IEC 60812:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
31-12-2021
Superseded by
Language(s)
English - French, English, French, Spanish, Castilian
Published date
25-01-2006
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Overview
4.1 Introduction
4.2 Purpose and objectives of the analysis
5 Failure modes and effects analysis
5.1 General considerations
5.2 Preliminary tasks
5.3 Failure mode, effects, and criticality analysis (FMECA)
5.4 Report of analysis
6 Other considerations
6.1 Common-cause failures
6.2 Human factors
6.3 Software errors
6.4 FMEA regarding consequences of system failure
7 Applications
7.1 Use of FMEA/FMECA
7.2 Benefits of FMEA
7.3 Limitations and deficiencies of FMEA
7.4 Relationships with other methods
Annex A (informative) Summary of procedures for FMEA and FMECA
Annex B (informative) Examples of analyses
Bibliography
This International Standard describes Failure Mode and Effects Analysis (FMEA) and Failure Mode, Effects and Criticality Analysis (FMECA), and gives guidance as to how they may be applied to achieve various objectives by: providing the procedural steps necessary to perform analysis; identifying appropriate terms; defining basic principles; providing examples of the necessary worksheets or other tabular forms.
| Committee |
TC 56
|
| DevelopmentNote |
Stability Date: 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
93
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| OVE/ONORM EN 60812 : 2006 | Identical |
| JIS C 5750-4-3:2011 | Identical |
| NF EN 60812 : 2006 | Identical |
| NEN EN IEC 60812 : 2006 | Identical |
| I.S. EN 60812:2006 | Identical |
| PN EN 60812 : 2009 | Identical |
| SAC GB/T 7826 : 1987 | Identical |
| SN EN 60812 : 2006 | Identical |
| AS IEC 60812-2008 | Identical |
| BIS IS 11137-2 : 2012(R2016) | Identical |
| BS EN 60812:2006 | Identical |
| CEI EN 60812 : 2006 | Identical |
| EN 60812:2006 | Identical |
| DIN EN 60812:2015-08 (Draft) | Identical |
| UNE-EN 60812:2006 | Identical |
| HD 485 : 200S1 | Identical |
| DIN 25448:1990-05 | Corresponds |
| UNE 20812:1995 | Identical |
| CEI 56-1 : 1ED 1997 | Identical |
| NFX 60 510 : 1986 | Identical |
| UNE-EN 60812:2008 | Identical |
| DD CEN ISO/TS 22367:2010 | Medical laboratories. Reduction of error through risk management and continual improvement |
| 14/30299530 DC : 0 | BS EN 62923 - MARITIME NAVIGATION AND RADIO COMMUNICATION EQUIPMENT AND SYSTEMS -BRIDGE ALERT MANAGEMENT - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| CEI 56-46 : 2005 | DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES |
| PD IEC/TR 63039:2016 | Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state |
| EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
| BS EN 61427-2:2015 | Secondary cells and batteries for renewable energy storage. General requirements and methods of test On-grid applications |
| 09/30195890 DC : DRAFT OCT 2009 | BS ISO 13379-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES - PART 1: GENERAL GUIDELINES |
| BS EN 31010:2010 | Risk management. Risk assessment techniques |
| BS EN 61226:2010 | Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions |
| BS EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems |
| 12/30227555 DC : 0 | BS EN 60860 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION WARNING EQUIPMENT FOR CRITICALITY ACCIDENTS |
| 15/30328959 DC : 0 | BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| DD CEN/TS 13763-27:2003 | Explosives for civil uses. Detonators and relays Definitions, methods and requirements for electronic initiation systems |
| I.S. EN 12445:2000 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS |
| 15/30324519 DC : 0 | BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
| ISO 15686-7:2017 | Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice |
| UNE-EN 61907:2013 | Communication network dependability engineering |
| CEI EN 61869-6 : 1ED 2017 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| 10/30235503 DC : 0 | BS EN 61496-1 AMD 2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEI EN 60300-3-12 : 2012 | DEPENDABILITY MANAGEMENT - PART 3-12: APPLICATION GUIDE - INTEGRATED LOGISTIC SUPPORT |
| BS ISO 13381-1:2015 | Condition monitoring and diagnostics of machines. Prognostics General guidelines |
| 10/30198892 DC : 0 | BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| 13/30279579 DC : 0 | BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY |
| DEFSTAN 00-58(PT2)/2(2000) : 2000 | HAZOP STUDIES ON SYSTEMS CONTAINING PROGRAMMABLE ELECTRONICS - PART 2: GENERAL APPLICATION GUIDANCE |
| CSA Q636 : 0 | GUIDELINES AND REQUIREMENTS FOR RELIABILITY ANALYSIS METHODS |
| PD IEC/TS 62941:2016 | Terrestrial photovoltaic (PV) modules. Guidelines for increased confidence in PV module design qualification and type approval |
| PD CR 954-100:1999 | Safety of machinery. Safety-related parts of control systems Guide on the use and application of EN 954-1:1996 |
| 16/30346073 DC : 0 | BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| 02/714108 DC : DRAFT DEC 2002 | BS ISO 13381-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - PROGNOSTICS - PART 1: GENERAL GUIDELINES |
| CEI EN 61014 : 2006 | PROGRAMMES FOR RELIABILITY GROWTH |
| I.S. EN 62506:2013 | METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013 (EQV)) |
| BS EN 62502:2011 | Analysis techniques for dependability. Event tree analysis (ETA) |
| BS IEC 60860:2014 | Radiation protection instrumentation. Warning equipment for criticality accidents |
| BS EN 60987:2015 | Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| BS EN 61078:2016 | Reliability block diagrams |
| 17/30337986 DC : 0 | BS EN ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
| BS EN 62198:2014 | Managing risk in projects. Application guidelines |
| MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
| CEI EN 61907 : 2011 | COMMUNICATION NETWORK DEPENDABILITY ENGINEERING |
| 10/30175182 DC : 0 | BS EN 62551 - ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET MODELLING |
| 05/30101071 DC : DRAFT FEB 2005 | |
| BS ISO 13379:2003 | Condition monitoring and diagnostics of machines. General guidelines on data interpretation and diagnostics techniques |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| 01/205664 DC : DRAFT JUL 2001 | DRAFT IEC 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS |
| CEI EN 60300-3-2 : 2006 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| UNI ISO 13372 : 2013 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VOCABULARY |
