IEC 60093:1980
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
04-12-2015
Superseded by
Language(s)
English - French
Published date
01-01-1980
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Contents
Foreword
Preface
Clause
1. Scope
2. Definitions
3. Significance
4. Power supply
5. Measuring methods and accuracy
6. Test specimens
7. Electrode material
8. Specimen handling and mounting
9. Conditioning
10. Test procedure
11. Calculation
12. Report
Appendix A - Examples of measuring methods and their
accuracy
Appendix B - Formulae for calculating A and p
Figures
Gives test procedures and calculations for the determination of volume and surface resistivity. Establishes recommendations for: values of voltage and time of application; nature and geometry of electrodes temperature and humidity of atmosphere and test specimens; conditioning of test specimens.
| Committee |
TC 112
|
| DevelopmentNote |
Also numbered as BS 6233(1982) (09/2005) Stability Date: 2015. (11/2012)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| CEI 15-23 : 1997 | Identical |
| NFT 51 731 : 80 FD | Similar to |
| NEN 10093 : 1986 | Identical |
| VDE 0303-30 : 1993 | Identical |
| UNE 21303:1983 | Identical |
| HD 429 : 200S1 | Identical |
| NFC 26 215 : 1982 | Identical |
| DIN IEC 60093 : 1993 | Identical |
| I.S. EN ISO 9988-2:2015 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
| NF EN 60464-2 : 2002 AMD 1 2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| BS EN ISO 16396-2:2017 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| PREN ISO 7792-2 : DRAFT 2011 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 7792-2:2012 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
| 14/30304058 DC : 0 | BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN ISO 15015 : 2011 | PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
| 00/243942 DC : 0 | PREN 50359-1-2 - ADVANCED TECHNICAL CERAMICS - PART 1-2: ELECTRICAL PROPERTIES - DETERMINATION OF THE SURFACE AND VOLUME RESISTIVITY IN THE TEMPERATURE RANGE 20 DEGREE C TO 800 DEGREE C |
| 06/30130313 DC : DRAFT MAR 2006 | ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS |
| 10/30211370 DC : DRAFT JUNE 2010 | BS ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| 16/30334902 DC : 0 | BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
| BS 5664-2.1(1979) : 1979 | SOLVENTLESS POLYMERISABLE RESINOUS COMPOUNDS USED FOR ELECTRICAL INSULATION - METHODS OF TEST |
| 06/30155368 DC : 0 | PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| CEI EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
| UNE-EN ISO 19069-2:2016 | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
| 15/30294124 DC : 0 | BS EN 60674-2 ED 2.0 - SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| DIN EN ISO 17855-2:2016-06 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| 15/30315534 DC : 0 | BS EN ISO 16396-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 5737:1979 | Method for the measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids |
| DIN EN ISO/IEC 80079-34:2012-03 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE (ISO/IEC 80079-34:2011) |
| NFC 33 009-2 : 2008 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| 04/30115317 DC : 0 | BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS |
| BS 5629-2:1979 | Insulating varnishes containing solvent Test methods |
| CEI EN 61537 : 2007 | CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS |
| CEI EN 60544-2 : 2013 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST |
| UNE-EN ISO 17855-2:2016 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
| CEI EN 60034-18-34 : 2013 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
| I.S. EN ISO 7391-2:2006 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 62333-3:2010 | NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET |
| I.S. EN 61241-1:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| CEI EN 60079-32-2 : 2016 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| I.S. HD 631.2:2007 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| HD 631.2 : 2007 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| NF EN 62329-2 : 2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| CSA C22.2 No. 0.17 : 2000 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| I.S. EN 62329-2:2006 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| ASTM D 5935 : 1996 | Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998) |
| I.S. EN 61189-2:2006 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES |
| I.S. EN ISO 11963:2012 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| I.S. EN ISO 11833-1:2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| DIN EN ISO 4613-2:2004-12 | PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 14598-3:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| DIN EN 14598-2:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
| DIN EN 13415:2010-05 | TEST OF ADHESIVE FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| BS EN ISO 4613-2:1995 | Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN ISO 1622-2:1999 | Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 11542-2 : 1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 13677-2:2003 | Reinforced thermoplastic moulding compounds. Specification for GMT Methods of test and general requirements |
