Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

26-03-2013

Publisher

International Electrotechnical Committee

£169.03

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

IEC 60243-1:2013 provides test methods for the determination of short-time electric strength of solid insulating materials at power frequencies between 48 Hz and 62 Hz. This standard does not cover the testing of liquids and gases, although these are specified and used as impregnates or surrounding media for the solid insulating materials being tested. NOTE: Methods for the determination of breakdown voltages along the surfaces of solid insulating materials are included.

Committee	TC 112
DevelopmentNote	Stability date: 2020. (03/2013)
DocumentType	Standard
Pages	53
PublisherName	International Electrotechnical Committee
Status	Current
Supersedes	IEC 60243:1967 IEC 60243-1:1998

Standards	Relationship
UNE-EN 60243-1:1999	Identical
JIS C 2110-1:2016	Identical
NEN EN IEC 60243-1 : 2013	Identical
PN EN 60243-1 : 2013	Identical
SAC GB/T 14081 : 1993	Identical
DIN EN 60243-1 : 2014	Identical
VDE 0303-21 : 2014	Identical
CEI EN 60243-1 : 2014	Identical
EN 60243-1:2013	Identical
NF EN 60243-1 : 2013	Identical
UNE-EN 60243-1:2013	Identical
I.S. EN 60243-1:2013	Identical
UNE 21316-1:1994	Identical
PNE-FprEN 60243-1	Identical
SAC GB/T 1408-1 : 1999	Identical
BS EN 60243-1:2013	Identical

