IEC 60512-1-1:2002
Current
Current
The latest, up-to-date edition.
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French, Spanish, Castilian
Published date
21-02-2002
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope and object
2 General
3 Features to be examined
4 Method of visual examination
5 Details to be specified
Defines a standard test method for the visual examination of electromechanical components (essentially connectors). The visual examination checks the identification, appearance, workmanship and finish of an item against the relevant specification.
| Committee |
TC 48/SC 48B
|
| DevelopmentNote |
Stability Date: 2017. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 60512-1-1 : 2002 | Identical |
| NEN EN IEC 60512-1-1 : 2002 | Identical |
| I.S. EN 60512-1-1:2002 | Identical |
| PN EN 60512-1-1 : 2005 | Identical |
| BS EN 60512-1-1:2002 | Identical |
| CEI EN 60512-1-1 : 2003 | Identical |
| EN 60512-1-1:2002 | Identical |
| JIS C 5402-1-1:2005 | Identical |
| DIN EN 60512-1-1:2003-01 | Identical |
| UNE-EN 60512-1-1:2002 | Identical |
| I.S. EN 60512-15-1:2008 | Identical |
| I.S. EN 60512-16-8:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONNECTIONS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS) |
| I.S. EN 60512-16-13:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| NF EN 60512-16-13 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| BS EN IEC 60512-15-2:2018 | Connectors for electrical and electronic equipment. Tests and measurements Connector tests (mechanical). Test 15b: Insert retention in housing (axial) |
| 08/30178258 DC : DRAFT FEB 2008 | BS EN 60512-8-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED COMPONENTS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| CEI EN 60512-17-4 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION |
| CEI EN 60512-14-2 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-2: SEALING TESTS - TEST 14B: SEALING - FINE AIR LEAKAGE |
| BS EN 60512-16-9:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force |
| NF EN 60512-15-2 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| CEI EN 60512-11-3 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS TEST 11C: DAMP HEAT, STEADY STATE |
| 14/30295302 DC : 0 | BS EN 61587-1 ED. 4.0 - MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITIONS |
| BS ISO/IEC 11801-1:2017 | Information technology. Generic cabling for customer premises General requirements |
| I.S. EN 60512-9-1:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION |
| CEI EN 60512-11-9 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS TEST 11I: DRY HEAT |
| 09/30208429 DC : 0 | BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 02/209663 DC : DRAFT OCT 2002 | IEC 60512-13-1, ED. 2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 13-1 - TEST 13A: ENGAGING AND SEPARATING FORCES |
| BS EN 60512-14-2:2006 | Connectors for electronic equipment. Tests and measurements Sealing tests - Test 14b. Sealing. Fine air leakage |
| 15/30330884 DC : 0 | BS EN 60512-15-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| CEI EN 60512-99-001 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD - TEST 99A: CONNECTORS USED IN TWISTED PAIR COMMUNICATION CABLING WITH REMOTE POWER |
| BS EN 60512-8-3:2011 | Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8c. Robustness of actuating lever |
| I.S. EN 60512-11-10:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD |
| NF EN 60512-16-7 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING |
| CEI EN 60512-11-11 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-11: CLIMATIC TESTS - TEST 11K: LOW AIR PRESSURE |
| BS EN 60512-15-5:2008 | Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15e. Contact retention in insert, cable nutation |
| I.S. EN 60512-16-5:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS) |
| 08/30178254 DC : DRAFT FEB 2008 | BS EN 60512-8-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED COMPONENTS) - TEST 8B: STATIC LOAD, AXIAL |
| BS EN 60512-12-5:2006 | Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12e. Resistance to soldering heat, soldering iron method |
| 08/30178418 DC : DRAFT FEB 2008 | BS EN 60512-17-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE) |
| BS EN 60512-15-3:2008 | Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15c. Insert retention in housing (torsional) |
| BS EN 60512-16-13:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16m. Un-wrapping, solderless wrapped connections |
| 04/30112330 DC : 0 | IEC 61076-3-113 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-113: SCREENED, SERIAL MULTI-CONDUCTOR CABLE TO BOARD CONNECTORS SUITABLE FOR 10 GBIT/SEC DATA RATES |
| BS EN 60512-15-4:2008 | Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15d. Contact insertion, release and extraction force |
| I.S. EN 60512-6-1:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-1: DYNAMIC STRESS TESTS - TEST 6A: ACCELERATION, STEADY STATE |
| NF EN 60512-15-7 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-7: CONNECTOR TESTS (MECHANICAL) - TEST 15G: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT |
| CEI EN 60512-6-1 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-1: DYNAMIC STRESS TESTS - TEST 6A: ACCELERATION, STEADY STATE |
| BS EN 60130-9:2011 | Connectors for frequencies below 3 MHz Circular connectors for radio and associated sound equipment |
| BS EN 60512-13-2:2006 | Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13b. Insertion and withdrawal forces |
| 03/100395 DC : DRAFT APR 2003 | EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| 15/30327728 DC : 0 | BS EN 60512-99-002 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-002: ENDURANCE TEST SCHEDULES - TEST 99B: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD CONNECTORS |
| BS EN 60512-6-3:2002 | Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6c. Shock |
| BS EN 60512-11-12:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11m. Damp heat, cyclic |
| CEI EN 60512-16-4 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 16-4: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16D: TENSILE STRENGTH (CRIMPED CONNECTIONS) |
| NF EN 60512-15-4 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-4: CONNECTOR TESTS (MECHANICAL) - TEST 15D: CONTACT INSERTION, RELEASE AND EXTRACTION FORCE |