| AAMI ISO 13408-1 : 2008 : R2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| CSA ISO 14971 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO/IEC 16085 : 2007 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| I.S. EN 60044-8:2002 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| BS EN 60044-8:2002 | Instrument transformers Electronic current transformers |
| CEI EN 50495 : 2011 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
| CSA C60044-8 : 2007 : R2016 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| SAE J 1211 : 2012 | HANDBOOK FOR ROBUSTNESS VALIDATION OF AUTOMOTIVE ELECTRICAL/ELECTRONIC MODULES |
| ANSI FC 1 : 2012 | STATIONARY FUEL CELL POWER SYSTEMS |
| CEI EN 62308 : 2010 | EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS |
| I.S. EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV)) |
| GOST ISO 14698-1 : 2005 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
| CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
| PD ISO/IEC/TR 15026-1:2010 | Systems and software engineering. Systems and software assurance Concepts and vocabulary |
| EN 50126-1:2017 | Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process |
| CSA C22.2 No. 62282-2 : 2007 : R2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| I.S. EN 62282-6-100:2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV)) |
| ISO 16142-2:2017 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| I.S. EN 61508-7:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
| BS EN 62402:2007 | Obsolescence management. Application guide |
| I.S. EN 61882:2016 | HAZARD AND OPERABILITY STUDIES (HAZOP STUDIES) - APPLICATION GUIDE |
| I.S. EN 62628:2012 | GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY (IEC 62628:2012 (EQV)) |
| BS EN ISO 20815:2010 | Petroleum, petrochemical and natural gas industries. Production assurance and reliability management |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| NF ISO 16110-1 : 2009 | HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY |
| UNE-EN 62198:2015 | Managing risk in projects - Application guidelines |
| CCS GUIDE FOR SAFETY AND RELIABILITY : 2017 | GUIDE FOR SAFETY AND RELIABILITY ASSESSMENT FOR SHIPBOARD SOFTWARE |
| I.S. EN 60300-3-15:2009 | DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY |
| I.S. EN 61165:2006 | APPLICATION OF MARKOV TECHNIQUES |
| ISO 13379-1:2012 | Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines |
| EN ISO 80079-36:2016 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
| DIN EN ISO 13849-2:2013-02 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| UNE-EN ISO 13849-2:2013 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| BS EN 12075:1997 | Biotechnology. Large scale process and production. Procedures for fermentation and downstream processes |
| 05/30060689 DC : DRAFT JUN 2005 | IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY |
| IEC 62673:2013 | Methodology for communication network dependability assessment and assurance |
| IEC 61069-5:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| EN 61924-2:2013 | Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| CLC/TR 50126-2:2007 | Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 2: Guide to the application of EN 50126-1 for safety |
| EN 62282-3-1 : 2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| EN 50129 : 2003 COR 2010 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| EN 62506 : 2013 | METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013) |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| EN 61162-460:2015 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security |
| EN 60300-3-12:2011 | Dependability management - Part 3-12: Application guide - Integrated logistic support |
| EN 60300-3-2:2005 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| EN 62402 : 2007 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| EN 62940:2017 | Maritime navigation and radiocommunication equipment and systems - Integrated communication system (ICS) - Operational and performance requirements, methods of testing and required test results |
| CR 954-100:1999 | Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996 |
| EN 12445:2000 | Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
| EN 60300-3-15 : 2009 | DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY |
| EN 60300-3-4:2008 | Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements |
| EN 62429:2008 | Reliability growth - Stress testing for early failures in unique complex systems |
| EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| EN 62673 : 2013 | METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE (IEC 62673:2013) |
| EN 61882:2016 | Hazard and operability studies (HAZOP studies) - Application guide |
| EN 61907:2010 | Communication network dependability engineering |
| EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| DIN EN ISO 14698-1:2004-04 | Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003) |
| EN 62308 : 2006 | EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS |
| EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| EN 61025:2007 | Fault tree analysis (FTA) |
| EN 12075:1997 | Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes |
| IPC 9592 : B | REQUIREMENTS FOR POWER CONVERSION DEVICES FOR THE COMPUTER AND TELECOMMUNICATIONS INDUSTRIES |
| DEFSTAN 00-56(PT2)/2(1996) : 1996 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE |
| BS IEC 60300-3-1 : 2003 AMD 15370 | DEPENDABILITY MANAGEMENT - APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| I.S. EN 50129:2003 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| CEI 56-53 : 2006 | DEPENDABILITY MANAGEMENT - PART 3-10: APPLICATION GUIDE - MAINTAINABILITY |
| NF EN 61226 : 2010 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS |
| IEEE 497-2010 | IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations |
| 06/30123954 DC : DRAFT MAR 2006 | |
| IEEE C37.10.1-2000 | IEEE Guide for the Selection of Monitoring for Circuit Breakers |
| IEEE DRAFT C37.10-1 : D4.0 JULY 2000 | DRAFT GUIDE FOR THE SELECTION OF MONITORING FOR CIRCUIT BREAKERS |
| 06/30109242 DC : DRAFT SEP 2006 | ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
| UNE-EN 60300-3-15:2013 | Dependability management -- Part 3-15: Application guide - Engineering of system dependability |
| UNE-EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| BS EN 62282-6-100 : 2010 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY |
| CEI EN 62628 : 2013 | GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY |
| BS IEC 60300-3.10 : 2001 | DEPENDABILITY MANAGEMENT - PART 3-10: APPLICATION GUIDE - MAINTAINABILITY |
| BS 5724-1.4(1997) : 1997 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - GENERAL REQUIREMENTS FOR PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
