IEC 60512-1:2001
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Connectors for electronic equipment - Tests and measurements - Part 1: General
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
12-09-2022
Superseded by
Language(s)
English - French, Spanish, Castilian
Published date
30-01-2001
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 General
1.1 Scope and object
1.2 Normative references
1.3 Definitions
1.3.1 family
1.3.2 sub-family
1.3.3 type and style
1.3.4 basic specification
1.3.5 generic specification
1.3.6 sectional specification
1.3.7 blank detail specification
1.3.8 detail specification
1.3.9 inspection (test) lot
1.3.10 test specimen
1.3.11 test
1.3.12 pre-conditioning
1.3.13 conditioning
1.3.14 recovery
2 Standard conditions for testing
3 Testing
3.1 Test sequences
3.2 Combined tests
3.3 Repetition of measurements
3.4 Alternative test methods
4 Classification of non-conforming components
4.1 Major non-conformance
4.2 Minor non-conformance
Gives general information on the application of test methods on the IEC 60512 series. Is to be used in conjunction with any parts of the IEC 60512 series.
| Committee |
TC 48/SC 48B
|
| DevelopmentNote |
Also numbered as BS EN 60512-1. (06/2001) Stability Date: 2017. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS C 5402-1:2002 | Identical |
| NF EN 60512-1 : 2001 | Identical |
| NBN EN 2591 : 1993 | Identical |
| NEN EN IEC 60512-1 : 2001 | Identical |
| I.S. EN 60512-1:2001 | Identical |
| PN EN 60512-1 : 2004 | Identical |
| SN EN 60512-1 : 1994 | Identical |
| UNE 20606-1:1986 | Identical |
| CEI EN 60512-1 : 2001 | Identical |
| CEI 48-3 : 1ED 1982 | Identical |
| CEI 48-10 : 1ED 1990 | Identical |
| EN 60512-1:2001 | Identical |
| DIN EN 60512-1:2001-11 | Identical |
| UNE-EN 60512-1:2003 | Identical |
| NEN 10512-1 : 1995 | Identical |
| DIN IEC 60512-1:1994-05 | Identical |
| BS EN 61076-3-115:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related to IEC 61076-3-106. Push-pull type |
| BS EN 61076-3-122:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments |
| BS EN IEC 60512-15-2:2018 | Connectors for electrical and electronic equipment. Tests and measurements Connector tests (mechanical). Test 15b: Insert retention in housing (axial) |
| CEI EN 62026-7 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET |
| CEI EN 60603-7-1 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
| BS ISO/IEC 11801-1:2017 | Information technology. Generic cabling for customer premises General requirements |
| BS EN 60512-29-100:2015 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g |
| ISO 15003:2006 | Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions |
| 09/30208429 DC : 0 | BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 15/30330884 DC : 0 | BS EN 60512-15-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| BS EN 61076-4-115:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality Backplane connector for InfiniBand equipment |
| I.S. CECC 75301-802:1995 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| BS EN 60512-8-3:2011 | Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8c. Robustness of actuating lever |
| BS EN 60512-26-100 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| I.S. EN 2591-100:2005 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL |
| BS EN 60512-27-100:2012 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors. Tests 27a to 27g |
| 00/201724 DC : DRAFT APR 2000 | IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
| 16/30343286 DC : 0 | BS EN 2591-228 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 228: FERRULE WITHDRAWAL FORCE |
| 04/30112330 DC : 0 | IEC 61076-3-113 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-113: SCREENED, SERIAL MULTI-CONDUCTOR CABLE TO BOARD CONNECTORS SUITABLE FOR 10 GBIT/SEC DATA RATES |
| BS IEC 62790 : 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
| 17/30340055 DC : 0 | BS EN 60512-8-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT-TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| 02/206147 DC : DRAFT AUG 2002 | IEC 60603-7-4 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, UNSHIELDED) |
| BS EN 61076-3-100:2000 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| BS QC010000(1993) : AMD 10432 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
| CEI EN 61076-7-100 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| 03/100395 DC : DRAFT APR 2003 | EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| IEC 60131-1:1984 | Lever switches. Part 1: General requirements and rules for the preparation of detail specifications |
| UNE-EN 50467:2012 | Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
| NF EN 61076-3-114 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE |
