IEC 60651:1979+AMD1:1993+AMD2:2000 CSV
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Sound level meters
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
16-04-2003
Superseded by
Language(s)
English - French
Published date
25-10-2001
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
1.1 General
1.2 Types
1.3 Tolerances
1.4 Characteristics specified
1.5 Tests specified
2 Object and general requirements
2.1 Object
2.2 Applications
2.3 Weighting characteristics
2.4 Optional features
2.5 Method of use
3 Definitions
4 General characteristics
5 Directional characteristics of the microphone and
instrument case
6 Frequency
7 Detector and indicator characteristics
8 Sensitivity to various environments
9 Calibration and verification of the basic
characteristics of the sound level meter
10 Provision for use with auxiliary equipment
11 Rating information and instruction manual
12 Electromagnetic and electrostatic compatibility
requirements and test procedures
12.1 Field of application
12.2 Emission limits
12.3 Electrostatic discharges
12.4 Immunity to power- and radio-frequency fields
and conducted disturbances
12.5 Test procedures
Appendix A Tests of the overload and detection
characteristics
Appendix B Diffuse field sensitivity
Appendix C Theoretical response to tone bursts
Appendix D (normative) Equations for design-goal
frequency weightings
Appendix E (informative) Emission limits
Figures
Deals with sound level meters of four degrees of precision, designated Types 0, 1, 2 and 3. Specifies the following characteristics: directional characteristics, frequency weighting characteristics, time-weighting, detector and indicator characteristics, sensitivity to various environments. Establishes electrical and acoustical tests to verify compliance with characteristics specified and describes the method for absolute sensitivity calibration. This standard supersedes IEC 60123 and IEC 60179.
| DevelopmentNote |
Supersedes IEC 60123 (03/2001) Also numbered as BS EN 60651. (10/2001)
|
| DocumentType |
Standard
|
| Pages |
77
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 60651 : 94 AMD 2 2001 | Identical |
| HD 425 : 200S1 | Identical |
| NFS 31 009 : CORRIGENDUM 87 | Similar to |
| NBN EN 146 : 1992 | Identical |
| NBN EN 269 : 1994 | Identical |
| NBN EN 25136 : 1995 | Identical |
| NBN EN 27182 : 1992 | Identical |
| NBN EN 24869-1 : 1995 | Identical |
| NBN EN 12419 : 1999 | Identical |
| NBN EN 12941 : 1998 AMD 2 2009 | Identical |
| NBN C 97 122 : 1983 | Identical |
| NEN EN IEC 60651 : 94 AMD 2 2001 | Identical |
| NEN 10651 : 94 AMD 1 1994 | Identical |
| I.S. EN 60651:1994 | Identical |
| SN EN 60651 : 1994 AMD 2 2001 | Identical |
| CEI EN 60651 : 3ED 2002 | Identical |
| EN 60651:1994/A2:2001 | Identical |
| DIN EN 60651 : 1994 AMD 2 2003 | Identical |
| DIN IEC 60651:1981-12 | Identical |
| UNE 20464:1990 | Identical |
| NFS 31 109 : 1991 | Similar to |
| BS 5969:1981 | Identical |
| BS 7189:1989 | Specification for sound calibrators |
| CSA C22.2 No. 601.2.33 : 0 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL DIAGNOSIS |
| 02/562586 DC : DRAFT JUN 2002 | BS EN 60601-1-8 - MEDICAL ELECTRICAL EQUIPMENT - PART 8-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - ALARM SYSTEMS - REQUIREMENTS, TEST AND GUIDELINES - GENERAL REQUIREMENTS AND GUIDELINES FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND IN MEDICAL ELECTRICAL SYSTEMS |
| 05/30134086 DC : DRAFT MAY 2005 | IEC 61996-2 ED1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 2: SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) PERFORMANCE REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 1454:1998 | PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
| I.S. EN ISO 5840:2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| I.S. EN ISO 3382:2000 | ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS |
| 02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| 14/30270462 DC : 0 | BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
| ISO 9568:1993 | Cinematography — Background acoustic noise levels in theatres, review rooms and dubbing rooms |
| BS EN ISO 5840-2:2015 | Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes |
| I.S. EN 1835:2000 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| NF EN 60601-1-8 : 2007 AMD 11 2018 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-8: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: GENERAL REQUIREMENTS, TESTS AND GUIDANCE FOR ALARM SYSTEMS IN MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS |
| BS EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology General method for \'one package equipment\' |
| AES 20 : 1996(R2007) | |
| ISO 9611:1996 | Acoustics — Characterization of sources of structure-borne sound with respect to sound radiation from connected structures — Measurement of velocity at the contact points of machinery when resiliently mounted |
| 05/30127351 DC : DRAFT JAN 2005 | |
| BS EN 61252 : 1997 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| CSA Z168.11 : 0 | VACUUM DEVICES USED FOR SUCTION AND DRAINAGE |
| TBR 038 : 20001 | PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - ATTACHMENT REQUIREMENTS FOR A TERMINAL EQUIPMENT INCORPORATING AN ANALOGUE HANDSET FUNCTION CAPABLE OF SUPPORTING THE JUSTIFIED CASE SERVICE WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN IN EUROPE |
| 06/30154548 DC : DRAFT AUG 2006 | EN 60601-2-19 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-19: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF BABY INCUBATORS |
| NF EN 61481 : 2001 AMD 2 2005 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C. |
| SAE J 1470 : 2013 (R2018) | MEASUREMENT OF NOISE EMITTED BY ACCELERATING HIGHWAY VEHICLES |
| BS ISO 3744 : 1994 AMD 8936 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHOD IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| CEI EN 60045-1 : 1996 | STEAM TURBINES - PART 1: SPECIFICATIONS |
| BS 4196-4:1981 | Sound power levels of noise sources Engineering methods for determination of sound power levels for sources in free-field conditions over a reflecting plane |
| BS ISO 10494:1993 | Gas turbines and gas turbine sets. Measurement of emitted airborne noise. Engineering/survey method |
| 07/30166815 DC : 0 | BS EN 60068-2-65 AMD1 - ENVIRONMENTAL TESTING - PART 2-65: METHODS OF TEST - TEST FG - VIBRATION, ACOUSTICALLY INDUCED |
| 01/200684 DC : DRAFT FEB 2001 | |
| BS PAS 41(2003) : 2003 | DIRECTIONAL SOUNDERS - REQUIREMENTS AND TESTS |
| ANSI S12.36 : 0 | SURVEY METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES |
| BS ISO 362:1998 | Acoustics. Measurement of noise emitted by accelerating road vehicles. Engineering method |
| 06/30154556 DC : DRAFT AUG 2006 | EN 60601-2-20 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-20: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF TRANSPORT INCUBATORS |
| UNI ISO 1996-2 : 2010 | ACOUSTICS - DESCRIPTION, MEASUREMENT AND ASSESSMENT OF ENVIRONMENTAL NOISE - PART 2: DETERMINATION OF ENVIRONMENTAL NOISE LEVELS |
| AAMI ID26:2004 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| BS ISO 13475-1:1999 | Acoustics. Stationary audible warning devices used outdoors Field measurements for determination of sound emission quantities |
| ASTM F 1464 : 1993 : R1999 | Standard Specification for Oxygen Concentrators for Domiciliary Use |
| AAMI DF80 : 2003 : R2010 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS] |
| ANSI S12.35:1990(R1996) | PRECISION METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES IN ANECHOIC AND HEMI-ANECHOIC ROOMS |
| 01/200972 DC : DRAFT FEB 2001 | IEC 61243-1 ED.2 - LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| 02/107764 DC : DRAFT DEC 2002 | ISO 18652 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - EXTERNAL VIBRATORS FOR CONCRETE |
| BIS IS/ISO 10079-3 : 1999 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE |
| BS EN 61481:2001 | Live working. Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. |
| BS ISO 230-5:2000 | Test code for machine tools Determination of the noise emission |
| CSA Z10079.1 : 2003 : R2013 | MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 15657-1 : 2009 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE |
| BIS IS 7194 : 1994(R2002) | ASSESSMENT OF NOISE EXPOSURE DURING WORK FOR HEARING CONSERVATION PURPOSE |
