I.S. EN 61788-21:2015
Current
The latest, up-to-date edition.
SUPERCONDUCTIVITY - PART 21: SUPERCONDUCTING WIRES - TEST METHODS FOR PRACTICAL SUPERCONDUCTING WIRES - GENERAL CHARACTERISTICS AND GUIDANCE
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Characteristic attributes of practical SC wires
5 Categories of properties
6 Properties governed by IEC standards
Annex A (informative) - Characteristic attributes of
practical SC wires
Bibliography
Annex ZA (normative) - Normative references
to international publications with their
corresponding European publications
Defines the test methods used for validating the mechanical, electrical, and superconducting properties of practical SC wires.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 61788-21:2015 | Identical |
| EN 61788-5:2013 | SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES |
| IEC 61788-10:2006 | Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method |
| IEC 61788-1:2006 | Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors |
| EN 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| EN 61788-13:2012 | Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites |
| EN 61788-4:2016 | Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors |
| IEC 61788-11:2011 | Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors |
| IEC 61788-3:2006 | Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors |
| IEC 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| IEC 61788-6:2011 | Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| IEC 61788-4:2016 | Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb<sub>3</sub>Sn composite superconductors |
| EN 61788-6:2011 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| IEC 60050-815:2015 | International Electrotechnical Vocabulary (IEV) - Part 815: Superconductivity |
| EN 61788-3:2006 | SUPERCONDUCTIVITY - PART 3: CRITICAL CURRENT MEASUREMENT - DC CRITICAL CURRENT OF AG- AND/OR AG ALLOY-SHEATHED BI-2212 AND BI-2223 OXIDE SUPERCONDUCTORS |
| EN 61788-2:2007 | Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors |
| IEC 61788-8:2010 | Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method |
| EN 61788-19:2014 | Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
| EN 61788-12:2013 | Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires |
| IEC 61788-13:2012 | Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites |
| EN 61788-8:2010 | Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method |
| EN 61788-1:2007 | Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors |
| IEC 61788-12:2013 | Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb<sub>3</sub>Sn composite superconducting wires |
| IEC TR 61788-20:2014 | Superconductivity - Part 20: Superconducting wires - Categories of practical superconducting wires - General characteristics and guidance |
| IEC 61788-19:2013 | Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors |
| EN 61788-10:2006 | SUPERCONDUCTIVITY - PART 10: CRITICAL TEMPERATURE MEASUREMENT - CRITICAL TEMPERATURE OF COMPOSITE SUPERCONDUCTORS BY A RESISTANCE METHOD |
| EN 61788-11:2011 | SUPERCONDUCTIVITY - PART 11: RESIDUAL RESISTANCE RATIO MEASUREMENT - RESIDUAL RESISTANCE RATIO OF NB[3]SN COMPOSITE SUPERCONDUCTORS |
| IEC 61788-5:2013 | Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| IEC 61788-2:2006 | Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.