| CEI EN 60512-5-1 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 5-1: CURRENT-CARRYING CAPACITY TESTS - TEST 5A: TEMPERATURE RISE |
| UNE-EN 50467:2012 | Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
| I.S. EN 60512-8-2:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8B: STATIC LOAD, AXIAL |
| I.S. EN 60512-16-11:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| I.S. EN 60130-9:2011 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT |
| CEI EN 60512-12-5 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-5: SOLDERING TESTS - TEST 12E: RESISTANCE TO SOLDERING HEAT, IRON METHOD |
| CEI EN 60512-15-2 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| I.S. EN 60512-15-2:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| I.S. EN IEC 60512-15-2:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| I.S. EN 60512-7-2:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE CONNECTORS) - TEST 7B: MECHANICAL STRENGTH IMPACT (IEC 60512-7-2:2011 (EQV)) |
| I.S. EN 60512-6-4:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-4: DYNAMIC STRESS TESTS - TEST 6D: VIBRATION (SINUSOIDAL) |
| I.S. EN 60512-8-1:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE |
| I.S. EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| CEI EN 60512-15-7 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-7: CONNECTOR TESTS (MECHANICAL) - TEST 15G: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT |
| CEI EN 60512-14-5 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-5: SEALING TESTS - TEST 14E: IMMERSION - LOW (AIR) PRESSURE |
| CEI EN 60512-16-16 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS |
| I.S. EN 60512-12-3:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-3: SOLDERING TESTS - TEST 12C: SOLDERABILITY, DE-WETTING |
| I.S. EN 60512-11-12:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-12: CLIMATIC TESTS - TEST 11M: DAMP HEAT, CYCLIC |
| I.S. EN 60512-16-3:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-3: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16C: CONTACT-BENDING STRENGTH |
| CEI EN 60512-14-4 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-4: SEALING TESTS - TEST 14D: IMMERSION - WATERPROOF |
| CEI EN 60512-16-18 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION |
| CEI EN 60512-16-9 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| NF EN 60512-17-3 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE) |
| NF EN 60512-15-3 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-3: CONNECTOR TESTS (MECHANICAL) - TEST 15C: INSERT RETENTION IN HOUSING (TORSIONAL) |
| IEC 60512-11-7:2003 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test |
| NF EN 60512-7-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED) |
| CEI EN 60512-16-13 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UNWRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| I.S. EN 60512-12-2:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-2: SOLDERING TESTS - TEST 12B: SOLDERABILITY, WETTING, SOLDERING IRON METHOD |
| I.S. EN 60512-6-2:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-2: DYNAMIC STRESS TESTS - TEST 6B: BUMP |
| I.S. EN 60512-17-4:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION |
| I.S. EN 60512-14-4:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-4: SEALING TESTS - TEST 14D: IMMERSION - WATERPROOF |
| IEC 60512-11-6:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist |
| EN 60512-5-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise |
| EN 60512-9-3:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD |
| EN 60512-15-3:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) |
| EN 60512-14-4:2006 | Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof |
| EN 60512-13-1:2006/corrigendum Dec. 2006 | Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces |
| EN 60512-15-4:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force |
| EN 60512-17-3 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE) |
| EN 60512-15-2 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-2: CONNECTOR TESTS (MECHANICAL) - TEST 15B: INSERT RETENTION IN HOUSING (AXIAL) |
| EN 60512-16-6:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations |
| EN 60512-11-12:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic |
| EN 60512-8-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial |
| EN 60512-15-7:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment |
| EN 60512-16-18 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION |
| EN 60512-13-5:2006/corrigendum Dec. 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD |
| EN 60512-16-4:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) |
| EN 60512-17-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness |
| EN 60512-11-7:2003 | Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test |
| EN 60512-11-9:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat |
| EN 60512-16-1 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE |
| EN 60512-11-10:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold |
| EN 60512-16-11 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| EN 60512-15-1 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT RETENTION IN INSERT |
| EN 60512-16-13 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-13: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16M: UN-WRAPPING, SOLDERLESS WRAPPED CONNECTIONS |
| EN 60512-13-2 : 2006 COR 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-2: MECHANICAL OPERATION TESTS - TEST 13B: INSERTION AND WITHDRAWAL FORCES |
| CEI EN 60512-12-3 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-3: SOLDERING TESTS - TEST 12C: SOLDERABILITY, DE-WETTING |
| NF EN 60512-15-1 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT RETENTION IN INSERT |
| 02/209660 DC : DRAFT OCT 2002 | IEC 60512-12-3, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT BASIC TESTING AND MEASUREMENTS - PART 12-3 - TEST 12C: SOLDERABILITY, DE-WETTING |
| I.S. EN IEC 60512-8-3:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| NF EN 60512-9-1 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION |
| 17/30361901 DC : 0 | BS EN 61076-3-125 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - DETAIL SPECIFICATION FOR 2-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION UP TO 600 MHZ WITH CURRENT CARRYING CAPACITY |