| CSA C61400-11 : 2007 : R2012 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| CEI 22-4 : 1997 | STABILIZED POWER SUPPLIES, D.C. OUTPUT - PART 2: RATING AND PERFORMANCE |
| ISO 4412-2:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors |
| ISO 1996-3:1987 | Acoustics Description and measurement of environmental noise Part 3: Application to noise limits |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61183:1995 | ELECTROACOUSTICS - RANDOM-INCIDENCE AND DIFFUSE-FIELD CALIBRATION OF SOUND LEVEL METERS |
| ANSI S1.42 : 2001 : R2006 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| I.S. EN 60551:1993 | DETERMINATION OF TRANSFORMER AND REACTOR SOUND LEVELS |
| I.S. EN 50332-1:2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR ONE PACKAGE EQUIPMENT |
| I.S. EN 15657-1:2009 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
| ISO 13325:2003 | Tyres Coast-by methods for measurement of tyre-to-road sound emission |
| ANSI S12.43 : 1997 : R2007 | METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS |
| I.S. EN 60945:2002 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| I.S. EN 61248-1:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| ANSI S12.18 : 1994 | PROCEDURES FOR OUTDOOR MEASUREMENT OF SOUND PRESSURE LEVEL |
| CEI EN 60244-1 : 2000 | METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS - PART 1: GENERAL CHARACTERISTICS FOR BROADCAST TRANSMITTERS |
| ANSI/ASA S12.53 PART 2 : 1999(R2015) | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| CEI EN 60315-7 : 1997 | METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 7: METHODS OF MEASUREMENT ON DIGITAL SATELLITE RADIO (DSR) RECEIVERS |
| ANSI S12.19 : 1996 : R2011 | MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE |
| NF EN 62006 : 2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
| I.S. EN 61252:1996 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| ISO 4869-2:1994 | Acoustics Hearing protectors Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
| ASTM F 1464 : 1993 : R2005 | Standard Specification for Oxygen Concentrators for Domiciliary Use (Withdrawn 2014) |
| ISO 8579-1:2002 | Acceptance code for gear units — Part 1: Test code for airborne sound |
| I.S. EN ISO 3743-2:2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TESTS ROOMS |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| DIN EN ISO 10052:2010-10 | Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004 + Amd 1:2010) (includes Amendment A1:2010) |
| BS EN ISO 8359 : 2009 | OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS |
| BS EN ISO 11498:2000 | Dental handpieces. Dental low-voltage electric motors |
| BS EN ISO 11691:1997 | Acoustics. Measurement of insertion loss of ducted silencers without flow. Laboratory survey method |
| BS EN ISO 17201-2:2006 | Acoustics. Noise from shooting ranges Estimation of muzzle blast and projectile sound by calculation |
| BS EN ISO 3382:2000 | Acoustics. Measurement of the reverberation time of rooms with reference to other acoustical parameters |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| BS EN ISO 11957:2009 | Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements |
| BS EN ISO 3743-2:1997 | Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms |
| I.S. EN ISO 11691:2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
| EN 60645-2:1997 | Audiometers - Part 2: Equipment for speech audiometry |
| DIN EN ISO 11957:2010-01 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| EN 61329:1996 | Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production) |
| NF EN ISO 11691 : 2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
| EN 61043:1994 | Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones |
| DIN EN ISO 11691:2010-01 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009 |
| DIN ISO 230-5:2006-03 | Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000) |
| DIN EN 791:2010-01 | DRILL RIGS - SAFETY |
| BS 5839-9:2003 | Fire detection and alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems |
| DIN EN ISO 4871:2009-11 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 61096:1993/A1:1996 | METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS |
| EN 62121:2001 | Methods of measurement for minidisc recorders/players |
| EN 12094-12:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 12: Requirements and test methods for pneumatic alarm devices |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 60315-4:1998 | Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions |
| EN 12505:2000+A1:2009 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
| EN 61183:1994 | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
| BS EN ISO 7235:2009 | Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
| EN 50144-2-16:2003 | Safety of hand-held electric motor operated tools - Part 2-16: Particular requirements for tackers |
| I.S. EN ISO 11819-1:2002 | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1: STATISTICAL PASS-BY METHOD |
| XP I ETS 300245-7 : 99 XP | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 7: LOCALLY GENERATED INFORMATION TONES |
| BS ISO 9902:1993 | Textile machinery acoustics. Determination of sound pressure levels and sound power levels emitted by textile machines. Engineering and survey methods |
| 01/562316 DC : DRAFT JULY 2001 | BS EN ISO 7235 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| I.S. EN ISO 8359:2009 | OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS (ISO 8359:1996) |
| BS 7676-1:1993 | Acceptance code for gears Determination of airborne sound power levels emitted by gear units |
| NF EN 61063 : 2003 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY STEAM TURBINES AND DRIVEN MACHINERY |
| ISO 7188:1994 | Acoustics Measurement of noise emitted by passenger cars under conditions representative of urban driving |
| I.S. EN ISO 7785-1:1999 | DENTAL HANDPIECES - PART 1: HIGH-SPEED AIR TURBINE HANDPIECES |
| I.S. EN ISO 11498:1999 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRICAL MOTORS |
| XP I ETS 300245-5 : 99 XP | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 5: WIDEBAND (7 KHZ) HANDSET TELEPHONY |
| I.S. EN 270:1995 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HOOD - REQUIREMENTS, TESTING, MARKING |
| BS EN 60244-1:2000 | Methods of measurement for radio transmitters General characteristics for broadcast transmitters |
| CEI EN 61043 : 1998 | ELECTROACOUSTICS - INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY - MEASUREMENTS WITH PAIRS OF PRESSURE SENSING MICROPHONES |
| 04/30118161 DC : DRAFT AUG 2004 | ISO 22472 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR THE INSTALLATION AND OPERATION OF VOYAGE DATA RECORDER (VDR) |
| SAE J ISO 9533 : FEB 2003 | EARTH-MOVING MACHINERY - MACHINE-MOUNTED FORWARD AND REVERSE AUDIBLE WARNING ALARM - SOUND TEST METHOD |
| SAE J 184 : 2014 | QUALIFYING A SOUND DATA ACQUISITION SYSTEM |
| BS 6086:1981 | Method of measurement of noise inside motor vehicles |
| 95/541995 DC : DRAFT AUG 1995 | PREN ISO 12239 - SPECIFICATION FOR FIRE PROTECTION EQUIPMENT - SELF-CONTAINED SMOKE ALARMS |
| ANSI S12.19 : 1996 : R2006 | MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE |
| BS ISO 11819-1 : 97 AMD 13621 | ACOUSTICS - MEASUREMENT OF THE INFLUENCE OF ROAD SURFACES ON TRAFFIC NOISE - PART 1 - STATISTICAL PASS-BY METHOD |
| SAE J ISO 6396 : FEB 2003 | ACOUSTICS - MEASUREMENT AT THE OPERATORS POSITION OF NOISE EMITTED BY EARTH-MOVING MACHINERY - DYNAMIC TEST CONDITIONS |
| BS ISO 3743-1 : 1994 AMD 8937 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - COMPARISON METHOD FOR HARD WALLED TEST ROOMS |
| 06/19982093 DC : DRAFT AUG 2006 | |
| ISO 18738:2003 | Lifts (elevators) - Measurement of lift ride quality |
| CSA ISO 1996-2 : 2005 | ACOUSTICS - DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL NOISE - PART 2: ACQUISITION OF DATA PERTINENT TO LAND USE |
| DIN ISO 13472-1:2004-04 | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002) |
| NF ISO 18738 : 2003 | LIFTS (ELEVATORS) - MEASUREMENT OF LIFT RIDE QUALITY |
| BS EN 60315-4:1998 | Methods of measurement on radio receivers for various classes of emission Receivers for frequency-modulated sound broadcasting emissions |
| BS 6415:1983 | Specification for audio-frequency calibration tape for transverse track video recorders |
| BS 5108-1(1991) : AMD 7552 | SOUND ATTENUATION OF HEARING PROTECTORS - SUBJECTIVE METHOD OF MEASUREMENT |
