• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IEEE/ANSI N42.34-2006

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by

American National Standard Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides

Available format(s)

PDF

Withdrawn date

30-03-2023

Superseded by

IEEE/ANSI N42.34-2015

Language(s)

English

Published date

22-01-2007

£53.90
Excluding VAT

1 Overview
   1.1 Scope
   1.2 Purpose
2 Normative references
3 Definitions
4 General considerations
   4.1 Standard test conditions
   4.2 Units and uncertainties
   4.3 Special word usage
5 General characteristics
   5.1 General
   5.2 Test preparation
   5.3 Operating modes
   5.4 Markings
   5.5 Communication interface
   5.6 User interface
   5.7 Warm-up time
   5.8 Battery power
   5.9 Effective range of measurement
   5.10 Spectral identification
   5.11 Personnel protection alarm
   5.12 Explosive atmospheres
6 Radiological tests
   6.1 General test information
   6.2 Response time
   6.3 Gamma-ray exposure rate indication
   6.4 Alarms
   6.5 Radionuclide identification
   6.6 Single radionuclide
   6.7 Simultaneous radionuclide identification
   6.8 Interfering ionizing radiation (gamma-rays)
   6.9 Interfering ionizing radiation (beta)
   6.10 False identification
   6.11 Interference from surrounding material
   6.12 Variation of identification based on angle of incidence
   6.13 Neutron response
   6.14 Over-range characteristics for identification
   6.15 Determination of full-energy-peak efficiency
   6.16 Determination of full width-half maximum (FWHM)
   6.17 Over-range characteristics for exposure rate indication
   6.18 Neutron indication in the presence of photons
7 Environmental performance requirements
   7.1 Ambient temperature influence
   7.2 Temperature shock
   7.3 Relative humidity (RH)
   7.4 Moisture and dust protection
   7.5 Cold temperature start up
8 Electromagnetic performance requirements
   8.1 Electrostatic discharge (ESD)
   8.2 Radio frequency (RF) susceptibility
   8.3 Radiated emissions
   8.4 Conducted immunity
   8.5 Magnetic fields
9 Mechanical performance requirements
   9.1 Vibration
   9.2 Mechanical shock
   9.3 Impact (microphonics)
10 Documentation
   10.1 Certificate
   10.2 Operation and maintenance manual
Annex A (informative) Bibliography
      A.1 General
      A.2 Detectors
      A.3 Detection and identification instruments
      A.4 Radiological protection instruments
      A.5 Electromagnetic compatibility
      A.6 Units, quantities, calibrations
Annex B (informative) Detector tests
Annex C (informative) Sample user interface evaluation technique

Describes general requirements and test procedures, radiation response requirements, and electrical, mechanical, and environmental requirements.

Committee
Standards Association Standards Board
DocumentType
Standard
ISBN
978-0-7381-5281-3
Pages
45
PublisherName
Institute of Electrical & Electronics Engineers
Status
Withdrawn
SupersededBy
Supersedes

IEEE/ANSI N42.35-2006 American National Standard Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
BS IEC 62755 CD : 2012 RADIATION PROTECTION INSTRUMENTATION - DATA FORMAT FOR RADIATION INSTRUMENTS USED IN THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIALS
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE/ANSI N42.37-2006 American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention
08/30140155 DC : DRAFT JULY 2008
IEEE/ANSI N42.48-2008 American National Standard Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs) for Homeland Security
ASTM E 2851/E2851M : 2013 Standard Specification for Ruggedness Requirements for HAZMAT Instrumentation
IEEE/ANSI N42.33-2006 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
11/30253811 DC : 0 BS IEC 62755 - RADIATION PROTECTION INSTRUMENTATION - DATA FORMAT FOR RADIATION INSTRUMENTS USED IN THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIALS
IEEE/ANSI N42.42-2012 REDLINE American National Standard Data Format for Radiation Detectors Used for Homeland Security
IEEE/ANSI N42.38-2006 American National Standard Performance Criteria for Spectroscopy-Based Portal Monitors Used for Homeland Security
IEEE/ANSI N42.42-2006 American National Standard Data Format Standard for Radiation Detectors Used for Homeland Security

IEEE N42.12-1994 American National Standard Calibration and Usage of Thallium-Activated Sodium Iodide Detector Systems for Assay of Radionuclides
IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
IEEE/ANSI N323A-1997 American National Standard Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
IEEE C62.41-1991 IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEEE/ANSI N42.13-1986 American National Standard Calibration and Usage of \"Dose Calibrator\" Ionization Chambers for the Assay of Radionuclides
IEC 61000-4-1:2006 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
ISO 22188:2004 Monitoring for inadvertent movement and illicit trafficking of radioactive material
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
IEEE/ANSI N323B-2003 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation
ANSI N13.27 : 1981 DOSIMETERS AND ALARM RATEMETERS, PERFORMANCE REQUIREMENTS FOR POCKET-SIZED ALARM
IEEE/ANSI N42.31-2003 American National Standard for Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation
IEEE/ANSI N42.42-2012 REDLINE American National Standard Data Format for Radiation Detectors Used for Homeland Security
CFR 47(PTS0-19) : OCT 2017 TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION
IEC 62327:2006 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation
ISO 4037-2:1997 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEEE/ANSI N42.32-2006 American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security
IEEE N42.20-2003 American Standard Performance Criteria for Active Personnel Radiation Monitors
ISO 8529-2:2000 Reference neutron radiations Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
IEEE/ANSI N42.17C-1989 American National Standard Performance Specifications for Health Physics Instrumentation. Portable Instrumentation for Use in Extreme Environmental Conditions
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEEE/ANSI N42.14-1999 American National Standard for Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEEE/ANSI N42.35-2006 American National Standard Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
ISO 4037-1:1996 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 1: Radiation characteristics and production methods
ISO 8529-1:2001 Reference neutron radiations Part 1: Characteristics and methods of production
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60395:1972 Portable X or gamma radiation exposure rate meters and monitors for use in radiological protection
IEC 61455:1995 Nuclear instrumentation - MCA histogram data interchange format for nuclear spectroscopy
ISO 4037-3:1999 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
IEEE/ANSI N42.33-2006 American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
IEEE N42.17B-1989 American National Standard Performance Specifications for Health Physics Instrumentation. Occupational Airborne Radioactivity Monitoring Instrumentation

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.