I.S. EN ISO 9988-2:2015	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
IEEE 930 : 2004	GUIDE FOR THE STATISTICAL ANALYSIS OF ELECTRICAL INSULATION BREAKDOWN DATA
NF EN 60464-2 : 2002 AMD 1 2006	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
BS EN ISO 16396-2:2017	Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
CEI EN 60371-2 : 2005	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 2: METHODS OF TEST
BS EN 60243-2:2014	Electric strength of insulating materials. Test methods Additional requirements for tests using direct voltage
15/30259978 DC : 0	BS EN 62477-2 - SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 2: POWER ELECTRONIC CONVERTERS FROM 1000 V A.C. OR 1500 V D.C. UP TO 36 KV A.C. OR 54 KV D.C.
UNE-EN ISO 9988-2:2015	Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
PREN ISO 7792-2 : DRAFT 2011	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7792-2:2012	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
I.S. EN 60674-2:2017	SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
ISO 23559:2007	Plastics Film and sheeting Guidance on the testing of thermoplastic films
BS EN 60641-2:2004	Pressboard and presspaper for electrical purposes Methods of tests
06/30130313 DC : DRAFT MAR 2006	ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
16/30334902 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
UNE-EN 61400-24:2011	Wind turbines - Part 24: Lightning protection
BS ISO 6402-2 : 94 AMD 10652
I.S. EN ISO 16396-2:2017	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017)
17/30349217 DC : 0	BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 60672-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
I.S. EN 61251:2016	ELECTRICAL INSULATING MATERIALS AND SYSTEMS - A.C. VOLTAGE ENDURANCE EVALUATION
BIS IS 15382-1 : 2014	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS ISO 23559:2011	Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
11/30192003 DC : 0	BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 45510-2-7:2002	Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
UNE-EN ISO 19069-2:2016	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
BS EN 60819-2:2002	Non-cellulosic papers for electrical purposes Methods of test
15/30294124 DC : 0	BS EN 60674-2 ED 2.0 - SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
05/30091855 DC : DRAFT MAR 2005	ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 61241-0:2006	Electrical apparatus for use in the presence of combustible dust General requirements
DIN EN ISO 17855-2:2016-06	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
BS EN 60371-3-9:1996	Insulating materials based on mica Specifications for individual materials - Moulding micanite
BS 7933-2:2007	Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications
15/30315534 DC : 0	BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 60371-3-7:1996	Specification for insulating materials based on mica Specifications for individual materials - Polyester film mica paper with an epoxy resin binder for single conductor taping
03/318460 DC : DRAFT OCT 2003	IEC 61340-4-4 ED.1 - ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC SAFETY OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) - TEST METHOD AND REQUIREMENTS
NFC 33 009-2 : 2008	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
04/30115317 DC : 0	BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
BS EN 61061-3-2:2002	Non-impregnated densified laminated wood for electrical purposes. Specification for individual materials Rings produced from beech veneer
BS EN 60216-2:2005	Electrical insulating materials. Thermal endurance properties Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria
DD IEC/TS 62332-1:2011	Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components General requirements
NF EN 60554-2 : 2003	CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 60454-2 : 2008	PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 60544-2 : 2013	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST
UNE-EN ISO 17855-2:2016	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
BS EN 62271-200:2012	High-voltage switchgear and controlgear AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 60893-2:2003	Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
I.S. EN 50123-4:2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
I.S. EN 60641-2:2004	SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - METHODS OF TEST
BS EN 61340-4-4 : 2012	ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
I.S. EN 60243-3:2014	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 3: ADDITIONAL REQUIREMENTS FOR 1,2/50 [MU]S IMPULSE TESTS
ISO 20557-2:2018	Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
I.S. EN 62271-212:2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
I.S. EN 61241-1:2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
CEI EN 60079-32-2 : 2016	EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
HD 631.2 : 2007	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
PD CLC/TR 60079-32-1:2015	Explosive atmospheres Electrostatic hazards, guidance
NF EN 62329-2 : 2006	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
NF EN 60371-2 : 2005	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 2: METHODS OF TEST
EN 60455-3-8:2013	Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
BS EN 50123-7-2:2003	Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices
ISO 28078-2:2009	Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
NF EN 60216-2 : 2006	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
ASTM D 149 : 2009	Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D 6779 : 2017 : REDLINE	Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
CSA C22.2 No. 0.17 : 2000	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
ASTM D 5935 : 1996	Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)
EN 60819-2:2001	Non-cellulosic papers for electrical purposes - Part 2: Methods of test
DIN EN ISO 15103-2:2007-09	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 4613-2:2004-12	PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14598-3:2005-07	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN 14598-2:2005-07	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
IEC 62011-2:2004	Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
UNE-EN 62271-212:2017	High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
BS EN ISO 1622-2:1999	Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 11542-2 : 1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 13677-2:2003	Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements
16/30330036 DC : 0	BS EN 62788-2 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 2: POLYMERIC MATERIALS USED FOR FRONTSHEETS AND BACKSHEETS
BS EN 61241-18:2004	Electrical apparatus for use in the presence of combustible dust Protection by encapsulation \'mD\'
BS EN 60079-18 : 2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
ISO 15103-2:2007	Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
11/30253145 DC : 0	BS EN 62271-202 ED2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
ISO 19069-2:2016	Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN 62271-202:2014	High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
BS EN ISO 15252-2:2000	Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
BS EN 60893-2:2004	Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
BS EN ISO 2580-2:2003	Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Preparation of test specimens and determination of properties
DIN EN ISO 1872-2:2000-12	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 2580-2:2004	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM EN ISO 13000-2 : 2006	PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60371-3-4:1995/A1:2006	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: POLYESTER FILM-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
EN 60371-3-7:1995/A1:2006	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYESTER FILM MICA PAPER WITH AN EPOXY RESIN BINDER FOR SINGLE CONDUCTOR TAPING
EN 60626-2:2009	Combined flexible materials for electrical insulation - Part 2: Methods of test
