IEC 60068-2-3:1969
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
01-08-2001
Language(s)
English - French, Russian
Published date
01-01-1969
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
PREFACE
1 Scope
2 Testing chamber
3 Testing procedure
4 Recovery
5 Final measurements
6 Information required in the relevant specification
Describes a continuous test at a steady temperature of 40°C and a relative humidity of 90-95%. The standard test duration is 4 to 56 days.
| Committee |
TC 104
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| JIS C 0022:1987 | Identical |
| DIN IEC 60068-2-3:1986-12 | Identical |
| CEI 50-3 V1 : 1986 | Identical |
| BS 2011-2.1Ca:1977 | Identical |
| UNE 20501-2-3:1986 | Identical |
| NFC 20 703 : 1986 | Identical |
| HD 323.2.3 : 200S2 | Identical |
| NEN 10068-2-3 : 1985 | Identical |
| AS 1099.2.3-1990 | Identical |
| NBN C 83 255 : 1984 | Identical |
| BS EN 61747-5:1998 | Liquid crystal and solid-state display devices Environmental, endurance and mechanical test methods |
| BS EN 60873:1993 | Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems |
| CEI EN 60512-11-3 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS TEST 11C: DAMP HEAT, STEADY STATE |
| 11/30205541 DC : 0 | BS EN 54-7 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONISATION |
| 03/106844 DC : DRAFT MAY 2003 | ISO 7240-11 - FIRE DETECTION AND ALARM SYSTEMS - PART 11: MANUAL CALL POINTS |
| BS 7573-1.1(1992) : 1992 AMD 8338 | METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - GENERAL |
| BS CECC 43000(1982) : AMD 7315 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS |
| BS EN 60938-1:2000 | Fixed inductors for electromagnetic interference suppression Generic specification |
| IEC 61045-1:1991 | Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification |
| DIN EN 60868 : 1994 | FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
| BS EN 60966-1:1999 | Radio frequency and coaxial cable assemblies Generic specification. General requirements and test methods |
| BS ISO 11614:1999 | Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas |
| BS CECC 16000-1:1992 | Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays General |
| BS EN 61204:1995 | Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements |
| BS EN 171000:2001 | Harmonized system of quality assessment for electronic components. Generic specification. Filters using waveguide type dielectric resonators |
| 03/106843 DC : DRAFT MAY 2003 | ISO 7240-6 - FIRE DETECTION AND ALARM SYSTEMS - PART 6: POINT-TYPE FIRE DETECTORS FOR DETECTION OF CARBON MONOXIDE |
| 04/30122860 DC : DRAFT SEP 2004 | ISO 7240-22 - FIRE DETECTION AND FIRE ALARM EQUIPMENT - PART 22: DUCT SAMPLING EQUIPMENT |
| BS EN 60749:1999 | Semiconductor devices. Mechanical and climatic test methods |
| 95/216358 DC : 0 | PREN 50228-1 - PERFORMANCE REQUIREMENTS AND TEST METHODS FOR CONTROL AND MONITORING PH ANALYSERS FOR USE IN THE WATER INDUSTRY - PART 1: SPECIFICATION AND TEST METHODS FOR ASSESSING PERFORMANCE UNDER LABORATORY CONDITIONS |
| BS 123100-003:2001 | System of quality assessment. Capability detail specification. Rigid single-sided and double-sided printed boards with plain holes |
| 02/709474 DC : DRAFT JULY 2002 | BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES |
| DIN EN 138000 : 1997 | GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| BS 6796:1986 | Specification for flickermeters |
| 02/540596 DC : DRAFT JULY 2002 | PREN 54-17 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 17: SHORT CIRCUIT ISOLATORS |
| BS 7526(1991) : 1991 AMD 7980 | METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOWMETERS |
| 05/30132097 DC : DRAFT JUNE 2005 | IEC 60679-1 ED 3 - QUARTZ CRYSTAL CONTROLLED OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| 02/211632 DC : DRAFT DEC 2002 | IEC 69747-5-4 ED.1 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-4: OPTOELECTRONIC DEVICES - SEMICONDUCTOR LASERS |
| 01/205810 DC : DRAFT AUG 2001 | IEC 61215 ED.2.0 - CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL |
| 07/30166909 DC : DRAFT AUG 2007 | BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS CECC68000(1990) : AMD 9184 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: QUARTZ CRYSTAL UNITS |
| I.S. EN 168000:1994 | QUARTZ CRYSTAL UNITS (GENERIC SPECIFICATION) |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| NF EN 61249 5-4 : 1997 | MATERIALS FOR INTERCONNECTION STRUCTURES - PART 5: SECTIONAL SPECIFICATION SET FOR CONDUCTIVE FOILS AND FILMS WITH OR WITHOUT COATINGS - SECTION 4: CONDUCTIVE INKS |
| XP X08 150 : 2007 XP | INFORMATION AND SAFETY DEVICES - WIRELESS RISK INFORMATION SYSTEM (IRIS.RADIO) |