| BS EN 60512-17-1:2010 | Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17a. Cable clamp robustness |
| BS EN 60512-8-1:2010 | Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8a. Static load, transverse |
| BS EN 60512-11-10:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11j. Cold |
| BS EN 60512-12-1:2006 | Connectors for electronic equipment. Tests and measurements Soldering tests - Test 12a. Solderability, wetting, solder bath method |
| 18/30372805 DC : DRAFT APR 2018 | BS EN 60512-11-1 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 11: CLIMATIC TESTS - SECTION 1: TEST 11A - CLIMATIC SEQUENCE |
| NF EN 60512-16-14 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS |
| NF EN 60512 11-7 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST |
| BS EN 60512-9-5:2010 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9e. Current loading, cyclic |
| PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
| I.S. EN 60512-15-5:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-5: CONNECTOR TESTS (MECHANICAL) - TEST 15E: CONTACT RETENTION IN INSERT, CABLE NUTATION |
| I.S. EN 60512-13-2:2006/AC:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-2: MECHANICAL OPERATION TESTS - TEST 13B: INSERTION AND WITHDRAWAL FORCES |
| NF EN 60512-17-4 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION |
| BS EN 60512-15-6:2008 | Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15f. Effectiveness of connector coupling devices |
| CEI EN 50467 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 03/100167 DC : DRAFT JAN 2003 | IEC 60603-3-105 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-105: DETAIL SPECIFICATION FOR 4 PAIR BALANCED, INDIVIDUALLY SHIELDED, FIXED AND FREE CONNECTORS WITH CHARACTERISTIC IMPEDENCE OF 100 OHMS, COVERING A FREQUENCY RANGE FROM DC TO 1500 MHZ |
| BS EN 60512-16-4:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16d. Tensile strength (crimped connections) |
| BS EN 60512-11-6:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11f. Corrosion, salt mist |
| 17/30340055 DC : 0 | BS EN 60512-8-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT-TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| CEI EN 60512-9-1 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION |
| EN IEC 60512-8-3:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever |
| PREN 50467 : DRAFT 2009 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| BS EN 60512-16-3:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16c. Contact-bending strength |
| CEI EN 60512-16-5 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS) |
| CEI EN 60512-7-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE COMPONENTS) - TEST 7B: MECHANICAL STRENGTH IMPACT |
| I.S. EN 60512-11-7:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST |
| NF EN 60512-16-1 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE |
| I.S. EN 60512-5-1:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 5-1: CURRENT-CARRYING CAPACITY TESTS - TEST 5A: TEMPERATURE RISE |
| CEI EN 60512-12-1 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-1: SOLDERING TESTS - TEST 12A: SOLDERABILITY, WETTING, SOLDER BATH METHOD |
| I.S. EN 60512-13-1:2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-1: MECHANICAL OPERATION TESTS - TEST 13A: ENGAGING AND SEPARATING FORCES |
| I.S. EN 60512-6-3:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-3: DYNAMIC STRESS TESTS - TEST 6C: SHOCK |
| CEI EN 60512-16-8 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONNECTIONS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS) |
| I.S. EN 60512-11-6:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-6: CLIMATIC TESTS - TEST 11F: CORROSION, SALT MIST |
| I.S. EN 60512-17-2:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION |
| CEI EN 60512-9-3 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD |
| I.S. EN 60512-16-17:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-17: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16Q: TENSILE AND COMPRESSIVE STRENGTH, FIXED MALE TABS |
| BS EN 61587-1:2017 | Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| NF EN 60512-16-17 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-17: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16Q: TENSILE AND COMPRESSIVE STRENGTH, FIXED MALE TABS |
| I.S. EN 60512-12-4:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-4: SOLDERING TESTS - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD |
| ISO/IEC 24739-1:2009 | Information technology AT Attachment with Packet Interface - 7 Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1) |
| EN IEC 60512-15-2:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) |
| IEC 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| CEI EN 60512-9-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE |
| NF EN 60512-15-5 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-5: CONNECTOR TESTS (MECHANICAL) - TEST 15E: CONTACT RETENTION IN INSERT, CABLE NUTATION |
| CEI EN 60512-8-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-2: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8B: STATIC LOAD, AXIAL |
| IEC 62946-01:2018 | Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A |
| I.S. EN 60512-9-3:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD |
| IEC PAS 61076-3-126:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking |
| I.S. EN 60512-11-11:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-11: CLIMATIC TESTS - TEST 11K: LOW AIR PRESSURE |
| IEC 60512-15-1:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert |
| IEC 60512-16-3:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength |
| IEC 60512-17-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness |
| IEC 60512-13-5:2006 | Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method |
| IEC 60512-19-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels |
| 02/209659 DC : DRAFT OCT 2001 | IEC 60512-12-2, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-2 - TEST 12B: SOLDERABILITY, WETTING, IRON METHOD |
| EN 61076-3-122:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments |
| 08/30178414 DC : DRAFT FEB 2008 | BS EN 60512-17-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION |
| CEI EN 60512-11-13 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 11-13: CLIMATIC TESTS - TEST 11N: GAS TIGHTNESS, SOLDERLESS WRAPPED CONNECTIONS |