| BS 4727-3:GRP08(1985) : 1985 | GLOSSARY OF ELECTROTECHNICAL POWER TELECOMMUNICATION ELECTRONICS LIGHTING & COLOUR TERMS - TERMS PARTICULAR TO TELECOMMUNICATIONS & ELECTRONICS - ACOUSTICS & ELECTROACOUSTICS TERMINOLOGY |
| BS EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results |
| BS EN 61606:1997 | Audio and audiovisual equipment. Digital audio parts. Basic methods of measurement of audio characteristics |
| 03/103026 DC : DRAFT JAN 2003 | BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| 08/30175518 DC : DRAFT SEP 2008 | BS EN 13141-2 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 2: EXHAUST AND SUPPLY AIR TERMINAL DEVICES |
| 03/303496 DC : DRAFT MAR 2003 | IEC 62252 ED. 1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - RADAR FOR CRAFT NOT IN COMPLIANCE WITH IMO SOLAS - CHAPTER 5: PERFORMANCE REQUIREMENTS METHODS OF TEST AND REQUIRED TEST RESULTS |
| AAMI ISO 5840 : 2005 : R2010 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| I.S. EN 61481:2001 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| AAMI ISO 5840 :2005 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| PD EN 14035-12:2003 | Fireworks Flash bangers and flash banger batteries. Specification and test methods |
| ANSI S12.10:2002(R2007) | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| CSA C61400-11 : 2007 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| BS EN 61204:1995 | Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements |
| TS 126 132 : 13.2.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; SPEECH AND VIDEO TELEPHONY TERMINAL ACOUSTIC TEST SPECIFICATION (3GPP TS 26.132 VERSION 14.1.0 RELEASE 14) |
| I.S. EN 60244-1:2000 | METHODS OF MEASUREMENT FOR RADIO TRANSMITTERS - PART 1: GENERAL CHARACTERISTICS FOR BROADCAST TRANSMITTERS |
| CEI EN 60945 : 2003 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| AAMI ISO 10079-1 : 1999 | MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN 50144-2-13:2002 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS |
| ANSI S12.44 : 1997 : R2012 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI/ASA S12.15 : 1992(R2016) | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
| BS EN ISO 10637:2000 | Dental equipment. High and medium volume suction systems |
| BS EN 60268-5 : 2003 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| I.S. EN ISO 5840-1:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015) |
| I.S. EN ISO 10052:2005 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| ISO 230-5:2000 | Test code for machine tools Part 5: Determination of the noise emission |
| I.S. EN 60268-5:2003 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| EG 202 518 : 1.4.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); ACOUSTIC OUTPUT OF TERMINAL EQUIPMENT; MAXIMUM LEVELS AND TEST METHODOLOGY FOR VARIOUS APPLICATIONS |
| ANSI S12.62 : 2012(R2017) | ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
| I.S. EN 61029-1:2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| NF EN 61400-11 : 2004 AMD 1 2006 | WIND TURBINE GENERATOR SYSTEMS - PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES |
| SAE J ISO 6395 : FEB 2003 | ACOUSTICS - MEASUREMENT OF EXTERIOR NOISE EMITTED BY EARTH-MOVING MACHINERY - DYNAMIC TEST CONDITIONS |
| NF EN 14035-4 : 2003 | FIREWORKS - PART 4: BANGER AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| ETS 300 176-2 : 20002 | DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) - APPROVAL TEST SPECIFICATION - SPEECH |
| SAE J ISO 7216 : FEB 2003 | ACOUSTICS - AGRICULTURAL AND FORESTRY WHEELED TRACTORS AND SELF-PROPELLED MACHINES - MEASUREMENT OF NOISE EMITTED WHEN IN MOTION |
| I.S. EN ISO 9612:2009 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| BS 6402:1983 | Specification for personal sound exposure meters |
| NF EN ISO 3743-2 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| EN 61260:1995/A1:2001 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
| IEC 60045-1:1991 | Steam turbines - Part 1: Specifications |
| I.S. EN 60094-3:1999 | MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 3: METHODS OF MEASURING THE CHARACTERISTICS OF RECORDING AND REPRODUCING EQUIPMENT FOR SOUND ON MAGNETIC TAPE |
| BS EN ISO 140-6:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of impact sound insulation of floors |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 5136:2003 | Acoustics — Determination of sound power radiated into a duct by fans and other air-moving devices — In-duct method |
| BS EN ISO 13294:1997 | Dental handpieces. Dental air-motors |
| IEC 60645-2:1993 | Audiometers - Part 2: Equipment for speech audiometry |
| BS EN ISO 11546-1:1996 | Acoustics. Determination of sound insulation performances of enclosures Measurements under laboratory conditions (for declaration purposes) |
| ISO 11689:1996 | Acoustics — Procedure for the comparison of noise-emission data for machinery and equipment |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
| 17/30354643 DC : 0 | BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| I.S. EN ISO 11957:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS |
| EN ISO 5840-2:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| I.S. EN ISO 5136:2009 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
| I.S. EN ISO 7235:2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| UNI EN ISO 11691 : 2009 | ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD |
| I.S. EN 12505:2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| EN ISO 11690-1:1996 | Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:1996) |
| EN ISO 5840-1:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| I.S. EN ISO 11546-1:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
| I.S. EN ISO 11546-2:2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
| DIN EN ISO 17201-2:2006-10 | ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 2: ESTIMATION OF MUZZLE BLAST AND PROJECTILE SOUND BY CALCULATION |
| I.S. EN ISO 15744:2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
| I.S. EN ISO 9614-3:2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
| EN ISO 11691:2009 | Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
| I.S. EN ISO 4869-4:2000 | ACOUSTICS - HEARING PROTECTORS - PART 4 - MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR-MUFFS |
| DIN EN 15657-1:2009-10 | ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE |
| I.S. EN ISO 4871:2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| DIN EN ISO 8359:2009-08 | OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| UNI EN ISO 11689 : 1998 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
| UNI EN ISO 15744 : 2008 | HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
| VDE 0682-412 : 2001 AMD 1 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| DIN EN 61243-2 : 2001 AMD 2 2003 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| BS 4196-1:1991 | Sound power levels of noise sources Precision methods for determination of sound power levels for broad-band sources in reverberation rooms |
| BS 4196-2:1991 | Sound power levels of noise sources Precision methods for determination of sound power levels for discrete-frequency and narrow-band sources in reverberation rooms |
| VDE 0557-1 : 2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS |
| VDE 0559-4 : 1988 | POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS) |
| VDI 3743 Blatt 1:2003-09 | Characteristic noise emission values of technical sound sources - Pumps; Centrifugal pumps |
| VDI 2566 Blatt 2:2004-05 | Acoustical design for lift systems without machine room |
| BS 848-6(2003) : 2003 | FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION |
| BS 6840-13:1998 | Sound system equipment Listening tests on loudspeakers |
| BS 6840-4:1997 | Sound system equipment Microphones |
| UNE-EN ISO 5840-2:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| CSA Z107.55 : 1986 | RECOMMENDED PRACTICE FOR THE PREDICTION OF SOUND LEVELS RECEIVED AT A DISTANCE FROM AN INDUSTRIAL PLANT |
| DIN 45641:1990-06 | AVERAGING OF SOUND LEVELS |
| IEC TR 60268-13:1998 | Sound system equipment - Part 13: Listening tests on loudspeakers |
| NF ETS 300807 : 2001 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - AUDIO CHARACTERISTICS OF TERMINALS DESIGNED TO SUPPORT CONFERENCE SERVICES IN THE ISDN |
| BS EN 15657-1:2009 | Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