| I.S. EN 61248-1:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| IEC 61253-1:1993 | Piezoelectric ceramic resonators - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval |
| ISO 10546:1993 | Chemical conversion coatings Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| I.S. EN 61248-7:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 7: SECTIONAL SPECIFICATION FOR HIGH-FREQUENCY INDUCTORS AND INTERMEDIATE FREQUENCY TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
| IEC 60249-3-3:1991 | Base materials for printed circuits - Part 3: Special materials used in connection with printed circuits - Specification No. 3: Permanent polymer coating materials (solder resist) for use in the fabrication of printed boards |
| NF EN 60122-1 : 2003 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| BS EN 16602-70-10:2015 | Space product assurance. Qualification of printed circuit boards |
| BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
| IEC 61747-5:1998 | Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods |
| IEC 60873:1986 | Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems |
| IEC 60835-1-1:1990 | Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section One: General |
| IEC 61249-5-4:1996 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks |
| EN 60747-5-2:2001/A1:2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| EN 61249-8-7:1996 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks |
| EN 61249-5-4:1996 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 4: Conductive inks |
| EN 134000:1994 | Generic Specification: Variable capacitors (Qualification approval and capability approval) |
| EN 60835-1-1:1992 | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 1: General |
| EN 12405 : 2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| EN 61747-5:1998 | Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods |
| EN 129000:1993/A1:1995 | GENERIC SPECIFICATION - FIXED RF WOUND INDUCTORS |
| EN 61011:1992/A11:1996 | ELECTRIC FENCE ENERGIZERS - SAFETY REQUIREMENTS FOR MAINS-OPERATED ELECTRIC FENCE ENERGIZERS |
| EN 62326-4-1:1997 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability Detail Specification - Performance levels A, B and C |
| EN 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| EN 61189-1 : 97 AMD 1 2001 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY |
| EN 60169-21:1997 | Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impendance 50 ohms (types SC-A and SC-B) |
| EN 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| VDS 2358 : 2009 | |
| EN 181000:1994 | Generic Specification: Fibre optic branching devices |
| EN 180000:1995 | Generic specification: Fibre optic attenuators |
| EN 117000:1991 | Generic Specification: Solid state all-or-nothing relays of assessed quality - Generic data and methods of test |
| EN 168000 : 1993 AMD 2 1998 | GENERIC SPECIFICATION - QUARTZ CRYSTAL UNITS |
| PREN 54-5 : DRAFT 2011 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS |
| 00/247278 DC : DRAFT DEC 2000 | |
| 08/30195238 DC : 0 | |
| BS EN 60747-5-2:2001 | Discrete semiconductor devices and integrated circuits. Optoelectronic devices Essential ratings and characteristics |
| BS 7825-3.5:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties |
| 03/101947 DC : DRAFT FEB 2003 | IEC 60939-1 ED.2.0 - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| BS EN 169000:1993 | Harmonized system of quality assessment for electronic components. Generic specification. Quartz crystal controlled oscillators |
| 03/114763 DC : DRAFT SEP 2003 | EN 54-18 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 18: REQUIREMENTS AND TEST METHODS FOR INPUT/OUTPUT DEVICES FOR USE ON THE TRANSMISSION PATHS OF FIRE DETECTION AND FIRE ALARM SYSTEMS |
| I.S. EN 12405:2002 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| 04/30104415 DC : DRAFT AUG 2004 | EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
| BS EN 60169-21:1997 | Radio-frequency connectors Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling. Characteristic impedance 50 ohms (types SC-A and SC-B) |
| 03/103741 DC : DRAFT FEB 2003 | IEC 61338-1 ED.1 - WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| BS EN 60252:1994 | A.C. motor capacitors |
| I.S. EN 61193-3:2013 | QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV)) |
| BS EN 61881:2000 | Railway applications. Rolling stock equipment. Capacitors for power electronics |
| 01/714407 DC : DRAFT OCT 2001 | ISO/DIS 16750-4 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 4: CLIMATIC LOADS |
| I.S. EN 61249-8-7:1999 | MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON-CONDUCTIVE FILMS AND COATINGS - SECTION 7: MARKING LEGEND INKS |
