I.S. EN 62931:2017
Current
The latest, up-to-date edition.
GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and general test requirements
5 Marking
6 Interchangeability
7 Protection against accidental contact with live parts
8 Insulation resistance and electric strength after
humidity treatment
9 Mechanical requirements for caps
10 Cap temperature rise
11 Resistance to heat
12 Resistance to flame and ignition
13 Resistance to heat of insulating material of cap
14 Fault conditions
15 Creepage distances and clearances
16 Ingress protection
17 Photobiological safety
18 Information for controlgear design
19 Information for lampholder design
20 Information for luminaire design
Annex A (normative) - Test method for lamp cap
temperature rise for GX16t-5 lamps
Annex B (informative) - Information for controlgear
design
Annex C (informative) - Information for luminaire
design
Annex D (normative) - Dimensions and information
to electrical characteristics
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Defines the safety and interchangeability requirements together with the test methods and conditions required to show compliance of non-integrated tubular LED lamps, intended for general lighting purposes, having: - a rated wattage up to 70 W, - a rated voltage up to 190 V ripple free DC, - GX16t-5 cap as listed in Table 1.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
76
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 62931:2017 | Identical |
| IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
| EN 62031:2008/A2:2015 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014) |
| IEC TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
| IEC 61347-2-13:2014+AMD1:2016 CSV | Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgear for LED modules |
| EN 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
| EN 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 62504:2014 | General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
| IEC 60061-4:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| EN 60838-2-3:2017 | Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| IEC 61195:1999+AMD1:2012+AMD2:2014 CSV | Double-capped fluorescent lamps - Safety specifications |
| IEC 60838-2-3:2016 | Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.