I.S. EN 62864-1:2016
Current
The latest, up-to-date edition.
RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Power source configuration of hybrid systems
5 Environmental conditions
6 Functional and system requirements
7 Kinds of tests
8 Combined tests
9 Vehicle test
Annex A (informative) - State of charge (SOC)
and state of energy (SOE) for batteries
and capacitors
Annex B (informative) - Energy related terms
and definitions
Annex C (informative) - Laws and regulations for
fire protection applicable for this standard
Annex D (informative) - List of subclauses
requiring agreement between the user
and the manufacturer
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Pertains to series hybrid systems (electrically connected) with onboard energy storage (hereinafter referred as hybrid system).
| DocumentType |
Standard
|
| Pages |
134
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 62864-1:2016 | Identical |
| EN 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| IEC 62620:2014 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications |
| CLC/TS 50591:2013 | Specification and verification of energy consumption for railway rolling stock |
| IEC 62236-3-1:2008 | Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction Systems |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| IEC 61133:2016 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| EN 50547:2013 | Railway applications - Batteries for auxiliary power supply systems |
| EN 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEC 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
| ISO 23274:2007 | Hybrid-electric road vehicles Exhaust emissions and fuel consumption measurements Non-externally chargeable vehicles |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| IEC 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| EN 61881-3:2012/A1:2013 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013) |
| IEC 60349-2:2010 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors |
| ISO 12405-1:2011 | Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 1: High-power applications |
| EN 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEC 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| EN 60349-2:2010 | ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 62278:2002 | Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS) |
| EN 60254-2:2008 | Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells |
| IEC 61991:2000 | Railway applications - Rolling stock - Protective provisions against electrical hazards |
| IEC 60571:2012 | Railway applications - Electronic equipment used on rolling stock |
| EN 60216-5:2008 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
| EN 60254-1:2005 | Lead acid traction batteries - Part 1: General requirements and methods of tests |
| EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
| IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| IEC 62236-3-2:2008 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| IEC 60349-4:2012 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
| EN 60349-4:2013 | Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter |
| EN 62620:2015 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications |
| ISO 6469-3:2011 | Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
| IEC 62497-1:2010+AMD1:2013 CSV | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment |
| IEC 61881-3:2012+AMD1:2013 CSV | Railway applications - Rolling stock equipment - Capacitors forpower electronics - Part 3: Electric double-layer capacitors |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 60216-5:2008 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
| IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 61287-1:2014/AC:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
| EN 1986-2:2001 | Electrically propelled road vehicles - Measurement of energy performances - Part 2: Thermal electric hybrid vehicles |
| IEC 62498-1:2010 | Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock |
| ISO 23828:2013 | Fuel cell road vehicles Energy consumption measurement Vehicles fuelled with compressed hydrogen |
| IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.