| ISO 15103-2:2007 | Plastics Poly(phenylene ether) (PPE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 19069-2:2016 | Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 14530-2:2000 | Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 15252-2:2000 | Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 2580-2:2003 | Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 7391-2:2006 | Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| DIN EN ISO 1872-2:2000-12 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 2580-2:2004 | PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 12281:2002 | Printing and business paper - Requirements for copy paper for dry toner imaging processes |
| EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN 61241-1:2004/corrigendum Dec. 2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
| EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| DIN EN ISO 3672-2:2002-07 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 61340-4-5:2004 | Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| DIN 2875:2002-06 | FLANGED STEEL PIPES AND FITTINGS WITH HARD OR SOFT RUBBER LININGS - TECHNICAL DELIVERY CONDITIONS |
| DEFSTAN 93-63/1(1992) : 1992 | METHOD FOR SPECIFYING POLYAMIDE (PA) HOMOPOLYMERS FOR MOULDING & EXTRUSION |
| ONORM EN ISO 11542-2 : 2009 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 62333-3:2010 | Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet |
| CEI EN 61340-4-8 : 2016 | ELECTROSTATICS - PART 4-8: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC DISCHARGE SHIELDING - BAGS |
| I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 62631-1:2011 | Dielectric and resistive properties of solid insulating materials General |
| 07/30165210 DC : 0 | BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| BS 7825-3.2:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Electrical properties |
| 14/30267388 DC : 0 | BS EN 62677-2 ED 1.0 - HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 2: METHODS OF TEST |
| BS EN 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\' |
| BS EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories |
| CEI EN 62631-1 : 2012 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| 17/30349217 DC : 0 | BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNE-EN ISO 9988-2:2015 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
| 09/30200088 DC : 0 | BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| 05/30091855 DC : DRAFT MAR 2005 | ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 50395 : 2005 | ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
| DIN EN 14879-6:2010-04 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| 02/204778 DC : DRAFT JULY 2002 | IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| NF EN 14879-6 : 2010 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| 17/30365113 DC : 0 | BS EN 60455-3-8 ED.2.0 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| BS ISO 17194:2007 | Structural adhesives. A standard database of properties |
| BS EN 60034-18-34:2012 | Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems |
| DIN EN ISO 19069-2:2016-07 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
| BS ISO 2897-2 : 1994 AMD 10661 | PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 61537:2007 | Cable management. Cable tray systems and cable ladder systems |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| BS ISO 4894-2 : AMD 10662 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 07/30161672 DC : 0 | BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
| BS ISO 14910-2 : 1997 AMD 16024 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| NF EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| ISO 20558-2:2018 | Plastics — Poly(phenylene sulfide) (PPS) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
| S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| ISO 20029-2:2017 | Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
| I.S. EN ISO/IEC 80079-34:2011 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| I.S. EN 60544-4:2003 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
| DIN EN ISO 16396-2:2017-07 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| ONORM EN ISO 7391-2 : 2006 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| CEI EN 60455-3-8 : 2014 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| UNI EN ISO 11833-1 : 2012 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| UNE-EN ISO 25137-2:2017 | Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009) |
| UNE-EN ISO 20028-2:2017 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
| ASTM D 5857 : 2017 : REDLINE | Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
| CSA C22.2 No. 0.17 : 2000 : R2013 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ASTM D 5575 : 2007 : R2013 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| CEI EN 50290-2-30 : 2002 | COMMUNICATION CABLES - PART 2-30: COMMON DESIGN RULES AND CONSTRUCTION POLY(TETRAFLUOROETHYLENE-HEXAFLUOROPROPYLENE) (FEP) INSULATION AND SHEATHING |
| I.S. EN 60286-6:2004 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS |
| ISO 8606:1990 | Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Basis for a specification |
| I.S. EN 61340-4-5:2004 | ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERIZING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| DIN EN ISO 1874-2:2013-03 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| DIN EN ISO 10350-2:2011-06 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| DIN EN ISO 15103-2:2007-09 | PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 14530-2:2000-08 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999 |
| DIN EN ISO 2580-2:2004-05 | PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 15526-2:2004 | Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 1874-2:2012 | Plastics. Polyamide (PA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 14528-2:2000 | Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties |
