I.S. EN ISO 15027-2:2012
Current
The latest, up-to-date edition.
IMMERSION SUITS - PART 2: ABANDONMENT SUITS, REQUIREMENTS INCLUDING SAFETY (ISO 15027-2:2012)
Hardcopy , PDF
English
01-01-2012
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Marking
6 Information supplied by the manufacturer
7 Consumer information at point of sale
Annex A (informative) - Guidelines for manufacturers, users,
regulators and industrial inspectors about immersion
suits with respect to the application of thermal
protection times relevant to the ISO 15027 series
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 89/686/EEC
Bibliography
Describes performance and safety requirements for abandonment suits in emergency situations in work and leisure activities to protect the body of a user against the effects of cold water immersion, such as cold shock and hypothermia, including head, hand and feet protection.
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN ISO 15027-2 : 2012 | Identical |
| ISO 15027-2:2012 | Identical |
| UNE-EN ISO 15027-2:2013 | Identical |
| EN ISO 15027-2:2012 | Identical |
| NEN EN ISO 15027-2 : 2012 | Identical |
| UNI EN ISO 15027-2 : 2012 | Identical |
| NF EN ISO 15027-2 : 2013 | Identical |
| BS EN ISO 15027-2:2012 | Identical |
| DIN EN ISO 15027-2:2013-03 | Identical |
| NBN EN ISO 15027-2 : 2013 | Identical |
| SN EN ISO 15027-2 : 2013 | Identical |
| ISO 15027-3:2012 | Immersion suits Part 3: Test methods |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| ISO 12402-5:2006 | Personal flotation devices Part 5: Buoyancy aids (level 50) Safety requirements |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 12402-3:2006 | Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirements |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 12402-2:2006 | Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirements |
| ISO 105-E02:2013 | Textiles — Tests for colour fastness — Part E02: Colour fastness to sea water |
| ISO 12401:2009 | Small craft — Deck safety harness and safety line — Safety requirements and test methods |
| ISO 12402-8:2006 | Personal flotation devices Part 8: Accessories Safety requirements and test methods |
| ISO 7854:1995 | Rubber- or plastics-coated fabrics Determination of resistance to damage by flexing |
| ISO 12402-6:2006 | Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods |
| ISO 3801:1977 | Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area |
| ISO 12402-4:2006 | Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirements |
| ISO 12402-9:2006 | Personal flotation devices Part 9: Test methods |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| EN 340:2003 | Protective clothing - General requirements |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.