IEC 60079-10:2002
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
09-12-2008
Superseded by
Language(s)
English - French, English, French, Spanish, Castilian
Published date
19-06-2002
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 General
1.1 Scope
1.2 Normative references
2 Definitions and terms
3 Safety and area classification
3.1 Safety principles
3.2 Area classification objectives
4 Area classification procedure
4.1 General
4.2 Sources of release
4.3 Type of zone
4.4 Extent of zone
4.4.1 Release rate of gas or vapour
4.4.2 Lower explosive limit (LEL)
4.4.3 Ventilation
4.4.4 Relative density of the gas or vapour when
it is released
4.4.5 Other parameters to be considered
4.4.6 Illustrative examples
5 Ventilation
5.1 General
5.2 Main types of ventilation
5.3 Degree of ventilation
5.4 Availability of ventilation
6 Documentation
6.1 General
6.2 Drawings, data sheets and tables
Annex A (informative) Examples of sources of release
Annex B (informative) Ventilation
Annex C (informative) Examples of hazardous area classification
Figures
Is concerned with the classification of hazardous areas whereflammable gas or vapour risks may arise, in order to permit theproper selection and installation of apparatus for use in suchhazardous areas.
| Committee |
TC 31/SC 31J
|
| DocumentType |
Standard
|
| Pages |
115
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS C 60079-10:2008 | Identical |
| AS/NZS 60079.10:2004 | Identical |
| EN 60079-10:2003 | Identical |
| SS-ISO 4269:2002 | Identical |
| SN EN 60079-10 : 2003 | Identical |
| UNE-EN 60079-10:2004 | Identical |
| CEI EN 60079-10 : 2004 | Identical |
| NEN EN IEC 60079-10 : 2003 | Identical |
| I.S. EN 60079-10:2003 | Identical |
| PN EN 60079-10 : 2003 | Identical |
| NF EN 60079-10 : 2003 | Identical |
| DIN EN 60079-10 : 2004 | Identical |
| BS EN 60079-10:2003 | Identical |
| NEN 10079-10 : 1996 | Identical |
| I.S. 821:2006 | GAS PRESSURE REGULATING STATIONS FOR DISTRIBUTION |
| IEEE 303-2004 | IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations |
| API MPM CH2.2F:2004 | PETROLEUM AND LIQUID PETROLEUM PRODUCTS - CALIBRATION OF HORIZONTAL CYLINDRICAL TANKS - PART 2: INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHOD |
| I.S. EN ISO 10439:2002 | PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS |
| 03/107320 DC : DRAFT APR 2003 | EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| BIS IS 15118 : 2014 | HYDROMETRY - WATER LEVEL MEASURING DEVICES |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| ISO 12917-2:2002 | Petroleum and liquid petroleum products — Calibration of horizontal cylindrical tanks — Part 2: Internal electro-optical distance-ranging method |
| UNI EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 03/313421 DC : DRAFT NOV 2003 | IEC 60079-28 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 28: RISK OF IGNITION BY RADIATION OF EXPLOSIVE ATMOSPHERES OF GAS, VAPOUR OR MIST FROM OPTICAL RADIATION EQUIPMENT AND TRANSMISSION SYSTEMS |
| CLC/TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| 13/30279579 DC : 0 | BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY |
| BS EN 15001-2:2008 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance |
| 09/30198043 DC : 0 | BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| 10/30227668 DC : 0 | BS EN 14678-3 - LPG EQUIPMENT AND ACCESSORIES - PART 3: REFUELLING INSTALLATIONS AT PRIVATE AND INDUSTRIAL PREMISES |
| BS EN 50054:1999 | Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| 01/208810 DC : 0 | IEC 62185 ED.2 - INDUSTRIAL-PROCESS CONTROL - SAFETY OF ANALYZER HOUSES |
| 10/30227671 DC : 0 | BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| BS EN 14677:2008 | Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel |
| 17/30356593 DC : 0 | BS EN ISO 15138 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| 06/30157092 DC : 0 | ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY |
| EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| BS EN ISO 15138:2007 | Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning |
| I.S. EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV)) |
| ISO 10574:1993 | Refrigerated light-hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Float-type level gauges |
| CSA C22.2 No. 62282-2 : 2007 : R2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 1474-1:2008 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| I.S. 822:2007 | GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE PIPELINES |
| UNI EN ISO 15138 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| ISO 15138:2007 | Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning |
| I.S. EN 61779-1:2003 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| NF ISO 16110-1 : 2009 | HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY |
| GOST R IEC 62086-2 : 2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| ISO 4269:2001 | Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| I.S. EN 12954:2001 | CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
