IEC 60364-4-42:2010+AMD1:2014 CSV
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
22-11-2024
Superseded by
Language(s)
English - French
Published date
13-11-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
420.1 Scope
420.2 Normative references
420.3 Terms and definitions
421 Protection against fire caused by electrical
equipment
422 Precautions where particular risks of fire exist
423 Protection against burns
424 Protection against overheating
Annex A (informative) - List of notes concerning certain
countries
Annex B (informative) - Arc fault detection devices (AFDD)
Bibliography
IEC 60364-4-42:2010+A1:2014 applies to electrical installations with regard to measures for the protection of persons, livestock and property against:
- thermal effects, combustion or degradation of materials, and risk of burns caused by electrical equipment,
- flames in case of a fire hazard being propagated from electrical installations to other fire compartments segregated by barriers which are in the vicinity, and
- the impairment of the safe functioning of electrical equipment including safety services.
This third edition cancels and replaces the second edition, published in 2001, and constitutes a technical revision. The main changes with respect to the previous edition are listed below:
- The scope now includes protection against all thermal effects and flames in case of a fire hazard being propagated from electrical installations to other fire compartments segregated by barriers which are in the vicinity.
- Requirements associated with escape routes for evacuation in an emergency have been expanded/modified.
- Requirements associated with the nature of processed or stored materials have been expanded/modified.
- Requirements associated with combustible constructional materials have been expanded/modified.
- Requirements associated with fire propagating structures have been modified slightly.
- New requirements for the selection and erection of installations in locations which might endanger precious goods have been added.
- Protection against overheating now includes space heating appliances. This consolidated version consists of the third edition (2010) and its amendment 1 (2014). Therefore, no need to order amendment in addition to this publication.
| Committee |
TC 64
|
| DevelopmentNote |
Supersedes IEC 60364-4-482 (02/2002) Stability Date: 2018. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| HD 60364-4-42 : 2011 AMD 1 2015 | Identical |
| JIS C 60364-4-42:2006 | Identical |
| DIN VDE 0100-420:2022-06 | Identical |
| PN HD 60364-4-42 : 2011 AMD 1 2015 | Identical |
| PN-HD 60364-4-42 : 2011 | Identical |
| 19/30396444 DC | Identical |
| DIN VDE 0100-420 : 2016 COR 1 2018 | Identical |
| VDE 0100-420 : 2016 COR 1 2018 | Identical |
| I.S. HD 60364-7-753:2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-753: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - HEATING CABLES AND EMBEDDED HEATING SYSTEMS |
| CEI 32-10 : 2001 | GUIDANCE CONCERNING THE PERMISSIBLE TEMPERATURE RISE FOR PARTS OF ELECTRICAL EQUIPMENT, IN PARTICULAR FOR TERMINALS |
| 03/314480 DC : DRAFT SEP 2003 | EN 50065-4-7 - SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND FROM 1,6 MHZ TO 30 MHZ - PART 4-7: SAFETY OF PORTABLE FILTERS |
| IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
| S.R. HD 60364-5-557:2013 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS |
| IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV | Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control |
| I.S. HD 60364-5-559:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS (IEC 60364-5-55:2011 (MOD)) |
| BS EN 62040-1 : 2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| S.R. HD 60364-5-51:2009 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
| I.S. HD 60364-7-715:2005 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS (IEC 60364-7-715:2011 (MOD)) |
| S.R. HD 60364-7-715:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS |
| ISO/IEC 18010:2002 | Information technology Pathways and spaces for customer premises cabling |
| CSA C22.2 No. 61980-1 : 2016 | ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. HD 60364-7-705:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES (IEC 60364-7-705:2006 (MOD)) |
| BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
| 17/30356606 DC : 0 | BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS |
| 06/30158289 DC : 0 | BS EN 62040-1 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| 08/30195433 DC : 0 | BS EN 60519-1 - SAFETY IN ELECTROHEAT INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| 16/30350625 DC : 0 | BS EN 62485-5 ED 1.0 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 5: LITHIUM-ION BATTERIES FOR STATIONARY APPLICATIONS |
| 10/30217290 DC : DRAFT FEB 2010 | BS EN 60364-7-715 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS |
| HD 60364-5-51:2009/A12:2017 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES |
| EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| EN 60204-11:2000/corrigendum:2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| EN IEC 62485-2:2018 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| HD 384.7.711 : 200S1 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS |
| HD 60364-5-52:2011/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS |
| HD 60364-5-557:2013/A11:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS |
| HD 60364-5-559:2012/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS |
| PD IEC/TR 60943:2009 | Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals |
| 12/30268447 DC | BS EN 60364-7-753. Low-voltage electrical installations. Requirements for special installations or locations. Heating cables and embedded heating systems |
| S.R. HD 60364-6:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION |
| CEI EN 60598-2-24 : 2014 | LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES |
| CSA C22.3 No. 61936-1 : 2008 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| BS EN 60204-11 : 2001 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| I.S. EN IEC 62485-2:2018 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| BIS IS 16242-1 : 2014 AMD 1 2018 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| IEC 60364-5-55:2011+AMD1:2012+AMD2:2016 CSV | Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| IEC 61991:2000 | Railway applications - Rolling stock - Protective provisions against electrical hazards |
| IEC 60364-7-705:2006 | Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises |
| IEC 62485-2:2010 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| I.S. EN 62040-1:2008 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008 (EQV)) |
| PD IEC/TS 63053:2017 | General requirements for residual current operated protective devices for DC systems |
| BS EN 60519-2:2006 | Safety in electroheat installations Particular requirements for resistance heating equipment |
| 03/523674 DC : DRAFT APR 2003 | IEC 60364-1 ED. 5.0 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS |
| 17/30354643 DC : 0 | BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
| UNE-EN 15869-2:2011 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements |
| DIN EN 15869-2:2010-06 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| BIS IS/IEC 61058-1 : 2000(R2007) | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| VDI 2166 Blatt 2:2015-10 | Planning of electrical installations in buildings - Advice for electric mobility |
| BS EN 60598-2-24:2013 | Luminaires Particular requirements. Luminaires with limited surface temperatures |
| S.R. HD 60364-7-705:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
| BS IEC 60943:1998 | Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
| HD 60364-7-705:2007/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
| EN IEC 62933-2-1:2018 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| I.S. HD 60364-5-52:2011 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS |
| S.R. HD 60364-5-551:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS |
| I.S. HD 384.5.523:2002 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SECTION 523: CURRENT-CARRYING CAPACITIES IN WIRING SYSTEMS |
| I.S. EN IEC 62933-2-1:2018 | ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| I.S. EN 60598-2-24:2013 | LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES (IEC 60598-2-24:2013 (EQV)) |
| CSA C22.3 No. 61936-1 : 2008 : R2015 | POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| S.R. CLC/TS 61643-12:2009 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES |
| I.S. HD 384.7.711:2003 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-711: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXHIBITIONS, SHOWS AND STANDS |
| IEC 61643-12:2008 | Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles |
| IEC 60755:2017 | General safety requirements for residual current operated protective devices |
| IEC 60204-11:2000 | Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV |
| IEC 62933-2-1:2017 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| I.S. EN 60204-11:2000 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV |
| UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| 04/30112692 DC : DRAFT APR 2004 | IEC 60364 ED.1 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 6: VERIFICATION |
| IEC 60598-2-24:2013 | Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
| DD CLC/TS 61643-12:2009 | Low-voltage surge protective devices Surge protective devices connected to low-voltage power distribution systems. Selection and application principles |
| CEI EN 60519-1 : 2016 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| UNE-HD 60364-5-53:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear |
| UNI EN 15869-2 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| I.S. HD 384.6.61 S2:2003 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 6-61: VERIFICATION - INITIAL VERIFICATION |
| UNE-EN 60598-2-24:2013 | Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
| CSA ISO/IEC 18010 :2004 | INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
| I.S. HD 60364-5-51:2009 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD)) |
| S.R. HD 60364-5-559:2012 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-559: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - LUMINAIRES AND LIGHTING INSTALLATIONS |
| I.S. HD 60364-5-534:2008 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - ISOLATION, SWITCHING AND CONTROL - CLAUSE 534: DEVICES FOR PROTECTION AGAINST OVERVOLTAGES |
| S.R. HD 60364-5-52:2011 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS |
| IEC 62040-1:2017 EXV | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS |
| I.S. HD 60364-6:2007 | LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION |
| I.S. HD 60364-5-551:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS |
| IEC 60364-5-523:1999 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 523: Current-carrying capacities in wiring systems |
| IEC 60364-6-61:2001 | Electrical installations of buildings - Part 6-61: Verification - Initial verification |
| IEC 60364-7-715:2011 | Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations |
| BS EN 15869-2:2010 | Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Onshore unit, safety requirements |
| IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| IEC 61386-1:2008+AMD1:2017 CSV | Conduit systems for cable management - Part 1: General requirements |
| 13/30277685 DC : 0 | BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| 14/30302919 DC : 0 | PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS |
| IEC TS 63053:2017 | General requirements for residual current operated protective devices for DC system |