| BS EN ISO 1872-2:2007 | Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 14598-2:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
| I.S. EN ISO 15526-2:2004 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 7391-2:2006-06 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 11833-1:2012-11 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM (ISO 11833-1:2012) |
| NF EN ISO 11542-2 : 1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 14663-2:2006 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN 34811:1999-09 | CROSS- RECESSED FLAT HEAD PLASTIC SCREWS |
| I.S. EN ISO 15103-2:2007 | PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN 34814:1999-09 | PLASTIC HEXAGON NUTS |
| EN ISO 11963:2012 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| I.S. EN ISO 2898-2:2008 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN 34812:1999-09 | CROSS- RECESSED PAN HEAD PLASTIC SCREWS |
| I.S. EN ISO 4894-2:1999 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 1873-2:2000-12 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN 34813:1999-09 | CROSS- RECESSED CHEESE HEAD PLASTIC SCREWS |
| I.S. EN ISO 3673-2:2012 | PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012) |
| I.S. EN ISO 11542-2:1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 11963:2013-03 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| I.S. EN 14125:2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| DIN EN ISO 15526-2:2004-10 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 1874-2:2012 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 1874-2:2012) |
| I.S. EN ISO 10366-2:2004 | PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| DIN 28055-2:1991-02 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
| NF EN ISO 2580-2 : 2004 | PLASTICS - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 903-0:2003 | Physical testing of rubber General |
| BS 3412:1992 | Methods of specifying general purpose polyethylene materials for moulding and extrusion |
| BS 4936:1987 | Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials |
| BS 1493:1987 | Method of specifying general purpose polystyrene (PS) moulding and extrusion materials |
| VDI 2083 Blatt 9.2:2017-01 | Cleanroom technology - Consumables in the cleanroom |
| VDE 0335-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST |
| BS 7933-1:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds |
| VDE 0303-31 : 1993 | METHODS OF TEST FOR INSULATING MATERIALS FOR ELECTRICAL PURPOSES; INSULATION RESISTANCE OF SOLID MATERIALS |
| BS 903-C1:1991 | Physical testing of rubber Determination of surface resistivity |
| DIN EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| CEI EN 62329-2 : 2007 | HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST |
| 14/30312008 DC : 0 | BS EN 61340-2-3 ED. 2 - ELECTROSTATICS - PART 2-3: METHODS OF TEST FOR DETERMINING THE RESISTANCE AND RESISTIVITY OF SOLID MATERIALS USED TO AVOID ELECTROSTATIC CHARGE ACCUMULATION |
| 15/30327856 DC : 0 | BS ISO 20558-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
| BS EN ISO 25137-2:2017 | Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| I.S. EN ISO 2897-2:2004 | PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 11/30231856 DC : 0 | BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| 14/30304062 DC : 0 | BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 11/30236286 DC : 0 | BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| BS ISO 23559:2011 | Plastics. Film and sheeting. Guidance on the testing of thermoplastic films |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| NF EN ISO 9988-2 : 2015 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 11/30242905 DC : 0 | BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 17855-2:2016 | Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 61340-4-8:2015 | Electrostatics Standard test methods for specific applications. Electrostatic discharge shielding. Bags |
| 08/30176905 DC : DRAFT JAN 2008 | BS EN 60684-2 - FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| 13/30240167 DC : 0 | BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 20028-2:2017 | Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS ISO 25137-2 : 2009 | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS CECC00015-1(1991) : AMD 7443 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: BASIC SPECIFICATION: PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES - GENERAL REQUIREMENTS |
| BS EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers |
| BS EN ISO 15015:2011 | Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| NFC 33 009-1 : 2008 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| NFC 32 102-2 : 1999 AMD 1 2003 | RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 2: TEST METHODS |
| 15/30328314 DC : 0 | BS EN ISO 20557-2 - PLASTICS - POLY(PHENYLENE ETHER) (PPE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES |
| BS EN 60286-6:2004 | Packaging of components for automatic handling Bulk case packaging for surface mounting components |
| BS EN 50281-1-1:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing |
| 12/30263853 DC : 0 | BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING |
| BS ISO 3672-2 : 2000 AMD 13326 | PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 10366-2 : 94 AMD 10665 | PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| CEI EN 62333-3 : 2011 | NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET |
| BS ISO 2580-2 : 94 AMD 10660 | PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 1163-2 : 1995 AMD 10744 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS |
| 08/30165044 DC : DRAFT FEB 2008 | BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| BS ISO 7391-2 : 1996 AMD 10746 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 14910-2:2013 | Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties |
| 04/30122412 DC : DRAFT SEP 2004 | ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES |
| BS EN 62329-2:2006 | Heat shrinkable moulded shapes Methods of test |
| BS ISO 2898-2 : 1997 AMD 10727 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 1622-2 : 1995 AMD 10649 | PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 15015:2011-07 | Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
| HD 631.1 : 200S2 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| BS ISO 28078-2:2009 | Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| I.S. EN 60544-2:2012 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV)) |
| NF ISO 17194 : 2009 | STRUCTURAL ADHESIVES - A STANDARD DATABASE OF PROPERTIES |
| I.S. EN 50395:2005 | ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
| I.S. EN 61340-4-8:2015 | ELECTROSTATICS - PART 4-8: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC DISCHARGE SHIELDING - BAGS |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| I.S. EN ISO 15015:2011 | PLASTICS - EXTRUDED SHEETS OF IMPACT-MODIFIED ACRYLONITRILE-STYRENE COPOLYMERS (ABS, AEPDS AND ASA) - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 17855-2:2016 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016) |
| I.S. EN 61537:2007 | CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS |
| BS 4618-2.3:1975 | Recommendations for the presentation of plastics design data. Electrical properties Volume resistivity |
| I.S. EN 60079-32-2:2015 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| I.S. EN ISO 25137-2:2017 | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| ISO 11833-1:2012 | Plastics Unplasticized poly(vinyl chloride) sheets Types, dimensions and characteristics Part 1: Sheets of thickness not less than 1 mm |
| EN ISO 7391-2:2006 | Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006) |
| EN ISO 20029-2:2018 | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017) |
| ISO 8605:2001 | Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification |
| I.S. EN ISO 8986-2:2009 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
| ISO 17194:2007 | Structural adhesives A standard database of properties |
| DIN EN ISO 6402-2:2004-05 | PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE-(ETHYLENE-PROPYLENE-DIENE)-STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN ISO 2897-2:2004-05 | PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
| IEC 62329-2:2006 | Heat-shrinkable moulded shapes - Part 2: Methods of test |
| BS EN ISO 3673-2:2012 | Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| ISO 17855-2:2016 | Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| ISO 1873-2:2007 | Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 1163-2:1995 | Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| UNE-EN 13415:2010 | Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites |
| ISO 2898-2:2008 | Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| DIN EN ISO 3673-2:2012-10 | Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
| UNE-EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| BS EN 12281:2002 | Printing and business paper. Requirements for copy paper for dry toner imaging processes |
| BS EN ISO 10350-2:2011 | Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics |
| EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| UNI EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| UNE-EN ISO 11963:2013 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| UNE-EN ISO 1874-2:2013 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN ISO 14663-2:2006 | Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999) |
| I.S. EN ISO 10350-2:2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| EN ISO 9988-2:2015 | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 9988-2:2006) |
| EN ISO 25137-2:2017 | Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009) |
| EN 13763-24:2002 | Explosives for civil uses - Detonators and relays - Part 24: Determination of the electrical non-conductivity of shock tube |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| UNI EN ISO 1874-2 : 2013 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN ISO 3673-2 : 2012 | PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS |
| UNI EN ISO 11963 : 2013 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| UNI EN ISO 2898-2 : 2009 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN ISO 7792-2 : 2013 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN 13415 : 2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| UNI EN 14125 : 2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| UNI EN ISO 14910-2 : 2013 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 60249-1 : 1993 COR 1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| UNI EN ISO 8986-2 : 2010 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 50281-1-1 : 98 AMD 1 2002 | ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING |
| UNI EN 14879-6 : 2010 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| BS 1755-1:1982 | Glossary of terms used in the plastics industry Polymer and plastics technology |
| UNI EN ISO 12086-2 : 2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 20029-2:2018 | Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