| 11/30201416 DC : DRAFT DEC 2011 | BS EN 61924-2 - MARITIME NAVIGATION AND RADIO COMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED NAVIGATION SYSTEMS (INS) - PART 2: MODULAR STRUCTURE FOR INS. OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| 14/30273218 DC : 0 | BS ISO 13381-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - PROGNOSTICS - PART 1: GENERAL GUIDELINES |
| 12/30265031 DC : 0 | BS EN 60825-12 ED.2 - SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| BS ISO 13379-1:2012 | Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques General guidelines |
| BS EN 60706-2:2006 | Maintainability of equipment Maintainability requirements and studies during the design and development phase |
| PD CLC/TR 50126-2:2007 | Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS) Guide to the application of EN 50126-1 for safety |
| BS EN 62429:2008 | Reliability growth. Stress testing for early failures in unique complex systems |
| PD IEC/TR 62721:2012 | Reliability of devices used in fibre optic systems. General and guidance |
| BS IEC 62198:2001 | Project risk management. Application guidelines |
| BS IEC 60300-3.5 : 2001 | DEPENDABILITY MANAGEMENT - PART 3-5: APPLICATION GUIDE - RELIABILITY TEST CONDITIONS AND STATISTICAL TEST PRINCIPLES |
| I.S. EN 62551:2012 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012 (EQV)) |
| BS ISO 15378 : 2006 AMD 17315 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| UNE-EN 62628:2015 | Guidance on software aspects of dependability |
| DIN EN ISO 13408-1:2015-12 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| UNE-EN 62551:2014 | Analysis techniques for dependability - Petri net techniques |
| 05/30076956 DC : 0 | BS EN 12445 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - TEST METHODS |
| I.S. EN 50156-2:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| 17/30341578 DC : DRAFT MAY 2017 | BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| BS EN 60300-3-12:2011 | Dependability management Application guide. Integrated logistic support |
| CSA E61496.1 :2004 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 61069-5:2016 | Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system dependability |
| IEEE 1413.1 : 2002 | SELECTING AND USING RELIABILITY PREDICTIONS BASED ON IEEE 1413 |
| BS EN 61907:2010 | Communication network dependability engineering |
| 03/118789 DC : DRAFT DEC 2003 | IEC 60706-2 - MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE |
| BS EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results |
| CSA CEI/IEC 300.3.9 : 1997 | DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 9: RISK ANALYSIS OF TECHNOLOGICAL SYSTEMS |
| ANSI/AAMI/ISO 16142-2:2017 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| BS 6548-4:1993 | Maintainability of equipment Guide to the planning of maintenance and maintenance support |
| BS ISO/IEC 16085:2006 | Systems and software engineering. Life cycle processes. Risk management |
| 94/408162 DC : DRAFT MAR 94 | THE RELIABILITY CENTRED MAINTENANCE (RCM) STANDARD [IEC CD 56 (SECRETARIAT)394] |
| CEI EN 60706-2 : 2006 | MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE |
| CEI EN 61508-7 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
| I.S. EN ISO 80079-36:2016 | EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014) |
| CSA ISO/IEC 16085 : 2007 : R2012 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| CEI EN 60300-3-11 : 2011 | DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE |
| BS EN 62308:2006 | Equipment reliability. Reliability assessment methods |
| CLC/TR 62662:2011 | Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials |
| UNE-EN 62402:2011 | Obsolescence management - Application guide |
| CEI EN 62402 : 2008 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| IEC 61882:2016 RLV | Hazard and operability studies (HAZOP studies) - Application guide |
| CSA C60044-8 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| IEC 61497:1998 | Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation |
| EN 61226:2010 | Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions |
| BS EN ISO 13408-1:2015 | Aseptic processing of health care products General requirements |
| CEI EN 61924-2 : 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED NAVIGATION SYSTEMS (INS) - PART 2: MODULAR STRUCTURE FOR INS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 60300-3-11:2009 | DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE |
| I.S. EN 61924-2:2013 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED NAVIGATION SYSTEMS - PART 2: MODULAR STRUCTURE FOR INS - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61924-2:2012 (EQV)) |
| I.S. EN 62282-3-1:2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 61496-1:2013 | Safety of machinery. Electro-sensitive protective equipment General requirements and tests |
| I.S. EN 60300-3-2:2005 | DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| UNE-EN 60300-3-11:2013 | Dependability management -- Part 3-11: Application guide - Reliability centred maintenance |
| ISO/TR 16335:2013 | Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification |
| I.S. EN 62508:2010 | GUIDANCE ON HUMAN ASPECTS OF DEPENDABILITY |
| CSA ISO/IEC TR 15026-1 : 2013 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY |
| EN 16991:2018 | Risk-based inspection framework |
| BS EN 50129:2003 | Railway applications. Communication, signalling and processing systems. Safety related electronic systems for signalling |
| ASTM E 2352 : 2019 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations |
| ASTM E 2352 : 2004 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| ISO/IEC TR 15026-1:2010 | Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary |
| CSA ISO/IEC 15026-1 : 2015 | SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| EN 60987:2015 | Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
| ASTM E 2476 : 2016 : REDLINE | Standard Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture |
| CEI UNI EN ISO 14971 : 2013 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| IEC 63147:2017 | Criteria for accident monitoring instrumentation for nuclear power generating stations |
| IEC PAS 62282-6-150:2011 | Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN Devision 4.3) compounds in indirect PEM fuel cells |
| ISO 8468:2007 | Ships and marine technology — Ship's bridge layout and associated equipment — Requirements and guidelines |
| IEC TR 62721:2012 | Reliability of devices used in fibre optic systems - General and guidance |
| I.S. EN 60300-2:2004 | DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT |
| I.S. EN ISO 14971:2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| ISO 80079-36:2016 | Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS EN 1441:1998 | Medical devices. Risk analysis |
| BS EN ISO 13849-2:2012 | Safety of machinery. Safety-related parts of control systems Validation |
| UNE-EN 61508-7:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures |
| BS EN ISO 14698-1:2003 | Cleanrooms and associated controlled environments. Biocontamination control General principles and methods |
| IEC 62508:2010 | Guidance on human aspects of dependability |
| I.S. EN ISO 13849-2:2012 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| ANSI B11 TR3 : 2000 | RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| I.S. EN 60825-2:2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| I.S. EN ISO 13849-1:2015 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| I.S. EN ISO 14698-1:2003 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES AND METHODS |
| VDI 4068 Blatt 1:2016-03 | Competent persons - Qualification criteria and commissioning |
| IEC 61882:2016 | Hazard and operability studies (HAZOP studies) - Application guide |
| VDI 4007:2012-06 | Reliability goals - Determination, check, review, certificate |
| VDI 4002 Blatt 2:2011-09 | Reliability Engineer - Requirements for qualification |
| VDI/VDE 3516 Blatt 1:1978-10 | Process analytical equipment |
| BS 5760-2:1994 | Reliability of systems, equipment and components Guide to the assessment of reliability |
| VDI/VDE 3528 Blatt 1:2017-06 | Requirements of commercial grade products and criteria for their use in the instrumentation and control systems important to safety in nuclear power plants - General part |
| I.S. EN 61078:2016 | RELIABILITY BLOCK DIAGRAMS |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| BS EN 62673:2013 | Methodology for communication network dependability assessment and assurance |
| I.S. EN 60987:2015 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS |
| PD ISO/TS 18667:2018 | Space systems. Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management |
| BS EN 62506:2013 | Methods for product accelerated testing |
| PD IEC/TR 62987:2015 | Nuclear power plants. Instrumentation and control systems important to safety. Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems |
| ISO 16142-1:2016 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
| 12/30268377 DC : 0 | BS EN 50156-2 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| 16/30346333 DC : 0 | BS EN 61162-460 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS -DIGITAL INTERFACES - PART 460: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION - SAFETY AND SECURITY |
| 13/30293679 DC : 0 | BS EN 62619 - SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS |
| BS EN 60825-12:2004 | Safety of laser products Safety of free space optical communication systems used for transmission of information |
| 04/30066208 DC : DRAFT DEC 2004 | ISO 14224 - PETROLEUM AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
| ISO/TS 17929:2014 | Biomechanical effects on amusement ride passengers |
| CEI EN 62429 : 2008 | RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS |
| I.S. EN 1050:1997 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| 13/30268559 DC : 0 | BS ISO/IEC 15026-1 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 1: CONCEPTS AND VOCABULARY |
| 12/30187831 DC : 0 | BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| DIN ISO 17359:2011-09 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| ISO 20780:2018 | Space systems — Fiber optic components — Design and verification requirements |
| BS ISO 12132:2017 | Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA |
| PREN 50156-2 : DRAFT 2012 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| BS IEC/TR 61838:2001 | Nuclear power plants. Use of probabilistic safety asessment for the classification of instrumentation and control functions |
| IEEE 15026-3-2013 | IEEE Standard Adoption of ISO/IEC 15026-3 -- Systems and Software Engineering -- Systems and Software Assurance -- Part 3: System Integrity Levels |
| PD CLC/TR 62662:2011 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Test procedure of optical durability |
| CEI EN 62502 : 2012 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA) |
| PD IEC/TR 61838:2009 | Nuclear power plants. Instrumentation and control important to safety. Use of probabilistic safety assessment for the classification of functions |
| 16/30354071 DC : 0 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 61924-2:2013 | Maritime navigation and radiocommunication equipment and systems. Integrated navigation systems Modular structure for INS. Operational and performance requirements, methods of testing and required test results |
| CSA CEI/IEC 300.2 : 0 | DEPENDABILITY MANAGEMENT - PART 2: DEPENDABILITY PROGRAMME ELEMENTS AND TASKS |
| NF EN 50495 : 2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| BS EN 60300-2:2004 | Dependability management Guidelines for dependability management |
| 08/30169896 DC : 0 | BS EN 61907 - GUIDANCE ON COMMUNICATION NETWORK DEPENDABILITY ENGINEERING |
| BS ISO 16142-1:2016 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
| 14/30290166 DC : 0 | BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| PD IEC TR 62059-21:2002 | Electricity metering equipment. Dependability Collection of meter dependability data from the field |
| CEI 56-42 : 2000 | DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 9: RISK ANALYSIS OF TECHNOLOGICAL SYSTEMS |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 62508:2010 | Guidance on human aspects of dependability |
| 17/30329294 DC : 0 | BS ISO 20780 - SPACE SYSTEMS - FIBER OPTIC COMPONENTS - DESIGN AND VERIFICATION REQUIREMENTS |
| BS ISO 8468:2007 | Ships and marine technology. Ship\'s bridge layout and associated equipment. Requirements and guidelines |
| 02/400715 DC : DRAFT SEP 2002 | BS IEC 60300-2 - DEPENDABILITY MANAGEMENT - PART 2: GUIDELINES FOR DEPENDABILITY MANAGEMENT |
| 04/30101036 DC : DRAFT AUG 2004 | IEC 61025 - FAULT TREE ANALYSIS (FTA) |
| BS EN 60300-3-15:2009 | Dependability management Application guide. Engineering of system dependability |
| 16/30335706 DC : 0 | BS ISO 12132 - PLAIN BEARINGS - QUALITY ASSURANCE OF THIN-WALLED HALF BEARINGS - DESIGN FMEA |
| CEI EN 60825-12 : 2005 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| API RP 17N : 2017 | RECOMMENDED PRACTICE ON SUBSEA PRODUCTION SYSTEM RELIABILITY, TECHNICAL RISK, AND INTEGRITY MANAGEMENT |
| BS ISO 21789:2009 | Gas turbine applications — Safety |