| DIN EN 14678-2:2012-04 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements (includes Amendment A1:2012) |
| BS EN ISO 10442:2002 | Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors |
| UNE-EN 1127-1:2012 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| BS EN ISO 10439:2002 | Petroleum, chemical and gas service industries. Centrifugal compressors |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| 05/30060689 DC : DRAFT JUN 2005 | IEC 62282-3-1 - FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER PLANTS - SAFETY |
| BS EN 14678-2 : 2007 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
| IEC 62282-3-1:2007 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| IEC 62086-2:2001 | Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2: Application guide for design, installation and maintenance |
| I.S. EN 14678-2:2007 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
| EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
| EN 62282-3-1 : 2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| DIN EN 12952-14:2004-09 | Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 12954:2001 | Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines |
| EN 62282-3-3:2008 | Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation |
| EN 62086-1:2005 | Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements |
| EN 12215:2004+A1:2009 | Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| EN 62086-2:2005 | Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2: Application guide for design, installation and maintenance |
| DEFSTAN 00-101(PT3)/1(2005) : 2005 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION |
| DEFSTAN 00-101(PT2)/1(2005) : 2005 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES |
| DEFSTAN 00-101(PT3)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION |
| DEFSTAN 00-101(PT1)/1(2005) : 2005 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 1: SURFACE SHIPS |
| DEFSTAN 00-101(PT1)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 1: SURFACE SHIPS |
| EN 50054:1998 | Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods |
| BS 3680-7:2000 | Measurement of liquid flow in open channels Specification of equipment for the measurement of water level |
| BS 6656:2002 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide |
| 04/30105027 DC : DRAFT JUNE 2004 | ISO 21789 - GAS TURBINES - SAFETY |
| BS EN 62282-5-1:2012 | Fuel cell technologies Portable fuel cell power systems. Safety |
| 16/30301340 DC : 0 | BS ISO 19723-1 - ROAD VEHICLES - LIQUEFIED NATURAL GAS (LNG) FUEL SYSTEMS - PART 1: SAFETY REQUIREMENTS |
| 09/30201361 DC : 0 | BS ISO 12643-2 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PRESS EQUIPMENT AND SYSTEMS |
| NF EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| 03/300201 DC : DRAFT FEB 2003 | IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| BS 4727-2:GRP13(1991) : 1991 | GLOSSARY OF ELECTROTECHNICAL, POWER, TELECOMMUNICATION, ELECTRONICS, LIGHTING AND COLOUR TERMS - TERMS PARTICULAR TO POWER ENGINEERING - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
| 04/30115023 DC : DRAFT JUL 2004 | CLC TR 50427 - ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE |
| 00/241099 DC : DRAFT MAR 2000 | IEC 60079-17 EDITION 3 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES) |
| BS EN 62086-2:2005 | Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating Application guide for design, installation and maintenance |
| PD CLC/TS 62603-1:2014 | Industrial process control systems. Guideline for evaluating process control systems Specifications |
| 16/30301343 DC : 0 | BS ISO 19723-2 - ROAD VEHICLES - LIQUEFIED NATURAL GAS (LNG) FUEL SYSTEMS - PART 2: TEST METHODS |
| BS 5501-3:1977 | Electrical apparatus for potentially explosive atmospheres Pressurized apparatus \'p\' |
| BS ISO 18132-2:2008 | Refrigerated light hydrocarbon fluids. General requirements for automatic level gauges Gauges in refrigerated-type shore tanks |
| BS IEC 60092-502:1999 | Electrical installation in ships Tankers. Special features |
| 12/30270980 DC : 0 | BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| CSA PLUS 2203 : 2001 | HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES |
| 05/30127970 DC : DRAFT JAN 2005 | EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| ISA 12.13.01 : 2003 | PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS |
| NF EN 50381 : 2004 | TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE |
| I.S. EN 1127-1:2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| GOST R IEC 62086-1 : 2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATERS - PART 1: GENERAL TECHNICAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 62282-3-1:2007 | FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| I.S. EN 15112:2006 | EXTERNAL CATHODIC PROTECTION OF WELL CASINGS |
| I.S. EN 13616-1:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| UNE-EN 14678-2:2009 | LPG equipment and accessories - Equipment for Liquefied Petroleum Gas automotive filling stations - Part 2: Components other than dispensers, and installation requirements |