| 13/30289577 DC : 0 | IEC 62777 - QUALITY EVALUATION METHOD FOR THE SOUND FIELD OF DIRECTIONAL LOUDSPEAKER ARRAY SYSTEM |
| I.S. EN ISO 140-12:2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| 07/30151731 DC : 0 | BS IEC 80601-2-35 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-35: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF BLANKETS, PADS AND MATTRESSES, INTENDED FOR HEATING IN MEDICAL USE |
| BS ISO 9568:1993 | Cinematography. Background acoustic noise levels in the theatres, review rooms and dubbing rooms |
| XP I ETS 300245-6 : 99 XP | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 6: WIDEBAND (7 KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY |
| 09/30182105 DC : 0 | BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| BS EN ISO 9612:2009 | Acoustics. Determination of occupational noise exposure. Engineering method |
| IEC 62006:2010 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
| BS EN 60645-2:1997 | Audiometers Equipment for speech audiometry |
| ISO 10847:1997 | Acoustics — In-situ determination of insertion loss of outdoor noise barriers of all types |
| CSA C22.2 No. 601.2.21 : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFANT RADIANT WARMERS |
| DIN EN 12733:2016-08 (Draft) | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| ANSI S12.53/2 : 1999 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| ANSI S12.44 : 1997 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| CSA Z107.53 : 0 | PROCEDURE FOR PERFORMING A SURVEY OF SOUND DUE TO INDUSTRIAL, INSTITUTIONAL, OR COMMERCIAL ACTIVITIES |
| I.S. EN 61243-2:1999 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| UNE-EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
| BS ISO 6798:1995 | Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method |
| BS 5724-2.30(1993) : 1993 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR CAPNOMETERS FOR USE WITH HUMANS |
| BS EN 61007:1997 | Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures |
| 13/30281662 DC : 0 | BS EN 50332-1 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
| ISO 9918:1993 | Capnometers for use with humans Requirements |
| 07/30137110 DC : 0 | ISO 9612 - ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| BS 7458-2:1991 | Test code for the measurement of airborne noise emitted by rotating electrical machinery Survey method |
| DIN 58648-4:1991-11 | RESPIRATORY EQUIPMENT; COMPRESSED AIR LINE BREATHING APPARATUS IN LIGHT DUTY CONSTRUCTION (LIGHT DUTY COMPRESSED AIR LINE BREATHING APPARATUS); SAFETY REQUIREMENTS, TESTING, MARKING |
| BS EN 61996:2001 | Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Performance requirements. Methods of testing and required test results |
| AAMI ISO 10079-3 : 1999 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE |
| 01/560291 DC : DRAFT JAN 2001 | BS EN ISO 17510-2 SLEEP APNOEA BREATHING THERAPY - PART 2: MASKS AND APPLICATION ACCESSORIES |
| ES 203 038 : 1.2.1 | SPEECH AND MULTIMEDIA TRANSMISSION QUALITY (STQ); REQUIREMENTS AND TESTS METHODS FOR TERMINAL EQUIPMENT INCORPORATING A HANDSET WHEN CONNECTED TO THE ANALOGUE INTERFACE OF THE PSTN |
| BS EN ISO 5840-1:2015 | Cardiovascular implants. Cardiac valve prostheses General requirements |
| BS 7458-1:1991 | Test code for the measurement of airborne noise emitted by rotating electrical machinery Engineering method for free-field conditions over a reflecting plane |
| CSA Z10079.3 : 2003 : R2013 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE |
| CSA M5131 : 1997 | ACOUSTICS - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - MEASUREMENT OF NOISE AT THE OPERATOR'S POSITION - SURVEY METHOD |
| PREN 50332-1 : DRAFT 2013 | SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT" |
| 03/113341 DC : DRAFT SEP 2003 | BS EN ISO 140-11 - ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 11: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT SOUND BY FLOOR COVERINGS ON LIGHTWEIGHT REFERENCE FLOORS |
| BS 5724-2.119(1991) : 1991 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR BABY INCUBATORS |
| NF EN 61029-1 : 2009 AMD 11 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| BS EN 61237-4:1998 | Broadcast video tape recorders. Methods of measurement Analogue audio performance measurements |
| ISO 13475-1:1999 | Acoustics — Stationary audible warning devices used outdoors — Part 1: Field measurements for determination of sound emission quantities |
| AAMI DF80:2003 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-4: PARTICULAR REQUIREMENTS FOR THE SAFETY OF CARDIAC DEFIBRILLATORS [INCLUDING AUTOMATED EXTERNAL DEFIBRILLATORS] |
| AAMI ID26 : 2004 : R2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| BS ISO 4869-2 : 1994 AMD 8935 | ACOUSTICS - HEARING PROTECTORS - ESTIMATION OF EFFECTIVE A-WEIGHTED SOUND PRESSURE LEVELS WHEN HEARING PROTECTORS ARE WORN |
| BS EN 61243-5:2001 | Live working. Voltage detectors Voltage detecting systems (VDS) |
| BS 4196-3:1981 | Sound power levels of noise sources Engineering methods for determination of sound power levels for sources in special reverberation test rooms |
| UNE-EN ISO 5840-1:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| DIN EN ISO 5840-2:2016-05 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
| DIN EN ISO 5840-1:2015-12 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
| BS 6812-2:1987 | Airborne noise emitted by earth-moving machinery Method of measurement at the operator\'s position in a stationary test condition |
| I.S. EN ISO 5840-2:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
| NF EN 14035-12 : 2003 | FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| I.S. EN ISO 10637:2000 | DENTAL EQUIPMENT - HIGH- AND MEDIUM-VOLUME SUCTION SYSTEMS |
| NF ISO 14695 : 2003 | INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION |
| AAMI ISO 5840-1 : 2016 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 27574-1:1991 | ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS |
| ISO 3742:1988 | Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms |
| I.S. EN 60315-7:1998 | METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 7: METHODS OF MEASUREMENT ON DIGITAL SATELLITE RADIO (DSR) RECEIVERS |
| I.S. EN 27785-1:1994 | DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES |
| BS 6812-1:1987 | Airborne noise emitted by earth-moving machinery Method of measurement of exterior noise in a stationary test condition |
| UNI EN 12733 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| ANSI S12.15 : 1992 : R2007 | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
| UNI ISO 9533 : 2008 | EARTH-MOVING MACHINERY - MACHINE-MOUNTED FORWARD AND REVERSE AUDIBLE WARNING ALARM - SOUND TEST METHOD |
| BS 7445-1:1991 | Description and measurement of environmental noise Guide to quantities and procedures |
| SAE J 2103 : JUN 2003 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY EARTHMOVING MACHINERY - OPERATOR'S POSITION - STATIONARY TESTING CONDITION |
| IEC 60244-1:1999 | Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters |
| CSA C22.2 No. 601.2.19 : 1992 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF BABY INCUBATORS |
| ANSI S12.34 : 0 | ENGINEERING METHODS FOR THE DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES FOR ESSENTIALLY FREE-FIELD CONDITIONS OVER A REFLECTING PLANE |
| ASTM F 1690 : 1996 : R2004 | Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013) |
| CSA ISO 1996-3 : 2005 | ACOUSTICS - DESCRIPTION AND MEASUREMENT OF ENVIRONMENTAL NOISE - PART 3: APPLICATION TO NOISE LIMITS |
| EN 62006:2011 | Hydraulic machines - Acceptance tests of small hydroelectric installations |
| UNI EN ISO 10052 : 2010 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| I.S. HD 483.5 S2:1995 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| I.S. EN 61204:1996 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS |
| DIN EN 12505:2010-11 | Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009) |
| ISO 140-4:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms |
| BS EN 1835:2000 | Respiratory protective devices. Light duty construction compressed air line breathing apparatus incorporating a helmet or a hood. Requirements, testing, marking |
| BS EN ISO 15606:2000 | Dental handpieces. Air-powered scalers and scaler tips |
| BS EN ISO 11819-1:2001 | Acoustics. Measurement of the influence of road surfaces on traffic noise Statistical pass-by method |