EN 61241-1:2004/corrigendum Dec. 2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN 62011-2:2004	Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
EN 60684-2:2011	Flexible insulating sleeving - Part 2: Methods of test
EN 60216-2:2005	Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
EN 62271-201:2014	High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
EN 60505:2011/AC:2017-03	EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
EN 62271-212:2017	High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
EN 61730-2:2007/A1:2012	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011)
EN 60243-2:2014	Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
EN 62271-202:2014/AC:2014	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
EN 60079-32-2:2015	Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
EN 60298:1996/A11:1999	A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
EN 60454-2:2007	PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
EN 60371-3-6:1995/A1:2006	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: GLASS-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
DIN EN ISO 3672-2:2002-07	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60893-2:2004	Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
EN 61086-2:2004	Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
EN 61212-2:2006	Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
NBR IEC 60079-0 : 2013 ERRATA 2 2016	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS 2918-2:1994	Methods of test for electric strength of solid insulating materials Additional requirements for tests using direct voltage
BS EN 60454-2:2007	Pressure-sensitive adhesive tapes for electrical purposes Methods of test
ONORM EN ISO 11542-2 : 2009	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS IEC TS 60034-18.34 : 2000 AMD 16621	ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS
14/30304058 DC : 0	BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 60079-32-2:2015	Explosive atmospheres Electrostatics hazards. Tests
BIS IS 8504-2 : 2013	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
DD CLC/TS 60034-18-34:2004	Rotating electrical machines. Functional evaluation of insulation systems Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems
I.S. EN ISO 12086-2:2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD IEC/TS 62332-3:2016	Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Hermetic motor-compressors
07/30165210 DC : 0	BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
03/112421 DC : DRAFT NOV 2003	IEC 60034-18-41 TS ED.1 - ROTATING ELECTRICAL MACHINES - PART 18-41: EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS USED IN ROTATING ELECTRICAL MACHINES WHEN FED FROM VOLTAGE CONVERTERS
BS 7825-3.2:1997	Calibration of rubber and plastics test equipment. Calibration schedules Electrical properties
14/30267388 DC : 0	BS EN 62677-2 ED 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
BS EN 61241-1:2004	Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\'
NF EN 60371 3-6 : 1995 AMD 1 2007	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: GLASS-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
14/30310765 DC : 0	BS EN 61251 - ELECTRICAL INSULATING MATERIALS - A.C. VOLTAGE ENDURANCE EVALUATION
BS EN ISO 20028-2:2017	Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
02/204778 DC : DRAFT JULY 2002	IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
BS EN 60464-2:2001	Varnishes used for electrical insulation Methods of test
BS EN 50123-2:2003	Railway applications. Fixed installations. D.C. switchgear D.C. circuit breakers
14/30298039 DC : 0	BS EN 61069-7 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 7: ASSESSMENT OF SYSTEM SAFETY HAZARD
EN IEC 62677-2:2018	Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test
17/30365113 DC : 0	BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
BS ISO 17194:2007	Structural adhesives. A standard database of properties
DIN EN ISO 19069-2:2016-07	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
BS 5354-2:1994	Specification for laminated pressboard for electrical purposes Methods of test
BS ISO 2897-2 : 1994 AMD 10661	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 7391-2 : 1996 AMD 10746	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 60664-1 : 2008	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
07/30173659 DC : 0	BS EN 62271-200 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
CEI UNI EN 45510-2-7 : 2006	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
BS ISO 4894-2 : AMD 10662	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN IEC 60370:2018	Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods
BIP 2081 : 2012	A GUIDE TO EMERGENCY LIGHTING
S.R. CLC/TR 60079-32-1:2015	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
CEI EN 61061-3-2 : 2002	NON-IMPREGNATED DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: RINGS PRODUCED FROM BEECH VENEER
BS ISO 14910-2 : 1997 AMD 16024	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN 60684-2 : 2012	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
ISO 20558-2:2018	Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties
EN 50123-7-2:2003	Railway applications - Fixed installations - D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
BS ISO 28078-2:2009	Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 50123-1:2003	Railway applications. Fixed installations. D.C. switchgear General
ISO 20029-2:2017	Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
I.S. EN 60505:2011	EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
I.S. EN IEC 62677-2:2018	HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST
I.S. EN ISO 7391-2:2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN IEC 61340-4-4:2018	ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
I.S. EN 62271-202:2014	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
I.S. EN 60454-2:2007	PRESSURE-SENSITIVE ADHESIVE TAPES FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
DIN EN ISO 16396-2:2017-07	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
CEI EN 60763-2 : 2007	SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST
CEI EN 60455-3-8 : 2014	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
ONORM EN ISO 7391-2 : 2006	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 62271-201 : 2015	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
I.S. HD 631.2:2007	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
BIS IS/IEC 61400-24 : 2010	WIND TURBINES - PART 24: LIGHTNING PROTECTION
UNE-EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
UNE-EN ISO 20028-2:2017	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
I.S. EN 60763-2:2007	SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST
ISO 8606:1990	Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification
I.S. EN 50123-7-2:2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING CURRENT TRANSDUCERS AND OTHER CURRENT MEASURING DEVICES
IEC TS 62332-3:2016	Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 3: Hermetic motor-compressors
IEC TS 62332-1:2011	Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements
IEC 60079-18:2014 RLV	Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
IEC TS 60034-18-34:2000	Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
IEC 62899-201:2016	Printed electronics - Part 201: Materials - Substrates
DIN EN ISO 1874-2:2013-03	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
DIN EN ISO 10350-2:2011-06	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
DIN EN ISO 14530-2:2000-08	Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
15/30297998 DC : 0	BS EN 62271-212 ED 1.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 212: COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATION (CEADS)
BS EN ISO 4894-2:1999	Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 4613-2:1995	Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 15526-2:2004	Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
