IEEE C37.10-2011 REDLINE
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
Available format(s)
Hardcopy , PDF
Withdrawn date
24-03-2022
Language(s)
English
Published date
30-12-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. Overview
2. Normative references
3. Definitions
4. Procedure for investigation of circuit breaker
failures
5. Diagnostic tests and advanced diagnostics
6. Data collection and data structure
7. Failure report utilization
Annex A (informative) - Failure reporting for power
circuit breakers
Annex B (informative) - Bibliography
Annex C (informative) - Circuit breaker design and
construction
This guide provides practices and processes to perform, analyze, and report failure investigations of power circuit breakers.
| Committee |
Switchgear
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-7144-9
|
| Pages |
156
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| Supersedes |
| BS IEC/IEEE 62271-37-013:2015 | High-voltage switchgear and controlgear Alternating-current generator circuit-breakers |
| 14/30257408 DC : 0 | BS IEC/IEEE 62271-37-013 ED 1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 37-013: ALTERNATING-CURRENT GENERATOR CIRCUIT-BREAKERS |
| IEEE C37.10.1-2000 | IEEE Guide for the Selection of Monitoring for Circuit Breakers |
| IEEE DRAFT C37.10-1 : D4.0 JULY 2000 | DRAFT GUIDE FOR THE SELECTION OF MONITORING FOR CIRCUIT BREAKERS |
| IEEE 1624 : 2008 | ORGANIZATIONAL RELIABILITY CAPABILITY |
| IEEE DRAFT 1010 : D10 2005 | GUIDE FOR CONTROL OF HYDROELECTRIC POWER PLANTS |
| IEEE C37.12.1-2018 | IEEE Recommended Practice for Instruction Manual Content of AC High-Voltage Circuit Breakers above 1000 V |
| IEEE C37.10.1-2018 | IEEE Guide for the Selection of Monitoring for Circuit Breakers |
| IEEE C37.012-2022 | IEEE Guide for the Application of Capacitive Current Switching for AC High-Voltage Circuit Breakers Above 1000 V |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| IEC 60480:2004 | Guidelines for the checking and treatment of sulfur hexafluoride (SF<sub>6</sub>) taken from electrical equipment and specification for its re-use |
| IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
| IEEE C37.14-2015 | IEEE Standard for DC (3200 V and below) Power Circuit Breakers Used in Enclosures |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| IEC 62271-200:2011 | High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| IEEE C37.013-1997 | IEEE Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis |
| IEC 62271-110:2017 | High-voltage switchgear and controlgear - Part 110: Inductive load switching |
| IEEE C37.13-2008 REDLINE | IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| IEC 62271-202:2014 | High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation |
| IEEE C37.20.6-2015 REDLINE | IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| IEC 62271-201:2014 | High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEEE C37.012-2005 | IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers |
| IEEE C37.20.2-2015 | IEEE Standard for Metal-Clad Switchgear |
| IEC TR 62271-300:2006 | High-voltage switchgear and controlgear - Part 300: Seismic qualification of alternating current circuit-breakers |
| IEC 60056:1987 | High-voltage alternating-current circuit-breakers |
| IEEE 493 : 2007 | DESIGN OF RELIABLE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| IEC 60376:2005 | Specification of technical grade sulfur hexafluoride (SF<sub>6</sub>) for use in electrical equipment |
| NFPA 907M : 1988 | MANUAL FOR THE DETERMINATION OF ELECTRICAL FIRE CAUSES |
| IEEE C37.59-2007 | IEEE Standard Requirements for Conversion of Power Switchgear Equipment |
| IEC TS 62271-304:2008 | High-voltage switchgear and controlgear - Part 304: Design classes for indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and includuing 52 kV to be used in severe climatic conditions |
| IEC 62271-3:2015 | High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 |
| ANSI C37.6 : 1971 | SCHEDULE OF PREFERRED RATINGS FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A TOTAL CURRENT BASIS |
| IEC 61958:2000 | High-voltage prefabricated switchgear and controlgear assemblies - Voltage presence indicating systems |
| IEC TR 62063:1999 | High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear |
| IEEE C37.11-1997 | IEEE Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE C37.010-1999 | IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEEE C37.13-2015 | IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
| IEEE C37.11-2014 | IEEE Standard Requirements for Electrical Control for AC High-Voltage (>1000 V) Circuit Breakers |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| CSA Q634 : M91 | RISK ANALYSIS REQUIREMENTS & GUIDELINES |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| IEEE C37.011-2011 REDLINE | IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers |
| ANSI C37.7 : 1960 | INTERRUPTING RATING FACTORS FOR RECLOSING SERVICE |
| IEEE C37.09-1999 | IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
| IEC 60056-4A:1974 | Supplement A - High-voltage alternating-current circuit-breakers - Part 4: Type tests and routine tests - Appendix E: Methods of determining prospective transient recovery voltage waves |
| IEEE C37.012-2014 | IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V |
| IEEE C37.20.7-2007 REDLINE | IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults |
| IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| IEEE C57.117-1986 | IEEE Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems |
| IEEE C57.125-2015 | IEEE Guide for Failure Investigation, Documentation, Analysis, and Reporting for Power Transformers and Shunt Reactors |
| IEEE C37.015-2009 | IEEE Guide for the Application of Shunt Reactor Switching |
| IEC TR 62271-303:2008 | High-voltage switchgear and controlgear - Part 303: Use and handling of sulphur hexafluoride (SF<sub>6</sub>) |
| IEC TR 62271-305:2009 | High-voltage switchgear and controlgear - Part 305: Capacitive current switching capability of air-insulated disconnectors for rated voltages above 52 kV |
| IEC TR 62271-310:2008 | High-voltage switchgear and controlgear - Part 310: Electrical endurance testing for circuit-breakers above a rated voltage of 52 kV |
| IEEE 1584-2002 | IEEE Guide for Performing Arc Flash Hazard Calculations |
| IEEE C37.12-2008 REDLINE | IEEE Guide for Specifications of High-Voltage Circuit Breakers (over 1000 Volts) |
| IEEE/ANSI C37.06.1-2000 | American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated - Definite Purpose for Fast Transient Recovery Voltage Rise Times |
| ANSI C37.9 : A70 | TEST CD/AC HI-VOLTAGE CB RATED TOTAL CURRENT BASIS |
| IEEE C37.14-2002 | IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures |
| IEEE 1332-2012 | IEEE Standard Reliability Program for the Development and Production of Electronic Products |
| IEEE C37.04-1999 | IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers |
| IEEE C37.016-2006 | IEEE Standard for AC High Voltage Circuit Switchers rated 15.5kV through 245kV |
| IEEE C37.06-2009 | IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V |
| IEEE C37.101-2006 REDLINE | IEEE Guide for Generator Ground Protection |
| IEEE C37.100-1992 | IEEE Standard Definitions for Power Switchgear |
| NFPA 422M : 1989 | AIRCRAFT FIRE AND EXPLOSION INVESTIGATORS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.