| I.S. EN 62790:2015 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 60512-27-100:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G (IEC 60512-27-100:2011 (EQV)) |
| I.S. EN 61076-3-115:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
| NF EN 62852 : 2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN IEC 60512-15-2:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| I.S. EN 60512-7-2:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE CONNECTORS) - TEST 7B: MECHANICAL STRENGTH IMPACT (IEC 60512-7-2:2011 (EQV)) |
| I.S. EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 62852:2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 50548 : 2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| I.S. EN 50548:2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| I.S. EN 60352-8:2011 | SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| NF EN 2591-100 : 2006 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL |
| CEI EN 60512-29-100 : 2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
| CEI 48-20 : 1998 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 3: DETAIL SPECIFICATION FOR A RANGE OF CONNECTORS WITH TRAPEZOIDAL SHAPED METAL SHELLS AND ROUND CONTACTS - REMOVABLE CRIMP CONTACT TYPES WITH CLOSED CRIMP BARRELS, REAR INSERTION/REAR EXTRACTION |
| NF EN 60512-26-100 : 2009 AMD 1 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| DEFSTAN 59-35(PT6)SUPP002/1(2006) : 2006 | ALUMINIUM BRONZE CABLE OUTLET ACCESSORIES OF ASSESSED QUALITY - ELECTRICAL CONNECTORS MANUFACTURED IAW SPECIFICATION CECC75201.002 - CABLE OUTLET ACCESSORIES STRAIGHT AND 90 DEGREES STRAIN RELIEF |
| IEC PAS 61076-3-116:2005 | Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp |
| BS IEC 62852 : 2014 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 60512-9-3:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD |
| EN 61076-7-100 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| EN 61076-3-114 : 2009 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| EN 196000 : 92 AMD 1 2001 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: ELECTROMECHANICAL SWITCHES |
| NF EN 60352-3 : 2002 | SOLDERLESS CONNECTIONS - PART 3: SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| EN 61076-3-116 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| EN 60603-13:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
| EN 60512-8-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial |
| EN 61076-3-101:1997 | Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
| EN 60512-27-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g |
| EN 60512-29-100:2015 | Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g |
| EN 61076-7:2000 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification |
| EN 60130-17:1999 | Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| DEFSTAN 59-35(PT6)SUPP014/1(2006) : 2006 | ALUMINIUM BRONZE CABLE OUTLET ACCESSORIES OF ASSESSED QUALITY - FOR USE WITH ELECTRICAL CONNECTORS MANUFACTURED IAW DEFENCE STANDARD 59-35 PART 6 SUPPLEMENT 001 - CABLE OUTLET ACCESSORIES WITH PRE-INSTALLED HEAT SHRINKABLE MOULDED BOOTS |
| DEFSTAN 59-35(PT6)SUPP003/1(2006) : 2006 | ALUMINIUM BRONZE CABLE OUTLET ACCESSORIES OF ASSESSED QUALITY - FOR USE WITH ELECTRICAL CONNECTORS MANUFACTURED IAW DEFENCE STANDARD 59-35 PART 6 SUPPLEMENT 001 - CABLE OUTLET ACCESSORIES WITH PRE-INSTALLED HEAT SHRINKABLE MOULDED BOOTS |
| DIN EN 60352-1:1998-04 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| CEI 13-32 : 2000 | WATT-VAR-HOUR METERS FOR LOW-VOLTAGE THREE-PHASE NETWORKS (INTEGRATED UNITS) PRESETTED FOR PROCESSING AND REMOTE MANAGEMENT OF DATA WITH OR WITHOUT INSERTION OF CURRENT TRANSFORMERS |
| BS EN 175201-804:2000 | Harmonized system of quality assessment for electronic components Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling |
| 17/30334978 DC : 0 | BS EN 62946-01 ED 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 01: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ AND WITH CURRENT CARRING CAPACITY UP TO 1A |
| BS EN 60130-17:1999 | Connectors for frequencies below 3 MHz Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| I.S. EN IEC 60512-8-3:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| BS EN 61076-7:2001 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification |
| BS EN 60603-7-1:2011 | Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors |
| BS EN 62026-7:2013 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) CompoNet |
| BS EN 61076-3-101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
| BS EN 61076-2-001:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Blank detail specification |
| 17/30361901 DC : 0 | BS EN 61076-3-125 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - DETAIL SPECIFICATION FOR 2-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION UP TO 600 MHZ WITH CURRENT CARRYING CAPACITY |