| 08/30178299 DC : DRAFT FEB 2008 | BS EN 60512-9-4 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING) |
| BS EN 60512-13-5:2006 | Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13e. Polarizing and keying method |
| CEI EN 60512-8-3 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| NF EN 60512-16-8 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONNECTIONS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS) |
| 08/30178250 DC : DRAFT FEB 2008 | BS EN 60512-8-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED COMPONENTS) - TEST 8A: STATIC LOAD, TRANSVERSE |
| BS EN 60512-11-3:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11c. Damp heat, steady state |
| BS EN 60512-19-1:2010 | Connectors for electronic equipment. Tests and measurements Chemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels |
| BS EN 60512-16-6:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations |
| 02/209662 DC : DRAFT OCT 2002 | IEC 60512-12-5, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-5 - TEST 12E: RESISTANCE TO SOLDERING HEAT, IRON METHOD |
| 02/209661 DC : DRAFT OCT 2002 | IEC 60512-12-4, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-4 - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD |
| NF EN 60512-15-6 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-6: CONNECTOR TESTS (MECHANICAL) - TEST 15F: EFFECTIVENESS OF CONNECTOR COUPLING DEVICES |
| BS EN 60512-16-17:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16q. Tensile and compressive strength, fixed male tabs |
| BS EN 60512-16-11:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections |
| NF EN 60512-16-9 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| BS EN 60512-6-1:2002 | Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6a. Acceleration, steady state |
| BS EN 60512-5-1:2002 | Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests Test 5a. Temperature rise |
| DD CLC/TS 50467:2008 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| BS EN 60512-11-11:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11k. Low air pressure |
| BS EN 60512-11-13:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11n. Gas tightness, solderless wrapped connections |
| 08/30178233 DC : DRAFT FEB 2008 | BS EN 60512-7-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE COMPONENTS) - TEST 7A: FREE FALL (REPEATED) |
| 04/30124126 DC : DRAFT OCT 2004 | IEC 61076-2-104 ED.1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M8 CONNECTORS WITH SCREW OR SNAP-LOCKING FOR LOW VOLTAGE APPLICATIONS |
| BS EN 60512-7-2:2012 | Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7b. Mechanical strength impact |
| BS EN 60512-14-4:2006 | Connectors for electronic equipment. Tests and measurements Sealing tests - Test 14d. Immersion. Waterproof |
| CEI EN 61587-1 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION |
| CEI EN 60512-17-2 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-2: CABLE CLAMPING TESTS - TEST 17B: CABLE CLAMP RESISTANCE TO CABLE ROTATION |
| BS EN 60512-12-3:2006 | Connectors for electronic equipment. Tests and measurements Soldering tests - Solderability, de-wetting |
| BS EN 60512-7-1:2010 | Connectors for electronic equipment. Tests and measurements Impact tests (free connectors). Test 7a. Free fall (repeated) |
| BS EN 60512-11-7:2003 | Connectors for electronic equipment. Tests and measurements Flowing mixed gas corrosion test |
| BS EN 60512-9-3:2011 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load |
| NF EN 60512-16-3 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-3: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16C: CONTACT-BENDING STRENGTH |
| EN IEC 61076-2-111:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking |
| I.S. EN 60512-16-18:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION |
| I.S. EN 60512-16-9:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| I.S. EN 60512-15-4:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-4: CONNECTOR TESTS (MECHANICAL) - TEST 15D: CONTACT INSERTION, RELEASE AND EXTRACTION FORCE |
| I.S. EN 60512-11-9:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS - TEST 11I: DRY HEAT |
| I.S. EN 60512-16-14:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS |
| I.S. EN 60512-16-4:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-4: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16D: TENSILE STRENGTH (CRIMPED CONNECTIONS) |
| I.S. EN 60512-12-5:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-5: SOLDERING TESTS - TEST 12E: RESISTANCE TO SOLDERING HEAT, SOLDERING IRON METHOD |
| I.S. EN 60512-17-1:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS |
| I.S. EN 60512-12-1:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-1: SOLDERING TESTS - TEST 12A: SOLDERABILITY, WETTING, |
| I.S. EN 60512-14-2:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-2: SEALING TESTS - TEST 14B: SEALING - FINE AIR LEAKAGE |
| I.S. EN 60512-9-2:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE (IEC 60512-9-2:2011 (EQV)) |
| I.S. EN 60512-15-7:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-7: CONNECTOR TESTS (MECHANICAL) - TEST 15G: ROBUSTNESS OF PROTECTIVE COVER ATTACHMENT |
| ISO/IEC 24739-2:2009 | Information technology AT Attachment with Packet Interface - 7 Part 2: Parallel transport protocols and physical interconnect (ATA/ATAPI-7) |
| CEI EN 60512-15-3 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-3: CONNECTOR TESTS (MECHANICAL) - TEST 15C: INSERT RETENTION IN HOUSING (TORSIONAL) |
| CEI EN 60512-17-3 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE) |
| CEI EN 60512-15-4 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-4: CONNECTOR TESTS (MECHANICAL) - TEST 15D: CONTACT INSERTION, RELEASE AND EXTRACTION FORCE |
| CEI EN 60512-15-1 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT RETENTION IN INSERT |
| CEI EN 60512-16-11 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| NF EN 60512-19-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PRE-INSULATED CRIMP BARRELS |
| I.S. EN 61076-3-104:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
| S.R. CLC/TS 50467:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 61587-1:2017 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION |
| EN 175101-809:2004/corrigendum Jun. 2005 | DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY |
| IEC 60512-13-1:2006 | Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces |
| IEC 60512-17-4:2010 | Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion |
| IEC 60512-12-3:2006 | Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting |
| EN 60512-9-5:2010 | Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic |
| CEI EN 60512-6-2 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-2: DYNAMIC STRESS TESTS TEST 6B: BUMP |
| I.S. EN 60512-16-7:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING |
| BS EN 60512-99-001:2012 | Connectors for electronic equipment. Tests and measurements Test schedule for engaging and separating connectors under electrical load. Test 99a: Connectors used in twisted pair communication cabling with remote power |
| BS EN 61076-3-122:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments |
| 03/100442 DC : DRAFT MAY 2003 | IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| CEI EN 60512-16-17 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-17: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16Q: TENSILE AND COMPRESSIVE STRENGTH, FIXED MALE TABS |
| CEI EN 60512-17-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS |
| BS EN 60512-12-4:2006 | Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12d. Resistance to soldering heat, solder bath method |
| 02/209664 DC : DRAFT OCT 2002 | IEC 60512-13-2, ED. 1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 13-2 - TEST 13B: INSERTION AND WITHDRAWAL FORCES |
| 08/30178422 DC : DRAFT FEB 2008 | BS EN 60512-17-4 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-4: CABLE CLAMPING TESTS - TEST 17D: CABLE CLAMP RESISTANCE TO CABLE TORSION |
| IEC 61587-1:2016 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| CEI EN 60512-15-5 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-5: CONNECTOR TESTS (MECHANICAL) - TEST 15E: CONTACT RETENTION IN INSERT, CABLE NUTATION |
| 02/209665 DC : DRAFT OCT 2002 | IEC 60512-13-5, ED. 1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 13-5 - TEST 13E: POLARIZING AND KEYING METHOD |
| ISO/IEC 11801-1:2017 | Information technology — Generic cabling for customer premises — Part 1: General requirements |
| BS EN 60512-11-5:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11e. Mould growth |
| 08/30178276 DC : DRAFT FEB 2008 | BS EN 60512-9-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION |
| 09/30197932 DC : 0 | BS EN 60512-99-001 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR MATING AND UN-MATING CONNECTORS UNDER ELECTRICAL LOAD - POWER OVER THE INTERNET (PLUS) POEP, PARTICULARLY APPLICABLE TO IEC 60603-7 SERIES CONNECTORS |
| I.S. EN 60512-16-16:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS |
| IEC 60512-15-2:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) |
| I.S. EN 60512-9-4:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING) |
| BS EN 60512-12-2:2006 | Connectors for electronic equipment. Tests and measurements Soldering tests. Test 12b. Solderability, wetting, soldering iron method |
| BS EN 60512-16-16:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs |
| NF EN 60512-16-18 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-18: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16R: DEFLECTION OF CONTACTS, SIMULATION |
| I.S. EN 60512-19-1:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PRE-INSULATED CRIMP BARRELS |
| BS EN 60512-15-7:2008 | Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15g. Robustness of protective cover attachment |
| I.S. EN 60512-99-001:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 99-001: TEST SCHEDULE FOR ENGAGING AND SEPARATING CONNECTORS UNDER ELECTRICAL LOAD - TEST 99A: CONNECTORS USED IN TWISTED PAIR COMMUNICATION CABLING WITH REMOTE POWER (IEC 60512-99-001:2012 (EQV)) |
| I.S. EN 60512-11-13:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 11-13: CLIMATIC TESTS - TEST 11N: GAS TIGHTNESS, SOLDERLESS WRAPPED CONNECTIONS |
| BS EN 60512-16-18:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16r. Deflection of contacts, simulation |
| BS EN 60512-9-2:2012 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9b. Electrical load and temperature |
| BS EN 60512-11-4:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11d. Rapid change of temperature |
| BS EN 60512-16-2:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16b. Restricted entry |
| 08/30178457 DC : DRAFT FEB 2008 | BS EN 60512-21-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 21-1: R.F. RESISTANCE TESTS - TEST 21A: R.F. SHUNT RESISTANCE |
| CEI EN 60512-16-3 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-3: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16C: CONTACT-BENDING STRENGTH |
| CEI EN 60512-11-5 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-5: CLIMATIC TESTS TEST 11E: MOULD GROWTH |
| EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
| CEI EN 61076-3-122 : 1ED 2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS |
| CEI EN 60512-13-2 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-2: MECHANICAL OPERATION TESTS - TEST 13B: INSERTION AND WITHDRAWAL FORCES |
| BS EN 60512-16-7:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping |
| BS EN 60512-16-5:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient contacts) |
| BS EN 60512-15-1:2008 | Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15a. Contact retention in insert |
| 08/30178461 DC : DRAFT FEB 2008 | BS EN 60512-22-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 22-1: CAPACITANCE TESTS - TEST 22A: CAPACITANCE |
| CEI EN 60512-19-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PREINSULATED CRIMP BARRELS |
| BS EN 60512-16-1:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16a. Probe damage |
| 08/30178306 DC : DRAFT FEB 2008 | BS EN 60512-9-5 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC |
| BS EN 60512-9-1:2010 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9a. Mechanical operation |
| 16/30325971 DC : 0 | BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60512-16-6:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-6: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16F: ROBUSTNESS OF TERMINATIONS |