| 12/30263857 DC : 0 | BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER |
| I.S. EN ISO 6402-2:2004 | PLASTICS - ACRYLONITRILE-STYRENE-ACRYLATE (ASA), ACRYLONITRILE - (ETHYLENE-PROPYLENE-DIENE) - STYRENE (AEPDS) AND ACRYLONITRILE-(CHLORINATED POLYETHYLENE)-STYRENE (ACS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 60079-32-2:2015 | Explosive atmospheres Electrostatics hazards. Tests |
| BS EN 60544-4:2003 | Electrical insulating materials. Determination of the effects of ionizing radiation Classification system for service in radiation environments |
| BS ISO 16365-2:2014 | Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties |
| BS ISO 7792-2 : 1997 AMD 15252 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 2951:2012 | Rubber, vulcanized or thermoplastic Determination of insulation resistance |
| I.S. EN ISO 1873-2:2007 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| I.S. EN 12281:2002 | PRINTING AND BUSINESS PAPER - REQUIREMENTS FOR COPY PAPER FOR DRY TONER IMAGING PROCESSES |
| PREN 14125 : DRAFT 2011 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| I.S. EN ISO 1872-2:2007 | PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 8605:2001 | Textile-glass-reinforced plastics. Sheet moulding compound (SMC). Basis for specification |
| 11/30192003 DC : 0 | BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 05/30128281 DC : DRAFT JAN 2005 | ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 9988-2 : 2006 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 4618-2.4:1975 | Recommendations for the presentation of plastics design data. Electrical properties Surface resistivity |
| 07/30167352 DC : DRAFT AUG 2007 | BS EN 13415 - TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| DIN EN ISO 9988-2:2015-05 | PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 9988-2:2006) |
| 06/30130317 DC : DRAFT JULY 2006 | ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| BS ISO 14663-2 : 1999 AMD 16029 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 7933-2:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications |
| 01/704739 DC : DRAFT FEB 2001 | PREN 14125 - UNDERGROUND PIPEWORK FOR PETROL FILLING STATIONS |
| DD ENV 12281:1997 | Paper. Printing and business paper. Requirements for copy paper for dry toner imaging processes |
| 17/30354769 DC : 0 | BS EN ISO 29988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| PD IEC TR 61278:1997 | Live working. Guidelines for dielectric testing of tools and equipment |
| 03/118818 DC : DRAFT DEC 2003 | BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN ISO 19069-2:2016 | Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS 7290-2(1990) : 1990 AMD 10106 | PLASTICS FILMS FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| NF ISO 8605 : 2002 | PLASTIQUES RENFORCES AU VERRE TEXTILE - MATS PREIMPREGNES SMC - BASE DE SPECIFICATION |
| I.S. EN 1081:1998 | RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
| NF EN 60247 : 2004 | INSULATING LIQUIDS - MEASUREMENT OF RELATIVE PERMITTIVITY, DIELECTRIC DISSIPATION FACTOR (TAN DELTA) AND D.C. RESISTIVITY |
| 15/30304408 DC : 0 | BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS ISO 12086-2 : 2001 AMD 10637 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
| UNE-EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| ISA 61241-1 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD" |
| I.S. EN 60034-18-34:2012 | ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS (IEC 60034-18-34:2012 (EQV)) |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| CEI UNI EN ISO/IEC 80079-34 : 2013 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| I.S. EN ISO 20029-2:2018 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017) |
| ISO 11963:2012 | Plastics Polycarbonate sheets Types, dimensions and characteristics |
| DIN EN ISO 20028-2:2015-08 (Draft) | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| PREN ISO 11833-1 : DRAFT 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: SHEETS OF THICKNESS NOT LESS THAN 1 MM |
| NF EN 60674-2 : 98 AMD 1 2002 | SPECIFICATION FOR PLASTIC FILMS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| BS EN 1081:1998 | Resilient floor coverings. Determination of the electrical resistance |
| CEI EN 61106 : 1998 | VIDEODISKS METHODS OF MEASUREMENT FOR PARAMETERS |
| ISO 16365-2:2014 | Plastics — Thermoplastic polyurethanes for moulding and extrusion — Part 2: Preparation of test specimens and determination of properties |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| ISO 24453:2008 | Rubber Acquisition and presentation of comparable single-point data |
| I.S. EN ISO 14910-2:2013 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15) |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO 14910-2:2014 | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
| DIN EN ISO 11542-2:2010-01 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008) |
| UNE-EN ISO 7792-2:2013 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
| BS EN ISO 11963:2012 | Plastics. Polycarbonate sheets. Types, dimensions and characteristics |
| 02/124520 DC : DRAFT DEC 2002 | EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS |
| BS EN ISO 14529-2:2000 | Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| ISO 2897-2:2003 | Plastics Impact-resistant polystyrene (PS-I) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 1873-2:2007 | Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| IEC 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD" |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| BS EN 12576:1998 | Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC |
| ISO 14528-2:1999 | Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 20028-2:2017 | Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties |
| ISO 4613-2:1995 | Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN 13677-3:2003 | Reinforced thermoplastic moulding compounds. Specification for GMT Specific requirements |
| BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
| ISO/IEC 80079-34:2011 | Explosive atmospheres Part 34: Application of quality systems for equipment manufacture |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| ISO 1874-2:2012 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| IEC 62631-1:2011 | Dielectric and resistive properties of solid insulating materials - Part 1: General |
| IEC 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| EN ISO/IEC 80079-34:2011 | Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011) |
| ISO 2580-2:2003 | Plastics Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 10366-2:2003 | Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| ISO 14530-2:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| UNE-EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| ISO 4894-2:1995 | Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 14529-2:1999 | Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| UNE-EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 3672-2:2000 | Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
| IEC 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| I.S. EN 13415:2010 | TEST OF ADHESIVES FOR FLOOR COVERING - DETERMINATION OF THE ELECTRICAL RESISTANCE OF ADHESIVE FILMS AND COMPOSITES |
| BS EN ISO 14527-2:2000 | Preparation of test specimens and determination of properties |
| ISO 7792-2:2012 | Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| IEC 61537:2006 | Cable management - Cable tray systems and cable ladder systems |
| ISO 16396-2:2017 | Plastics Polyamide (PA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 10350:1993 | Plastics Acquisition and presentation of comparable single-point data |
| BS EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| BS EN 14598-3:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
| ISO 1622-2:1995 | Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| IEC 60034-18-34:2012 | Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems |
| ISO 6402-2:2003 | Plastics Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 11833-1:2012 | Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics Sheets of thickness not less than 1 mm |
| IEC 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| ISO 11542-2:1998 | Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| IEC 60672-2:1999 | Ceramic and glass insulating materials - Part 2: Methods of test |
| IEC 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| 11/30233799 DC : 0 | BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
| ISO 25137-2:2009 | Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| NF EN ISO 2898-2 : 2009 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ISO 14526-2:1999 | Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 10366-2:2003 | Plastics Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 8986-2:2009 | Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| IEC 61340-4-8:2014 | Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| ISO 9988-2:2006 | Plastics Polyoxymethylene (POM) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN 13763-24:2002 | Explosives for civil uses. Detonators and relays Determination of the electrical non-conductivity of shock tube |
| IEC 62333-3:2010 | Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet |
| ISO 3673-2:2012 | Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins |
| BS EN ISO 6402-2:2003 | Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 14663-2:2006 | Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 2897-2:2003 | Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 14526-2:2000 | Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties |
| EN 61340-4-8:2015 | Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN ISO 1163-2:1999 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995) |
| EN ISO 2898-2:2008 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN ISO 15252-2:1999 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999) |
| EN ISO 8986-2:2009 | Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009) |
| EN ISO 19069-2:2016 | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016) |
| EN ISO 15526-2:2004 | Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000) |
| EN 13677-3:2003 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
| EN 13677-2:2003 | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements |
| EN ISO 14529-2:1999 | Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999) |
| EN ISO 1874-2:2012 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012) |
| EN ISO 10366-2:2003 | Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003) |
| EN ISO 1873-2:2007 | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007) |
| EN ISO 3672-2:2001 | Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000) |
| EN ISO 2580-2:2003 | Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003) |
| EN ISO 16396-2:2017 | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 16396-2:2017) |
| EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| EN ISO 14530-2:1999 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999) |
| EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| EN ISO 20028-2:2017 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017) |
| EN ISO 17855-2:2016 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016) |
| EN ISO 1622-2:1999 | Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995) |
| EN ISO 4894-2:1999 | Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995) |
| EN ISO 14528-2:1999 | Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999) |
| EN ISO 1872-2:2007 | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007) |
| EN ISO 3673-2:2012 | Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
| EN ISO 14526-2:1999 | Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999) |
| EN ISO 14910-2:2013 | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15) |
| EN ISO 15103-2:2007 | Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2007) |
| EN ISO 11833-1:2012 | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm (ISO 11833-1:2012) |
| EN 14598-3:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| EN ISO 15015:2011 | Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods (ISO 15015:2011) |
| EN ISO 7792-2:2012 | Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) |
| EN ISO 6402-2:2003 | Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003) |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN ISO 14527-2:1999 | Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999) |
| EN ISO 2897-2:2003 | Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003) |
| NF EN 62631-1 : 2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| 11/30212452 DC : 0 | BS ISO 2951 - VULCANIZED RUBBER - DETERMINATION OF INSULATION RESISTANCE |
| 03/313661 DC : DRAFT SEP 2003 | EN 50395 - ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
| 04/30123435 DC : DRAFT OCT 2004 | IEC 62039 TR ED.1 - POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HV STRESS |
| ISO 23559:2007 | Plastics Film and sheeting Guidance on the testing of thermoplastic films |
| BS ISO 6402-2 : 94 AMD 10652 | |
| 02/205601 DC : DRAFT APR 2002 | IEC 60286-6. ED. 2.0 - CAPACITORS AND RESISTORS FOR ELECTRONIC EQUIPMENT - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 6: BULK CASE PACKAGING FOR SURFACE MOUNTING COMPONENTS |
| 02/205209 DC : DRAFT JULY 2002 | IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD' |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| 05/30129619 DC : DRAFT FEB 2005 | IEC 61537 ED.2 - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS FOR CABLE MANAGEMENT |
| BS EN 60544-2:2012 | Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test |
| 96/201186 DC : DRAFT FEB 1996 | IEC 60684-3-214 - FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION REQUIREMENTS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, NOT FLAME RETARDED, SHRINK RATIO 3:1 |
| BS EN 50290-2-30:2002 | Communication cables. Common design rules and construction Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
| BS EN ISO/IEC 80079-34:2011 | Explosive atmospheres Application of quality systems for equipment manufacture |
| BS EN 60247:2004 | Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan δ) and d.c. resistivity |
| CEI EN 60247 : 2004 | INSULATING LIQUIDS - MEASUREMENT OF RELATIVE PERMITTIVITY, DIELECTRIC DISSIPATION FACTOR (TAN DELTA) AND D.C. RESISTIVITY |
| 04/30123574 DC : DRAFT OCT 2004 | EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| NF EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| 13/30267324 DC : 0 | BS EN 61340-4-8 ED 2.0 - ELECTROSTATICS - PART 4-8: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC DISCHARGE SHIELDING - BAGS |
| I.S. EN ISO 19069-2:2016 | PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016) |
| I.S. EN 60249-1:1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| BS IEC 61340-5.1 : 1998 AMD 13198 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS |
| BS EN 60672-2:2000 | Ceramic and glass insulating materials Methods of test |
| BS ISO 1268-8:2004 | Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC |
| 08/30170332 DC : DRAFT JAN 2008 | BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 15/30304402 DC : 0 | BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| ASTM D 5575 : 2007 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| BS EN 61340-4-5:2004 | Electrostatics Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| PD IEC/TR 62039:2007 | Selection guide for polymeric materials for outdoor use under HV stress |
| IEC 60544-4:2003 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
| 09/30194359 DC : 0 | BS EN 60034-18-34 - ROTATING ELECTRICAL MACHINES - PART 18-34: FUNCTIONAL EVALUATION OF INSULATION SYSTEMS - TEST PROCEDURES FOR FORM-WOUND WINDINGS - EVALUATION OF THERMOMECHANICAL ENDURANCE OF INSULATION SYSTEMS |
| 04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS 3126:1987 | Method of specifying toughened polystyrene (SB) moulding and extrusion materials |
| BS ISO 11833-1:1998 | Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm |
| 07/30152076 DC : 0 | BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| CEI EN 60544-4 : 2005 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 4: CLASSIFICATION SYSTEM FOR SERVICE IN RADIATION ENVIRONMENTS |
| CSA C22.2 No. 0.17 : 2000 : R2004 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| DIN 28055-2:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 2: PROOF OF SUITABILITY AND TESTING |
| BS EN ISO 9988-2:2015 | Plastics. Polyoxymethylene (POM) moulding and extrusion materials Preparation of test specimens and determination of properties |
