I.S. EN ISO 4254-1:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AGRICULTURAL MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS (ISO 4254-1:2013)
Hardcopy , PDF
English
01-01-2015
20-01-2022
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or measures applicable
to all machines
5 Safety requirements and/or measures - Self-propelled
ride-on machines
6 Safety requirements and/or measures - Mounted,
semi-mounted and trailed machines
7 Verification of safety requirements or protective measures
8 Information for use
Annex A (informative) - List of significant hazards
Annex B (normative) - Noise test code (engineering method
grade 2)
Annex C (normative) - Strength tests
Annex D (informative) - Stability of tractor machine
combinations
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive EU Directive
2006/42/EC
Describes the safety requirements and the means of their verification for the design and construction of self-propelled ride-on machines, mounted, semi-mounted and trailed machines used in agriculture in order to deal with the hazards which are typical for most of the machines.
| DevelopmentNote |
Supersedes I.S. EN 1553. (03/2006)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NS EN ISO 4254-1 : 2015 | Identical |
| DIN EN ISO 4254-1:2016-09 | Identical |
| NBN EN ISO 4254-1 : 2013 | Identical |
| BS EN ISO 4254-1:2015 | Identical |
| NEN EN ISO 4254-1 : 2015 | Identical |
| EN ISO 4254-1:2015 | Identical |
| NF EN ISO 4254-1 : 2015 | Identical |
| ISO 4254-1:2013 | Identical |
| ONORM EN ISO 4254-1 : 2016 | Identical |
| UNE-EN ISO 4254-1:2016 | Identical |
| ISO 730:2009 | Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 |
| ISO 3744:2010 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane |
| ISO/TR 11688-1:1995 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning |
| ISO 3776-3:2009 | Tractors and machinery for agriculture — Seat belts — Part 3: Requirements for assemblies |
| ISO 4253:1993 | Agricultural tractors — Operator's seating accommodation — Dimensions |
| ISO 3776-1:2006 | Tractors and machinery for agriculture — Seat belts — Part 1: Anchorage location requirements |
| ISO 3767-2:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry — Seat index point |
| ISO 4413:2010 | Hydraulic fluid power — General rules and safety requirements for systems and their components |
| ISO 25119-2:2010 | Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 2: Concept phase |
| ISO 25119-4:2010 | Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 4: Production, operation, modification and supporting processes |
| ISO 3776-2:2013 | Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements |
| ISO 3600:2015 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format |
| ISO 10975:2009 | Tractors and machinery for agriculture — Auto-guidance systems for operator-controlled tractors and self-propelled machines — Safety requirements |
| ISO 19472:2006 | Machinery for forestry — Winches — Dimensions, performance and safety |
| ISO 15077:2008 | Tractors and self-propelled machinery for agriculture — Operator controls — Actuating forces, displacement, location and method of operation |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| ISO 14982:1998 | Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria |
| ISO 5008:2002 | Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator |
| ISO 25119-1:2010 | Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 1: General principles for design and development |
| ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| ISO 13857:2008 | Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 4414:2010 | Pneumatic fluid power — General rules and safety requirements for systems and their components |
| ISO 25119-3:2010 | Tractors and machinery for agriculture and forestry — Safety-related parts of control systems — Part 3: Series development, hardware and software |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| ISO 2332:2009 | Agricultural tractors and machinery — Connection of implements via three-point linkage — Clearance zone around implement |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 2: Introduction to the physics of low-noise design |
| ISO 11201:2010 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| ISO 16231-1:2013 | Self-propelled agricultural machinery — Assessment of stability — Part 1: Principles |
| ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.