| IEC 61779-6:1999 | Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases |
| API MPM CH2.2F : 2004 : R2012 | PETROLEUM AND LIQUID PETROLEUM PRODUCTS - CALIBRATION OF HORIZONTAL CYLINDRICAL TANKS - PART 2: INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHOD |
| API 500 RUSSIAN :1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 500 RUSSIAN : 1997 : R2002 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| NF EN 15339-2 : 2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| EN 14236:2007 | Ultrasonic domestic gas meters |
| I.S. EN 62086-2:2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14197-3:2005-09 | Cryogenic vessels - Static non vacuum insulated vessels - Part 3: Operational requirements |
| DIN EN 12215:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| DIN EN 12279:2005-12 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12981:2010-06 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 12981 : 2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| IEC 61779-1:1998 | Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods |
| EEMUA 181 : 1995 | GUIDE TO RISK BASED ASSESSMENTS OF IN-SITU LARGE EX 'E' AND EX 'N' MACHINES |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| I.S. EN 12215:2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN EN 1127-1:2011-10 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN 13852-1:2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
| I.S. EN 12921-3:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| DIN EN 13852-2:2005-03 | Cranes - Offshore cranes - Part 2: Floating cranes |
| I.S. EN 12981:2005 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| DIN EN 13636:2004-10 | Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004 |
| DIN EN 15339-2:2007-06 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| I.S. EN ISO 13702:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015) |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| VDE 0165-10 : 1999 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES) |
| NF EN 15112 : 2006 | EXTERNAL CATHODIC PROTECTION OF WELL CASING |
| VDI 2260:2003-10 | Technical warranty for gas cleaning equipment - Particulate and gaseous matter |
| VDI 4631:2011-02 | Quality criteria for biogas plants |
| BIS IS/IEC 60079-18 : 2009 | EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' |
| DIN EN 61779-1 : 2001 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| ONORM EN ISO 4373 : 2009 | HYDROMETRY - WATER LEVEL MEASURING DEVICES |
| UNE-EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| I.S. EN 15001-2:2008 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| DIN EN 1474-1:2009-03 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| 07/30174641 DC : DRAFT DEC 2007 | BS EN 62305-3 - PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
| 12/30262932 DC : 0 | BS EN 15339-3 - THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 3: TORCHES FOR THERMAL SPRAYING AND THEIR CONNECTION AND SUPPLY UNITS |
| PD CEN/TR 16061:2010 | Gas meters. Smart gas meters |
| BS ISO 12917-2:2002 | Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks Internal electro-optical distance-ranging method |
| 13/30271407 DC : DRAFT DEC 2013 | BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| BS IEC 62086-1 : 2001 AMD 16069 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS |
| I.S. EN ISO 15138:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING |
| NF EN 15001-2 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| BS EN 15112:2006 | External cathodic protection of well casing |
| DIN EN 14677:2008-11 | SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| I.S. EN 62086-1:2005 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS |
| CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide |
| NF EN 62282-3-3 : 2008 | FUEL CELL TECHNOLOGIES - PART 3-3: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION |
| ISO 18132-2:2008 | Refrigerated light hydrocarbon fluids — General requirements for automatic level gauges — Part 2: Gauges in refrigerated-type shore tanks |
| 13/30286135 DC : 0 | BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE |
| 06/30127203 DC : DRAFT OCT 2006 | ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING |
| NF ISO 14661 : 2000 AMD 1 2004 | THERMAL TURBINES FOR INDUSTRIAL APPLICATIONS (STEAM TURBINES, GAS EXPANSION TURBINES) - GENERAL REQUIREMENTS |
| I.S. EN 13616-2:2016 | OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE |
| ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
| 05/30128234 DC : DRAFT FEB 2005 | EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| BS EN 62086-1:2005 | Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating General and testing requirements |
| BS 5266-2:1998 | Emergency lighting Code of practice for electrical low mounted way guidance systems for emergency use |