| IEC 61329:1995 | Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production) |
| ISO 9612:2009 | Acoustics Determination of occupational noise exposure Engineering method |
| UNE-EN ISO 11203:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| ISO 7574-1:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions |
| ISO 7785-2:1995 | Dental handpieces Part 2: Straight and geared angle handpieces |
| ISO 5840:2005 | Cardiovascular implants Cardiac valve prostheses |
| BS EN ISO 14257:2001 | Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
| UNE-EN ISO 5136:2010 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
| ISO 17201-2:2006 | Acoustics Noise from shooting ranges Part 2: Estimation of muzzle blast and projectile sound by calculation |
| ISO 8297:1994 | Acoustics — Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment — Engineering method |
| IEC 61183:1994 | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
| BS EN 12505 : 2000 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| ISO/TR 4869-4:1998 | Acoustics Hearing protectors Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs |
| ASA/ANSI S12.44:1997(R2020) | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| EN ISO 11203:2009 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| UNI EN ISO 11203 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
| I.S. EN ISO 11203:2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
| OPEI B175.4 : 2013 | OUTDOOR POWER EQUIPMENT - PORTABLE, HANDHELD, INTERNAL COMBUSTION ENGINE-POWERED CUT-OFF MACHINES - SAFETY AND ENVIRONMENTAL REQUIREMENTS |
| EN 269:1994 | Respiratory protective devices - Powered fresh air hose breathing apparatus incorporating a hood - Requirements, testing, marking |
| UNI EN ISO 3743-2 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| UNI EN ISO 5840 : 2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| UNI EN 791 : 2009 | DRILL RIGS - SAFETY |
| UNI EN ISO 9614-3 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING |
| UNI EN ISO 11957 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCE OF CABINS - LABORATORY AND IN SITU MEASUREMENTS |
| UNI EN ISO 4871 : 2009 | ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| UNI EN ISO 7235 : 2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| UNI EN ISO 5136 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
| UNI EN ISO 8359 : 2012 | OXYGEN CONCENTRATORS FOR MEDICAL USE - SAFETY REQUIREMENTS |
| UNI EN ISO 11546-1 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES) |
| UNI EN ISO 11546-2 : 2009 | ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES) |
| UNI EN 12505 : 2010 | FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS |
| CEI EN 61243-5 : 2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 5: VOLTAGE DETECTING SYSTEMS (VDS) |
| UNI ISO 9613-2 : 2006 | ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
| BS EN 50144-2-16:2003 | Safety of hand-held electric motor operated tools Particular requirements for tackers |
| BS 5724-2.120(1991) : 1991 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR TRANSPORT INCUBATORS |
| 99/561983 DC : APR 99 | ISO/DIS 14257 - ACOUSTICS - MEASUREMENT AND MODELLING OF SPATIAL SOUND DISTRIBUTION CURVES IN WORKROOMS FOR EVALUATION OF THEIR ACOUSTICAL PERFORMANCE |
| 98/715898 DC : DRAFT OCT 1998 | ISO/CD 8579-1 - ACCEPTANCE CODE FOR GEAR UNITS - PART 1: TEST CODE FOR AIRBORNE SOUND |
| TR 101 380 : 1.1.1 | DIGITAL TERMINALS AND ACCESS (DTA) - DEFINITIONS, ABBREVIATIONS AND SYMBOLS |
| BS 7077-1.1(1993) : AMD 8364 | DENTAL HANDPIECES AND ACCESSORIES - HANDPIECES - SPECIFICATION FOR HIGH SPEED AIR TURBINE HANDPIECES |
| 99/710387 DC : DRAFT JUN 99 | EN ISO 15744 - HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
| BS 6288-5(1989) : 1989 AMD 8126 | MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - SPECIFICATION FOR ELECTRICAL MAGNETIC TAPE PROPERTIES |
| BS EN 60804:2001 | Integrating-averaging sound level meters |
| I.S. EN ISO 7785-2:1998 | DENTAL HANDPIECES - PART 2: STRAIGHT AND GEARED ANGLE HANDPIECES |
| DIN 45640-1 : 1990 | NOISE EMITTED BY VESSELS ON INLAND WATER-WAYS AND HARBOURS; METHOD FOR THE DETERMINATION OF THE MAXIMUM SOUND PRESSURE LEVEL |
| BS ISO 8297:1994 | Acoustics. Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment. Engineering method |
| ISO 9902:1993 | Textile machinery acoustics Determination of sound pressure levels and sound power levels emitted by textile machines Engineering and survey methods |
| 03/113375 DC : DRAFT AUG 2003 | BS EN ISO 22374 - DENTISTRY - DENTAL HANDPIECES - ELECTRICAL-POWERED SCALERS AND SCALER TIPS |
| BS 7422(1991) : 1991 AMD 10092 | SPECIFICATION FOR FILTERS FOR THE MEASUREMENT OF AUDIBLE SOUND IN THE PRESENCE OF ULTRASOUND |
| ISO 9921-1:1996 | Ergonomic assessment of speech communication Part 1: Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method) |
| 05/30134824 DC : 0 | EN 50447 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR HEART-LUNG MACHINES (HLM) |
| ISO/TR 7849:1987 | Acoustics Estimation of airborne noise emitted by machinery using vibration measurement |
| BS ISO 11498 : 1997 AMD 10705 | DENTAL HANDPIECES - DENTAL LOW-VOLTAGE ELECTRIC MOTORS |
| 03/303500 DC : DRAFT FEB 2003 | ISO 6969 - ROAD VEHICLES - SOUND SIGNALLING DEVICES - TESTS AFTER MOUNTING ON VEHICLE |
| BS ISO 3743-2 : 1994 AMD 9426 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| DIN ISO 5128:1984-11 | ACOUSTICS - MEASUREMENT OF NOISE INSIDE MOTOR VEHICLES |
| BS 5724-2.121(1995) : 1995 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR SAFETY - SPECIFICATION FOR INFANT RADIANT WARMERS |
| 07/30164508 DC : 0 | IEC 60601-2-21 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-21: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF INFANT RADIANT WARMERS |
| XP I ETS 300245-8 : 99 XP | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - PART 8: SPEECH TRANSMISSION CHARACTERISTIC WHEN USING LOW-DELAY CODE-EXCITED LINEAR PREDICTION (LD-CELP) CODING AT 16 KBIT/S |
| BS ISO 9921-1:1996 | Ergonomic assessment of speech communication Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method) |
| BS EN 61248-1:1997 | Transformers and inductors for use in electronic and telecommunication equipment Generic specification |
| I.S. EN 27917:1992 | ACOUSTICS - MEASUREMENT AT THE OPERATOR'S POSITION OF AIRBORNE NOISE EMITTED BY BRUSH SAWS |
| CSA Z10079.3 : 2003 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR PRESSURE SOURCE |
| CEI EN 61012 : 1999 | FILTERS FOR THE MEASUREMENT OF AUDIBLE SOUND IN THE PRESENCE OF ULTRASOUND |
| CEI EN 61329 : 1998 | SOUND SYSTEM EQUIPMENT METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SOUNDERS (ELECTROACOUSTIC TRANSDUCERS FOR TONE PRODUCTION) |
| BS EN 12733 : 2001 | AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY |
| BS EN 62121:2001 | Methods of measurement for minidisc recorders/players |
| TBR 008 : 20002 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TELEPHONY 3,1 kHz TELESERVICE - ATTACHMENT REQUIREMENTS FOR HANDSET TERMINALS |
| BS ISO 13472-1:2002 | Acoustics. Measurement of sound absorption properties of road surfaces in situ Extended surface method |
| 07/30168572 DC : 0 | BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| BS EN 61029-1 : 2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| 01/564696 DC : DRAFT NOV 2001 | BS ISO 7731 - ERGONOMICS - DANGER SIGNALS FOR PUBLIC AND WORK AREAS - AUDITORY DANGER SIGNALS |
| ISO 8194:1987 | Radiation protection — Clothing for protection against radioactive contamination — Design, selection, testing and use |
| 02/565107 DC : DRAFT DEC 2002 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| BS 7721(1994) : 1994 AMD 14748 | GAS TURBINES AND GAS TURBINE SETS - MEASUREMENT OF EMITTED AIRBORNE NOISE - ENGINEERING/SURVEY METHOD |
| I-ETS 300 245-6 : JAN 96 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - TECHNICAL CHARACTERISTICS OF TELEPHONY TERMINALS - WIDEBAND (7KHZ), LOUDSPEAKING AND HANDS FREE TELEPHONY |
| UNI ISO 230-5 : 2010 | TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION |
| BS EN 61260:1996 | Electroacoustics. Octave-band and fractional-octave-band filters |
| BS EN 61243-2:1998 | Live working. Voltage detectors Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| BS ISO 14695:2003 | Industrial fans. Method of measurement of fan vibration |