| 18/30372805 DC : DRAFT APR 2018 | BS EN 60512-11-1 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 11: CLIMATIC TESTS - SECTION 1: TEST 11A - CLIMATIC SEQUENCE |
| BS EN 60352-6:1998 | Solderless connections Solderless insulation piercing connections. General requirements, test methods and practical guidance |
| NF EN 50521 : 2009 AMD 1 2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 60512-9-5:2010 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9e. Current loading, cyclic |
| BS EN 61076-7-100:2006 | Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
| CEI EN 50467 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 03/100166 DC : DRAFT JAN 2003 | IEC 60603-7-5 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ |
| 03/100167 DC : DRAFT JAN 2003 | IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ |
| CEI EN 61076-3-116 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - PROTECTIVE HOUSINGS FOR USE WITH 8- WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| 04/30112325 DC : DRAFT APR 2004 | IEC 61076-3-104 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-104: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 1000 MHZ |
| BS EN 196000:1993 | Harmonized system of quality assessment for electronic components. Generic specification. Electromechanical switches |
| BS QC 480000(1995) : 1995 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION |
| EN IEC 60512-8-3:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever |
| PREN 50467 : DRAFT 2009 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| CEI EN 60512-7-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE COMPONENTS) - TEST 7B: MECHANICAL STRENGTH IMPACT |
| BS EN 60352-1:1998 | Solderless connections Wrapped connections. General requirements, test methods and practical guidance |
| BS EN 61076-3-116:2008 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever |
| CEI EN 60352-3 : 1996 | SOLDERLESS CONNECTIONS - PART 3: SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| I.S. EN 60512-29-100:2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
| BS EN 60603-10:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type |
| NF EN 60352-8 : 2011 | SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| ISO/IEC 11801-1:2017 | Information technology — Generic cabling for customer premises — Part 1: General requirements |
| BS ISO 15003:2006 | Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions |
| I.S. EN 60603-2:1998 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| I.S. EN 60512-17-2:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION |
| CEI EN 60512-9-3 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD |
| I.S. EN 62026-7:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET (IEC 62026-7:2010 (MOD)) |
| EN IEC 60512-15-2:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) |
| UNE-EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| CEI EN 60512-8-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8B: STATIC LOAD, AXIAL |
| CEI EN 60603-1 : 2001 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
| EN 60512-28-100:2013 | Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g |
| IEC 62946-01:2018 | Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A |
| I.S. EN 60512-9-3:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD |
| IEC PAS 61076-3-110:2002 | Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz |
| IEC 60130-17:1998 | Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| IEC 60512-29-100:2015 | Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g |
| BS EN 60603-3:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing |
| 03/100442 DC : DRAFT MAY 2003 | IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60512-5:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
| I.S. EN 60603-7-1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-1: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS |
| BS EN 61076-3-110:2016 | Connectors for electronic equipment. Product requirements Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
| EN 61076-3-122:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments |
| BS EN 60352-8:2011 | Solderless connections Compression mount connections. General requirements, test methods and practical guidance |
| BS EN 60603-4:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing |
| BS EN 62790:2015 | Junction boxes for photovoltaic modules. Safety requirements and tests |
| 09/30214460 DC : 0 | BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| BS IEC 60512-1-101:2015 | Connectors for electronic equipment. Tests and measurements Blank detail specification |
| EN 196110 : 2002 | SECTIONAL SPECIFICATION - ROTARY SWITCHES - CAPABILITY APPROVAL |
| BS IEC 60512-29-100 : 2015 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 29-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON M12 STYLE CONNECTORS - TESTS 29A TO 29G |