| NF EN 62086-2 : 2006 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| NF EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| 04/30112677 DC : 0 | IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| 04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| 03/305413 DC : DRAFT APR 2003 | IEC 61285 ED. 2.0 - INDUSTRIAL PROCESS CONTROL - SAFETY OF ANALYZER HOUSES |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| 08/30191891 DC : DRAFT OCT 2008 | BS EN 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
| BS ISO 21789:2009 | Gas turbine applications — Safety |
| SAE J 2578 : 2014 | RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY |
| NF EN 1474-1 : 2009 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
| NF EN 60079-30-2 : 2007 | ELECTRICAL ATMOSPHERES - PART 2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| I.S. EN 15339-2:2007 | THERMAL SPRAYING - SAFETY REQUIREMENTS FOR THERMAL SPRAYING EQUIPMENT - PART 2: GAS CONTROL UNITS |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| UNI EN 15001-2 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE |
| BIS IS/IEC 60079-30-1 : 2007 | EXPLOSIVE ATMOSPHERES - PART 30: ELECTRICAL RESISTANCE TRACE HEATING - SECTION 1: GENERAL AND TESTING REQUIREMENTS |
| I.S. EN 14236:2007 | ULTRASONIC DOMESTIC GAS METERS |
| ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
| ISA 60079-29-2 : 2012 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
| BIS IS/IEC 60079-30-2 : 2007 | EXPLOSIVE ATMOSPHERES - PART 30: ELECTRICAL RESISTANCE TRACE HEATING - SECTION 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| CEI EN 50381 : 2006 | TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE |
| BS EN 1127-1:2019 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| ISO 19372:2015 | Microturbines applications — Safety |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| IEC 60092-502:1999 | Electrical installations in ships - Part 502: Tankers - Special features |
| ISO 21789:2009 | Gas turbine applications — Safety |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| EEMUA 186 : 2016 | A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS EN 12921-3 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| BS EN 12215 : 2004 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| ISO 28300:2008 | Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks |
| BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN ISO 13702:2015 | Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| EN 1474-1:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
| UNI EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| CEI EN 50272-2 : 2002 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 815 : 2009 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| UNI EN 12981 : 2009 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 12757-1 : 2010 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| CSA E60079.14 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL INSTALLATIONS IN EXPLOSIVE GAS ATMOSPHERES (OTHER THAN MINES) |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| UNI EN 13852-1 : 2013 | CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
| UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN ISO 28300 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN 14678-2 : 2012 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 2: COMPONENTS OTHER THAN DISPENSERS AND INSTALLATION REQUIREMENTS |
| I.S. EN 12279:2000 | GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS |
| UNI EN 12215 : 2010 | COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS |
| UNI EN 12921-3 : 2009 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| 06/30092802 DC : DRAFT SEP 2006 | ISO 4373 - HYDROMETRY - WATER-LEVEL MEASURING DEVICES |
| 03/305097 DC : DRAFT MAR 2003 | IEC 62305-3 - PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
| 04/30112683 DC : 0 | IEC 61779-6 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 6: GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES |
| NF EN 60079-29-2 : 2008 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
| BS EN 62282-3-1:2007 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| UNE-EN 62282-3-1:2011 | Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety |
| 02/209270 DC : DRAFT OCT 2002 | IEC 62305-3 - PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
| DEFSTAN 00-101(PT2)/2(2008) : 2008 | DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES |
| PREN 14678-1 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| BS ISO 7507-5:2000 | Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks External electro-optical distance-ranging method |
| BS IEC 61832:1999 | Analyser systems. Guide to technical enquiry and bid evaluation |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| ISO 7507-5:2000 | Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 5: External electro-optical distance-ranging method |
| BS ISO 13689:2001 | Refrigerated light hydrocarbon fluids. Measurement of liquid levels in tanks containing liquefied gases. Microwave-type level gauge |
| 04/30068318 DC : DRAFT APR 2004 | IEC 62086-2 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
| BS PD IEC/TS 62603-1 : 2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| BS EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device |