| OIML R 125 : 1998 | MEASURING SYSTEMS FOR THE MASS OF LIQUIDS IN TANKS |
| 02/211631 DC : 0 | IEC 60747-5-5 ED.1.0 - SEMICONDUCTOR DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS, OPTOCOUPLERS |
| CEI EN 61851-22 : 2003 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: AC ELECTRIC VEHICLE CHARGING STATION |
| BS EN 60835-1-1:1994 | Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements common to terrestrial radio-relay systems and satellite earth stations General |
| 05/30134428 DC : DRAFT JUN 2005 | |
| BS EN 181000:1995 | Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices |
| CSA E60127.6 : 2003 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| CAN/CSA-E60127-6-03 (R2017) | Miniature Fuses - Part 6: Fuse-Holders for Miniature Cartridge Fuse-Links (Adopted CEI/IEC 127-6:1994, first edition, 1994-04, including Amendment 1:1996, with Canadian deviations) | Coupe-circuit miniatures - Partie 6: Ensembles-porteurs pour cartouches de coupe-circuit miniatures (norme CEI/IEC 127-6:1994 adoptée, première édition, 1994-04, y compris l\'Amendement 1:1996, avec exigences propres au Canada) |
| CEI EN 60077-1 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| ISO 3930:2000 | Instruments for measuring vehicle exhaust emissions |
| BS EN 138000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: fixed inductors for electromagnetic interference suppression (inductors for which safety tests are required) |
| BS ISO 15003:2006 | Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions |
| I.S. EN 16602-70-10:2015 | SPACE PRODUCT ASSURANCE - QUALIFICATION OF PRINTED CIRCUIT BOARDS |
| I.S. EN 60835-1-1:1993 | METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - SECTION ONE: GENERAL |
| BS EN 54-7:2001 | Fire detection and fire alarm systems Smoke detectors. Point detectors using scattered light, transmitted light or ionization |
| I.S. EN 61249-5-4:1999 | MATERIALS FOR INTERCONNECTION STRUCTURES - PART 5: SECTIONAL SPECIFICATION SET FOR CONDUCTIVE FOILS AND FILMS WITH OR WITHOUT COATINGS - SECTION 4: CONDUCTIVE INKS |
| DIN EN 54-7:2015-07 (Draft) | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
| NF EN 61851-22 : 2002 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 22: A.C. ELECTRIC VEHICLE CHARGING STATION |
| NF EN 50132-4-1 : 2002 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS |
| I.S. EN 60368-1:2000 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61747-5:1999 | LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS |
| IEC 61261-1:1994 | Piezoelectric ceramic filters for use in electronic equipment - A specification in the IEC quality assessment system for electronic components (IECQ) - Part 1: Generic specification - Qualification approval |
| BS EN 29104:1993 | Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids |
| IEC 60749:1996+AMD1:2000+AMD2:2001 CSV | Semiconductor devices - Mechanical and climatic test methods |
| VDS 2116 : 2008 | JUNCTION BOXES - REQUIREMENTS |
| DIN EN 1760-1:1997-09 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN 12405:2003-10 | GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
| DIN EN 1760-2:2001-07 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN 61270-1 : 1997 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| VDE 0560-800 : 1998 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| BS 2011-2.1T:1981 | Environmental testing. Tests Test T. Soldering |
| DIN EN 137000 : 1998-03 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| VDE 0557-1 : 2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS |
| DIN EN 60938-1 : 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| BS 2011-2.1Kb:1987 | Environmental testing. Tests Test Kb. Salt mist, cyclic (sodium chloride solution) |
| VDE 0560-22 : 1997 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| BS CECC 50000:1987 | Harmonized system of quality assessment for electronic components. Generic specification: discrete semiconductor devices |
| BS CECC17000(1992) : 1992 AMD 9626 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION - SOLID STATE ALL OR NOTHING RELAYS - GENERIC DATA AND METHODS OF TEST |
| VDE 0435-140 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION |
| PREN 50290-4-1 : DRAFT 2013 | COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| BS CECC 64000:1990 | Harmonized system of quality assessment for electronic components: generic specification: film resistor networks |
| ISO 11614:1999 | Reciprocating internal combustion compression-ignition engines Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas |
| 11/30241337 DC : DRAFT JAN 2011 | BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| 07/30162213 DC : 0 | BS EN 60747-15 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 15: ISOLATED POWER SEMICONDUCTOR DEVICES |
