I.S. EN 61755-3-31:2015
Current
The latest, up-to-date edition.
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTOR OPTICAL INTERFACES - PART 3-31: CONNECTOR PARAMETERS OF NON-DISPERSION SHIFTED SINGLE MODE PHYSICALLY CONTACTING FIBRES - ANGLED POLYPHENYLENE SULPHIDE RECTANGULAR FERRULES
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
FOREWORD
1 Scope
2 Normative references
3 Description
4 Interface parameters
Annex A (informative) - Theoretical worst-case connector
attenuation yield percentage
Annex B (normative) - Minus coplanarity
Annex C (informative) - Minimum normal force required
to achieve physical contact
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Specifies certain dimensional limits of an angled PC rectangular polyphenylene sulphide (PPS) ferrule optical interface in order to meet specific requirements for fibre-to-fibre interconnection.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 61755-3-31:2015 | Identical |
| IEC 61754-18:2001 | Fibre optic connector interfaces - Part 18: Type MT-RJ connector family |
| EN 60793-2-50:2016 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 61755-2-1:2006 | Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres |
| IEC 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| EN 61754-5:2005 | Fibre optic connector interfaces - Part 5: Type MT connector family |
| EN 61300-3-30:2003 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors |
| IEC 61754-10:2005 | Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family |
| EN 61300-3-52:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibres |
| EN 61754-18:2002/corrigendum:2002 | FIBRE OPTIC CONNECTOR INTERFACES - PART 18: TYPE MT-RJ CONNECTOR FAMILY |
| EN 61755-1:2006/corrigendum:2006 | FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1: OPTICAL INTERFACES FOR SINGLE MODE NON-DISPERSION SHIFTED FIBRES - GENERAL AND GUIDANCE |
| IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 61300-3-30:2003 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors |
| IEC 61754-7-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row |
| EN 61754-10:2005 | Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family |
| IEC 61300-3-52:2014 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, C<sub>D</sub> for 8 degree angled PC rectangular ferrule, single mode fibres |
| EN 61754-7:2008 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family |
| IEC 61754-7:2008 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family |
| EN 61754-7-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row |
| IEC 61755-1:2005 | Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.