IEEE C57.152-2013
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors
Hardcopy , PDF
21-03-2024
English
21-06-2013
1. Scope
2. Normative references
3. Definitions
4. Purpose of tests
5. Maintenance tests and information
6. Safety
7. Tests and test techniques
8. Diagnostic chart
Annex A (informative) - Power factor measurements
Annex B (informative) - Bushings
Annex C (informative) - Infrared temperature measurements
Annex D (informative) - Dew point test
Annex E (informative) - Furan testing
Annex F (informative) - Frequency response testing
Annex G (informative) - Dielectric frequency response
Annex H (informative) - Other methods to verify polarity
from previous field test guide revisions
Annex I (informative) - Particle count
Annex J (informative) - Bibliography
Specifies diagnostic field tests and measurements that are performed on fluid-filled power transformers and regulators.
Committee |
Transformers
|
DocumentType |
Standard
|
ISBN |
978-0-7381-8369-5
|
Pages |
121
|
PublisherName |
Institute of Electrical & Electronics Engineers
|
Status |
Withdrawn
|
17/30331680 DC : 0 | BS ISO 18095 - CONDITION MONITORING AND DIAGNOSTICS OF POWER TRANSFORMERS |
IEEE C57.140-2006 | IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers |
IEEE C57.125-2015 | IEEE Guide for Failure Investigation, Documentation, Analysis, and Reporting for Power Transformers and Shunt Reactors |
IEEE C57.150-2023 | IEEE Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher |
IEEE C57.147-2018 | IEEE Guide for Acceptance and Maintenance of Natural Ester Insulating Liquid in Transformers |
IEEE C57.104-2019 | IEEE Guide for the Interpretation of Gases Generated in Mineral Oil-Immersed Transformers |
IEEE C57.140-2017 | IEEE Guide for Evaluation and Reconditioning of Liquid Immersed Power Transformers |
IEEE C57.161-2018 | IEEE Guide for Dielectric Frequency Response Test |
IEEE C57.12.200-2022 | IEEE Guide for the Dielectric Frequency Response Measurement of Bushings |
IEEE C57.19.100-2012 REDLINE | IEEE Guide for Application of Power Apparatus Bushings |
ISO 3772:2000 | Photography Rolls of sensitized material for the pre-press industry Dimensions and related requirements |
IEEE 62-1995 | IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
ASTM D 1816 : 2012 : REDLINE | Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes |
NEMA 107:2016 | Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus |
ASTM D 924 : 2015 : REDLINE | Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids |
IEC 60599:2015 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
IEEE C57.93-2007 | IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers |
IEEE C57.149-2012 | IEEE Guide for the Application and Interpretation of Frequency Response Analysis for Oil-Immersed Transformers |
IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
IEEE C57.91-2011 REDLINE | IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
IEEE C57.12.80-2010 | IEEE Standard Terminology for Power and Distribution Transformers |
IEEE 510-1983 | IEEE Recommended Practices for Safety in High-Voltage and High-Power Testing |
IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
ASTM D 1275 : 2015 | Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
ASTM D 1533 : 2012 : REDLINE | Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
IEEE C57.139-2010 | IEEE Guide for Dissolved Gas Analysis in Transformer Load Tap Changers |
IEEE C57.140-2006 | IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers |
IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
IEEE C57.143-2012 | IEEE Guide for Application for Monitoring Equipment to Liquid-Immersed Transformers and Components |
NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
IEEE C57.111 : 1989 | GUIDE FOR ACCEPTANCE OF SILICONE INSULATING FLUID AND ITS MAINTENANCE IN TRANSFORMERS |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
IEEE C57.150-2012 | IEEE Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher |
ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
ASTM D 1524 : 2015 : REDLINE | Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field |
ASTM D 5837 : 2015 : REDLINE | Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC) |
ASTM D 923 : 2015 : REDLINE | Standard Practices for Sampling Electrical Insulating Liquids |
ASTM D 6786 : 2015 : REDLINE | Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters |
IEEE C57.147-2008 | IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers |
ISO 4402:1991 | Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant |
IEEE C57.106-2006 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.