| BS EN 61189-1:1997 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies General test methods and methodology |
| BS IEC 60747-5.2 : 97 AMD 13433 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS |
| 11/30252930 DC : 0 | BS EN 60747-5-7 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-7: PHOTODIODES AND PHOTOTRANSISTORS |
| 97/231700 DC : DRAFT DEC 1997 | IEC 60115-1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 62326-4-1:1997 | Printed boards. Rigid multilayer printed boards with interlayer connections. Sectional specification Capability detail specification. Performance levels, A, B and C |
| ISO 15003:2006 | Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions |
| 11/30205538 DC : 0 | BS EN 54-5 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 5: HEAT DETECTORS - POINT DETECTORS |
| BS EN 140000:1995 | Harmonized system of quality assessment for electronic components. Generic specification: fixed resistors |
| BS EN 61851-22:2002 | Electric vehicle conductive charging system A.C. electric vehicle charging station |
| BS EN 60512-11-3:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11c. Damp heat, steady state |
| BS 123400-003:2001 | System of quality assessment. Capability detail specification. Flexible single-sided and double-sided printed boards without through-connections |
| BS 123700-003:2001 | System of quality assessment. Capability detail specification. Flex-rigid double-sided printed boards with through-connections |
| BS EN 61011:1993 | Electric fence energizers. Safety requirements for mains-operated electric fence energizers |
| BS EN 62326-4:1997 | Printed boards Rigid multilayer printed boards with interlayer connections. Sectional specification |
| CEI EN 60368-1 : 2006 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| OIML R 129 : 2000 | MULTI-DIMENSIONAL MEASURING INSTRUMENTS |
| BS EN 120000:1996 | Harmonized system of quality assessment for electronic components. General specification: semiconductor optoelectronic and liquid crystal devices |
| BS QC 763000(1990) : AMD 6754 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. FILM AND HYBRID FILM INTEGRATED CIRCUITS. GENERIC SPECIFICATION |
| ISA S82.01 : 1994 | ELECTRICAL AND ELECTRONIC TEST, MEASURING, CONTROLLING AND RELATED EQUIPMENT - GENERAL REQUIREMENTS |
| 10/30234803 DC : 0 | BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| BS EN 168000:1996 | Harmonized system of quality assessment for electronic components. Generic specification: quartz crystal units |
| IEC 60326-9:1991 | Printed boards - Part 9: Specification for flexible multilayer printed boards with through connections |
| BS EN 61193-3:2013 | Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| CSA E691 : 0 | THERMAL LINKS - REQUIREMENTS AND APPLICATION GUIDE |
| BS EN 60368-1:2000 | Piezoelectric filters Generic specification |
| CSA E60127.6 : 2003 : R2012 | MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE CARTRIDGE FUSE-LINKS |
| BS EN 61243-5:2001 | Live working. Voltage detectors Voltage detecting systems (VDS) |
| NF EN 60938-1 : 2008 AMD 1 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| IEC 62326-4:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification |
| BS EN 50136-2-1:1998 | Alarm systems. Alarm transmission systems and equipment General requirements for alarm transmission equipment |
| IEC 61338-1-2:1998 | Waveguide type dielectric resonators - Part 1-2: General information and test conditions - Test conditions |
| GOST R IEC 60252-1 : 2005 | AC MOTOR CAPACITORS - PART 1: GENERAL. PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| BS EN 167000:1993 | Harmonized system of quality assessment for electronic components. Generic specification: piezoelectric filters |
| I.S. EN 61007:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - MEASURING METHODS AND TEST PROCEDURES |
| CEI EN 60068-2-52 : 1997 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION) |
| CEI EN 60068-2-48 : 2000 | ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON THE APPLICATION OF THE TESTS OF IEC PUBLICATION 60068 TO SIMULATE THE EFFECTS OF STORAGE |
| CEI EN 60122-1 : 2004 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| I.S. EN 138000:1998 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) (GENERIC SPECIFICATION) |
| I.S. EN 54-7:2000 | COMPONENTS OF AUTOMATIC FIRE DETECTION SYSTEMS - POINT-TYPE SMOKE DETECTORS - DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
| I.S. EN 133000:1998 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION) |
| NF EN 60068 2-48 : 2000 | ENVIRONMENTAL TESTING - PART 2: TESTS - GUIDANCE ON THE APPLICATION OF THE TEST OF IEC 60068 TO SIMULATE THE EFFECTS OF STORAGE |