| PREN ISO 11963 : DRAFT 2011 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| I.S. EN 14879-6:2009 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| UNE-EN 62631-1:2012 | Dielectric and resistive properties of solid insulating materials - Part 1: General |
| DIN EN 1081:1998-04 | RESILIENT FLOOR COVERINGS - DETERMINATION OF THE ELECTRICAL RESISTANCE |
| I.S. EN ISO 20028-2:2017 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017) |
| CEI EN 61340-4-5 : 2006 | ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERISING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
| IEC TR 62392:2006 | Suitability of typical electrical insulating material (EIM) for polymer recycling |
| I.S. EN ISO 16396-2:2017 | PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 16396-2:2017) |
| I.S. EN 60455-3-8:2013 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV)) |
| I.S. EN 60672-2:2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
| ISO 20557-2:2018 | Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 2: Preparation of test specimen and determination of properties |
| I.S. EN 62631-1:2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| ISO 28078-2:2009 | Plastics Poly(phenylene sulfide) (PPS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| UNI CEI EN ISO/IEC 80079-34 : 2012 | EXPLOSIVE ATMOSPHERES - PART 34: APPLICATION OF QUALITY SYSTEMS FOR EQUIPMENT MANUFACTURE |
| BS ISO 14309:2011 | Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity |
| DIN EN ISO 25137-2:2016-08 (Draft) | PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009) |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| I.S. EN 50290-2-30:2002 | COMMUNICATION CABLES - PART 2-30: COMMON DESIGN RULES AND CONSTRUCTION - POLY(TETRAFLUOROETHYLENE-HEXAFLUOROPROPYLENE) (FEP) INSULATION AND SHEATHING |
| ISO 7391-2:2006 | Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 14309:2011 | Rubber, vulcanized or thermoplastic Determination of volume and/or surface resistivity |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| IEC TR 62039:2007 | Selection guide for polymeric materials for outdoor use under HV stress |
| I.S. EN 60247:2004 | INSULATING LIQUIDS - MEASUREMENT OF RELATIVE PERMITTIVITY, DIELECTRIC DISSIPATION FACTOR (TAN DELTA) AND D.C. RESISTIVITY |
| DIN EN ISO 7792-2:2013-03 | PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012) |
| DIN EN ISO 10366-2:2004-05 | PLASTICS - METHYL METHACRYLATE-ACRYLONITRILE-BUTADIENE-STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN EN 14125:2013-09 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| BS EN ISO 8986-2:2009 | Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties |
| UNE-EN 60079-32-2:2016 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| BS EN ISO 15103-2:2007 | Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
| BS EN ISO 14910-2:2013 | Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties |
| ISO 15252-2:1999 | Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 2898-2:2008 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials Preparation of test specimens and determination of properties (ISO 2898-2:2008) |
| UNE-EN ISO 3673-2:2013 | Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012) |
| BS EN ISO 1163-2:2000 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO 1872-2:2007 | Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 14663-2:1999 | Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods |
| ISO 14527-2:1999 | Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties |
| ISO 15526-2:2000 | Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 7792-2:2012 | Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties |
| 02/124519 DC : DRAFT DEC 2002 | EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| BS EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures |
| ISO 15015:2011 | Plastics Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) Requirements and test methods |
| DIN EN ISO 2898-2:2009-03 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| DIN 2874:2002-06 | Flanged steel pipes and flanged steel or cast iron pipes and fittings with PTFE or PFA linings – Technical delivery conditions |
| NF EN ISO 2897-2 : 2004 | PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 50290-2-30:2002 | Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
| EN 50395 : 2005 AMD 1 2011 | ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| DIN EN ISO 14663-2:2006-06 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 60544-4:2003 | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
| DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 62329-2:2006 | Heat shrinkable moulded shapes - Part 2: Methods of test |
| DIN EN ISO 14910-2:2013-06 | PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013) |
| EN 60286-6:2004 | Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN 61537:2007 | Cable management - Cable tray systems and cable ladder systems |
| EN 60672-2:2000 | Ceramic and glass insulating materials - Part 2: Methods of test |
| DIN EN ISO 14923:2003-10 | THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS |
| EN 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| DIN EN ISO 8986-2:2010-04 | PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| EN 62631-1 : 2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL (IEC 62631-1:2011) |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| NBR IEC/TR 62039 : 2010 | SELECTION GUIDE FOR POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HIGH VOLTAGE STRESS |
| BS 4935:1989 | Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials |
| BS 7008-1(1994) : AMD 8821 | ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.