| ANSI S12.10 : 2002 | ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED BY INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS EQUIPMENT |
| ISO 140-8:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| CSA Z10079.1 : 2003 | MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT - SAFETY REQUIREMENTS |
| ANSI S1.42 : 2001 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| CSA Z9918 : 0 | CAPNOMETERS FOR USE WITH HUMANS - REQUIREMENTS |
| CEI EN 62006 : 2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
| ICAO 7300 ANNEX 16 VOL.1 : 2011 | ANNEX 16 TO THE CONVENTION ON INTERNATIONAL CIVIL AVIATION (ICAO 7300) - ENVIRONMENTAL PROTECTION - VOLUME 1: AIRCRAFT NOISE |
| ISO 1680-2:1986 | Acoustics Test code for the measurement of airborne noise emitted by rotating electrical machinery Part 2: Survey method |
| ISO 7196:1995 | Acoustics — Frequency-weighting characteristic for infrasound measurements |
| NF ETS 300 082 : 1995 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - 3,1 KHZ TELEPHONY TELESERVICE - END-TO-END COMPATIBILITY REQUIREMENTS FOR TELEPHONY TERMINALS |
| SAE J ISO 6393 : FEB 2003 | ACOUSTICS - MEASUREMENT OF EXTERIOR NOISE EMITTED BY EARTH-MOVING MACHINERY - STATIONARY TEST CONDITIONS |
| ISO 6242-3:1992 | Building construction Expression of users' requirements Part 3: Acoustical requirements |
| I.S. EN ISO 4869-2:1996 | ACOUSTICS - HEARING PROTECTORS - PART 2: ESTIMATION OF EFFECTIVE A-WEIGHTED SOUND PRESSURE LEVELS WHEN HEARING PROTECTORS ARE WORN |
| BS EN ISO 4869-2:1995 | Acoustics. Hearing protectors Estimation of effective A-weighted sound pressure levels when hearing protectors are worn |
| ISO 362:1998 | Acoustics Measurement of noise emitted by accelerating road vehicles Engineering method |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| NF EN ISO 10637 : 2001 | DENTAL EQUIPMENT - HIGH- AND MEDIUM-VOLUME SUCTION SYSTEMS |
| ANSI/ASA S12.44 : 1997(R2017) | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| I.S. EN 146:1992 | RESPIRATORY PROTECTIVE DEVICES - POWERED PARTICLE FILTERING DEVICES INCORPORATING HELMETS OR HOODS - REQUIREMENTS, TESTING AND MARKING |
| ANSI/ASA S12.19 :1996(R2016) | MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE |
| ANSI S12.43 : 1997 : R2012 | METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS |
| ANSI S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| BS EN 60704-2-3:2002 | Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Particular requirements for dishwashers |
| ASTM F 1690 : 1996 | Standard Specification for Humidifiers for Medical Use-Part 1 General Requirements for Active Humidification Systems |
| ISO 1680-1:1986 | Acoustics Test code for the measurement of airborne noise emitted by rotating electrical machinery Part 1: Engineering method for free-field conditions over a reflecting plane |
| I.S. EN 61237-4:1998 | BROADCAST VIDEO TAPE RECORDERS - METHODS OF MEASUREMENT - PART 4: ANALOGUE PERFORMANCE MEASUREMENTS |
| I.S. EN 62006:2011 | HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| IEC 61007:1994 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| DIN EN ISO 15744:2008-11 | HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2) |
| DIN EN ISO 14257:2011-11 | Acoustics - Measurement and parametric description of of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001) |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| BS EN ISO 140-4:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation between rooms |
| IEC 61481:2001+AMD1:2002+AMD2:2004 CSV | Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c. |
| BS EN ISO 15744:2002 | Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2) |
| BS EN ISO 11689 : 1997 | ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT |
| BS EN 12094-12:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for pneumatic alarm devices |
| ISO 9613-2:1996 | Acoustics — Attenuation of sound during propagation outdoors — Part 2: General method of calculation |
| BS EN ISO 5136:2009 | Acoustics. Determination of sound power radiated into a duct by fans and other air-moving devices. In-duct method |
| ISO 3382:1997 | Acoustics — Measurement of the reverberation time of rooms with reference to other acoustical parameters |
| BS EN ISO 11821:1997 | Acoustics. Measurement of the in situ sound attenuation of a removable screen |
| ISO 11546-1:1995 | Acoustics Determination of sound insulation performances of enclosures Part 1: Measurements under laboratory conditions (for declaration purposes) |
| ISO 10052:2004 | Acoustics Field measurements of airborne and impact sound insulation and of service equipment sound Survey method |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| IEC 60804:2000 | Integrating-averaging sound level meters |
| ISO 11691:1995 | Acoustics Measurement of insertion loss of ducted silencers without flow Laboratory survey method |
| IEC 61243-5:1997 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| BS EN ISO 7785-2:1998 | Dental handpieces Straight and geared angle handpieces |
| BS EN ISO 4869-4:2000 | Acoustics. Hearing protectors Measurement of effective sound pressure levels for level-dependent sound-restoration ear muffs |
| BS EN ISO 11690-1:1997 | Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies |
| BS EN ISO 11546-2:2009 | Acoustics. Determination of sound insulation performances of enclosures Measurements in situ (for acceptance and verification purposes) |
| BS EN 864:1997 | Medical electrical equipment. Capnometers for use with humans. Particular requirements |
| BS EN ISO 7785-1:1999 | Dental handpieces High-speed air turbine handpieces |
| BS EN ISO 11203:2009 | Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 11498:1997 | Dental handpieces Dental low-voltage electrical motors |
| UNE-EN ISO 3743-2:2010 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| ISO 12001:1996 | Acoustics — Noise emitted by machinery and equipment — Rules for the drafting and presentation of a noise test code |
| ISO 7785-1:1997 | Dental handpieces Part 1: High-speed air turbine handpieces |
| UNE-EN ISO 7235:2010 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| UNE-EN 12505:2001 | FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| IEC 60268-5:2003+AMD1:2007 CSV | Sound system equipment - Part 5: Loudspeakers |
| ISO 140-5:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 5: Field measurements of airborne sound insulation of faade elements and faades |
| ISO 11957:1996 | Acoustics — Determination of sound insulation performance of cabins — Laboratory and in situ measurements |
| ISO 11819-1:1997 | Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 1: Statistical Pass-By method |
| IEC 61237-4:1997 | Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements |
| UNE-EN ISO 9614-3:2010 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| IEC 61248-1:1996 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
| ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 6: Guidance on the work environment |
| UNE-EN ISO 12001:2010 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| ISO 15744:2002 | Hand-held non-electric power tools Noise measurement code Engineering method (grade 2) |
| UNE-EN ISO 11546-2:2010 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| ISO 11064-6:2005 | Ergonomic design of control centres — Part 6: Environmental requirements for control centres |
| ISO 15606:1999 | Dental handpieces Air-powered scalers and scaler tips |
| IEC 61252:1993+AMD1:2000+AMD2:2017 CSV | Electroacoustics - Specifications for personal sound exposure meters |
| ISO 14257:2001 | Acoustics — Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance |
| ISO 140-6:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors |
| ISO 5840-2:2015 | Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes |
| IEC 62121:2001 | Methods of measurement for minidisc recorders/players |
| BS EN ISO 5840:2009 | Cardiovascular implants. Cardiac valve prostheses |
| UNE-EN ISO 3746:2010 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995) |
| IEC 61606:1997 | Audio and audiovisual equipment - Digital audio parts - Basic methods of measurement of audio characteristics |
| ISO 11821:1997 | Acoustics — Measurement of the in situ sound attenuation of a removable screen |
| ISO 11546-2:1995 | Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes) |
| BS EN ISO 11820:1997 | Acoustics. Measurements on silencers in situ |
