTS IN ACCORDANCE WITH IEC/EN 62311 |
| I.S. EN 62479:2010 | ASSESSMENT OF THE COMPLIANCE OF LOW POWER ELECTRONIC AND ELECTRICAL EQUIPMENT WITH THE BASIC RESTRICTIONS RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (10 MHZ TO 300 GHZ) |
| UNE-EN 62479:2011 | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| CEI EN 61566 : 1998 | MEASUREMENT OF EXPOSURE TO RADIO-FREQUENCY ELECTROMAGNETIC FIELDS FIELD STRENGTH IN THE FREQUENCY RANGE 100 KHZ TO 1 GHZ |
| BS EN 62822-2:2016 | Electric welding equipment. Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 GHz) Arc welding equipment |
| 12/30260114 DC : 0 | BS ISO/IEC 24730-62 - INFORMATION TECHNOLOGY - REAL-TIME LOCATING SYSTEMS (RTLS) - PART 62: HIGH RATE PULSE REPETITION FREQUENCY ULTRA WIDE BAND (UWB) AIR INTERFACE |
| PD IEC/TS 62657-1:2014 | Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations |
| BS ISO 17364:2013 | Supply chain applications of RFID. Returnable transport items (RTIs) and returnable packaging items (RPIs) |
| BS EN 62493:2015 | Assessment of lighting equipment related to human exposure to electromagnetic field |
| IEC 62233:2005 | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| IEEE C95.2-1999 | RADIO-FREQUENCY ENERGY AND CURRENT-FLOW SYMBOLS |
| 14/30270135 DC : 0 | BS EN 62822-2 ED1.0 - ASSESSMENT OF ELECTRIC WELDING EQUIPMENT RELATED TO RESTRICTIONS OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS (0 HZ 300 GHZ) - PART 2: BASIC STANDARD FOR ARC WELDING |
| 11/30216814 DC : 0 | BS ISO 17364 - SUPPLY CHAIN APPLICATIONS OF RFID - RETURNABLE TRANSPORT ITEMS (RTIS) |
| BS ISO/IEC 18000-7:2014 | Information technology. Radio frequency identification for item management Parameters for active air interface communications at 433 MHz |
| AAMI ISO 14708-4:2008(R2011) | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 4: IMPLANTABLE INFUSION PUMPS |
| CEI 211-7 : 2001 | GUIDE FOR THE MEASUREMENT AND THE EVALUATION OF ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE 10 KHZ - 300 GHZ, WITH REFERENCE TO THE HUMAN EXPOSURE |
| ANEP-45 : 0 | |
| IEEE 1528-2013 REDLINE | IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
| SAE J1113/4 : 2014 | IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - BULK CURRENT INJECTION (BCI) METHOD |
| IEEE C95.3-2002 | IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
| BS EN 62657-1:2017 | Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations |
| IEEE 1560-2005 | IEEE Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz |
| ANSI/ASSE A10.48 : 2016 | CRITERIA FOR SAFETY PRACTICES WITH THE CONSTRUCTION, DEMOLITION, MODIFICATION AND MAINTENANCE OF COMMUNICATION STRUCTURES |
| I.S. EN 62657-1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS |
| I.S. EN 45502-2-3:2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
| ISO/IEC 24730-5:2010 | Information technology — Real-time locating systems (RTLS) — Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface |
| I.S. EN 50420:2006 | BASIC STANDARD FOR THE EVALUATION OF HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS FROM A STAND ALONE BROADCAST TRANSMITTER (30 MHZ - 40 GHZ) |
| AAS3P-10 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS |
| IEEE DRAFT 299 : 0 | METHOD FOR MEASURING THE EFFECTIVENESS OF ELECTROMAGNETIC SHIELDING ENCLOSURES |
| I.S. EN 62493:2015 | ASSESSMENT OF LIGHTING EQUIPMENT RELATED TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS |
| ASTM F 3278 : 2017 | Standard Performance Specification for Hand-Held Metal Detectors Used in Safety and Security |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| IEC/IEEE 62704-3:2017 | Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 3: Specific requirements for using the finite difference time domain (FDTD) method for SAR calculations of mobile phones |
| IEC 62226-1:2004 | Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General |
| EN 62226-1:2005 | Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General |
| EN 62233:2008/corrigendum Aug. 2008 | MEASUREMENT METHODS FOR ELECTROMAGNETIC FIELDS OF HOUSEHOLD APPLIANCES AND SIMILAR APPARATUS WITH REGARD TO HUMAN EXPOSURE |
| EN 50420:2006 | Basic standard for the evaluation of human exposure to electromagnetic fields from a stand alone broadcast transmitter (30 MHz - 40 GHz) |
| IEEE 1688-2015 | IEEE Standard Requirements for the Control of Electromagnetic Interference Characteristics of Replaceable Electronic Modules |
| IEEE 802.11-2012 | IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
| IEEE C63.19-2007 | American National Standard Methods of Measurement for Hearing Aid Compatibility with Wireless Communications |
| IEEE C95.7-2005 | IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz |
| AAMI PC69 : 2007 | |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| IEEE C95.7-2014 | IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
| IEEE C95.3-2002 | IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| ANSI Z136.1 : 2014 | SAFE USE OF LASERS |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| EN 50383 : 2010 COR 2013 | BASIC STANDARD FOR THE CALCULATION AND MEASUREMENT OF ELECTROMAGNETIC FIELD STRENGTH AND SAR RELATED TO HUMAN EXPOSURE FROM RADIO BASE STATIONS AND FIXED TERMINAL STATIONS FOR WIRELESS TELECOMMUNICATION SYSTEMS (110 MHZ - 40 GHZ) |
| CFR 47(PTS20-39) : OCT 2017 | TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION |
| IEEE C95.6-2002 | IEEE Standard for Safety Levels With Respect to Human Exposure to Electromagnetic Fields, 0-3 kHz |
| IEEE C95.7-2005 | IEEE Recommended Practice for Radio Frequency Safety Programs, 3 kHz to 300 GHz |
| ASHRAE 55 : 2017 | THERMAL ENVIRONMENTAL CONDITIONS FOR HUMAN OCCUPANCY |
| CFR 47(PTS80-END) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.