I.S. EN ISO 10472-6:2008
Current
The latest, up-to-date edition.
SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 6: IRONING AND FUSING PRESSES
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Definitions
4 Hazards
5 Safety requirements and/or measures for the hazards identified
in clause 4
5.1 General
5.2 Mechanical hazards
5.2.1 Closing and pressing of the head and buck of all presses
5.2.2 Operating mechanism of the head and buck of all presses
5.2.3 Falling of the head of scissor presses
5.3 Electrical hazards
5.4 Thermal hazards
5.4.1 Hot surfaces of all presses, covered and uncovered
5.4.2 Free steam affecting the operator (for scissor presses)
5.4.3 Radiated and convected heat affecting the operator
(for scissor presses)
5.5 Hazards generated by noise
5.6 Hazards caused by harmful fumes, for fusing presses
5.7 Hazards due to neglect of ergonomic principles
in machine design of all presses
5.7.1 Inappropriate posture and effort
5.7.2 Inadequate local lighting
5.8 Failure of energy supply or control systems
6 Verification of safety requirements and/or measures
7 Information concerning machine use
7.1 Instruction handbook
7.2 Warning signs
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Describes the designer on assessing the risks associated with the hazards and on selecting measures for attaining the required safety level.
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 10472-6 : 2009 | Identical |
| NEN EN ISO 10472-6 : 2008 | Identical |
| NF EN ISO 10472-6 : 2009 | Identical |
| EN ISO 10472-6:2008 | Identical |
| ISO 10472-6:1997 | Identical |
| DIN EN ISO 10472-6:2009-10 | Identical |
| NS EN ISO 10472-6 : 2ED 2008 | Identical |
| BS EN ISO 10472-6:2008 | Identical |
| NBN EN ISO 10472-6 : 2009 | Identical |
| UNE-EN ISO 10472-6:2009 | Identical |
| SN EN ISO 10472-6 : 2009 | Identical |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 574:1996+A1:2008 | Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.