IEEE 422-2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
30-03-2023
English
11-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. Overview
2. Normative references
3. Definitions and acronyms
4. Cable selection
5. Cable conductor sizing and voltage levels
6. Electrical segregation of cable systems
7. Separation of redundant cable systems
8. Shielding and shield grounding
9. Raceway
Annex A (informative) - Bibliography
This document provides guidance for the design and installation of cable raceway systems for all types of electric generating facilities.
| Committee |
Energy Development & Power Generation
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-8084-7
|
| Pages |
35
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| Supersedes |
| IEEE DRAFT C62.22 : D8 2005 | GUIDE FOR THE APPLICATION OF METAL-OXIDE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS |
| IEEE DRAFT 1050 : 0 | INSTRUMENTATION AND CONTROL EQUIPMENT GROUNDING IN GENERATING STATIONS |
| IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
| TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
| IEEE 1827-2016 | IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
| IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
| IEEE 789-2013 | IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments |
| IEEE 848-2015 | IEEE Standard Procedure for the Determination of the Ampacity Derating Factor for Fire-Protected Cable Systems |
| IEEE 628-2011 | IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
| IEEE 1202-2006 | IEEE Standard for Flame-Propagation Testing of Wire & Cable |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| NEMA FB 2.20 : 2014 | SELECTION AND INSTALLATION GUIDELINES FOR FITTINGS FOR USE WITH FLEXIBLE ELECTRICAL CONDUIT AND CABLE |
| ICEA S 93 639 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| IEEE C62.21 : 2003 | GUIDE FOR THE APPLICATION OF SURGE VOLTAGE PROTECTIVE EQUIPMENT ON AC ROTATING MACHINERY 1000 V AND GREATER |
| ICEA S 73 532 : 2014 | STANDARD FOR CONTROL, THERMOCOUPLE, EXTENSION AND INSTRUMENTATION CABLE |
| NEMA TC 6&8 : 2013 | POLYVINYL CHLORIDE (PVC) PLASTIC UTILITIES DUCT FOR UNDERGROUND INSTALLATIONS |
| NEMA TC 9 : 2004(R2012) | FITTINGS FOR POLYVINYL CHLORIDE (PVC) PLASTIC UTILITIES DUCT FOR UNDERGROUND INSTALLATION |
| ICEA P 54 440 : 2000(R2014) | AMPACITIES OF CABLES IN OPEN-TOP CABLE TRAYS |
| IEEE 400.1-2007 | IEEE Guide for Field Testing of Laminated Dielectric, Shielded Power Cable Systems Rated 5 kV and Above with High Direct Current Voltage |
| NEMA FB 2.10 : 2013 | SELECTION AND INSTALLATION GUIDELINES FOR FITTINGS FOR USE WITH NON-FLEXIBLE METALLIC CONDUIT OR TUBING (RIGID METAL CONDUIT, INTERMEDIATE METAL CONDUIT, AND ELECTRICAL METALLIC TUBING) |
| IEEE 400.2-2013 REDLINE | IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz) |
| ICEA P 32 382 : 2007(R2018) | SHORT CIRCUIT CHARACTERISTICS OF INSULATED CABLES |
| NEMA VE 2 : 2013 | CABLE TRAY INSTALLATION GUIDELINES |
| NEMA FG 1:1993 | FIBERGLASS CABLE TRAY SYSTEMS |
| IEEE 835-1994 | IEEE Standard Power Cable Ampacity Tables |
| NEMA VE 1:2017 | Metal Cable Tray Systems |
| IEEE C2-2017 | NATIONAL ELECTRICAL SAFETY CODE (NESC)(R) |
| NEMA TC 3 : 2016 | POLYVINYL CHLORIDE (PVC) FITTINGS FOR USE WITH RIGID PVC CONDUIT AND TUBING |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
| IEEE 690-2004 | IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
| ICEA S 97 682 : 2013 | UTILITY SHIELDED POWER CABLES RATED 5 THROUGH 46 KV |
| IEEE 946-2004 | IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Systems |
| IEEE 400-2012 REDLINE | IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above |
| IEC 60287-1-1:2006+AMD1:2014 CSV | Electric cables - Calculation of the current rating - Part 1-1:Current rating equations (100 % load factor) and calculation of losses - General |
| IEEE 1143-2012 | IEEE Guide on Shielding Practice for Low Voltage Cables |
| IEEE 1185-2010 | IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.