I.S. EN ISO 80601-2-61:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
Hardcopy , PDF
16-02-2019
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
201.1 Scope, object and related standards
201.2 Normative reference
201.3 Terms and definitions
201.4 General requirements
201.5 General requirements for testing of ME
EQUIPMENT
201.6 Classification of ME EQUIPMENT and
ME SYSTEMS
201.7 ME EQUIPMENT identification, marking
and documents
201.8 Protection against electrical HAZARDS from
ME EQUIPMENT
201.9 Protection against mechanical HAZARDS of
ME EQUIPMENT and ME SYSTEMS
201.10 Protection against unwanted and excessive
radiation HAZARDS
201.11 Protection against excessive temperatures and
other HAZARDS
201.12 ACCURACY of controls and instruments and
protection against hazardous outputs
201.13 HAZARDOUS SITUATIONS and fault conditions
201.14 PROGRAMMABLE ELECTRICAL MEDICAL
SYSTEMS (PEMS)
201.15 Construction of ME EQUIPMENT
201.16 ME SYSTEMS
201.17 Electromagnetic compatibility of ME EQUIPMENT
and ME SYSTEMS
201.101 PULSE OXIMETER PROBES and PROBE
CABLE EXTENDERS
201.102 Saturation pulse INFORMATION SIGNAL
201.103 SIGNAL INPUT/OUTPUT PART
202 Medical electrical equipment - Part 1-2: General
requirements for safety - Collateral standard:
Electromagnetic compatibility - Requirements
and tests
208 Medical electrical equipment - Part 1-8:
General requirements for safety - Collateral
Standard: General requirements, tests and
guidance for alarm systems in medical electrical
equipment and medical electrical systems
Annex C (informative) - Guide to marking and labelling
requirements for ME EQUIPMENT and ME
SYSTEMS
Annex D (informative) - Symbols on marking
Annex AA (informative) - Particular guidance and rationale
Annex BB (informative) - Skin temperature at the PULSE
OXIMETER PROBE
Annex CC (informative) - Determination of ACCURACY
Annex DD (informative) - Calibration standards
Annex EE (informative) - Guideline for evaluating and
documenting S[p]O[2] ACCURACY in human
subjects
Annex FF (informative) - Simulators, calibrators and
FUNCTIONAL TESTERS for PULSE
OXIMETER EQUIPMENT
Annex GG (informative) - Concepts of ME EQUIPMENT
response time
Annex HH (informative) - Reference to the essential principles
of safety and performance of medical devices
in accordance with ISO/TR 16142
Bibliography
Alphabetized index of defined terms used in this standard
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 93/42/EEC
Pertains to the basic safety and essential performance of pulse oximeter equipment intended for use on humans, hereafter referred to as ME equipment.
| DevelopmentNote |
Supersedes I.S. EN ISO 9919. (05/2011)
|
| DocumentType |
Standard
|
| Pages |
101
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 80601-2-61:2011 | Identical |
| EN ISO 80601-2-61:2011 | Identical |
| IEC TR 60825-9:1999 | Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| CLSI C46 A2 : 2ED 2009 | BLOOD GAS AND PH ANALYSIS AND RELATED MEASUREMENTS |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| IEC TR 62471-2:2009 | Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| IEC 60721-3-7:1995+AMD1:1996 CSV | Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use |
| IEC 60601-1-10:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| IEC 60601-1-8:2006+AMD1:2012 CSV | Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems |
| CLSI C25 A : 1997 | FRACTIONAL OXYHEMAGLOBIN, OXYGEN CONTENT AND SATURATION, AND RELATED QUANTITIES IN BLOOD: TERMINOLOGY, MEASUREMENT, AND REPORTING |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO/TR 16142:2006 | Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| IEC TR 60878:2015 | Graphical symbols for electrical equipment in medical practice |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ASTM F 2761 : 2009 : R2013 | Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| IEC TR 60721-4-7:2001+AMD1:2003 CSV | Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use |
| ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| IEC 60601-1-9:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-9: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.