| NF EN ISO 28300 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| 09/30194936 DC : DRAFT JAN 2009 | BS EN ISO 28460 - PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS |
| 07/30174633 DC : DRAFT DEC 2007 | BS EN 62305-2 - PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT |
| BS EN ISO 4373:2008 | Hydrometry. Water level measuring devices |
| PD CLC/TR 50427:2004 | Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide |
| BIS IS/IEC 60079-26 : 2006 | EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA |
| UNI EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| CEI CLC/TR 50427 : 2005 | ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE |
| NF EN ISO 4373 : 2009 | HYDROMETRY - WATER LEVEL MEASURING DEVICES |
| ANSI/AIHA/ASSP Z9.9-2010 | PORTABLE VENTILATION SYSTEMS |
| NF ISO 12917-2 : 2003 | PETROLEUM AND LIQUID PETROLEUM PRODUCTS - CALIBRATION OF HORIZONTAL CYLINDRICAL TANKS - PART 2: INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHOD |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| DD ENV 14236:2002 | Ultrasonic domestic gas meters |
| API MPMS CH2.2F : 2004(R2014) | PETROLEUM AND LIQUID PETROLEUM PRODUCTS - CALIBRATION OF HORIZONTAL CYLINDRICAL TANKS - PART 2: INTERNAL ELECTRO-OPTICAL DISTANCE-RANGING METHOD |
| I.S. CEN/TR 14489:2005 | FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
| BIS IS/IEC 60079-28 : 2006 | EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION |
| EN ISO 15138:2007 | Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007) |
| DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| IEC TS 62603-1:2014 | Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| I.S. EN 62282-3-3:2008 | FUEL CELL TECHNOLOGIES - PART 3-3: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION |
| NF EN 12954 : 2001 | CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
| DIN EN 13852-1:2014-01 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| BS EN ISO 28300:2008 | Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| 07/30169755 DC : 0 | BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING |
| IEC 60079-30-1:2007 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| IEC 60079-30-2:2007 | Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance |
| BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| IEC 62282-3-3:2007 | Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation |
| BS EN 60335-2-40 : 2003 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| BS EN 14236:2007 | Ultrasonic domestic gas meters |
| BS EN 12954:2001 | Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines |
| 05/30138005 DC : DRAFT AUG 2005 | IEC 60079-14 ED 4 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES) |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| BS EN 13645:2002 | Installations and equipment for liquefied natural gas. Design of onshore installations with a storage capacity between 5 t and 200 t |
| BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment Gas control units |
| 11/30242646 DC : DRAFT FEB 2011 | BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| BS ISO 19372:2015 | Microturbines applications. Safety |
| UNE-EN ISO 28300:2012 | Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008) |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| 10/30173705 DC : DRAFT SEP 2010 | BS EN 62282-5-1 - FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 12279:2000 | Gas supply systems. Gas pressure regulating installations on service lines. Functional requirements |
| 04/30089617 DC : DRAFT MARCH 2004 | |
| ISO 4373:2008 | Hydrometry Water level measuring devices |
| 12/30210113 DC : 0 | BS EN ISO 28300 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| 12/30218781 DC : DRAFT JAN 2012 | BS EN 60335-2-40 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| BS EN 13636:2004 | Cathodic protection of buried metallic tanks and related piping |
| UNE-EN 13852-1:2014 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| DIN EN ISO 4373:2009-01 | Hydrometry - Water level measuring devices (ISO 4373:2008) |
| EN 15112:2006 | External cathodic protection of well casings |
| EI Model code of safe practice Part 15:2015 | MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN 15001-2:2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN ISO 4373:2008 | Hydrometry - Water level measuring devices (ISO 4373:2008) |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 14678-2:2007+A1:2012 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements |
| EN 13616-1:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
| EN ISO 10442:2002 | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002) |
| EN 815:1996+A2:2008 | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
| EN 13645:2001 | Installations and equipment for liquefied natural gas - Design of onshore installations with a storage capacity between 5 t and 200 t |
| EN 14677:2008 | Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
| EN 13636:2004 | Cathodic protection of buried metallic tanks and related piping |
| EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
| EN ISO 10439:2002 | Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002) |
| BS EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device |
| BS ISO 4269:2001 | Petroleum and liquid petroleum products. Tank calibration by liquid measurement. Incremental method using volumetric meters |
| 10/30214970 DC : 0 | BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS |
| BS IEC 61831:1999 | On-line analyser systems. Guide to design and installation |
| 10/30238615 DC : DRAFT NOV 2010 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS IEC 62086-2 : 2001 AMD 16068 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE |
| S.R. CLC/TS 62603-1:2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| BS EN 62282-3-3:2008 | Fuel cell technologies Stationary fuel cell power systems. Installation |
| DIN EN ISO 28300:2008-11 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| UNE-EN 13616-2:2016 | Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device |
| IEC 60309-3:1994 | Plugs, socket-outlets and couplers for industrial purposes - Part 3: Particular requirements for plugs, socket-outlets, connectors and appliance inlets for use in explosive gas atmospheres |
| 07/30169774 DC : 0 | BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING |
| 08/30186475 DC : 0 | BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 05/30135286 DC : 0 | EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
| I.S. CLC TR 50427:2005 | ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE |
| 04/30068313 DC : DRAFT APR 2004 | IEC 62086-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 1: GENERAL AND TESTING REQUIREMENTS |
| NF EN 60079-30-1 : 2007 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| 01/208953 DC : DRAFT DEC 2001 | IEC 61936-3 ED.1 - POWER INSTALLATIONS EXCEEDING 1 KV AC - PART 3: PARTICULAR REQUIREMENTS FOR POWER GENERATION AND INDUSTRIAL INSTALLATIONS |
| 07/30167448 DC : 0 | BS EN 60079-13 - EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM "P" |
| BS EN 61779-1:2000 | Electrical apparatus for the detection and measurement of flammable gases General requirements and test methods |
| ISO 13689:2001 | Refrigerated light hydrocarbon fluids Measurement of liquid levels in tanks containing liquefied gases Microwave-type level gauge |
| CEN/TR 16061:2010 | Gas meters - Smart Gas Meters |
| IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
| CSA C22.2 No. 62282-2 :2007 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| PREN 1127-2 : DRAFT 2012 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING |
| I.S. EN 14677:2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| UNI EN ISO 4373 : 2009 | HYDROMETRY - WATER LEVEL MEASURING DEVICES |
| BS EN 1127-1:2011 | Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| I.S. EN ISO 4373:2008 | HYDROMETRY - WATER LEVEL MEASURING DEVICES |
| PD 60079-14:2000 | Guide to application of BS EN 60079-14 |
| DIN EN ISO 28300:2012-02 (Draft) | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 12921-3:2010-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008) |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| BS EN 13852-2:2004 | Cranes. Offshore cranes Floating cranes |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| 16/30354067 DC : 0 | BS EN 62282-5-100 - FUEL CELL TECHNOLOGIES - PART 5-100: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY |
| BS EN 13852-1:2013 | Cranes. Offshore cranes General-purpose offshore cranes |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 15112:2006-10 | External cathodic protection of well casings |
| EN 12921-3:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
| EN 12981:2005+A1:2009 | Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
| DIN EN 815:1996-11 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| EN 62282-5-1:2012 | FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012) |
| EN 61779-1 : 2000 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN ISO 13702:1999 | Petroleum and natural gas industries - Control and migration of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
| DIN EN 815:2009-12 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| DIN EN 15001-2:2010-04 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| EN 60335-2-40:2003/A13:2012/AC:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| PIP ELEHA01 : 2016 | ENGINEERING GUIDE FOR DETERMINING ELECTRICAL AREA CLASSIFICATION |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| I.S. EN 60335-2-40:2006 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS (IEC 60335-2-40:2002 (MOD)) |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| IEC TR 60079-20:1996 | Electrical apparatus for explosive gas atmospheres - Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| IEC 60079-4A:1970 | Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignition temperature - First supplement. *Note.-This supplement applies also to the second edition of 1975 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.