| 08/30193478 DC : DRAFT NOV 2008 | BS EN 61508-7 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
| CSA E61496.1 : 2004 : R2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| 04/30115151 DC : DRAFT JUNE 2004 | ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| IEC 60300-3-11:2009 | Dependability management - Part 3-11: Application guide - Reliability centred maintenance |
| 07/30090385 DC : 0 | ISO 13408-1 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| CSA ISO/IEC 16085 : 2007 : R2017 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
| SAE ARP 5580 : 2012 | RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS |
| NF EN 60044-8 : 2006 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSDUCERS |
| CSA C60044-8 :2007 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
| IEEE 1827-2016 | IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
| SAE JA 1005 : 2012 | SOFTWARE SUPPORTABILITY PROGRAM IMPLEMENTATION GUIDE |
| IEC TR 80002-1:2009 | Medical device software - Part 1: Guidance on the application of ISO 14971 to medical device software |
| IEC TR 61838:2009 | Nuclear power plants - Instrumentation and control important to safety - Use of probabilistic safety assessment for the classification of functions |
| ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| I.S. EN 61162-460:2015 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 460: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION - SAFETY AND SECURITY |
| I.S. EN 60825-12:2004 | SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
| I.S. EN 16991:2018 | RISK-BASED INSPECTION FRAMEWORK |
| I.S. EN 62619:2017 | SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR SECONDARY LITHIUM CELLS AND BATTERIES, FOR USE IN INDUSTRIAL APPLICATIONS |
| I.S. EN 62673:2013 | METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE (IEC 62673:2013 (EQV)) |
| I.S. EN 60706-2:2006 | MAINTAINABILITY OF EQUIPMENT - PART 2: MAINTAINABILITY REQUIREMENTS AND STUDIES DURING THE DESIGN AND DEVELOPMENT PHASE |
| I.S. EN ISO 20815:2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
| I.S. EN 61025:2007 | FAULT TREE ANALYSIS (FTA) |
| ISO 19372:2015 | Microturbines applications — Safety |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| ASTM E 2352 : 2004 : R2010 | Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations |
| BS EN ISO 14971:2012 | Medical devices. Application of risk management to medical devices |
| IEC 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| ISO/IEC 16085:2006 | Systems and software engineering — Life cycle processes — Risk management |
| S.R. CLC/TR 50126-2:2007 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 2: GUIDE TO THE APPLICATION OF EN 50126-1 FOR SAFETY |
| ISO 21789:2009 | Gas turbine applications — Safety |
| IEC 61078:2016 | Reliability block diagrams |
| I.S. EN 14594:2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| I.S. EN 60300-3-12:2011 | DEPENDABILITY MANAGEMENT - PART 3-12: APPLICATION GUIDE - INTEGRATED LOGISTIC SUPPORT |
| DIN EN ISO 14644-5:2005-03 | Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004) |
| DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| IEC 60300-3-15:2009 | Dependability management - Part 3-15: Application guide - Engineering of system dependability |
| ISO 14644-5:2004 | Cleanrooms and associated controlled environments — Part 5: Operations |
| IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| UNE-EN 60300-3-12:2014 | Dependability management - Part 3-12: Application guide - Integrated logistic support |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| IEC 62506:2013 | Methods for product accelerated testing |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| CSA N290.14 : 2015 | QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS |
| EEMUA 222 : 2009 | GUIDE TO THE APPLICATION OF IEC 61511 TO SAFETY INSTRUMENTED SYSTEMS IN THE UK PROCESS INDUSTRIES |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| EN ISO 14698-1:2003 | Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003) |
| UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
| UNI CEN ISO/TS 22367 : 2010 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
| UNI EN ISO 13849-2 : 2013 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| EN 31010:2010 | Risk management - Risk assessment techniques |
| UNI ISO 13379 : 2010 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES |
| BS ISO 18322:2017 | Space systems. General management requirements for space test centres |
| PD ISO/TR 16335:2013 | Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification |
| 16/30337806 DC : 0 | BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF) |
| 04/30105027 DC : DRAFT JUNE 2004 | ISO 21789 - GAS TURBINES - SAFETY |
| CEI EN 60044-8 : 2004 | INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRASFORMERS |
| 15/30310506 DC : 0 | BS EN 61078 - RELIABILITY BLOCK DIAGRAMS |
| AAMI/IEC TIR80002-1:2009 | MEDICAL DEVICE SOFTWARE - PART 1: GUIDANCE ON THE APPLICATION OF ISO 14971 TO MEDICAL DEVICE SOFTWARE |
| BS ISO 16142-2:2017 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| PREN ISO 13849-2 : DRAFT 2010 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| UNE-EN 62282-3-1:2011 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| BS EN 62282-3-1:2007 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| BS EN 61508-7:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures |
| 10/30230297 DC : 0 | BS ISO/IEC 15026-3 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE ASSURANCE - PART 3: SYSTEM INTEGRITY LEVELS |
| 11/30251566 DC : 0 | BS EN 62628 - GUIDANCE ON SOFTWARE ASPECTS OF DEPENDABILITY |
| 08/30182164 DC : DRAFT MAY 2008 | BS ISO 31000 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES ON IMPLEMENTATION |
| 07/30144132 DC : 0 | BS EN 60300-3-11 - DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTERED MAINTENANCE |
| PREN 50126-1 : DRAFT 2015 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| BS PD IEC/TR 62662 : 2010 | GUIDANCE FOR PRODUCTION, TESTING AND DIAGNOSTICS OF POLYMER INSULATORS WITH RESPECT TO BRITTLE FRACTURE OF CORE MATERIALS |
| BS EN 62551:2012 | Analysis techniques for dependability. Petri net techniques |
| 16/30339594 DC : DRAFT DEC 2016 | BS EN 50129 - RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| DD IEC/PAS 62282-6-150:2011 | Fuel cell technologies Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| BS EN 61165:2006 | Application of Markov techniques |
| BS IEC 61497:1998 | Nuclear power plants. Electrical interlocks for functions important to safety. Recommendations for design and implementation |
