IEC 60728-13-1:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
31-05-2023
Published date
27-07-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
IEC 60728-13-1:2017 is the precise description of an FTTH (fibre to the home) system for expanding broadband broadcast signal transmission from CATV services only, towards CATV plus broadcast satellite (BS) plus communication satellite (CS) services, additionally to other various signals such as data services.
This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition.
- Transmission frequency was expanded in order to achieve satellite signal for 4 K video service. The transmission frequency over FTTH would be 3 300 MHz.
- High signal modulation case like 16 APSK and 32 APSK was added in order to correspond to transmission for 4 K video service.
The contents of the corrigendum of September 2017 have been included in this copy.
| DevelopmentNote |
Stability Date: 2020. (08/2017)
|
| DocumentType |
Standard
|
| ISBN |
978-2-8322-9341-6
|
| Pages |
64
|
| ProductNote |
THIS STANDARD IS ALSO REFERES TO ETSI 300019-1-4,ETSI EN 302307
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| CEI EN 60728-13-1 : 2013 | Identical |
| EN 60728-13-1:2017 | Identical |
| BS EN 60728-13-1:2012 | Identical |
| UNE-EN 60728-13-1:2017 | Identical |
| BS EN 60728-13-1:2017 | Identical |
| PNE-prEN 60728-13-1:2016 | Identical |
| NEN EN IEC 60728-13-1 : 2017 | Identical |
| EN 60728-13-1:2012 | Identical |
| NBN EN 60728-13-1 : 2012 | Identical |
| VDE 0855-13-1 : 2018 | Identical |
| PN EN 60728-13-1 : 2013 AC 2013 | Identical |
| DIN EN 60728-13-1 : 2018 | Identical |
| EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
| BS EN 60728-14:2014 | Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology |
| I.S. EN 60728-14:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
| IEC 60728-14:2014 | Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology |
| NF EN 60728-14 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC 60050-702:1992 | International Electrotechnical Vocabulary (IEV) - Part 702: Oscillations, signals and related devices |
| IEC 60050-731:1991 | International Electrotechnical Vocabulary (IEV) - Part 731: Optical fibre communication |
| IEC 61280-1-3:2010 | Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement |
| IEC 61300-3-2:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device |
| IEC 60728-13:2010 | Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC TR 61292-4:2014 | Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers |
| IEC 60050-721:1991 | International Electrotechnical Vocabulary (IEV) - Part 721: Telegraphy, facsimile and data communication |
| IEC 61290-1-3:2015 | Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method |
| IEC 60728-101:2016 | Cable networks for television signals, sound signals and interactive services - Part 101: System performance of forward paths loaded with digital channels only |
| IEC 60728-6:2011 | Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment |
| IEC 60728-3:2010 | Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks |
| IEC 61280-2-9:2009 | Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| IEC 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| IEC TR 60728-6-1:2006 | Cable networks for television signals, sound signals and interactive services - Part 6-1: System guidelines for analogue optical transmission systems |
| IEC 60728-1-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks |
| IEC 60728-2:2010 | Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
| IEC 61280-1-1:2013 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| IEC TR 61930:1998 | Fibre optic graphical symbology |
| IEC 60728-5:2015 | Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
| IEC 61754-13:2006 | Fibre optic connector interfaces - Part 13: Type FC-PC connector |
| IEC TR 61931:1998 | Fibre optic - Terminology |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61280-2-2:2012 | Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement |
| IEC 61291-1:2012 | Optical amplifiers - Part 1: Generic specification |
| IEC 60874-14-2:1997 | Connectors for optical fibres and cables - Part 14-2: Detail specification for fibre optic connector type SC/PC tuned terminated to single-mode fibre type B1 |
| IEC 60728-1-2:2014 | Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation |
| EN 300 019-1-4 : 2.2.1 | ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-4: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS |
| IEC 61281-1:1999 | Fibre optic communication subsystems - Part 1:Generic specification |
| EN 302 307 : 1.3.1 | DIGITAL VIDEO BROADCASTING (DVB); SECOND GENERATION FRAMING STRUCTURE, CHANNEL CODING AND MODULATION SYSTEMS FOR BROADCASTING, INTERACTIVE SERVICES, NEWS GATHERING AND OTHER BROADBAND SATELLITE APPLICATIONS (DVB-S2) |
| IEC 61290-1-2:2005 | Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method |
| IEC 60875-1:2015 | Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
| IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| IEC 61755-1:2005 | Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.