| CEI EN 60747-5-2 : 2002 | DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS |
| NFS 61 023 : 2004 XP | FIRE DETECTION SYSTEMS (FDS) USING RADIO LINKS |
| IEC 60748-23-1:2002 | Semiconductor devices - Integrated circuits - Part 23-1: Hybrid integrated circuits and film structures - Manufacturing line certification - Generic specification |
| IEC 62326-4-1:1996 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability detail specification - Performance levels A, B and C |
| IEC 62103:2003 | Electronic equipment for use in power installations |
| I.S. EN 60938-1:1999 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| IEC 60780:1998 | Nuclear power plants - Electrical equipment of the safety system - Qualification |
| I.S. EN 61189-1:1999 | TEST METHODS FOR ELECTRICAL MATERIALS, INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 1: GENERAL TEST METHODS AND METHODOLOGY |
| I.S. EN 61204:1996 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS |
| UNE-EN 50491-2:2011 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions |
| IEC 60368-1:2000+AMD1:2004 CSV | Piezoelectric filters of assessed quality - Part 1: Genericspecification |
| IEC 61249-8-7:1996 | Materials for interconnection structures - Part 8: Sectional specification set for non-conductive films and coatings - Section 7: Marking legend inks |
| IEC 61189-1:1997+AMD1:2001 CSV | Test methods for electrical materials, interconnection structures and assemblies - Part 1: General test methods and methodology |
| EN 61007:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| EN 50136-2-1 : 98 AMD 1 2001 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR ALARM TRANSMISSION EQUIPMENT |
| UNI EN 1760-2 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| EN 60249-1 : 1993 COR 1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| UNI EN 1760-1 : 2009 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| NF EN 54-7 : 2001 AMD 2 2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
| VDE 0882 : 1996 | SAFETY REQUIREMENTS FOR ELECTRONIC FLASH APPARATUS FOR PHOTOGRAPHIC PURPOSES |
| CEI EN 61243-5 : 2002 | LIVE WORKING - VOLTAGE DETECTORS - PART 5: VOLTAGE DETECTING SYSTEMS (VDS) |
| 03/109829 DC : DRAFT JUNE 2003 | IEC 60086-3 - PRIMARY BATTERIES - PART 3: WATCH BATTERIES |
| 05/30136363 DC : DRAFT JUL 2005 | IEC 60255-6 ED 3 - ELECTRICAL RELAYS - PART 6: GENERAL REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT |
| 05/30137416 DC : 0 | |
| BS EN 61249-8-8:1997 | Materials for interconnection structures. Sectional specification set for non-conductive films and coatings Temporary polymer coatings |
| CEI 45-60 : 2009 | NUCLEAR POWER PLANTS - ELECTRICAL EQUIPMENT OF THE SAFETY SYSTEM - QUALIFICATION |
| ISO 10599-2:1997 | Car radios — Coaxial aerial connectors — Part 2: Characteristic values, performance requirements and tests |
| I.S. EN 143000:1994 | THERMISTORS (GENERIC SPECIFICATION) |
| BS EN 61270-1:1998 | Capacitors for microwave ovens General |
| 03/103740 DC : DRAFT FEB 2003 | IEC 61337-1 ED.1 - FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| CEI EN 60169-21 : 1998 | RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B) |
| 11/30252977 DC : 0 | BS EN 61747-10-2 - LIQUID CRYSTAL DISPLAY DEVICES - PART 10-2: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS - ENVIRONMENTAL AND ENDURANCE |
| BS 123500-003:2001 | System of quality assessment. Capability detail specification. Flexible Single-sided and double-sided printed boards with through-connections |
| BS 123800-003:2001 | System of quality assessment. Capability detail specification. Flexible multilayer printed boards with through-connections |
| 12/30259014 DC : 0 | BS EN 60127-6 - MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS |
| CSA CEI/IEC 61000.4.15 : 2003 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4: TESTING AND MEASUREMENT TECHNIQUES - SECTION 15: FLICKERMETER - FUNCTIONAL AND DESIGN SPECIFICATIONS |
| 00/201245 DC : DRAFT FEB 2000 | IEC 62029-1 - COAXIAL CABLES USED IN CABLED DISTRIBUTION NETWORKS - PART 1: GENERIC SPECIFICATION AND TEST METHODS |
| 05/30139105 DC : DRAFT SEP 2005 | IEC 61800-5-1 ED 2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
| IEC 61851-22:2001 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| CEI EN 60966-1 : 2001 | RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 61007:1997 | Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures |
| NF EN 61291 5-2 : 2003 | OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS |
| NF EN 62326 4-1 : 1998 | PRINTED BOARDS - PART 4: RIGID MULTILAYER PRINTED BOARDS WITH INTERLAYER CONNECTIONS - SECTIONAL SPECIFICATION - SECTION 1: CAPABILITY DETAIL SPECIFICATION PERFORMANCE LEVELS A, B AND C |