| BS EN 60601-1-4:1997 | Medical electrical equipment. General requirements for safety Collateral standard. General requirements for programmable electrical medical systems |
| I.S. EN 62402:2007 | OBSOLESCENCE MANAGEMENT - APPLICATION GUIDE |
| BS EN 61014:2003 | Programmes for reliability growth |
| 07/30144128 DC : 0 | BS EN 60300-3-15 - DEPENDABILITY MANAGEMENT - PART 3-15: GUIDANCE TO ENGINEERING OF SYSTEM DEPENDABILITY |
| BS IEC 60987:2007 | Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems |
| BS EN 61025:2007 | Fault tree analysis (FTA) |
| 10/30200372 DC : 0 | BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| UNE-EN 61882:2017 | Hazard and operability studies (HAZOP studies) - Application guide |
| CEI EN 60300-3-15 : 2011 | DEPENDABILITY MANAGEMENT - PART 3-15: APPLICATION GUIDE - ENGINEERING OF SYSTEM DEPENDABILITY |
| BS EN 61882:2016 | Hazard and operability studies (HAZOP studies). Application guide |
| BS IEC 61226 : 2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS |
| NF EN 61014 : 2003 | PROGRAMMES FOR RELIABILITY GROWTH |
| 15/30309554 DC : 0 | BS EN 61882 - HAZARD AND OPERABILITY STUDIES (HAZOP STUDIES) - APPLICATION GUIDE |
| BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| BS EN 61162-460:2015 | Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ethernet interconnection. Safety and security |
| CEI EN 60300-3-4 : 2010 | DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS |
| I.S. EN 61427-2:2015 | SECONDARY CELLS AND BATTERIES FOR RENEWABLE ENERGY STORAGE - GENERAL REQUIREMENTS AND METHODS OF TEST - PART 2: ON-GRID APPLICATIONS |
| 01/208612 DC : DRAFT NOV 2001 | IEC 60825-2 ED.3 - SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS |
| BS EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
| EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| I.S. EN 31010:2010 | RISK MANAGEMENT - RISK ASSESSMENT TECHNIQUES (IEC/ISO 31010:2009 (EQV)) |
| 01/122934 DC : DRAFT AUG 2001 | BS EN ISO 14644-5 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 5: OPERATIONS |
| 12/30263521 DC : 0 | BS EN 62673 - METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE |
| 16/30297787 DC : 0 | BS ISO 16079-1 - CONDITION MONITORING AND DIAGNOSTICS OF WIND TURBINES - PART 1: GENERAL GUIDELINES |
| BS ISO 13372:2012 | Condition monitoring and diagnostics of machines. Vocabulary |
| DD ISO/TS 22367 : 2008 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
| PD IEC/TR 80002-1:2009 | Medical device software Guidance on the application of ISO 14971 to medical device software |
| BS EN 62628:2012 | Guidance on software aspects of dependability |
| BS EN 60300-3-14:2004 | Dependability management Application guide - Maintenance and maintenance support |
| UNI CEI EN ISO 14971 : 2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| BS EN 60300-3-2:2005 | Dependability management Application guide. Collection of dependability data from the field |
| 01/712575 DC : DRAFT SEP 2001 | ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION |
| IEC TR 62059-21:2002 | Electricity metering equipment - Dependability - Part 21: Collection of meter dependability data from the field |
| 04/30086349 DC : DRAFT APR 2004 | EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 09/30169892 DC : 0 | BS EN 62502 - ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS |
| AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| IEC TR 63039:2016 | Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state |
| BS EN 60300-3-1:2004 | Dependability management. Application guide Analysis techniques for dependability. Guide on methodology |
| ISO 12132:2017 | Plain bearings Quality assurance of thin-walled half bearings Design FMEA |
| AAMI ISO 13408-1:2008 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| PREN 17141 : DRAFT 2017 | CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL |
| CSA C22.2 No. 60601.1.4 : 2002 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
| AAMI ISO 14971 : 2007 : R2010 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| ISA TR12.21.01 : 2004 | USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS |
| I.S. EN 61907:2010 | COMMUNICATION NETWORK DEPENDABILITY ENGINEERING |
| CEI CLC/TR 62662 : 2012 | GUIDANCE FOR PRODUCTION, TESTING AND DIAGNOSTICS OF POLYMER INSULATORS WITH RESPECT TO BRITTLE FRACTURE OF CORE MATERIALS |
| API 691 : 2017 | RISK-BASED MACHINERY MANAGEMENT |
| I.S. EN 61014:2003 | PROGRAMMES FOR RELIABILITY GROWTH |
| IEEE C37.10-2011 REDLINE | IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures |
| IEEE/ISO/IEC 16085-2006 | ISO/IEC/IEEE International Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management |
| EN 61078 : 1991 | RELIABILITY BLOCK DIAGRAMS (IEC 61078:2016) |
| I.S. EN 61069-5:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY |
| UNI EN ISO 20815 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
| I.S. EN 61226:2010 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| ISO 17359:2018 | Condition monitoring and diagnostics of machines — General guidelines |
| I.S. EN 62502:2010 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA) |
| S.R. CWA 15740:2008 | RISK-BASED INSPECTION AND MAINTENANCE PROCEDURES FOR EUROPEAN INDUSTRY (RIMAP) |
| ISO 18322:2017 | Space systems — General management requirements for space test centres |
| ISO 13379:2003 | Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques |
| CEI EN 61078 : 2006 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - RELIABILITY BLOCK DIAGRAM AND BOOLEAN METHODS |
| CEI EN 62673 : 2014 | METHODOLOGY FOR COMMUNICATION NETWORK DEPENDABILITY ASSESSMENT AND ASSURANCE |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CEI EN 61025 : 2007 | FAULT TREE ANALYSIS (FTA) |
| EN 14594:2018 | Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking |
| ISO 13381-1:2015 | Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines |
| EN ISO 20815:2010 | Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15) |
| I.S. EN ISO 15378:2017 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017) |
| IEC TR 62662:2010 | Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials |
| IEC 60987:2007+AMD1:2013 CSV | Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
| I.S. EN 62308:2006 | EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS |
| IEC 60300-3-10:2001 | Dependability management - Part 3-10: Application guide - Maintainability |
| S.R. CWA 15929:2009 | BEST PRACTICES FOR THE DESIGN AND DEVELOPMENT OF CRITICAL INFORMATION SYSTEMS |
| IEC 60860:2014 | Radiation protection instrumentation - Warning equipment for criticality accidents |
| 12/30228018 DC : 0 | BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| UNE-EN 62429:2012 | Reliability growth - Stress testing for early failures in unique complex systems |