DIN EN ISO 2580-2:2004-05	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 1874-2:2012	Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN 62271-200:2012	High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN ISO 14528-2:2000	Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
IEC 60554-2:2001	Cellulosic papers for electrical purposes - Part 2: Methods of test
09/30206527 DC : 0	BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN ISO 1872-2:2007	Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 14598-2:2005	Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
IEC 60371-3-7:1995	Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
BIS IS/IEC 60079-0 : 2011	EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
I.S. EN ISO 15526-2:2004	PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 13000-2:2006	PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 7391-2:2006-06	PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 61212-2:2006	INSULATING MATERIALS - INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
I.S. EN 60893-2:2004	INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
NF EN ISO 11542-2 : 1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 14663-2:2006	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 15103-2:2007	PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISA 61241-18 : 2006	ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCAPSULATION "MD"
I.S. EN ISO 4894-2:1999	PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 3673-2:2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
I.S. EN ISO 11542-2:1999	PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 1873-2:2000-12	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
I.S. EN 14125:2013	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
DIN EN ISO 15526-2:2004-10	PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 1874-2:2012	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012)
ISA 61241-0 : 2006	ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
NF EN ISO 2580-2 : 2004	PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS 5227:1992	Specification for a.c. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
VDE 0349-1 : 1994	METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PLASTIC FILMS
BS 771:1992	Specification for phenolic moulding materials
BIS IS/IEC 60079-18 : 2009	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
DIN EN 60763-2 : 2007	SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST
VDE 0335-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST
DIN EN 61234-1 : 1994	METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PART 1: PLASTIC FILMS
BS 7933-1:2007	Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds
DIN EN 60672-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
12/30253935 DC : DRAFT JUNE 2012	BS EN 62271-201 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - AC SOLID-INSULATED ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
CEI EN 62329-2 : 2007	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
15/30327856 DC : 0	BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
BS EN ISO 25137-2:2017	Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
I.S. EN ISO 2897-2:2004	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD IEC 61956:2001	Methods of test for the evaluaion of water treeing in insulating materials
14/30304062 DC : 0	BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 60455-3-8:2013	Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories
13/30284122 DC : 0	BS EN 60243-2 - ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 2: ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE
14/30304003 DC : 0	BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
I.S. EN 61086-2:2004	COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
13/30284126 DC : 0	BS EN 60243-3 - ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 3: ADDITIONAL REQUIREMENTS FOR 1,2/50 [MU]S IMPULSE TESTS
11/30242905 DC : 0	BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN 61340-4-4 : 2012 AMD 1 2015	ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
BS EN ISO 17855-2:2016	Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 50123-7-1:2003	Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Measurement, control and protection devices for specific use in d.c. traction systems. Application guide
08/30176905 DC : DRAFT JAN 2008	BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
BS EN 60371-3-4:1996	Specification for insulating materials based on mica Specifications for individual materials - Polyester film-backed mica paper with a B-stage epoxy resin binder
13/30240167 DC : 0	BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
00/246816 DC : DRAFT NOV 2000	IEC 60317-2 ED.3 - INSULATING MATERIALS BASED ON MICA - PART 2: METHODS OF TEST
NF EN 60664-1 : 2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BS EN 60455-2:2015	Resin based reactive compounds used for electrical insulation Methods of test
08/30170332 DC : DRAFT JAN 2008	BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NFC 33 009-1 : 2008	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
15/30328314 DC : 0	BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES
15/30330425 DC : 0	BS EN 60370 ED 2.0 - TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS
BS ISO 3672-2 : 2000 AMD 13326	PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 10366-2 : 94 AMD 10665	PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30091878 DC : DRAFT FEB 2004	BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 62011-2 : 2005	INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 50123-1 : 2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 1: GENERAL
BS ISO 1163-2 : 1995 AMD 10744	PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
BS ISO 2580-2 : 94 AMD 10660	PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
08/30165044 DC : DRAFT FEB 2008	BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 60684-2:2011	Flexible insulating sleeving Methods of test
CEI EN 60554-2 : 2002	CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BIS IS/IEC 62271-200 : 2003	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UPTO AND INCLUDING 52 KV
04/30122412 DC : DRAFT SEP 2004	ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES
BS EN 61086-2:2004	Coatings for loaded printed wire boards (conformal coatings) Methods of test
I.S. EN 60554-2:2002	CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
03/321547 DC : DRAFT DEC 2003	IEC 60216-2 ED.4 - ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: GUIDE FOR THE DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
BS ISO 1622-2 : 1995 AMD 10649	PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
IEC 62539:2007	Guide for the statistical analysis of electrical insulation breakdown data
HD 631.1 : 200S2	ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
IEC 61730-1:2016	Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
IEC TR 61340-1:2012	Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
I.S. EN 60544-2:2012	ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV))
I.S. EN 61730-2:2007	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004 (MOD))
I.S. EN 60626-2:2009	COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN 60455-2:2015	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN ISO 17855-2:2016	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
I.S. EN 60079-14:2014	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
CEI EN 60079-18 : 2016	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
CEI EN 60819-2 : 2002	NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
I.S. EN 60079-32-2:2015	EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS
CEI EN 60243-2 : 2015	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 2: ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE
I.S. EN 62271-200:2012	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011 (EQV))
EN IEC 61340-4-4:2018	Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
CEI EN 61086-2 : 2005	COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
ASTM D 149 : 2009 : R2013	Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D 5857 : 2017 : REDLINE	Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