| 09/30193787 DC : 0 | BS EN 62026-7 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET |
| BS EN 61076-3-114:2009 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type |
| 00/203602 DC : DRAFT AUG 2000 | IEC 60512-23-7 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 23-7: SCREENING AND FILTERING TESTS - TEST 23G: MEASUREMENT OF EFFECTIVE TRANSFER IMPEDANCE OF CONNECTORS |
| DD CLC/TS 50467:2008 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| CECC 75301-802 : 1994 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS |
| CEI EN 60352-8 : 2012 | SOLDERLESS CONNECTIONS - PART 8: COMPRESSION MOUNT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| CEI EN 61076-3-115 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
| BS EN 60352-4:1995 | Solderless connections Solderless non-accessible insulation displacement connections. General requirements, test methods and practical guidance |
| BS EN 60512-16-21:2012 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16u. Whisker test via the application of external mechanical stresses |
| BS EN 60512-7-2:2012 | Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7b. Mechanical strength impact |
| BS EN 60603-13:1998 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID) |
| CEI EN 60512-17-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION |
| IEC PAS 60603-7-3:2004 | Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
| BS EN 60512-9-3:2011 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load |
| I.S. EN 60512-28-100:2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON IEC 60603-7 AND IEC 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G (IEC 60512-28-100:2013(EQV)) |
| IEC PAS 61076-3-104:2002 | Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors, for data transmissions with frequencies up to 600 MHz minimum |
| CEI EN 61076-2-001 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
| I.S. EN 60130-17:1999 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES |
| CECC 75101-807 : 1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION) |
| NF EN 61076-3-116 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| NF EN 61076 3 101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTER-LINE |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| IEC PAS 61076-3-109:2001 | Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529 |
| I.S. CECC 75101-807:1994 | MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION) |
| S.R. CLC/TS 50467:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 175101-809:2004/corrigendum Jun. 2005 | DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| NF EN 60352-4 : 2001 | SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60603-7-1:2011 | Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
| UNE-EN 50521:2010 | Connectors for photovoltaic systems - Safety requirements and tests |
| EN 60352-3:1994 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
| EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| EN 60512-9-5:2010 | Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic |
| EN 60352-4:1994/A1:2000 | SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| 02/206148 DC : 0 | IEC 60603-7-5. ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ (CAT 6, SHIELDED) |
| CEI 48-19 : 1998 | RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 2: DETAIL SPECIFICATION FOR A RANGE OF CONNECTORS, WITH ASSESSED QUALITY, WITH TRAPEZOIDAL SHAPED METAL SHELLS AND ROUND CONTACTS - FIXED SOLDER CONTACT TYPES |
| BS EN 60603-9:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
| CEI EN 60512-27-100 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 27-100: SIGNAL INTEGRITY TESTS UP TO 500 MHZ ON IEC 60603-7 SERIES CONNECTORS - TESTS 27A TO 27G |
| CEI EN 60512-8-3 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| BS EN 60603-2:1998 | Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| DD IEC PAS 62026-7 : DRAFT 2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 7: COMPONET |
| CEI EN 61076-3-101 : 1998 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D/C/ LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 3: RECTANGULAR CONNECTORS - SECTION 101: DETAIL SPECIFICATION FOR A RANGE OF SHIELDED CONNECTORS WITH TRAPEZOIDAL SHAPED SHELLS AND NON-REMOVABLE RECTANGULAR CONTACTS ON A 1,27 MM X 2,54 MM CENTRE-LINE |
| CEI EN 60512-28-100 : 2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 28-100: SIGNAL INTEGRITY TESTS UP TO 1000 MHZ ON 60603-7 AND 61076-3 SERIES CONNECTORS - TESTS 28A TO 28G |
| CEI EN 60130-17 : 2001 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 17: DETAIL SPECIFICATION FOR INTERCONNECTION DEVICES WHICH PERMIT MULTI-DIRECTIONAL MATING, FOR USE WITH RECHARGEABLE BATTERIES |
| IEC 60512-15-2:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) |