| IEC 61907:2009 | Communication network dependability engineering |
| BS EN ISO 14644-5:2004 | Cleanrooms and associated controlled environments Operations |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| BS EN 12445:2001 | Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| IEC 62402:2007 | Obsolescence management - Application guide |
| 11/30242646 DC : DRAFT FEB 2011 | BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| IEC 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| ISO 14698-1:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| BS ISO 19372:2015 | Microturbines applications. Safety |
| BS EN 1050:1997 | Safety of machinery. Principles for risk assessment |
| IEC 60706-2:2006 | Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase |
| IEC 62502:2010 | Analysis techniques for dependability - Event tree analysis (ETA) |
| IEC 61014:2003 | Programmes for reliability growth |
| IEC 60601-1-4:1996+AMD1:1999 CSV | Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems |
| IEC 62628:2012 | Guidance on software aspects of dependability |
| IEC 62282-6-100:2010+AMD1:2012 CSV | Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety |
| IEC TS 62933-5-1:2017 | Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification |
| UNE-EN 62282-5-1:2013 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| IEC 62198:2013 | Managing risk in projects - Application guidelines |
| IEC 60300-3-1:2003 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| IEC 60300-3-14:2004 | Dependability management - Part 3-14: Application guide - Maintenance and maintenance support |
| 10/30173705 DC : DRAFT SEP 2010 | BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| CEI EN 50129 : 2004 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
| 04/30089617 DC : DRAFT MARCH 2004 | |
| BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
| 16/30332627 DC : 0 | BS EN 62932-2-2 ED 1.0 - FLOW BATTERY SYSTEMS FOR STATIONARY APPLICATIONS - PART 2-2: SAFETY REQUIREMENTS |
| IEC 60300-2:2004 | Dependability management - Part 2: Guidelines for dependability management |
| IEC 61226:2009 | Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions |
| BS EN ISO 13849-1:2015 | Safety of machinery. Safety-related parts of control systems General principles for design |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| IEC 61427-2:2015 | Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications |
| 16/30351274 DC : 0 | BS EN 62933-5-1 - ELECTRICAL ENERGY STORAGE (ESS) SYSTEMS - PART 5-1: SAFETY CONSIDERATIONS RELATED TO GRID INTEGRATED ELECTRICAL ENERGY STORAGE (EES) SYSTEMS |
| UNE-EN ISO 13849-1:2016 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| IEC 61165:2006 | Application of Markov techniques |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN 62502 : 2010 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - EVENT TREE ANALYSIS (ETA) |
| DIN EN ISO 80079-36:2016-12 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
| EN ISO 14644-5:2004 | Cleanrooms and associated controlled environments - Part 5: Operations (ISO 14644-5:2004) |
| EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
| EN ISO 13408-1:2015 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 1441 : 1997 | MEDICAL DEVICES - RISK ANALYSIS |
| I.S. EN 50126-1:2017 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| RG.AERO 000721 : 2016 | GENERAL RECOMMENDATIONS FOR THE BIT ARCHITECTURE IN AN INTEGRATED SYSTEM |
| CEI EN 60300-3-14 : 2005 | DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT |
| BS IEC 63147:2017 | Criteria for accident monitoring instrumentation for nuclear power generating stations |
| NF EN 60300-3-11 : 2010 | DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| BS IEC 60300-3.6 : 1997 | DEPENDABILITY MANAGEMENT - APPLICATION GUIDE - SOFTWARE ASPECTS OF DEPENDABILITY |
| UNE-EN 60300-3-4:2011 | Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements |
| NF EN 50156-2 : 2016 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
| IEC TR 62987:2015 | Nuclear power plants - Instrumentation and control systems important to safety - Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems |
| CEI EN 60300-3-1 : 2005 | DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| 14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| UNI ISO 13379-1 : 2012 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES - PART 1: GENERAL GUIDELINES |
| I.S. EN 62940:2017 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - INTEGRATED COMMUNICATION SYSTEM (ICS) - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 14593-1:2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING DEVICES WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING |
| BS ISO/IEC 15026-1:2013 | Systems and software engineering. Systems and software assurance Concepts and vocabulary |
| I.S. EN ISO 13408-1:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
| BIS IS 15474-3-11 : 2014 | DEPENDABILITY MANAGEMENT - PART 3: APPLICATION GUIDE - SECTION 11: RELIABILITY CENTRED MAINTENANCE |
| 10/30238615 DC : DRAFT NOV 2010 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| S.R. CEN ISO TS 22367:2010 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
| 05/30133969 DC : DRAFT MAY 2005 | |
| PD ISO/TS 17929:2014 | Biomechanical effects on amusement ride passengers |
| BS IEC 61882:2001 | Hazard and operability studies (HAZOP studies). Application guide |
| ISO/IEC 15026-1:2013 | Systems and software engineering Systems and software assurance Part 1: Concepts and vocabulary |
| BS EN 60300-3-11:2009 | Dependability management Application guide. Reliability centred maintenance |
| BS EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| 14/30298031 DC : 0 | BS EN 61069-5 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY |
| S.R. CLC/TR 62662:2011 | GUIDANCE FOR PRODUCTION, TESTING AND DIAGNOSTICS OF POLYMER INSULATORS WITH RESPECT TO BRITTLE FRACTURE OF CORE MATERIALS (IEC/TR 62662:2010) |
| BS 5760-5:1991 | Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA) |
| 03/108624 DC : DRAFT JULY 2003 | IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD |
| 15/30330403 DC : 0 | BS EN 50126-1 - RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) - PART 1: GENERIC RAMS PROCESS |
| 04/30079743 DC : DRAFT APR 2004 | ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
| BS EN 62940:2017 | Maritime navigation and radiocommunication equipment and systems. Integrated communication system (ICS). Operational and performance requirements, methods of testing and required test results |