CEI EN 60626-2 : 2012	COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN 62271-200:2012/AC:2015	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 200: AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV (IEC 62271-200:2011)
EN ISO 7391-2:2006	Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
EN ISO 20029-2:2018	Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
IEC 61061-2:1992+AMD1:2001 CSV	Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test
I.S. EN 61340-4-4:2012	ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012 (EQV))
I.S. EN ISO 8986-2:2009	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 60464-2:2002	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
IEC 61241-0:2004	Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
I.S. EN 60371-3-7:1999	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 7: POLYESTER FILM MICA PAPER WITH AN EPOXY RESIN BINDER FOR SINGLE CONDUCTOR TAPING
IEC 61241-1-1:1999	Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
I.S. EN 60371-3-4:1998	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: POLYESTER FILM-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
IEC 61992-6:2006+AMD1:2014 CSV	Railway applications - Fixed installations - DC switchgear - Part 6:DC switchgear assemblies
ISO 17194:2007	Structural adhesives A standard database of properties
EN 61061-2:2001/corrigendum:2002	SPECIFICATION FOR NON-IMPREGNATED, DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
DIN EN ISO 6402-2:2004-05	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 2897-2:2004-05	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD IEC/TS 62788-2:2017	Measurement procedures for materials used in photovoltaic modules Polymeric materials. Frontsheets and backsheets
UNE-EN 62271-202:2015	High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
BS EN ISO 12086-2:2006	Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
IEC 62329-2:2006	Heat-shrinkable moulded shapes - Part 2: Methods of test
UNE-EN 60079-14:2016	Explosive atmospheres - Part 14: Electrical installations design, selection and erection
BS EN ISO 3673-2:2012	Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins
ISO 17855-2:2016	Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
IEC 60371-3-4:1992	Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder
ISO 1163-2:1995	Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 3673-2:2012-10	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
IEC 60763-2:2007	Specification for laminated pressboard - Part 2: Methods of test
IEC 60216-2:2005	Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
BS EN ISO 10350-2:2011	Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics
BS EN 60079-14:2014	Explosive atmospheres Electrical installations design, selection and erection
EN ISO 10350-2:2011	Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
UNI EN ISO 10350-2 : 2011	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
UNE-EN ISO 1874-2:2013	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
UNE-EN 60730-1:2013	Automatic electrical controls for household and similar use - Part 1: General requirements
EN ISO 14663-2:2006	Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
I.S. EN ISO 10350-2:2011	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN 60674-2:2017/AC:2018-01	SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST (IEC 60674-2:2016/COR1:2017)
EN ISO 9988-2:2015	Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006)
UNI EN ISO 1874-2 : 2013	PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 3673-2 : 2012	PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS
EN 50532:2010	Compact Equipment Assembly for Distribution Substations (CEADS)
UNI EN ISO 7792-2 : 2013	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 14125 : 2013	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
UNI EN ISO 14910-2 : 2013	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 8986-2 : 2010	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 50281-1-1 : 98 AMD 1 2002	ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING
UNI EN ISO 12086-2 : 2006	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 20029-2:2018	Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
I.S. EN ISO 10350-1:2017	PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
17/30352672 DC : 0	BS IEC 62788-5-1 ED 1.0 - MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - 5-1: EDGE SEALS - SUGGESTED TEST METHODS FOR USE WITH EDGE SEAL MATERIALS
I.S. EN ISO 6402-2:2004	PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE - (ETHYLENE-PROPYLENE-DIENE) - STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 60243-3 : 2015	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 3: ADDITIONAL REQUIREMENTS FOR 1,2/50 [MU]S IMPULSE TESTS
BS ISO 16365-2:2014	Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
BS EN 61061-2:2001	Non-impregnated densified laminated wood for electrical purposes Methods of test
BS ISO 7792-2 : 1997 AMD 15252	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 61400-24 : 2011	WIND TURBINES - PART 24: LIGHTNING PROTECTION
I.S. EN ISO 1873-2:2007	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 60684-2:2011	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
11/30231856 DC : 0	BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
PREN 14125 : DRAFT 2011	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
I.S. EN ISO 1872-2:2007	PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 50532:2010	COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
BS EN 62329-2:2006	Heat shrinkable moulded shapes Methods of test
I.S. EN 50123-3:2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
05/30128281 DC : DRAFT JAN 2005	ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 9988-2 : 2006	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEI EN 60641-2 : 2005	PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
DIN EN ISO 9988-2:2015-05	PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006)
01/203394 DC : DRAFT MAY 2001	IEC 60641-2 - PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
07/30175250 DC : DRAFT DEC 2007	BS EN 60626-2 ED.3 - COMBINED FLEXIBLE MATERIALS FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
BS EN 60505:2011	Evaluation and qualification of electrical insulation systems
BS EN 50281-1-1:1999	Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing
BS ISO 14663-2 : 1999 AMD 16029	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
01/704739 DC : DRAFT FEB 2001	PREN 14125 - UNDERGROUND PIPEWORK FOR PETROL FILLING STATIONS
17/30354769 DC : 0	BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD IEC/TS 62332-2:2014	Electrical insulation systems (EIS). Thermal evaluation of combined liquid and solid components Simplified test
00/201882 DC : DRAFT APR 2000	BS EN 60298 - A.C. METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
PD IEC TR 61278:1997	Live working. Guidelines for dielectric testing of tools and equipment
03/118818 DC : DRAFT DEC 2003	BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 19069-2:2016	Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 60371-2:2004	Specification for insulating materials based on mica Methods of test
NF EN 60243-3 : 2014	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 3: ADDITIONAL REQUIREMENTS FOR 1,2/50 MICRO SECOND IMPULSE TESTS
NF EN 60763-2 : 2016	SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST
NF ISO 8605 : 2002	PLASTIQUES RENFORCES AU VERRE TEXTILE - MATS PREIMPREGNES SMC - BASE DE SPECIFICATION
BS EN 60371-3-6:1996	Specification for insulating materials based on mica Specifications for individual materials - Gloss-backed mica paper with a B-stage epoxy resin binder
BS EN 60626-2:2009	Combined flexible materials for electrical insulation Methods of test
NF EN 60243-2 : 2014	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 2: ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE
UNI CEI EN 45510-2-7 : 2011	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
I.S. EN 61234-1:1995	METHOD OF TEST FOR THE HYDROLYTIC STABILITY OF ELECTRICAL INSULATING MATERIALS - PART 1: PLASTIC FILMS
