I.S. EN 61988-4:2007
Current
The latest, up-to-date edition.
PLASMA DISPLAY PANELS - PART 4: CLIMATIC AND MECHANICAL TESTING METHODS
Hardcopy , PDF
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions and letter symbols
4 Structure of testing equipment
5 Standard conditions
5.1 Standard reference atmosphere
5.2 Standard atmospheric conditions for reference
measurements and tests
5.3 Standard atmospheric conditions for measurement
and tests
5.4 Standard atmospheric conditions for assisted drying
5.5 Recovery conditions
5.6 Standard installation conditions
5.7 Standard measuring conditions
5.8 PDP module state
5.9 Operating conditions
6 Measurements
7 Climatic testing methods
7.1 Storage at high temperature
7.2 Storage at low temperature
7.3 Damp heat, cyclic
7.4 Damp heat at steady state (Operation)
7.5 Operation at low temperature
7.6 Low air pressure
8 Mechanical testing methods
8.1 Vibration (sinusoidal)
8.2 Shock
8.3 Transportation drop
8.4 Toppling
Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Defines test methods for evaluating environmental and mechanical endurance characteristics of plasma display modules (PDP modules).
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| IEC 61988-4:2007 | Identical |
| BS EN 61988-4:2007 | Identical |
| EN 61988-4 : 2007 | Identical |
| DIN EN 61988-4:2007-10 | Identical |
| NBN EN 61988-4 : 2007 | Identical |
| UNE-EN 61988-4:2007 | Identical |
| NF EN 61988-4 : 2007 | Identical |
| IEC 61988-1:2011 | Plasma display panels - Part 1: Terminology and letter symbols |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 24180-1 : 1992 | COMPLETE, FILLED TRANSPORT PACKAGES - GENERAL RULES FOR THE COMPILATION OF PERFORMANCE TEST SCHEDULES - GENERAL PRINCIPLES |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 61988-1:2011 | Plasma display panels - Part 1: Terminology and letter symbols |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| ISO 4180-1:1980 | Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 1: General principles |
| EN 24180-2 : 1992 | COMPLETE, FILLED TRANSPORT PACKAGES - GENERAL RULES FOR THE COMPILATION OF PERFORMANCE TEST SCHEDULES - QUANTITATIVE DATA |
| IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 61988-2-1:2012 | Plasma display panels - Part 2-1: Measuring methods - Optical and optoelectrical |
| IEC 61747-5:1998 | Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods |
| EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| EN 22248:1992 | Packaging - Complete, filled transport packages - Vertical impact test by dropping (ISO 2248:1985) |
| ISO 10531:1992 | Packaging — Complete, filled transport packages — Stability testing of unit loads |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
| EN 60068-2-13:1999 | Environmental testing - Part 2: Tests - Test M: Low air pressure |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| ISO 2248:1985 | Packaging Complete, filled transport packages Vertical impact test by dropping |
| EN 61747-5:1998 | Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods |
| ISO 4180-2:1980 | Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 2: Quantitative data |
| IEC 61988-2-2:2003 | Plasma display panels - Part 2-2: Measuring methods - Optoelectrical |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.