| 17/30329441 DC : 0 | BS EN 17141 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL |
| 96/124833 DC : DRAFT SEP 1996 | BS EN ISO 14698-1 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - BIOCONTAMINATION CONTROL - PART 1: GENERAL PRINCIPLES |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BS EN 60300-3-4:2008 | Dependability management Application guide. Guide to the specification of dependability requirements |
| IEC TS 62941:2016 | Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval |
| CSA ISO 14971 : 2007 : R2017 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 14971 : 2007 : R2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| ASTM D 7874 : 2013 | Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing |
| ISO/TS 18667:2018 | Space systems — Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management |
| API 689 : 2007 | COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
| CSA Q634 : M91 | RISK ANALYSIS REQUIREMENTS & GUIDELINES |
| IEEE 1679-2010 | IEEE Recommended Practice for the Characterization and Evaluation of Emerging Energy Storage Technologies in Stationary Applications |
| IEEE/ISO/IEC 15026-1-2014 | IEEE Standard Adoption of ISO/IEC 15026-1--Systems and Software Engineering--Systems and Software Assurance--Part 1: Concepts and Vocabulary |
| ISO 20815:2008 | Petroleum, petrochemical and natural gas industries Production assurance and reliability management |
| I.S. EN 61557-15:2014 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
| CSA C22.2 No. 62282-2 :2007 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 60300-3-4:2008 | DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS |
| I.S. EN 50495:2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
| I.S. EN 62198:2014 | MANAGING RISK IN PROJECTS - APPLICATION GUIDELINES |
| I.S. EN 62429:2008 | RELIABILITY GROWTH - STRESS TESTING FOR EARLY FAILURES IN UNIQUE COMPLEX SYSTEMS |
| EN 14593-1:2018 | Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking |
| I.S. EN 60300-3-1:2004 | DEPENDABILITY MANAGEMENT - PART 3-1: APPLICATION GUIDE - ANALYSIS TECHNIQUES FOR DEPENDABILITY - GUIDE ON METHODOLOGY |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| IEC 60300-3-9:1995 | Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems |
| I.S. EN 61496-1:2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS |
| IEC TS 62600-2:2016 | Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems |
| I.S. EN 60300-3-14:2004 | DEPENDABILITY MANAGEMENT - PART 3-14: APPLICATION GUIDE - MAINTENANCE AND MAINTENANCE SUPPORT |
| S.R. CR 954-100:1999 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 100: GUIDE ON THE USE AND APPLICATION OF EN 954-1:1996 |
| EN 62282-6-100:2010/A1:2012 | FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012) |
| DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| IEC 62551:2012 | Analysis techniques for dependability - Petri net techniques |
| IEC 62429:2007 | Reliability growth - Stress testing for early failures in unique complex systems |
| ISO/TS 22367:2008 | Medical laboratories Reduction of error through risk management and continual improvement |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| IEC 62308:2006 | Equipment reliability - Reliability assessment methods |
| 16/30354067 DC : 0 | BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| IEC 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| BS EN 60825-2 : 2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
| 12/30236742 DC : 0 | BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS |
| BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| BS EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| IEC 62282-3-1:2007 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| IEC 60300-3-12:2011 | Dependability management - Part 3-12: Application guide - Integrated logistic support |
| IEC 60300-3-4:2007 | Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements |
| CEN ISO/TS 22367:2010 | Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) |
| EN 62551 : 2012 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012) |
| EN 61069-5:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability |
| CEN/TS 13763-27:2003 | Explosives for civil uses - Detonators and relays - Part 27: Definitions, methods and requirements for electronic initiation systems |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 60300-3-14:2004 | Dependability management - Part 3-14: Application guide - Maintenance and maintenance support |
| EN 60300-3-11 : 2009 | DEPENDABILITY MANAGEMENT - PART 3-11: APPLICATION GUIDE - RELIABILITY CENTRED MAINTENANCE |
| EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
| EN 62628:2012 | Guidance on software aspects of dependability |
| EN 60300-3-1:2004 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems |
| EN 60300-2:2004 | Dependability management - Part 2: Guidelines for dependability management |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 61427-2:2015 | Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications |
| EN 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| EN 62198:2014 | Managing risk in projects - Application guidelines |
| EN 60706-2:2006 | Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| EN 61165:2006 | Application of Markov techniques |
| EN 62508 : 2010 | GUIDANCE ON HUMAN ASPECTS OF DEPENDABILITY |
| EN 61014:2003 | Programmes for reliability growth |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| SAE ARP 5580 : 2012 | RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS |
| AS 4024.1100:2019 | Safety of machinery Application guide |
| IEC 61160:2005 | Design review |
| IEC 61078:2016 | Reliability block diagrams |
| IEC 61165:2006 | Application of Markov techniques |
| AS ISO 22367:2021 | Medical laboratories - Application of risk management to medical laboratories |
| AS/NZS IEC 31010:2020 | Risk management - Risk assessment techniques |
| SAE J 1739 : 2009 | POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA) |
| IEC 60300-3-1:2003 | Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology |
| IEC 60300-1:2014 | Dependability management - Part 1: Guidance for management and application |
| IEC 60300-3-11:2009 | Dependability management - Part 3-11: Application guide - Reliability centred maintenance |
| IEC 60300-2:2004 | Dependability management - Part 2: Guidelines for dependability management |
| IEC 60300-3-9:1995 | Dependability management - Part 3: Application guide - Section 9: Risk analysis of technological systems |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| BS 5760-5:1991 | Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.