| 08/30178237 DC : DRAFT FEB 2008 | BS EN 60512-7-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-2: IMPACT TESTS (FREE COMPONENTS) - TEST 7B: MECHANICAL STRENGTH IMPACTS AND MEASUREMENTS |
| 08/30178289 DC : DRAFT FEB 2008 | BS EN 60512-9-2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE |
| CEI EN 60512-13-1 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-1: MECHANICAL OPERATION TESTS - TEST 13A: ENGAGING AND SEPARATING FORCES |
| BS EN 60512-16-8:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16h. Insulating grip effectiveness (crimped connections) |
| 02/209669 DC : DRAFT OCT 2002 | IEC 60512-14-6 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 14-6 - TEST 14F: IMMERSION - LOW (AIR) PRESSURE INTERFACIAL |
| NF EN 60512-16-2 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY |
| BS EN 60512-6-4:2002 | Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6d. Vibration (sinusoidal) |
| BS EN 60512-15-2:2008 | Connectors for electronic equipment. Tests and measurements Connector tests (mechanical). Test 15b. Insert retention in housing (axial) |
| I.S. EN 60512-15-3:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-3: CONNECTOR TESTS (MECHANICAL) - TEST 15C: INSERT RETENTION IN HOUSING (TORSIONAL) |
| I.S. EN 60512-16-1:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE |
| I.S. EN 61076-3-122:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS |
| I.S. EN 60512-13-5:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD |
| I.S. EN 60512-8-3:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-3: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8C: ROBUSTNESS OF ACTUATING LEVER |
| I.S. EN 60512-16-2:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY |
| NF EN 60512-9-5 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC |
| NF EN 60512-16-5 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-5: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16E: GAUGE RETENTION FORCE (RESILIENT CONTACTS) |
| NF EN 60512-8-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE |
| CEI EN 60512-13-5 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD |
| I.S. EN 60512-15-6:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-6: CONNECTOR TESTS (MECHANICAL) - TEST 15F: EFFECTIVENESS OF CONNECTOR COUPLING DEVICES |
| IEC 60512-8-3:2018 | Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever |
| IEC 60512-6-4:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) |
| IEC 60512-9-5:2010 | Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic |
| IEC 60512-12-5:2006 | Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method |
| IEC 60512-11-10:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold |
| IEC 60512-16-17:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs |
| IEC 60512-7-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) |
| IEC 60512-16-18:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation |
| EN 60512-12-3:2006/corrigendum Dec. 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-3: SOLDERING TESTS - TEST 12C: SOLDERABILITY, DE-WETTING |
| IEC 60512-16-13:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections |
| IEC 60512-14-2:2006 | Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage |
| IEC 60512-6-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state |
| IEC 60512-11-3:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state |
| IEC 60512-13-2:2006 | Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces |
| IEC 60512-16-7:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping |
| IEC 60512-7-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact |
| IEC 60512-14-4:2006 | Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof |
| IEC 60512-11-11:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure |
| IEC 60512-12-2:2006 | Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method |
| IEC 60512-9-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature |
| IEC 60512-99-001:2012 | Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power |
| IEC 60512-9-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation |
| IEC 60512-11-13:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections |
| IEC 60512-15-6:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices |
| IEC 60512-15-3:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) |
| IEC 60512-8-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse |
| IEC 60512-15-4:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force |
| IEC 60512-16-1:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage |
| IEC 60512-11-9:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat |
| IEC 60512-17-3:2010 | Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) |
| IEC 60512-17-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation |
| IEC 60512-11-5:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth |
| IEC 60512-6-3:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock |
| IEC 60130-9:2011 | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
| IEC 60512-8-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial |
| IEC 60512-6-2:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump |
| IEC 60512-16-16:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs |
| IEC 60512-16-6:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations |
| IEC 60512-16-5:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) |
| IEC 60512-15-7:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment |
| IEC 60512-11-4:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature |
| IEC 60512-9-4:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) |
| IEC 60512-16-14:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs |
| IEC 60512-5-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise |
| IEC 60512-14-5:2006 | Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure |
| IEC 60512-9-3:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load |
| IEC 60512-16-2:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry |
| IEC 60512-12-4:2006 | Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method |
| CLC/TS 50467 : 2008 COR 2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 60512-11-4:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-4: CLIMATIC TESTS - TEST 11D: RAPID CHANGE OF TEMPERATURE |
| 17/30340059 DC : 0 | BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ |
| I.S. EN 60512-14-5:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 14-5: SEALING TESTS - TEST 14E: IMMERSION AT LOW AIR PRESSURE |
