I.S. EN ISO 17945:2015
Current
The latest, up-to-date edition.
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Responsibilities
6 Factors contributing to SSC
7 Materials included in this International Standard
8 Hardness requirements
9 Procedure for the addition of new materials or processes
10 New restrictions and deleted materials
11 Qualification of unlisted alloys, conditions, and/or processes
for specific applications
12 Standard road map
13 Ferrous materials
14 Nonferrous materials
15 Fabrication requirements
16 Bolting
17 Plating, coatings, and diffusion processes
18 Special components
19 Valves
20 Compressors and pumps
Annex A (informative) - Sulfide species plot
Annex B (informative) - Background information on
hardness testing and requirements
Annex C (normative) - Welding procedure qualification
hardness survey layouts
Bibliography
Defines material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H[2]S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon.
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN ISO 17945:2015 | Identical |
| ISO 17945:2015 | Identical |
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ASTM A 833 : 2008 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
| ASTM A 995/A995M : 2013 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
| ASTM A 923 : 2014 : REDLINE | Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels |
| ASTM E 562 : 2011 : REDLINE | Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| SAE AMS 4779 : 2017 | NICKEL ALLOY, BRAZING FILLER METAL, 94NI - 3.5SI - 1.8B, 1800 DEGREES F (982 DEGREES C) SOLIDUS, 1950 DEGREES F (1066 DEGREES C) LIQUIDUS |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| SAE AMS2430T | SHOT PEENING |
| API 5L : 2012 | LINE PIPE |
| ASTM E 110 : 2014 : REDLINE | Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
| NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| NACE 8X294 : 2003 | REVIEW OF PUBLISHED LITERATURE ON WET H[2]S CRACKING OF STEELS THROUGH 1989 |
| DIN 50156-1:2007-07 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 1: TEST METHOD |
| BS 2HR 3:2010 | Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2) |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| NACE SP 02 96 : 2010 | DETECTION, REPAIR, AND MITIGATION OF CRACKING IN REFINERY EQUIPMENT IN WET H[2]S ENVIRONMENTS |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.