I.S. EN ISO 17776:2016
Current
The latest, up-to-date edition.
PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS (ISO 17776:2016)
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 Major accident hazard management overview
5 Management of major accident hazards in design
6 Screening and concept selection process
7 Concept definition and optimization
8 Detailed design and construction phase
9 Major accident hazard management in operation
Annex A (informative) - Example of a framework for
risk-related decision support
Annex B (informative) - Plan to manage major accident
hazards
Annex C (informative) - Major accident hazard management
identification and evaluation tools
Annex D (informative) - Strategy for managing major accident
hazards
Annex E (informative) - Barrier system performance standards
Annex F (informative) - HAZID guidewords
Bibliography
Gives processes for managing major accident (MA) hazards during the design of offshore oil and gas production installations and also provides requirements and guidance on the development of strategies both to prevent the occurrence of MAs and to limit the possible consequences.
| DocumentType |
Standard
|
| Pages |
114
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN ISO 17776 : 2016 | Identical |
| NF EN ISO 17776 : 2002 | Identical |
| DIN EN ISO 17776:2015-08 (Draft) | Identical |
| UNI EN ISO 17776 : 2003 | Identical |
| NEN EN ISO 17776 : 2016 | Identical |
| BS EN ISO 17776:2016 | Identical |
| EN ISO 17776:2016 | Identical |
| SN EN ISO 17776 : 2017 | Identical |
| ISO 17776:2016 | Identical |
| NBN EN ISO 17776 : 2002 | Identical |
| DIN EN ISO 17776:2003-09 | Identical |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO 9241-920:2009 | Ergonomics of human-system interaction — Part 920: Guidance on tactile and haptic interactions |
| IEC 62551:2012 | Analysis techniques for dependability - Petri net techniques |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| NORSOK R 002 : 2017 | LIFTING EQUIPMENT |
| ISO 7250:1996 | Basic human body measurements for technological design |
| ISO 9241-210:2010 | Ergonomics of human-system interaction Part 210: Human-centred design for interactive systems |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| ISO 9355-1:1999 | Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators |
| ISO 31000:2009 | Risk management Principles and guidelines |
| EEMUA 191 : 2013 | ALARM SYSTEMS - GUIDE TO DESIGN, MANAGEMENT AND PROCUREMENT |
| IEC 61078:2016 | Reliability block diagrams |
| IEC 61165:2006 | Application of Markov techniques |
| ISO 15544:2000 | Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| NORSOK S 001 : REV 4 | TECHNICAL SAFETY |
| ISO 10418:2003 | Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
| BS OHSAS 18002:2008 | Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007 |
| IEC 62502:2010 | Analysis techniques for dependability - Event tree analysis (ETA) |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| EEMUA 201 : 2010 | PROCESS PLANT CONTROL DESKS UTILISING HUMAN-COMPUTER INTERFACES - GUIDE TO DESIGN, OPERATIONAL AND HUMANCOMPUTER INTERFACE ISSUES |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO/TR 31004:2013 | Risk management — Guidance for the implementation of ISO 31000 |
| ISO/TR 12489:2013 | Petroleum, petrochemical and natural gas industries Reliability modelling and calculation of safety systems |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| ISO 20815:2008 | Petroleum, petrochemical and natural gas industries Production assurance and reliability management |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| NORSOK C 001 : REV 4 | LIVING QUARTERS AREA |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.