15/30304408 DC : 0	BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 12086-2 : 2001 AMD 10637	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
BS EN IEC 60370:2018	Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes. Electric breakdown methods
CLC/TS 60034-18-34:2004	Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
I.S. EN 50123-1:2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - GENERAL
EN IEC 61730-1:2018/AC:2018-06	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
I.S. EN 61189-2:2006	TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES
BS PD IEC TS 60079-32-1 : 2013	EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
CSA C22.2 No. 60079-18 : 2016	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
ISA 61241-1 : 2006	ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD"
UNE-EN ISO 16396-2:2017	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
I.S. EN ISO 14910-2:2013	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
I.S. EN ISO 25137-2:2017	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
BS IEC 62899-201 : 2016	PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
CSA C22.2 No. 0.17 : 2000 : R2013	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
I.S. EN ISO 20029-2:2018	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
I.S. EN 61400-24:2010	WIND TURBINES - PART 24: LIGHTNING PROTECTION
I.S. EN IEC 61730-1:2018	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
ISO 14910-2:2013	Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 20028-2:2015-08 (Draft)	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
BS EN 60674-2:2017+A1:2019	Specification for plastic films for electrical purposes Methods of test
I.S. EN 50123-2:2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - D.C. CIRCUIT BREAKERS
CEI EN 60505 : 2012	EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS
CEI EN 60216-2 : 2006	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
IEC TS 61956:1999	Methods of test for the evaluation of water treeing in insulating materials
I.S. EN 60371-2:2005	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 2: METHODS OF TEST
ISO 16365-2:2014	Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties
I.S. EN 60730-1:2016	AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61241-0:2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
I.S. EN 50123-7-3:2003	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING VOLTAGE TRANSDUCERS AND OTHER VOLTAGE MEASURING DEVICES
I.S. EN 60371-3-6:1998	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 6: GLASS-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
NF EN ISO 10366-2 : 2004	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 60664-1:2007	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
IEC 62677-2:2017	Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test
UNE-EN ISO 14910-2:2014	Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
UNE-EN ISO 7792-2:2013	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
DIN EN ISO 11542-2:2010-01	Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
BS EN 62271-212:2017	High-voltage switchgear and controlgear Compact Equipment Assembly for Distribution Substation (CEADS)
02/124520 DC : DRAFT DEC 2002	EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS
BS EN ISO 14529-2:2000	Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
IEC 61251:2015	Electrical insulating materials and systems - AC voltage endurance evaluation
IEC 60371-3-6:1992	Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder
ISO 1873-2:2007	Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 2897-2:2003	Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007	Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 60730-1:2011	Automatic electrical controls for household and similar use General requirements
IEC 61241-1:2004	Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
IEC 60371-3-9:1995	Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
BS EN ISO 13000-2:2005	Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination of properties
BS EN 12576:1998	Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
ISO 14528-2:1999	Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
IEC 60079-0:2017 RLV	Explosive atmospheres - Part 0: Equipment - General requirements
ISO 20028-2:2017	Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN 13677-3:2003	Reinforced thermoplastic moulding compounds. Specification for GMT Specific requirements
BS EN ISO 3672-2:2001	Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
BS EN 1834-1:2000	Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres
UNE-EN 61730-2:2007	Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing
BS EN 50532:2010	Compact equipment assembly for distribution substations (CEADS)
UNE-EN 60079-0:2013	Explosive atmospheres - Part 0: Equipment - General requirements
ISO 1874-2:2012	Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN 62271-201:2015	High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 60505:2011	Evaluation and qualification of electrical insulation systems
IEC 60544-2:2012	Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
IEC 60464-2:2001+AMD1:2006 CSV	Varnishes used for electrical insulation - Part 2: Methods of test
ISO 2580-2:2003	Plastics Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 10366-2:2003	Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Preparation of test specimens and determination of properties
IEC 60455-2:2015	Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
ISO 14530-2:1999	Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
IEC 60819-2:2001	Non-cellulosic papers for electrical purposes - Part 2: Methods of test
IEC 61061-3-2:2001	Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Rings produced from beech veneer
IEC 61212-2:2006	Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60454-2:2007	Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
IEC 61330:1995	High-voltage/low voltage prefabricated substations
ISO 4894-2:1995	Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14529-2:1999	Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties
UNE-EN 14125:2013	Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
IEC 60684-2:2011	Flexible insulating sleeving - Part 2: Methods of test
IEC TS 62788-2:2017	Measurement procedures for materials used in photovoltaic modules - Part 2: Polymeric materials - Frontsheets and backsheets
UNE-EN ISO 10350-2:2011	Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
IEC 60371-2:2004	Specification for insulating materials based on mica - Part 2: Methods of test
ISO 12086-2:2006	Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3672-2:2000	Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14527-2:2000	Preparation of test specimens and determination of properties
IEC 61234-1:1994	Method of test for the hydrolytic stability of electrical insulating materials - Part 1: Plastic films
IEC 62271-212:2016	High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS)
ISO 7792-2:2012	Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 60243-3:2013	Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests
IEC 61086-2:2004	Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
ISO 16396-2:2017	Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 10350:1993	Plastics Acquisition and presentation of comparable single-point data
BS EN 14598-3:2005	Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
ISO 1622-2:1995	Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 6402-2:2003	Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 62271-202:2014	High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation
09/30202403 DC : 0	BS EN 50532 - COMPACT EQUIPMENT ASSEMBLY FOR DISTRIBUTION SUBSTATIONS (CEADS)
IEC 60455-3-8:2013	Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
ISO 13000-2:2005	Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
11/30233799 DC : 0	BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
ISO 11542-2:1998	Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 60672-2:1999	Ceramic and glass insulating materials - Part 2: Methods of test