| BS EN 61248-1:1997 | Transformers and inductors for use in electronic and telecommunication equipment Generic specification |
| DIN IEC 60068-2-20:1991-04 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST T: SOLDERING |
| BS IEC 60748-23-1:2002 | Semiconductor devices. Integrated circuits. Hybrid integrated circuits and film structures. Manufacturing line certification Generic specification |
| BS EN 165000-1:1996 | Film and hybrid integrated circuits Generic specification. Capability approval procedure |
| 08/30193715 DC : 0 | BS EN 62246-1 ED.2 - REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| BS EN 123400:1992 | Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections |
| BS EN 130000:1994 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| BS EN 60122-1 : 2002 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| 04/30114936 DC : DRAFT JUN 2004 | EN 50439 - RAILWAY APPLICATIONS - RELIABILITY TESTS FOR HIGH POWER SEMICONDUCTORS DEVICES - PART 1: STANDARD BASE-PLATE MODULES |
| BS EN 180000:1996 | Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators |
| 06/30117299 DC : 0 | BS EN 54-15 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 15: POINT DETECTORS USING A COMBINATION OF DETECTED FIRE PHENOMENA |
| 01/206938 DC : DRAFT OCT 2001 | IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT |
| PD 6521:1988 | Summaries of test methods for environmental testing of electrotechnical products |
| BS EN 60068-2-48:2000 | Environmental testing. Test methods Guidance on the application of the tests of IEC 60068 to simulate the effects of storage |
| BS EN 50132-2-1:1998 | Alarm systems. CCTV surveillance systems for use in security applications Black and white cameras |
| BS 123600-003:2001 | System of quality assessment. Capability detail specification. Flex-rigid multilayer printed boards with through-connections |
| DIN EN 60252 : 1994 | CAPACITORS - MOTOR CAPACITORS |
| NF ISO 3930 : 2001 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS |
| I.S. EN 165000-1:1998 | FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION CAPABILITY APPROVAL PROCEDURE |
| I.S. EN 134000:1994 | GENERIC SPECIFICATION: VARIABLE CAPACITORS (QUALIFICATION APPROVAL AND CAPABILITY APPROVAL) |
| IEC 61178-1:1993 | Quartz crystal units - A specification in the IEC Quality Assessment System for Electronic Components (IECQ) - Part 1: Generic specification |
| I.S. CECC 33000:1994 | PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (GENERIC SPECIFICATION) |
| GOST EN 1760-1 : 2004 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| IEC 61810-5:1998 | Electromechanical non-specified time all-or-nothing relays - Part 5: Insulation coordination |
| IEC 61337-1-2:1999 | Filters using waveguide type dielectric resonators - Part 1-2: Test conditions |
| IEC 60326-10:1991 | Printed boards - Part 10: Specification for flex-rigid double-sided printed boards with through connections |
| IEC 60326-11:1991 | Printed boards - Part 11: Specification for flex-rigid multilayer printed boards with through connections |
| IEC 61007:1994 | Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures |
| EN 60938-1:1999/A1:2007 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| IEC 60938-1:1999+AMD1:2006 CSV | Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification |
| BS 123200-003:2001 | System of quality assessment. Capability detail specification. Rigid double-sided printed boards with plated-through holes |
| IEC 61243-5:1997 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| BS 123300-003:2001 | System of quality assessment. Capability detail specification. Rigid multilayer printed boards |
| 00/246907 DC : DRAFT DEC 2000 | BS EN 61980-1 - ELECTRICAL - ELECTRIC VEHICLE INDUCTIVE CHARGING SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| IEC 61270-1:1996 | Capacitors for microwave ovens - Part 1: General |
| IEC 60512-11-3:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state |
| IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| IEC 61747-1:1998+AMD1:2003 CSV | Liquid crystal and solid-state display devices - Part 1: Generic specification |
| IEC 61193-3:2013 | Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing |
| BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
| IEC 61248-1:1996 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
| ISO 13137:2013 | Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and test methods |
| BS EN 1760-2 : 2001 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| BS EN 54-11:2001 | Fire detection and fire alarm systems Manual call points |
| BS EN 12405:2002 | Gas meters. Gas-volume electronic conversion devices |
| BS EN 50491-2 : 2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS |
| BS 7822-1:1995 | Insulation coordination for equipment within low-voltage systems Principles, requirements and tests |
| BS EN 1760-1 : 1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| 98/203095 DC : DRAFT JULY 1998 | PRENV 50275-2-3 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 2-3: D.C. CHARGING STATION |
| IEC 60747-5-2:1997+AMD1:2002 CSV | Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics |
| EN 62326-4:1997 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification |
| EN 180000 : 1995 | GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 16602-70-10:2015 | Space product assurance - Qualification of printed circuit boards |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 29104:1993 | Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991) |
| I.S. EN 60491:1996 | SAFETY REQUIREMENTS FOR ELECTRONIC FLASH APPARATUS FOR PHOTOGRAPHIC PURPOSES |
| ETR 344 : 20001 | TERMINAL EQUIPMENT (TE) - THE TECHNICAL FEASIBILITY OF A HARMONIZED PLUG AND SOCKET STANDARD |
| DIN 47608-2:1997-10 | TERMINAL STRIPS WITH INSULATION DISPLACEMENT CONTACTS FOR TELECOMMUNICATION SYSTEMS; REQUIREMENTS, TESTS |
| I.S. EN 50491-2:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS |
| CEI EN 61270-1 : 1997 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| BS IEC 60780:1998 | Nuclear power plants. Electrical equipment of the safety system. Qualification |
| NF EN 50136-2-1 : 98 AMD 1 2002 | ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 2-1: GENERAL REQUIREMENTS FOR EQUIPMENT USED IN SYSTEMS USING DEDICATED ALARM PATHS |
| BS EN 50132-4-1:2001 | Alarm systems. CCTV surveillance systems for use in security applications Black and white monitors |
| CEI EN 138000 : 1996 | GENERIC SPECIFICATION: FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| 08/30179134 DC : DRAFT MAR 2008 | BS EN 60143-4 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 4: THYRISTOR CONTROLLED SERIES CAPACITORS |
| 11/30245197 DC : 0 | BS EN 60143-2 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENTS FOR SERIES CAPACITOR BANKS |
| 13/30264596 DC : 0 | BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER |
| 16/30337159 DC : 0 | BS EN ISO 9455-15 - SOFT SOLDERING FLUXES - TEST METHODS - PART 15: COPPER CORROSION TEST |
| 13/30291609 DC : 0 | BS EN 60966-1 - RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND TEST METHODS |
| 02/206181 DC : DRAFT MAY 2002 | IEC 61019-1. ED.1 - SURFACE ACOUSTIC WAVE RESONATORS (SAW) OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| 13/30264600 DC : 0 | BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID |
| DIN EN 61810-5 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - PART 5: INSULATION COORDINATION |
| BS EN 61810-5:1999 | Electromechanical non-specified time all-or-nothing relays Insulation coordination |
| I.S. EN 60169-21:1999 | RADIO-FREQUENCY CONNECTORS - PART 21: TWO TYPES OF RADIO-FREQUENCY CONNECTORS WITH INNER DIAMETER OF OUTER CONDUCTOR 9,5 MM (0,374 IN) WITH DIFFERENT VERSIONS OF SCREW COUPLING - CHARACTERISTIC IMPEDANCE 50 OHMS (TYPES SC-A AND SC-B) |
| I.S. EN 60249-1:1994 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| 13/30268917 DC : 0 | BS EN 50290-4-1 ED.2 PREN 50290-4-1 ED.2 - COMMUNICATION CABLES - PART 4-1: GENERAL CONSIDERATIONS FOR THE USE OF CABLES - ENVIRONMENTAL CONDITIONS AND SAFETY ASPECTS |
| BS EN 61248-7:1998 | Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure |
| CEI EN 61249-8-7 : 1997 | MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON-CONDUCTIVE FILMS AND COATINGS - SECTION 7: MARKING LEGEND INKS |
| BS 2011-4.2:1984 | Environmental testing. Miscellaneous Guidance on the application of the tests of BS 2011 to simulate the effects of storage |
| 01/203790 DC : DRAFT JUNE 2001 | IEC 62093 ED.1 - BALANCE-OF-SYSTEM COMPONENTS FOR PHOTO-VOLTAIC SYSTEMS - DESIGN QUALIFICATION AND TYPE APPROVAL |
| 04/30115471 DC : DRAFT JUL 2004 | ISO 7240-21 - FIRE DETECTION AND ALARM SYSTEMS - PART 21: ROUTING EQUIPMENT |
| DIN EN 61881 : 2000 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS |
| I.S. EN 181000:1994 | FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION) |
| BS EN 170000:1999 | Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators |
| NF EN 61249 8-7 : 1997 | MATERIALS FOR INTERCONNECTION STRUCTURES - PART 8: SECTIONAL SPECIFICATION SET FOR NON CONDUCTIVE FILMS AND COATINGS - SECTION 7: MARKING LEGEND LINKS |
| I.S. EN 60122-1:2002 AMD 1 2018 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| I.S. EN 61270-1:1999 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| NF EN 50132-2-1 : 1997 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 2-1: BLACK AND WHITE CAMERAS |