| BS EN 60512-8-2:2011 | Connectors for electronic equipment. Tests and measurements Static load tests (fixed connectors). Test 8b. Static load, axial |
| EN 61587-1:2017 | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation |
| CEI EN 60512-16-2 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY |
| 08/30178449 DC : DRAFT FEB 2008 | BS EN 60512-20-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 20-1: FIRE HAZARD TESTS - TEST 20A: FLAMMABILITY, NEEDLE-FLAME |
| BS EN 60512-17-4:2010 | Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion |
| 17/30334978 DC : 0 | BS EN 62946-01 ED 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 01: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED HIGH DENSITY CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ AND WITH CURRENT CARRING CAPACITY UP TO 1A |
| 02/209658 DC : DRAFT OCT 2002 | IEC 60512-12-1, ED. 1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - BASIC TESTING AND MEASUREMENTS - PART 12-1 - TEST 12A: SOLDERABILITY, WETTING, SOLDER BATH METHOD |
| CEI EN 60512-15-6 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-6: CONNECTOR TESTS (MECHANICAL) - TEST 15F: EFFECTIVENESS OF CONNECTOR COUPLING DEVICES |
| CEI EN 60512-9-4 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-4: ENDURANCE TESTS - TEST 9D: DURABILITY OF CONTACT RETENTION SYSTEM AND SEALS (MAINTENANCE, AGEING) |
| CEI EN 60512-11-7 : 2004 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11- 7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST |
| CEI EN 60512-11-10 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD |
| CEI EN 60512-6-4 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 6-4: DYNAMIC STRESS TESTS TEST 6D: VIBRATION (SINUSOIDAL) |
| BS EN 60512-17-3:2010 | Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile) |
| 08/30188248 DC : DRAFT AUG 2008 | BS EN 60512-9-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C - MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD |
| 08/30178453 DC : DRAFT FEB 2008 | BS EN 60512-20-3 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 20-3: FIRE HAZARD TESTS - TEST 20C: FLAMMABILITY, GLOW-WIRE |
| BS EN 60512-13-1:2006 | Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13a: Engaging and separating forces |
| 03/100168 DC : DRAFT JAN 2003 | IEC 61076-3-112 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 3-112: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION - RECTANGULAR CONNECTORS WITH FOUR CONTACTS FOR HIGH PERFORMANCE SERIAL BUS FOR CONSUMER AUDIO/VIDEO EQUIPMENT |
| 04/30124122 DC : DRAFT OCT 2004 | IEC 61076-2-101 ED.2 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-101: CIRCULAR CONNECTORS. DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING FOR LOW VOLTAGE APPLICATIONS |
| CEI EN 60512-12-2 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-2: SOLDERING TESTS - TEST 12B: SOLDERABILITY, WETTING, SOLDERING IRON METHOD |
| CEI EN 60512-16-14 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS |
| I.S. EN 60512-15-1:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 15-1: CONNECTOR TESTS (MECHANICAL) - TEST 15A: CONTACT IN INSERT |
| I.S. EN 60512-9-5:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC |
| BS EN 60512-14-5:2006 | Connectors for electronic equipment. Tests and measurements Sealing tests - Test 14e. Immersion at low air pressure |
| BS EN 50467:2011 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| 08/30178410 DC : DRAFT FEB 2008 | BS EN 60512-17-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS |
| 08/30178445 DC : DRAFT FEB 2008 | BS EN 60512-19-1 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 19-1: CHEMICAL RESISTANCE TESTS - TEST 19A: FLUID RESISTANCE OF PRE-INSULATED CRIMP BARRELS |
| BS EN 60512-16-14:2008 | Connectors for electronic equipment. Tests and measurements Mechanical tests on contacts and terminations. Test 16n. Bending strength, fixed male tabs |
| BS EN 175101-809:2004 | Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
| BS EN 60512-17-2:2011 | Connectors for electronic equipment. Tests and measurements Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation |
| BS EN 60512-11-9:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11i. Dry heat |
| BS EN 61076-3-104:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| BS EN 60512-9-4:2011 | Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing) |
| CEI EN 60512-16-6 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-6: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16F: ROBUSTNESS OF TERMINATIONS |
| 03/100365 DC : DRAFT APR 2003 | IEC 60512-9-3 ED.1.0 - CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: TEST 9C - MECHANICAL OPERATION WITH ELECTRICAL LOAD |
| CEI EN 60512-6-3 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 6-3: DYNAMIC STRESS TESTS TEST 6C: SHOCK |
| BS EN 60512-6-2:2002 | Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6b. Bump |
| CEI EN 60512-9-5 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC |
| I.S. EN 60512-17-3:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-3: CABLE CLAMPING TESTS - TEST 17C: CABLE CLAMP RESISTANCE TO CABLE PULL (TENSILE) |
| CEI EN 60130-9 : 2012 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT |
| NF EN 60512-16-4 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-4: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16D: TENSILE STRENGTH (CRIMPED CONNECTIONS) |
| NF EN 60512-16-16 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS |
| NF EN 60512 13-1 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-1: MECHANICAL OPERATION TESTS - TEST 13A: ENGAGING AND SEPARATING FORCES |
| NF EN 60512-17-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 17-1: CABLE CLAMPING TESTS - TEST 17A: CABLE CLAMP ROBUSTNESS |
| I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| CEI EN 60512-11-6 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 11-6: CLIMATIC TESTS TEST 11F: CORROSION, SALT MIST |
| CEI EN 60512-8-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE |
| I.S. EN IEC 61076-2-111:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| CEI EN 60512-16-7 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING |
| I.S. EN 60512-11-5:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-5: CLIMATIC TESTS - TEST 11E: MOULD GROWTH |