ISO 25137-2:2009	Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 14125:2013	Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
IEC 60243-2:2013	Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage
ISO 14526-2:1999	Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 10366-2:2003	Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN 50532:2011	Compact Equipment Assembly for Distribution Substations (CEADS)
ISO 8986-2:2009	Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
ISO 9988-2:2006	Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 9054:1999	Cellular plastics, rigid. Test methods for self-skinned high-density materials
IEC 61241-18:2004	Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD'
IEC 60626-2:2009	Combined flexible materials for electrical insulation - Part 2: Methods of test
ISO 3673-2:2012	Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
13/30271432 DC : 0	BS EN 60079-18 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN ISO 6402-2:2003	Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14663-2:2006	Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS 7822-1:1995	Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS EN ISO 2897-2:2003	Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14526-2:2000	Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
EN 61241-18:2004	Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation "mD"
EN 1834-1:2000	Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
EN ISO 1163-2:1999	Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
EN ISO 15252-2:1999	Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999)
EN ISO 10366-2:2003	Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)
EN ISO 8986-2:2009	Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 19069-2:2016	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
EN 13677-3:2003	Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements
EN ISO 1873-2:2007	Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
EN 13677-2:2003	Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements
EN ISO 1874-2:2012	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
EN ISO 14529-2:1999	Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999)
EN ISO 15526-2:2004	Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)
EN ISO 10350-1:2017	Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
EN ISO 3672-2:2001	Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000)
EN ISO 2580-2:2003	Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
EN ISO 16396-2:2017	Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017)
EN ISO 14530-2:1999	Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999)
EN 14125:2013	Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
EN ISO 20028-2:2017	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
EN ISO 17855-2:2016	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 1622-2:1999	Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)
EN ISO 4894-2:1999	Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
EN ISO 14528-2:1999	Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999)
EN ISO 1872-2:2007	Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
EN 45510-2-7:2002	Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
EN ISO 15103-2:2007	Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007)
EN ISO 3673-2:2012	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
EN ISO 14526-2:1999	Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999)
EN ISO 14910-2:2013	Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
EN 14598-3:2005	Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN ISO 7792-2:2012	Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
EN ISO 6402-2:2003	Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003)
EN ISO 14527-2:1999	Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999)
EN ISO 2897-2:2003	Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003)
EN ISO 25137-2:2017	Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
EN 50123-7-3:2003	Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices
10/30216936 DC : 0	BS EN 61340-4-4 - ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC)
I.S. EN 60079-0:2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
04/30123435 DC : DRAFT OCT 2004	IEC 62039 TR ED.1 - POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HV STRESS
I.S. EN 62011-2:2004	INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES, - PART 2: METHODS OF TEST
02/205209 DC : DRAFT JULY 2002	IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD'
CEI EN 60893-2 : 2005	INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CEI EN 60684-2 : 2012	FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
BS EN 60544-2:2012	Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test
BS EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
BS ISO 25137-2 : 2009	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 62011-2:2004	Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Methods of test
96/201186 DC : DRAFT FEB 1996	IEC 60684-3-214 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED, SHRINK RATIO 3:1
BS EN 60298:1996	A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
I.S. EN 60243-2:2014	ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 2: ADDITIONAL REQUIREMENTS FOR TESTS USING DIRECT VOLTAGE
BS EN 50123-7-3:2003	Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices
00/243930 DC : DRAFT AUG 2000	IEC 60079-18. ED. 2. ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 18: ENCAPSULATION 'M'
BS EN 60243-3:2014	Electric strength of insulating materials. Test methods Additional requirements for 1,2/50 μs impulse tests
BS EN 61730-2 : 2007	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
BS EN 62271-201:2014	High-voltage switchgear and controlgear AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
NF EN 60371 3-4 : 1995 AMD 1 2007	SPECIFICATION FOR INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: POLYESTER FILM-BACKED MICA PAPER WITH A B-STAGE EPOXY RESIN BINDER
NF EN 60672-2 : 2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
NF EN 60641-2 : 2005	PRESSBOARD AND PRESS PAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TESTS
I.S. EN ISO 19069-2:2016	PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
07/30152076 DC : 0	BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN 61251:2016	Electrical insulating materials and systems. A.C. voltage endurance evaluation
BS EN 60763-2:2007	Specification for laminated pressboard Methods of test
BS ISO 1268-8:2004	Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC
BS EN 60672-2:2000	Ceramic and glass insulating materials Methods of test
BS EN 60554-2:2002	Cellulosic papers for electrical purposes Methods of test
15/30304402 DC : 0	BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
PD IEC/TR 62039:2007	Selection guide for polymeric materials for outdoor use under HV stress
CEI EN 61061-2 : 2002	SPECIFICATION FOR NON-IMPREGNATED, DENSIFIED LAMINATED WOOD FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
CSA C22.2 No. 0.17 : 2000 : R2004	EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
09/30194359 DC : 0	BS EN 60034-18-34 - ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS
04/30091870 DC : DRAFT FEB 2004	BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
09/30190333 DC : 0	BS EN 61400-24 - WIND TURBINES - PART 24: LIGHTNING PROTECTION
IEC TS 62332-2:2014	Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 2: Simplified test
I.S. EN IEC 60370:2018	TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS
I.S. EN 62329-2:2006	HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
BS EN ISO 9988-2:2015	Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 61400-24:2010	Wind turbines Lightning protection
I.S. EN 60455-3-8:2013	RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV))
I.S. EN ISO 20028-2:2017	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
I.S. EN 60371-3-9:1999	INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: MOULDING MICANITE