| ISO 8359:1996 | Oxygen concentrators for medical use Safety requirements |
| BS EN ISO 4871:2009 | Acoustics. Declaration and verification of noise emission values of machinery and equipment |
| IEC 61996:2000 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results |
| BS EN ISO 12001:2009 | Acoustics. Noise emitted by machinery and equipment. Rules for the drafting and presentation of a noise test code |
| BS EN ISO 140-3:1995 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurement of airborne sound insulation of building elements |
| BS EN 791 : 1996 | DRILL RIGS - SAFETY |
| BS EN ISO 140-7:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of impact sound insulation of floors |
| ONORM EN ISO 3743-2 : 2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| BS EN ISO 140-5:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Field measurements of airborne sound insulation of facade elements and facades |
| UNE-EN ISO 4871:2010 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| IEC 61063:1991 | Acoustics - Measurement of airborne noise emitted by steam turbines and driven machinery |
| EN 61481:2001/A2:2005 | LIVE WORKING - PORTABLE PHASE COMPARATORS FOR USE ON VOLTAGES FROM 1 KV TO 36 KV A.C. |
| EN 61252:1995/A2:2017 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS (IEC 61252:1993/A2:2017) |
| EN ISO 11957:2009 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| EN 15657-1:2009 | Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example |
| EN ISO 140-4:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998) |
| EN ISO 4869-4:2000 | Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998) |
| EN ISO 11064-6:2005 | Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005) |
| EN ISO 15744:2008 | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
| EN ISO 11819-1:2001 | Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 1: Statistical Pass-By method (ISO 11819-1:1997) |
| EN ISO 11821:1997 | Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997) |
| EN ISO 15606:1999 | Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999) |
| EN ISO 9612:2009 | Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) |
| EN ISO 3743-2:2009 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| EN ISO 17201-2:2006 | Acoustics - Noise from shooting ranges - Part 2: Estimation of muzzle blast and projectile sound by calculation (ISO 17201-2:2006) |
| EN 864 : 1996 | MEDICAL ELECTRICAL EQUIPMENT - CAPNOMETERS FOR USE WITH HUMANS - PARTICULAR REQUIREMENTS |
| EN ISO 12001:2009 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN ISO 7785-1:1999 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) |
| EN ISO 9241-6:1999 | Ergonomic requirements for office work with visual display terminals (VDTs) - Part 6: Guidance on the work environment (ISO 9241-6:1999) |
| EN 27574-1:1988 | Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions (ISO 7574-1:1985) |
| EN ISO 140-7:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998) |
| EN ISO 140-5:1998 | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of façade elements and façades (ISO 140-5:1998) |
| EN ISO 140-12 : 2000 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 12: LABORATORY MEASUREMENT OF ROOM-TO-ROOM AIRBORNE AND IMPACT SOUND INSULATION OF AN ACCESS FLOOR |
| EN 27785-1 : 1994 | DENTAL HANDPIECES - PART 1: HIGH SPEED AIR TURBINE HANDPIECES |
| EN 1835 : 1999 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING |
| EN ISO 140-6 : 1998 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS |
| EN 270 : 94 AMD 1 2000 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A HOOD - REQUIREMENTS, TESTING, MARKING |
| EN ISO 9614-3:2009 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| EN ISO 3382 : 2000 | ACOUSTICS - MEASUREMENT OF THE REVERBERATION TIME OF ROOMS WITH REFERENCE TO OTHER ACOUSTICAL PARAMETERS |
| EN ISO 140-8 : 1997 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 8: LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE BY FLOOR COVERINGS ON A HEAVYWEIGHT STANDARD FLOOR |
| EN ISO 11546-1:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| EN ISO 13294:1997 | Dental handpieces - Dental air-motors (ISO 13294:1997) |
| EN ISO 7785-2:1997 | Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995) |
| EN 2719917 : 1991 | ACOUSTICS - MEASUREMENT AT THE OPERATOR'S POSITION OF AIRBORNE NOISE EMITTED BY BRUSH SAWS |
| EN ISO 5136:2009 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
| EN ISO 11546-2:2009 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| EN ISO 14257:2001 | Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001) |
| EN 791:1995+A1:2009 | Drill rigs - Safety |
| EN ISO 11498:1999 | Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 25136 : 1993 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS - IN-DUCT METHOD |
| EN 1454 : 1997 | PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY |
| EN ISO 11820:1996 | Acoustics - Measurements on silencers in situ (ISO 11820:1996) |
| ISO 13472-1:2002 | Acoustics Measurement of sound absorption properties of road surfaces in situ Part 1: Extended surface method |
| DIN EN 23742:1991-11 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR DISCRETE-FREQUENCY AND NARROW-BAND SOURCES IN REVERBERATION ROOMS |
| BS 5724-2.124(1998) : 1998 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| BS EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results |
| DIN ISO 362:2003-08 | ACOUSTICS - MEASUREMENT OF NOISE EMITTED BY ACCELERATING ROAD VEHICLES - ENGINEERING METHOD |
| 01/707359 DC : DRAFT APR 2001 | ISO/DIS 13325 - TYRES - COAST-BY-METHOD FOR MEASUREMENT OF TYRE/ROAD SOUND EMISSION |
| I.S. EN 12419:1999 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING MARKING |
| CSA Z107.54 : 1985 | PROCEDURE FOR MEASUREMENT OF SOUND AND VIBRATION DUE TO BLASTING OPERATIONS |
| DIN EN 23741:1991-11 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - PRECISION METHODS FOR BROAD-BAND SOURCES IN REVERBERATION ROOMS |
| BS ISO 8579-1:2002 | Acceptance code for gear units Test code for airborne sound |
| I.S. EN ISO 13294:1998 | DENTAL HANDPIECES - DENTAL AIR-MOTORS |
| DIN VDE 0559-4 : 1988 | POWER CONVERTERS FOR ROLLING STOCK - DIRECT D.C. CONVERTERS (D.C. CHOPPER CONVERTERS) |
| BS ISO 9611:1996 | Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted |
| UNI ISO 9613-1 : 2006 | Acoustics - Sound attenuation in outdoor propagation - Part 1: Calculation of atmospheric absorption |
| 03/311729 DC : DRAFT JULY 2003 | EN ISO 8041 - HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| BS ISO 18738:2003 | Lifts (elevators). Measurement of lift ride quality |
| BS 7739-1:1994 | Specification for capacitive type to be used for voltage exceeding 1 kV a.c.Voltage detectors |
| 03/101986 DC : DRAFT JAN 2003 | BS EN ISO 17201-1 - ACOUSTICS - NOISE FROM SHOOTING RANGES - PART 1: SOUND SOURCE ENERGY DETERMINATION OF MUZZLE BLAST |
| BS EN 62006:2011 | Hydraulic machines. Acceptance tests of small hydroelectric installations |
| DIN EN ISO 11203:2010-01 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
| 09/30166871 DC : 0 | BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS |
| ISO 6798:1995 | Reciprocating internal combustion engines Measurement of emitted airborne noise Engineering method and survey method |
| BIS IS 12193-3 : 2012(R2015) | METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 3: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS |
| DIN 45640-2:1993-11 | NOISE EMITTED BY VESSELS ON INLAND WATER-WAYS AND HARBOURS; ENVELOPING SURFACE METHOD FOR THE DETERMINATION OF THE SOUND POWER LEVEL |
| ANSI S12.62 : 2012 | ACOUSTICS - ATTENUATION OF SOUND DURING PROPAGATION OUTDOORS - PART 2: GENERAL METHOD OF CALCULATION |
| DIN EN ISO 9612:2009-09 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| 14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
| UNI EN ISO 9612 : 2011 | ACOUSTICS - DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE - ENGINEERING METHOD |
| BS EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools Particular requirements for chain saws |
| 11/30206274 DC : 0 | BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER |
| BS 4196-8:1991 | Sound power levels of noise sources Specification for the performance and calibration of reference sound sources |
| BS 4196-7:1988 | Sound power levels of noise sources Survey method for determination of sound power levels of noise sources using a reference sound source |