| 00/246907 DC : DRAFT DEC 2000 | BS EN 61980-1 - ELECTRICAL - ELECTRIC VEHICLE INDUCTIVE CHARGING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNE-HD 60364-6:2017 | Low-voltage electrical installations - Part 6: Verification |
| IEC TS 62933-5-1:2017 | Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification |
| UNE-HD 60364-5-51:2010 | Electrical installations of buildings -- Part 5-51: Selection and erection of electrical equipment - Common rules |
| BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
| UNE-HD 60364-7-753:2015 | Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems |
| IEC 60519-2:2006 | Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment |
| 16/30351274 DC : 0 | BS EN 62933-5-1 - ELECTRICAL ENERGY STORAGE (ESS) SYSTEMS - PART 5-1: SAFETY CONSIDERATIONS RELATED TO GRID INTEGRATED ELECTRICAL ENERGY STORAGE (EES) SYSTEMS |
| EN 60598-2-24:2013 | LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES (IEC 60598-2-24:2013) |
| EN 15869-2:2010 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements |
| 10/30234576 DC : DRAFT SEP 2010 | BS EN 60598-2-24 - LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES |
| IEC 60364-5-534:1997 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 534: Devices for protection against overvoltages |
| I.S. EN 15869-2:2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| NF EN 62040-1 : 2009 AMD 1 2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS |
| CSA ISO/IEC 18010 : 2004 : INC : AMD 1 : 2006 : R2012 | INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
| I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| S.R. HD 60364-5-53:2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| IEC 60364-5-51:2005 | Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
| IEC 60364-7-753:2014 | Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems |
| I.S. EN 60519-2:2006 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT |
| IEC TR 60943:1998+AMD1:2008 CSV | Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals |
| I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
| EN 62040-1:2008/A1:2013 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013) |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| 01/219359 DC : DRAFT JUNE 2001 | IEC 60364-6-61/A3 ED.1 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 6-61: VERIFICATION - INITIAL VERIFICATION |
| 11/30258071 DC : 0 | BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| HD 60364-5-53:2015/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| EN 60519-2:2006 | SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT |
| HD 60364-6:2016/AC:2017-11 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 6: VERIFICATION (IEC 60364-6:2016/COR1:2017) |
| HD 60364-7-715:2012/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| HD 384.5.523 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SECTION 523: CURRENT-CARRYING CAPACITIES IN WIRING SYSTEMS |
| HD 60364-5-551:2010/A11:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS |
| DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
| CLC/TS 61643-12:2009 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 12: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - SELECTION AND APPLICATION PRINCIPLES |
| HD 384.6.61 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - VERIFICATION - INITIAL VERIFICATION |
| HD 60364-7-753:2014/AC:2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-753: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - HEATING CABLES AND EMBEDDED HEATING SYSTEMS (IEC 60364-7-753:2014) |
| UNE-HD 60364-7-715:2013 | Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations |
| UNE-HD 60364-5-551:2013 | Low-voltage electrical installations -- Part 5-55: Selection and erection of electrical equipment - Other equipment -- Clause 551: Low-voltage generating sets |
| UNE-HD 60364-5-52:2014 | Low-voltage electrical installations -- Part 5-52: Selection and erection of electrical equipment - Wiring systems |
| IEC 61537:2006 | Cable management - Cable tray systems and cable ladder systems |
| IEC 62423:2009 | Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| IEC 60332-3-25:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D |
| IEC 60364-7-753:2014 | Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems |
| IEC 60702-1:2002+AMD1:2015 CSV | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables |
| IEC 60670-1:2015 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements |
| IEC 60695-4:2012 | Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60332-3-23:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B |
| IEC 60364-5-51:2005 | Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules |
| IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
| IEC 60050-442:1998 | International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories |
| IEC 61009-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules |
| IEC 60332-3-24:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
| IEC 61084-1:2017 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
| IEC 60332-3-21:2000 | Tests on electric cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| IEC 62020:1998+AMD1:2003 CSV | Electrical accessories - Residual current monitors for household and similar uses (RCMs) |
| IEC 60898-1:2015 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation |
| IEC 61386-1:2008+AMD1:2017 CSV | Conduit systems for cable management - Part 1: General requirements |
| IEC 60331-1:2009 | Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm |
| IEC 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| IEC 60598-2-24:2013 | Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
| IEC 60364-5-55:2011+AMD1:2012+AMD2:2016 CSV | Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| IEC 60332-3-22:2000+AMD1:2008 CSV | Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.