IEC 60674-2:2016	Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 61340-4-4:2018	Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
I.S. EN 60672-2:2000	CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST
NF EN 60819-2 : 2002	NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
EN 60079-18:2015/A1:2017	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
I.S. EN 60216-2:2005	ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 2: DETERMINATION OF THERMAL ENDURANCE PROPERTIES OF ELECTRICAL INSULATING MATERIALS - CHOICE OF TEST CRITERIA
NF EN 60371 3-7 : 1996 AMD 1 2007	INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATION OF INDIVIDUAL MATERIALS - SHEET 7: POLYESTER FILM MICA PAPER WITH AN EPOXY RESIN BINDER FOR SINGLE CONDUCTOR TAPING
BS EN 60079-0 : 2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
I.S. EN 60079-18:2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN ISO 10350-1:2017	Plastics. Acquisition and presentation of comparable single-point data Moulding materials
EN ISO 13000-2:2005	Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
IEC 60079-0:2017	Explosive atmospheres - Part 0: Equipment - General requirements
CLC/TR 60079-32-1:2015	Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
ISO 7391-2:2006	Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 25137-2:2016-08 (Draft)	PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
IEC TR 62039:2007	Selection guide for polymeric materials for outdoor use under HV stress
IEC 60370:2017	Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods
I.S. EN 62271-201:2014	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 201: AC SOLID-INSULATION ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
EN 61340-4-4:2012/A1:2015	ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012)
DIN EN ISO 7792-2:2013-03	PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
DIN EN ISO 10366-2:2004-05	PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14125:2013-09	THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
BS EN ISO 8986-2:2009	Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties
IEC 60641-2:2004	Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
BS EN ISO 15103-2:2007	Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN 60079-32-2:2016	Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
BS EN ISO 14910-2:2013	Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
ISO 15252-2:1999	Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
12/30269297 DC : 0	BS EN 60079-14/ED 5 - EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
UNE-EN ISO 3673-2:2013	Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
BS EN ISO 1163-2:2000	Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 1872-2:2007	Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
IEC 61400-24:2010	Wind turbines - Part 24: Lightning protection
IEC 62271-201:2014	High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
ISO 14663-2:1999	Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
02/714212 DC : DRAFT DEC 2002	IEC 62271-202 ED.1 - HIGH VOLTAGE/LOW VOLTAGE PREFABRICATED SUBSTATIONS
ISO 14527-2:1999	Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006	Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2012	Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 15526-2:2000	Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
02/124519 DC : DRAFT DEC 2002	EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
IEC 62271-200:2011	High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
BS EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures
BS EN 61212-2:2006	Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes Methods of test
BS EN ISO 14530-2:2000	Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 61251:2016	Electrical insulating materials and systems - A.C. voltage endurance evaluation
NF EN ISO 2897-2 : 2004	PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 61234-1:1994	Method of test for the hydrolitic stability of electrical insulating materials - Part 1: Plastic films
EN 60763-2:2007	Specification for laminated pressboard - Part 2: Methods of test
EN 50123-1:2003	Railway applications - Fixed installations - D.C. switchgear - Part 1: General
DIN EN ISO 14663-2:2006-06	PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 61330:1996	High-voltage/low-voltage prefabricated substations
EN 50123-7-1:2003	Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
EN 50123-4:2003/A1:2013	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
DIN EN ISO 12086-2:2006-05	PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 13000-2:2006-02	Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005)
EN 62329-2:2006	Heat shrinkable moulded shapes - Part 2: Methods of test
DIN EN ISO 14910-2:2013-06	PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
EN 50123-2:2003	Railway applications - Fixed installations - D.C. switchgear - Part 2: D.C. circuit breakers
EN 60464-2:2001/A1:2006	VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN 60243-3:2014	Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests
EN 60672-2:2000	Ceramic and glass insulating materials - Part 2: Methods of test
EN 61400-24:2010	Wind turbines - Part 24: Lightning protection
EN 60371-2:2004	Specification for insulating materials based on mica - Part 2: Methods of test
EN 60544-2:2012	Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
IEC 61340-4-4:2018 RLV	Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
EN 60371-3-9 : 1995 AMD 1 2007	INSULATING MATERIALS BASED ON MICA - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 9: MOULDING MICANITE
EN 61061-3-2:2001	Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Rings produced from beech veneer
EN 60554-2:2002	Cellulosic papers for electrical purposes - Part 2: Methods of test
DIN EN ISO 8986-2:2010-04	PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN VDE 0110-1 : 1997	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
EN 60641-2:2004	Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
EN 60455-2:2015	Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
EN 61241-0:2006	Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
EN 50123-3:2003/A1:2013	RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
CAN/CSA-C22.2 NO. 60335-2-34:17	Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34)
CSA C22.2 No. 60079.0 : 2015	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
NBR IEC/TR 62039 : 2010	SELECTION GUIDE FOR POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HIGH VOLTAGE STRESS
CSA IEC 61400-24 : 2012 : R2017	WIND TURBINES - PART 24: LIGHTNING PROTECTION
CSA IEC 61400-24:2012	WIND TURBINES - PART 24: LIGHTNING PROTECTION
BS 7008-1(1994) : AMD 8821	ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA

IEC 60212:2010	Standard conditions for use prior to and during the testing of solid electrical insulating materials
IEC 60684-2:2011	Flexible insulating sleeving - Part 2: Methods of test
ISO 293:2004	Plastics — Compression moulding of test specimens of thermoplastic materials
IEC 60455-2:2015	Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
ISO 294-3:2002	Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
IEEE 930 : 2004	GUIDE FOR THE STATISTICAL ANALYSIS OF ELECTRICAL INSULATION BREAKDOWN DATA
ISO 295:2004	Plastics — Compression moulding of test specimens of thermosetting materials
IEC 61099:2010	Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
IEC 60836:2015	Specifications for unused silicone insulating liquids for electrotechnical purposes
IEC 60296:2012 RLV	Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
ISO 294-1:2017	Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
IEC 60674-2:2016	Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 62539:2007	Guide for the statistical analysis of electrical insulation breakdown data
IEC 60464-2:2001+AMD1:2006 CSV	Varnishes used for electrical insulation - Part 2: Methods of test

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

IEC 60243-1:2013

Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies

Abstract

General Product Information

International Equivalents

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory