I.S. EN ISO 7539-11:2014
Current
The latest, up-to-date edition.
CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING (ISO 7539-11:2013)
Hardcopy , PDF
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Factors to be considered in hydrogen embrittlement
and hydrogen-assisted cracking testing
4 Selection of test method
5 Post-test evaluation
Bibliography
Provides guidance on the key features that should be accounted for in designing and conducting tests to evaluate the resistance of a metal or its alloy to hydrogen embrittlement and hydrogen-assisted cracking.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| ISO 7539-11:2013 | Identical |
| EN ISO 7539-11:2014 | Identical |
| BS 7448-1:1991 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
| ISO 14372:2011 | Welding consumables Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen |
| ASTM A 1032 : 2015 : REDLINE | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe |
| ASTM G 146 : 2001 | Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ISO 10587:2000 | Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method |
| ISO 12683:2004 | Mechanically deposited coatings of zinc Specification and test methods |
| ISO 15330:1999 | Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
| NACE TM 01 98 : 2016 | SLOW STRAIN RATE TEST METHOD FOR SCREENING CORROSION-RESISTANT ALLOYS FOR STRESS CORROSION CRACKING IN SOUR OILFIELD SERVICE |
| ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
| ISO/TR 17844:2004 | Welding Comparison of standardised methods for the avoidance of cold cracks |
| ISO 11782-1:1998 | Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing |
| ISO 7539-9:2003 | Corrosion of metals and alloys Stress corrosion testing Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement |
| ISO 7539-6:2011 | Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement |
| ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 7539-7:2005 | Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing |
| ISO 17081:2014 | Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ASTM F 2078 : 2015 : REDLINE | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
| ISO 2626:1973 | Copper — Hydrogen embrittlement test |
| ASTM F 1624 : 2012-11 | TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE |
| ASTM F 326 : 1996 | Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes |
| ISO 11782-2:1998 | Corrosion of metals and alloys Corrosion fatigue testing Part 2: Crack propagation testing using precracked specimens |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.