| NF EN 60512-16-11 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-11: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16K: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
| NF EN 60512-16-6 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-6: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16F: ROBUSTNESS OF TERMINATIONS |
| CEI EN 60512-12-4 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS -PART 12-4: SOLDERING TESTS - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD |
| CEI EN 60512-7-1 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED) |
| CEI EN 60512-16-1 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-1: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16A: PROBE DAMAGE |
| NF EN 50467 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| CEI EN 60512-11-12 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-12: CLIMATIC TESTS - TEST 11M: DAMP HEAT, CYCLIC |
| CEI EN 60512-11-4 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 11-4: CLIMATIC TESTS TEST 11D: RAPID CHANGE OF TEMPERATURE |
| I.S. EN 60512-11-3:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS - TEST 11C: DAMP HEAT, STEADY STATE |
| I.S. EN 175101-809:2004 | DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY |
| I.S. EN 60512-7-1:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 7-1: IMPACT TESTS (FREE CONNECTORS) - TEST 7A: FREE FALL (REPEATED) |
| ISO/IEC 24739-3:2010 | Information technology AT Attachment with Packet Interface - 7 Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3) |
| IEC 62847:2016 | Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
| EN 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| IEC 60512-12-1:2006 | Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method |
| IEC 60512-11-12:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic |
| IEC 60512-16-4:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) |
| IEC 60512-16-8:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) |
| IEC 60512-16-11:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections |
| IEC 60512-15-5:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation |
| IEC 60512-16-9:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force |
| EN 60512-7-2:2012 | Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact |
| EN 60512-6-2:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump |
| EN 60512-16-5:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) |
| EN 60512-12-5:2006/corrigendum:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-5: SOLDERING TESTS - TEST 12E: RESISTANCE TO SOLDERING HEAT, SOLDERING IRON METHOD |
| EN 60512-19-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels |
| EN 60130-9:2011 | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
| EN 60512-16-7 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-7: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16G: MEASUREMENT OF CONTACT DEFORMATION AFTER CRIMPING |
| EN 60512-8-3:2011 | Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever |
| EN 60512-11-4:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature |
| EN 60512-16-2 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-2: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16B: RESTRICTED ENTRY |
| EN 60512-9-2:2012 | Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature |
| EN 60512-16-16 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-16: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16P: TORSIONAL STRENGTH, FIXED MALE TABS |
| EN 60512-12-2:2006/corrigendum Dec. 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-2: SOLDERING TESTS - TEST 12B: SOLDERABILITY, WETTING, SOLDERING IRON METHOD |
| EN 60512-15-5 : 2008 | Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation |
| EN 60512-9-4:2011 | Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) |
| EN 60512-17-4 : 2010 | Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion |
| EN 60512-7-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) |
| EN 60512-16-8 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-8: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16H: INSULATING GRIP EFFECTIVENESS (CRIMPED CONNECTIONS) |
| EN 60512-9-1:2010 | Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation |
| EN 60512-16-3:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength |
| EN 60512-16-9 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-9: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16I: GROUNDING CONTACT SPRING HOLDING FORCE |
| EN 60512-11-6:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist |
| EN 60512-11-3:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state |
| EN 60512-15-6:2008 | Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices |
| EN 60512-11-5:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth |
| EN 60512-14-5:2006 | Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure |
| EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 60512-6-4:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) |
| EN 60512-8-1:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 8-1: STATIC LOAD TESTS (FIXED CONNECTORS) - TEST 8A: STATIC LOAD, TRANSVERSE |
| EN 60512-6-1:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state |
| EN 60512-11-13:2002 | Connectors for electronic equipment - Tests and measurement - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections |
| EN 60512-6-3:2002 | Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock |
| EN 60512-12-4:2006/corrigendum:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 12-4: SOLDERING TESTS - TEST 12D: RESISTANCE TO SOLDERING HEAT, SOLDER BATH METHOD |
| EN 60512-14-2:2006 | Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage |
| EN 60512-16-17:2008 | Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs |
| EN 60512-99-001:2012 | Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power |
| EN 60512-12-1:2006 | Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method |
| EN 60512-16-14 : 2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 16-14: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS - TEST 16N: BENDING STRENGTH, FIXED MALE TABS |
| EN 60512-11-11:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure |
| EN 60512-17-2:2011 | Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.