IEC 62132-4:2006
Current
Current
The latest, up-to-date edition.
Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
21-02-2006
Publisher
Describes a method to measure the immunity of integrated circuits (IC) in the presence of conducted RF disturbances, e.g. resulting from radiated RF disturbances. This method guarantees a high degree of repeatability and correlation of immunity measurements.This standard establishes a common base for the evaluation of semiconductor devices used in equipment functioning in an environment subject to unwanted radio frequency electromagnetic waves.
| DevelopmentNote |
Stability Date: 2015. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
49
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Standards | Relationship |
| NEN EN IEC 62132-4 : 2006 | Identical |
| I.S. EN 62132-4:2006 | Identical |
| PN EN 62132-4 : 2009 | Identical |
| SN EN 62132-4 : 2006 | Identical |
| UNE-EN 62132-4:2006 | Identical |
| BS EN 62132-4:2006 | Identical |
| CEI EN 62132-4 : 2006 | Identical |
| EN 62132-4:2006 | Identical |
| NF EN 62132-4 : 2006 | Identical |
| DIN EN 62132-4:2006-10 | Identical |
| PNE-EN 62132-4 | Identical |
| BS EN 62228-2:2017 | Integrated circuits. EMC evaluation of transceivers LIN transceivers |
| EN 62433-4:2016 | EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI) |
| 10/30209944 DC : 0 | BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| CEI EN 62228-2 : 1ED 2017 | INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS |
| I.S. EN 62228-2:2017 | INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS |
| CEI EN 62215-3 : 2014 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| EN IEC 62969-1:2018 | Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors |
| 17/30350017 DC : 0 | BS EN 62228-1 - INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
| 14/30310470 DC : 0 | BS EN 62228-2 - INTEGRATED CIRCUITS - EMC EVALUATION OF LIN TRANSCEIVERS |
| IEC TS 62215-2:2007 | Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method |
| 14/30310474 DC : 0 | BS EN 62433-4 ED 1.0 - EMC IC MODELLING - PART 4: MODELS OF INTEGRATED CIRCUITS FOR RF IMMUNITY BEHAVIOURAL SIMULATION - CONDUCTED IMMUNITY MODELLING (ICIM-CI) |
| BS EN 62132-1:2016 | Integrated circuits. Measurement of electromagnetic immunity General conditions and definitions |
| I.S. EN 62215-3:2013 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD (IEC 62215-3:2013 (EQV)) |
| I.S. EN 62132-1:2016 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
| IEC TS 62228:2007 | Integrated circuits - EMC evaluation of CAN transceivers |
| IEC 62969-1:2017 | Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors |
| BS EN 62433-4:2016 | EMC IC modelling Models of integrated circuits for RF immunity behavioural simulation. Conducted immunity modelling (ICIM-CI) |
| DD IEC/TS 62215-2:2007 | Integrated circuits. Measurement of impulse immunity Synchronous transient injection method |
| NF EN 62215-3 : 2014 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| 05/30137850 DC : DRAFT AUG 2005 | IEC 62215-2 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 2: IMPULSE INJECTION METHOD |
| 12/30268333 DC : 0 | BS EN 62132-1 - INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY - PART 1: GENERAL CONDITIONS AND DEFINITIONS |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| IEC 62228-1:2018 | Integrated circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions |
| IEC 62215-3:2013 | Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
| IEC 62132-1:2015 | Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
| CEI EN 62433-4 : 1ED 2017 | EMC IC MODELLING - PART 4: MODELS OF INTEGRATED CIRCUITS FOR RF IMMUNITY BEHAVIOURAL SIMULATION - CONDUCTED IMMUNITY MODELLING (ICIM-CI) |
| BS EN 62215-3:2013 | Integrated circuits. Measurement of impulse immunity Non-synchronous transient injection method |
| 16/30336986 DC : 0 | BS EN 62969-1 - SEMICONDUCTOR DEVICES - SEMICONDUCTOR INTERFACE FOR AUTOMOTIVE VEHICLES - PART 1: GENERAL REQUIREMENTS OF POWER INTERFACE FOR AUTOMOTIVE VEHICLE SENSORS |
| DD IEC/TS 62228:2007 | Integrated circuits. EMC evaluation of CAN transceivers |
| ISO/IEC/IEEE 8802-3:2017 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet |
| IEC 62228-2:2016 | Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers |
| IEC 62433-4:2016 | EMC IC modelling - Part 4: Models of integrated circuits for RF immunity behavioural simulation - Conducted immunity modelling (ICIM-CI) |
| EN 62132-1:2016 | Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
| EN 62228-2:2017 | Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers |
| EN 62215-3:2013 | Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| ISO 11451-3:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation |
| IEC 62132-1:2015 | Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| IEC 61967-4:2002+AMD1:2006 CSV | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| ISO 11451-2:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources |
| ISO 11452-7:2003 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection |
| ISO 11451-4:2013 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) |
| ISO 11451-1:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.