IEEE/ANSI C63.26-2015
Current
The latest, up-to-date edition.
IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services
Hardcopy , PDF
English
15-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Overview
2 Normative references
3 Definitions and acronyms
4 Measurement instrumentation
5 Basic measurement considerations for transmitters
6 Additional test methods for transmitters in specific
licensed radio services
7 RF repeaters, amplifiers, and boosters testing
8 Test reports
Annex A (informative) - Example of test report contents
Annex B (informative) - Pre-test site path loss
characterization for determining radiated emissions
Annex C (informative) - Basic relationships among field
strength, power, effective radiated power, and
equivalent isotropically radiated power
Annex D (informative) - Broadband measurements
considerations
Annex E (informative) - Consumer signal booster authorized
frequency bands
Annex F (informative) - Consumer signal MSCL booster
definitions and conditions
Annex G (informative) - Wideband consumer booster noise
and gain limits charts
Annex H (informative) - Provider-specific consumer booster
noise and gain limits figures
Annex I (informative) - Examples of out-of-band emission
limits and masks
Annex J (informative) - Glossary
Annex K (informative) - Bibliography and selected source
material
This consensus standard specifies methods, instrumentation, and facilities requirements for the compliance testing radio transmitters designed to operate in a licensed radio service.
| DocumentType |
Standard
|
| ISBN |
978-1-5044-0073-2
|
| Pages |
180
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| TIA TSB10 : F1994 | INTERFERENCE CRITERIA FOR MICROWAVE SYSTEMS |
| CISPR 16-4-2:2011+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| IEEE 377 : 1980 | MEASUREMENT OF SPURIOUS EMISSION FROM LAND-MOBILE COMMUNICATION TRANSMITTERS, RECOMMENDED PRACTICE FOR |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| EN 302 561 : 2.1.1 | LAND MOBILE SERVICE; RADIO EQUIPMENT USING CONSTANT OR NON-CONSTANT ENVELOPE MODULATION OPERATING IN A CHANNEL BANDWIDTH OF 25 KHZ, 50 KHZ, 100 KHZ OR 150 KHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU |
| TIA 603 : E2016 | LAND MOBILE FM OR PM COMMUNICATIONS EQUIPMENT MEASUREMENT AND PERFORMANCE STANDARDS |
| TR 102 070-1 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); GUIDE TO THE APPLICATION OF HARMONIZED STANDARDS TO MULTI-RADIO AND COMBINED RADIO AND NON-RADIO EQUIPMENT; PART 1: ELECTROMAGNETIC COMPATIBILITY |
| CISPR 16-2-1:2014 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| ATIS T1.523 : 2001 | |
| TIA TSB 88 : B2004 ADD 1 2005 | WIRELESS COMMUNICATION SYSTEMS - PERFORMANCE IN NOISE AND INTERFERENCE - LIMITED SITUATIONS - RECOMMENDED METHODS FOR TECHNOLOGY - INDEPENDENT MODELING, SIMULATION, AND VERIFICATIONS |
| TR 100 028-1 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); UNCERTAINTIES IN THE MEASUREMENT OF MOBILE RADIO EQUIPMENT CHARACTERISTICS PART 1 |
| IEEE 802.11-2016 | IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| EN 300 330-1 : 1.8.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND TEST METHODS |
| IEEE C63.4-2003 | IEEE Standard for Methods of Measurement of Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| IEEE 1560-2005 | IEEE Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz |
| TIA 102.CAAA : E2016 | PROJECT 25 - DIGITAL C4FM/CQPSK TRANSCEIVER MEASUREMENT METHODS |
| IEEE 1528-2013 REDLINE | IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| EN 302 245-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TRANSMITTING EQUIPMENT FOR THE DIGITAL RADIO MONDIALE (DRM) BROADCASTING SERVICE; PART 1: TECHNICAL CHARACTERISTICS AND TEST METHODS |
| TR 102 324 : 1.1.1 | POWERLINE TELECOMMUNICATIONS (PLT); RADIATED EMISSIONS' CHARACTERISTICS AND MEASUREMENT METHOD OF STATE OF THE ART POWERLINE COMMUNICATION NETWORKS |
| IEEE 686-2008 | IEEE Standard Radar Definitions |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEEE C63.5-1998 | American National Standard for Electromagnetic Compatibility Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration of Antennas (9 kHz to 40 GHz) |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ANSI C63.5 : 2006 | ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
| IEEE 802.16-2012 | IEEE Standard for Air Interface for Broadband Wireless Access Systems |
| EN 301 908-1 : 7.1.1 | IMT CELLULAR NETWORKS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE DIRECTIVE 2014/53/EU; PART 1: INTRODUCTION AND COMMON REQUIREMENTS |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
| IEEE/ANSI C63.17-2013 | American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| TR 100 028-2 : 1.4.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); UNCERTAINTIES IN THE MEASUREMENT OF MOBILE RADIO EQUIPMENT CHARACTERISTICS PART 2 |
| MIL-STD-463 Revision A:1977 | DEFINITION AND SYSTEM OF UNITS, ELECTROMAGNETIC INTERFERENCE TECHNOLOGY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.