| BS EN 61043:1994 | Specification for electroacoustics. Instruments for the measurement of sound intensity. Measurement with pairs of pressure sensing microphones |
| BS 848-2.5(2003) : 2003 | ACOUSTICS - DETERMINATION OF SOUND POWER RADIATED INTO A DUCT BY FANS AND OTHER AIR-MOVING DEVICES - IN-DUCT METHOD |
| 00/713944 DC : DRAFT SEP 2000 | ISO/DIS 14695 - INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION |
| CEI EN 60315-4 : 1999 | METHODS OF MEASUREMENT ON RADIO RECEIVERS FOR VARIOUS CLASSES OF EMISSION - PART 4: RECEIVERS FOR FREQUENCY-MODULATED SOUND BROADCASTING EMISSIONS |
| AAMI ID26 : 2004 : R2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY OF INFUSION PUMPS AND CONTROLLERS |
| BS 6864-1:1987 | Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations Method for measurement |
| 95/710815 DC : DRAFT AUG 1995 | PREN 12076 - MEASUREMENT OF NOISE EMISSION FROM COMPRESSORS AND VACUUM PUMPS (ENGINEERING METHOD) |
| 03/311404 DC : 0 | IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CEI EN 60645-2 : 1997 | AUDIOMETERS - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY |
| NF ISO 7183 : 1989 | COMPRESSED AIR DRYERS - SPECIFICATIONS AND TESTS |
| IEEE C37.082-1982 | IEEE Standard Methods for the Measurement of Sound Pressure Levels of AC Power Circuit Breakers |
| I.S. EN 60094-5:1994 | MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 5: ELECTRICAL MAGNETIC TAPE PROPERTIES |
| I.S. EN 61329:1999 | SOUND SYSTEM EQUIPMENT - METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SOUNDERS (ELECTROACOUSTIC TRANSDUCERS FOR TONE PRODUCTION) |
| NF ISO 230-5 : 2003 | TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION |
| ANSI S12.53/2 : 1999 : R2009 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL, MOVABLE SOURCES IN REVERBERANT FIELDS - PART 2: METHODS FOR SPECIAL REVERBERATION TEST ROOMS |
| ANSI S1.42 : 2001 : R2011 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ANSI S12.18 : 1994 : R2009 | PROCEDURES FOR OUTDOOR MEASUREMENT OF SOUND PRESSURE LEVEL |
| ANSI/ASA S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ES 201 168 : 1.2.1 | CORPORATE TELECOMMUNICATION NETWORKS (CN); TRANSMISSION CHARACTERISTICS OF DIGITAL PRIVATE BRANCH EXCHANGES (PBXS) |
| I.S. EN 60645-2:1999 | AUDIOMETERS - PART 2: EQUIPMENT FOR SPEECH AUDIOMETRY |
| ANSI S12.44 : 1997 : R2007 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI S3.44 : 2016 | DETERMINATION OF OCCUPATIONAL NOISE EXPOSURE AND ESTIMATION OF NOISE-INDUCED HEARING IMPAIRMENT |
| EN 12733:2001+A1:2009 | Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
| I.S. EN 61096:1993 | METHODS OF MEASURING THE CHARACTERISTICS OF REPRODUCING EQUIPMENT FOR DIGITAL AUDIO COMPACT DISCS |
| IEC 60315-4:1997 | Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions |
| ISO 4412-1:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps |
| IEC 61204:1993+AMD1:2001 CSV | Low-voltage power supply devices, d.c. output - Performance characteristics |
| DIN EN ISO 3743-2:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
| DIN EN ISO 9614-3:2009-11 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
| BS EN ISO 11064-6:2005 | Ergonomic design of control centres Environmental requirements for control centres |
| ISO 11690-1:1996 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 1: Noise control strategies |
| IEC 61243-2:1995+AMD1:1999+AMD2:2002 CSV | Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| ISO 140-7:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 7: Field measurements of impact sound insulation of floors |
| UNE-EN ISO 11957:2010 | Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
| BS EN ISO 10052 : 2004 | ACOUSTICS - FIELD MEASUREMENTS OF AIRBORNE AND IMPACT SOUND INSULATION AND OF SERVICE EQUIPMENT SOUND - SURVEY METHOD |
| ISO 13294:1997 | Dental handpieces Dental air-motors |
| BS EN ISO 140-8:1998 | Acoustics. Measurement of sound insulation in buildings and of building elements Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor |
| BS EN 1454:1997 | Portable, hand-held, internal combustion cutting-off machines. Safety |
| BS EN ISO 9614-3:2009 | Acoustics. Determination of sound power levels of noise sources using sound intensity Precision method for measurement by scanning |
| ISO 5128:1980 | Acoustics — Measurement of noise inside motor vehicles |
| ISO 5840-1:2015 | Cardiovascular implants Cardiac valve prostheses Part 1: General requirements |
| BS EN 270:1995 | Respiratory protective devices. Compressed air line breathing apparatus incorporating a hood. Requirements, testing, marking |
| BS EN 25136:1994 | Acoustics. Determination of sound power radiated into a duct by fans. In-duct method |
| IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
| DIN EN ISO 5840:2009-08 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
| EN 61243-5:2001 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| EN 61996:2000 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Performance requirements - Methods of testing and required test results |
| EN 61606 : 1997 | AUDIO AND AUDIOVISUAL EQUIPMENT - DIGITAL AUDIO PARTS - BASIC METHODS OF MEASUREMENT OF AUDIO CHARACTERISTICS |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| EN 61237-4:1997 | Broadcast video tape recorders - Methods of measurement - Part 4: Analogue audio performance measurements |
| DIN EN ISO 140-3:2005-03 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
| DIN EN ISO 12001:2010-01 | Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) |
| EN 61243-2:1997/A2:2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES OF 1 KV TO 36 KV A.C. |
| EN 61248-1 : 1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
| EN 60268-5:2003/A1:2009 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| EN 60315-7:1995 | Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers |
| EN 60094-5:1993/A1:1996 | MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 5: ELECTRICAL MAGNETIC TAPE PROPERTIES |
| DIN EN 457:1992-04 | SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING |
| DIN EN ISO 11064-6:2005-10 | Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005) |
| EN ISO 5840:2009 | Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) |
| EN 60804:2000 | Integrating-averaging sound level meters |
| EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| EN 60551:1992/A1:1997 | DETERMINATION OF TRANSFORMER AND REACTOR SOUND LEVELS |
| DIN EN ISO 5136:2009-11 | Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
| DIN EN ISO 11546-2:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
| DIN EN ISO 14509:2001-03 | SMALL CRAFT - MEASUREMENT OF AIRBORNE SOUND EMITTED BY POWERED RECREATIONAL CRAFT |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 11546-1:2010-01 | Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
| EN 60704-2-3:2002/A1:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS |
| EN 60244-1:2000 | Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters |
| EN 61204:1995/A1:2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001) |
| EN 50332-1:2013 | Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment" |
| NF EN ISO 11203 : 2009 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL |
| EN 60094-3:1996/A3:1996 | MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 3: METHODS OF MEASURING THE CHARACTERISTICS OF RECORDING AND REPRODUCING EQUIPMENT FOR SOUND ON MAGNETIC TAPE |
| SAE J1470:1998(S2023) | Measurement of Noise Emitted by Accelerating Highway Vehicles(STABILIZED Aug 2023) |
| BS 6402(1994) : 1994 AMD 9323 | ELECTROACOUSTICS - SPECIFICATIONS FOR PERSONAL SOUND EXPOSURE METERS |
| OPEI B175.3 : 2013 | OUTDOOR POWER EQUIPMENT - INTERNAL COMBUSTION ENGINE-POWERED HAND-HELD GRASS TRIMMERS AND BRUSHCUTTERS - SAFETY AND ENVIRONMENTAL REQUIREMENTS |
| ASME PTC36 : 2004 : R2013 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| BS 6840-5(1995) : 1995 AMD 9409 | SOUND SYSTEM EQUIPMENT - METHODS FOR SPECIFYING AND MEASURING THE CHARACTERISTICS OF LOUDSPEAKERS |
| BS 4196-3:1991 | Sound power levels of noise sources Engineering methods for determination of sound power levels for sources in special reverberation test rooms |
| ASME PTC36 : 2004 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| BS 2750-3(1995) : 1995 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.