| NF EN 60835 1-1 : 1993 | METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - SECTION ONE: GENERAL |
| ONORM EN 54-7 : 2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
| BS 2011-2.1Cb:1990 | Environmental testing. Tests Test Cb. Damp heat, steady state, primarily for equipment |
| BIS IS 15934-5 : 2011 | LIQUID CRYSTAL AND SOLID-STATE DISPLAY DEVICES - PART 5: ENVIRONMENTAL, ENDURANCE AND MECHANICAL TEST METHODS |
| I.S. EN 60512-11-3:2002 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS - TEST 11C: DAMP HEAT, STEADY STATE |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| IEC 61019-1-2:1993 | Surface acoustic wave (SAW) resonators - Part 1: General information, standard values and test conditions - Section 2: Test conditions |
| I.S. CECC 86000:1993 | CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION) |
| I.S. EN 116000-3:1998 | GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES |
| IEC 61204:1993+AMD1:2001 CSV | Low-voltage power supply devices, d.c. output - Performance characteristics |
| DIN EN 1760-2:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE EDGES AND PRESSURE SENSITIVE BARS |
| DIN EN 1760-1:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| BS EN 54-4:1998 | Fire detection and fire alarm systems Power supply equipment |
| IEC 61881:1999 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| BS EN 50090-2-2 : 1997 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| EN 61248-7:1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure |
| EN 61243-5:2001 | Live working - Voltage detectors - Part 5: Voltage detecting systems (VDS) |
| EN 61810-5 : 1998 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - INSULATION COORDINATION |
| EN 61881:1999 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| EN 61270-1:1996 | Capacitors for microwave ovens - Part 1: General |
| EN 119000 : 1996 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DRY AND MERCURY WETTED REED CONTACT UNITS |
| EN 60252 : 94 AC 94 | A.C. MOTOR CAPACITORS |
| EN 61248-1 : 1997 | Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification |
| EN 60122-1:2002/A1:2018 | QUARTZ CRYSTAL UNITS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION (IEC 60122-1:2002/A1:2017) |
| EN 50090-2-2:1996/A2:2007 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-2: SYSTEM OVERVIEW - GENERAL TECHNICAL REQUIREMENTS |
| EN 60491 : 1995 | SAFETY REQUIREMENTS FOR ELECTRONIC FLASH APPARATUS FOR PHOTOGRAPHIC PURPOSES |
| EN 60368-1:2000/A1:2004 | PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION |
| EN 50132-4-1 : 2001 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 4-1: BLACK AND WHITE MONITORS |
| EN 165000-1:1996 | Film and hybrid integrated circuits - Part 1: Generic specification - Capability approval procedure |
| EN 60512-11-3:2002 | Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state |
| EN 143000 : 1991 | THERMISTORS (GENERIC SPECIFICATION) |
| EN 50491-2 : 2010 AMD 1 2015 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS |
| EN 116000-3 : 1996 | GENERIC SPECIFICATION: ELECTROMECHANICAL ALL-OR-NOTHING RELAYS - PART 3: TEST AND MEASUREMENT PROCEDURES |
| EN 137000:1995 | Generic Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors |
| EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 50132-2-1 : 1997 | ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - BLACK AND WHITE CAMERAS |
| EN 61204:1995/A1:2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001) |
| DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| EN 60749 : 99 AMD 2 2001 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS |
| EN 140000 : 1993 | GENERIC SPECIFICATION: FIXED RESISTORS |
| BS 415(1998) : 1998 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
| CSA E1048 : 1998 | CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
| BS 4671(1987) : AMD 7870 | METHODS FOR EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS |
| BS CECC 30000:1992 | Harmonized system of quality assessment for electronic components. Generic specification: fixed capacitors |
| BS CECC 30000:1984 | Harmonized system of quality assessment for electronic components: generic specification: fixed capacitors |
| VDS 2119 : 2003 | ANCILLARY CONTROL EQUIPMENT (ACE) - REQUIREMENTS |
| VDS 2117 : 2002 | INFRARED LIGHT BEAMS - REQUIREMENTS |
| BS 2011-2.2C&D(1990) : 1990 | ENVIRONMENTAL TESTING - TESTS - TESTS C & D - GUIDANCE FOR DAMP HEAT TESTS |
| BS 2782-5.551A(1988) : 1988 AMD 10820 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| IEC 60068-2-28:1990 | Environmental testing - Part 2: Tests. Guidance for damp heat tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.