IEC 62281:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety of primary and secondary lithium cells and batteries during transport
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
25-11-2021
Superseded by
IEC 62281:2019+AMD1:2021+AMD2:2023 CSV
IEC 62281:2019
IEC 62281:2019+AMD1:2021 CSV
IEC 62281:2019 RLV
Published date
06-12-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
IEC 62281:2016 specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this standard do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions.
NOTE - Different standards may apply for lithium-ion traction battery systems used for electrically propelled road vehicles.
This third edition cancels and replaces the second edition, published in 2012, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Deletion of the wire mesh screen from the evaluation of test criteria for an explosion;
- Extension / modification of the shock test parameters so as to achieve constant energy behaviour for large batteries as well as explanations in a new Annex A;
- Modification of the external short-circuit method so as to allow the short-circuit to be applied to large batteries after they have been removed from the temperature chamber;
- Change of the cell diameter distinguishing between impact and crush test from 20 mm to 18 mm;
- Addition of possible content for a transport certificate.
| Committee |
TC 35
|
| DevelopmentNote |
Stability Date: 2019. (12/2016)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN IEC 62281 : 2013 | Identical |
| BS EN 62281:2017 | Identical |
| VDE 0509-6 : 2017 | Identical |
| NF EN 62281 : 2017 | Identical |
| SN EN 62281 : 2017 | Identical |
| EN 62281:2017 | Identical |
| PN EN 62281 : 2017 | Identical |
| DIN EN 62281 : 2017 | Identical |
| CEI EN 62281 : 2014 | Identical |
| PNE-FprEN 62281:2016 | Identical |
| UNE-EN 62281:2017 | Identical |
| UNE-EN 62281:2004 | Identical |
| UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
| SAE J2950_201202 | Recommended Practices (RP) for Shipping Transport and Handling of Automotive-Type Battery System - Lithium Ion |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| SAE J2936_201212 | SAE Electrical Energy Storage Device Labeling Recommended Practice |
| EN 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| EN 62282-6-100:2010/A1:2012 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012) |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| EN 60086-4:2015 | Primary batteries - Part 4: Safety of lithium batteries |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| EN 50272-1:2010 | Safety requirements for secondary batteries and battery installations - Part 1: General safety information |
| EN 60086-2:2016 | Primary batteries - Part 2: Physical and electrical specifications |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| EN 50272-4:2007 | Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances |
| EN 61960-3:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them |
| EN 60086-1:2015 | Primary batteries - Part 1: General |
| EN 62133:2013 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications |
| BS EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 50272-1:2010 | Safety requirements for secondary batteries and battery installations General safety information |
| ISO 17546:2016 | Space systems — Lithium ion battery for space vehicles — Design and verification requirements |
| DD IEC/PAS 62282-6-150:2011 | Fuel cell technologies Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells |
| IEC 60086-4:2014 | Primary batteries - Part 4: Safety of lithium batteries |
| IEC PAS 62282-6-150:2011 | Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells |
| IEC 60086-1:2015 | Primary batteries - Part 1: General |
| IEC 60086-2:2015 | Primary batteries - Part 2: Physical and electrical specifications |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| BS EN 60086-1:2016 | Primary batteries General |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 61960-3:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications Prismatic and cylindrical lithium secondary cells, and batteries made from them |
| ANSI/AAMI CI86:2017 | COCHLEAR IMPLANT SYSTEMS: REQUIREMENTS FOR SAFETY, FUNCTIONAL VERIFICATION, LABELING AND RELIABILITY REPORTING |
| BS EN 62282-6-100 : 2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| EN 62133-2:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems |
| UNE-EN 62133:2013 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications |
| BS ISO 17546:2016 | Space systems. Lithium ion battery for space vehicles. Design and verification requirements |
| BS EN 60086-4:2015 | Primary batteries Safety of lithium batteries |
| UNE-EN 50272-1:2011 | Safety requirements for secondary batteries and battery installations - Part 1: General safety information |
| BS EN 60086-2:2016 | Primary batteries Physical and electrical specifications |
| IEC 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| BS 8450:2006 | Code of practice for installation of electrical and electronic equipment in ships |
| UNE-EN 60086-2:2011 | Primary batteries - Part 2: Physical and electrical specifications |
| BS EN 62133:2013 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications |
| BS EN 50272-4:2007 | Safety requirements for secondary batteries and battery installations Batteries for use in portable appliances |
| BIS IS 16046 : 2015 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS |
| CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| IEC 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| BS EN 62133-2:2017 | Secondary cells and batteries containing alkaline or other non-acidelectrolytes. Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications Lithium systems |
| IEC 62282-6-100:2010+AMD1:2012 CSV | Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety |
| IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
| IEEE 1679.1-2017 | IEEE Guide for the Characterization and Evaluation of Lithium-Based Batteries in Stationary Applications |
| I.S. EN 60086-4:2015 | PRIMARY BATTERIES - PART 4: SAFETY OF LITHIUM BATTERIES |
| I.S. EN 50272-4:2007 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 4: BATTERIES FOR USE IN PORTABLE APPLIANCES |
| I.S. EN 60086-2:2016 | PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS |
| I.S. EN 62133-2:2017 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS - PART 2: LITHIUM SYSTEMS |
| I.S. EN 61960:2011 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SECONDARY LITHIUM CELLS AND BATTERIES FOR PORTABLE APPLICATIONS |
| I.S. EN 62133:2013 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS (IEC 62133:2012 (EQV)) |
| I.S. EN 60086-1:2015 | PRIMARY BATTERIES - PART 1: GENERAL |
| EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60050-482:2004 | International Electrotechnical Vocabulary (IEV) - Part 482: Primary and secondary cells and batteries |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| IEC 62660-1:2010 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing |
| IEC 60086-4:2014 | Primary batteries - Part 4: Safety of lithium batteries |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.