IEC 60838-1:2016+AMD1:2017 CSV
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Miscellaneous lampholders - Part 1: General requirements and tests
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-02-2020
English - French
02-02-2017
IEC 60838-1:2016+A1:2017 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in Annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. This fifth edition cancels and replaces the fourth edition published in 2004, Amendment 1:2008 and Amendment 2:2011. This edition constitutes a technical revision. The significant technical changes in this edition with respect to the previous edition include the introduction of new or revised requirements for single and dual contact ignition voltages, steel test caps and brass test caps and an Annex E listing amended requirements/clauses which require products to be retested. This consolidated version consists of the fifth edition (2016) and its amendment 1 (2017). Therefore, no need to order amendment in addition to this publication.
Committee |
TC 34/SC 34B
|
DevelopmentNote |
Supersedes 95/206032 DC Supersedes 97/203091 DC (07/2004) Stability Date: 2019. (02/2017)
|
DocumentType |
Standard
|
Pages |
162
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
PN EN 60838-1 : 2017 AMD 1 2017 | Identical |
SN EN 60838-1 : 2017 | Identical |
BS EN 60838-1 : 2017 | Identical |
NEN EN IEC 60838-1 : 2017 AMD 1 2017 | Identical |
EN 60838-1:2017/A1:2017 | Identical |
NF EN 60838-1 : 2017 AMD 1 2017 | Identical |
UNE-EN 60838-1:2017 | Identical |
UNE-EN 60838-1:2017/A1:2017 | Identical |
DIN EN 60838-1 : 2017 AMD 1 2018 | Identical |
UNE-EN 60838-1:2006 | Identical |
GOST IEC 60838-1 : 2011 | Identical |
ONORM OVE EN 60838-1 : 2017 AMD 1 2018 | Identical |
GOST R IEC 60838-1 : 2008 | Identical |
NEN 10838-1 : 95 AMD 1 97 | Identical |
VDE 0616-5 : 2017 AMD 1 2018 | Identical |
I.S. EN 60399:2004 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
07/30168995 DC : 0 | BS EN 60399 AMD 1 - BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
I.S. EN 60400:2017 | LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS |
EN 61184:2017 | Bayonet lampholders |
BS IEC 60092-306:2009 | Electrical installations in ships Equipment. Luminaires and lighting accessories |
CEI 34-119 : 2010 | GUIDE FOR LUMINAIRE DESIGN - INFORMATION FOR A SAFE AND CORRECT OPERATION OF THE LIGHT SOURCES |
UNE-IEC 60092-306:2010 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
BS EN 60399 : 2004 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
IEC 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
CEI EN 60432-3 : 2013 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN-HALOGEN LAMPS (NON-VEHICLE) |
BS EN 60432-3:2013 | Incandescent lamps. Safety specifications Tungsten-halogen lamps (non-vehicle) |
IEC 61184:2017 | Bayonet lampholders |
BS EN 60838-2-2 : 2006 | MISCELLANEOUS LAMPHOLDERS - PART 2-2: PARTICULAR REQUIREMENTS - CONNECTORS FOR LED-MODULES |
EN 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
I.S. EN 61184:2017 | BAYONET LAMPHOLDERS |
09/30206120 DC : 0 | BS EN 60061-1 - LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 1: LAMP CAPS (AMENDMENT 44); PART 2: LAMPHOLDERS (AMENDMENT 41); PART 3: GAUGES (AMENDMENT 42); PART 4: GUIDELINES AND GENERAL INFORMATION (AMENDMENT 13) |
08/30186163 DC : DRAFT JULY 2008 | BS IEC 60092-306 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 306: EQUIPMENT - LUMINAIRES AND LIGHTING ACCESSORIES |
15/30294905 DC : 0 | BS EN 60838-2-3 ED1.0 - MISCELLANEOUS LAMPHOLDERS - PART 2-3: PARTICULAR REQUIREMENTS - LAMPHOLDERS FOR DOUBLE-CAPPED LINEAR LED LAMPS |
BS EN 60061-4:1992+A16:2018 | Lamp caps and holders together with gauges for the control of interchangeability and safety Guidelines and general information |
CEI EN 60838-2-3 : 1ED 2017 | MISCELLANEOUS LAMPHOLDERS - PART 2-3: PARTICULAR REQUIREMENTS - LAMPHOLDERS FOR DOUBLE-CAPPED LINEAR LED LAMPS |
I.S. EN 60838-2-3:2017 | MISCELLANEOUS LAMPHOLDERS - PART 2-3: PARTICULAR REQUIREMENTS - LAMPHOLDERS FOR DOUBLE-CAPPED LINEAR LED LAMPS |
IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
IEC 60838-2-3:2016 | Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps |
IEC 60399:2004+AMD1:2008 CSV | Barrel thread for lampholders with shade holder ring |
I.S. EN 60432-3:2013 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTENHALOGEN LAMPS (NON-VEHICLE) (IEC 60432-3:2012 (EQV)) |
I.S. EN 60061-4:1993 | LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 4: GUIDELINES AND GENERAL INFORMATION |
BS EN 60838-2-3:2017 | Miscellaneous lampholders Particular requirements. Lampholders for double-capped linear LED lamps |
BS EN 61184:2017 | Bayonet lampholders |
UNE-EN 60432-3:2013 | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
IEC 60092-306:2009 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
EN 60061-4:1992/A16:2018 | LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 4: GUIDELINES AND GENERAL INFORMATION (IEC 60061-4:1990/A16:2018) |
IEC 60432-3:2012 | Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) |
EN 60838-2-3:2017 | Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps |
EN 60399:2004/A1:2008 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
EN 60838-2-2:2006/A1:2012 | MISCELLANEOUS LAMPHOLDERS - PART 2-2: PARTICULAR REQUIREMENTS - CONNECTORS FOR LED-MODULES (IEC 60838-2-2:2006/A1:2012) |
EN 60432-3:2013 | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
UNE-EN 60061-4:1996 | LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHAngeability and safety. Part 4: Guidelines and general information. |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
IEC 60664-4:2005 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
IEC 60399:2004+AMD1:2008 CSV | Barrel thread for lampholders with shade holder ring |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.