| CEI EN 60352-6 : 1998 | SOLDERLESS CONNECTIONS - PART 6: INSULATION PIERCING CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| I.S. EN 60512-9-4:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING) |
| CEI EN 61076-3-122 : 1ED 2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS |
| 16/30325971 DC : 0 | BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
| IEC PAS 61076-3-114:2005 | Connectors for electronic equipment - Part 3-114: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| 03/100336 DC : DRAFT MAR 2003 | IEC 60603-7-7 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ |
| 03/100165 DC : DRAFT JAN 2003 | IEC 60603-7-2 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| I.S. EN 61076-3-122:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS |
| I.S. EN 196110:2002 | SECTIONAL SPECIFICATION: ROTARY SWITCHES - CAPABILITY APPROVAL |
| NF EN 60512-9-5 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC |
| UNE-EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| CEI EN 60352-1 : 1998 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| I.S. EN 60512-16-21:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES (IEC 60512-16-21:2012 (EQV)) |
| IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
| IEC PAS 61076-3-124:2016 | Connectors for electronic equipment - Product requirements - Part 2-124: Detail specification for 10-way, shielded, free and fixed connectors for I/O and Gigabit transmission capability for industrial applications |
| I.S. EN 60512-26-100:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| I.S. EN 61076-3-110:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ |
| IEC 60512-1-101:2015 | Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification |
| IEC PAS 61076-3-115:2005 | Connectors for electronic equipment - Part 3-115: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
| IEC 60352-6:1997 | Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
| IEC PAS 62026-7:2009 | Low-voltage switchgear and controlgear - Controller-Device Interfaces (CDIs) - Part 7: CompoNet |
| IEC 60512-8-3:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever |
| IEC 61076-4-101:2001 | Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| IEC 61076-3-116:2008 | Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever |
| IEC 61076-3-101:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
| IEC 60512-9-5:2010 | Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic |
| IEC 61076-4-100:2001 | Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| 05/30128512 DC : DRAFT JAN 2005 | IEC 61984 ED.2 - CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
| IEC 61076-3-114:2009 | Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type |
| IEC 60512-7-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact |
| IEC 61076-7-100:2006 | Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
| IEC 61076-3-100:1999 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| IEC 61076-3-110:2016 | Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
| IEC 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
| IEC 60512-16-21:2012 | Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses |
| IEC 60603-13:1995 | Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) |
| IEC 60512-17-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation |
| IEC 60512-8-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial |
| BS EN 50521 : 2009 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| IEC 60512-26-100:2008+AMD1:2011 CSV | Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g |
| IEC 60512-9-4:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) |
| IEC 60512-9-3:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load |
| EN 175201-804:1999 | Detail Specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
| CLC/TS 50467 : 2008 COR 2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 2591:1992 | Aerospace series - Elements of electrical and optical connection - Test methods - General |
| 01/207165 DC : DRAFT OCT 2001 | IEC 61076-3-110 ED.1 - CONNECTORS FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED APPLICATIONS - PART 3-110: DETAIL SPECIFICATION FOR 8 WAY CONNECTORS FOR FREQUENCIES UP TO 600 MHZ [CATEGORY 7 DETAIL SPECIFICATION] |
| 09/30210454 DC : DRAFT SEP 2009 | BS EN 60512-16-21 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES |
| BS EN 60512-8-2:2011 | Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8b. Static load, axial |
| BS EN 60512-28-100:2013 | Connectors for electronic equipment. Tests and measurements Signal integrity tests up to 1000 MHz on IEC 60603-7 and IEC 61076-3 series connectors. Tests 28a to 28g |
| CEI EN 60512-9-4 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING) |
| BS EN 60603-8:1998 | Connectors for frequencies below 3 MHz for use with printed boards Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm |
| BS EN 2591-100:2005 | Aerospace series. Elements of electrical and optical connection. Test methods General |
| I.S. EN 60512-8-2:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8B: STATIC LOAD, AXIAL |
| 12/30259533 DC : 0 | BS EN 2591-100 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 100: GENERAL |
| CEI EN 61076-3-110 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ |
| IEC 62026-7:2010 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet |
| 13/30262839 DC : 0 | BS EN 60512-1-101 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 1-101: BLANK DETAIL SPECIFICATION |
| BS EN 60603-1:2000 | Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality |
| BS EN 175101-802:2000 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| I.S. EN 60512-9-5:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC |
| BS EN 50467:2011 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| I.S. EN 61076-3-114:2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-114: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 11 RELATED TO IEC 61076-3-106 - BAYONET COUPLING TYPE |
| I.S. EN 61076-7-100:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| BS EN 175101-809:2004 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
| BS EN 60512-17-2:2011 | Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation |
| BS EN 60512-9-4:2011 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing) |
| 01/206171 DC : DRAFT AUG 2001 | |
| DIN EN 60352-3:1995-05 | Solderless connections - Part 3: Solderless accessible insulation displacement connections; general requirements, test methods and practical guidance (IEC 60352-3:1993); German version EN 60352-3:1994 |
| CEI EN 60512-9-5 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC |
| I.S. EN 50521:2008 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
| I.S. EN 61076-3-116:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| UNE-EN 50548:2012 | Junction boxes for photovoltaic modules |
| I.S. EN 60512-8-3:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| NF EN 61076-3-115 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-115: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 12 RELATED TO IEC 61076-3-106 - PUSH-PULL TYPE |
| CEI EN 60512-16-21 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES |
| PREN 50548 : DRAFT 2009 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| NF EN 50467 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 175101-809:2004 | DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
| I.S. EN 61076-2-001:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-001: CIRCULAR CONNECTORS - BLANK DETAIL SPECIFICATION |
| IEC 62847:2016 | Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
| IEC 60603-11:1992 | Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors) |
| EN 60512-26-100:2008/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| IEC 60512-27-100:2011 | Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g |
| IEC 62852:2014 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| IEC 61076-3-115:2009 | Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
| IEC 60603-2:1995 | Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features |
| EN 50548 : 2011 AMD 2 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| EN 60512-7-2:2012 | Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact |
| EN 60603-2:1998/A1:2005 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES |
| EN 61076-3-115:2010 | Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type |
| EN 60352-6:1997 | Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
| EN 50521:2008/A1:2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 175101-802:1999 | Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| EN 61076-3-110:2016 | Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
| EN 61076-3-100:2000 | Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| EN 60512-8-3:2011 | Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever |
| EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| EN 60512-9-4:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) |
| EN 60352-8:2011 | Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance |
| EN 60603-7-1:2011 | Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
| EN 60603-1:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality |
| EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 61076-2-001:2011 | Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification |
| EN 60512-16-21:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-21: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16U: WHISKER TEST VIA THE APPLICATION OF EXTERNAL MECHANICAL STRESSES |
| EN 60512-17-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation |
| EN 62026-7:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.