I.S. EN 61270-1:1999
Current
The latest, up-to-date edition.
CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL
Hardcopy , PDF
English
01-01-1999
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 General
1.1 Scope and object
1.2 Normative references
2 Definitions
3 Service conditions
3.1 Altitude
3.2 Pollution
3.3 Operating temperature
3.4 Damp heat severity
4 Safety and construction
4.1 Safety
4.2 Terminations
4.3 Creepage distances and clearances
4.4 Temperature dependance of the capacitance
4.5 Capacitance tolerance
4.6 Voltage
4.7 Load capacity
4.8 Marking
5 Tests
5.1 General
5.2 Test conditions
5.3 Nature of tests
5.4 Type tests
5.5 Routine tests
5.6 Visual examination
5.7 Capacitance measurement
5.8 Voltage tests
5.9 Voltage test between the terminals
5.10 Voltage test between terminals and case
5.11 Voltage test between capacitor elements
5.12 Test of internal discharge device
5.13 Endurance test
5.14 Mechanical and climatic tests
6 Environmental protection
Annex A (informative) Information on tests on components made of
insulating material (i.e. insulators)
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Deals with capacitors with a metal case and an upper rated maximum temperature of up to 100 Degree C, non-self-heating, with metal foil electrodes and dielectrics of paper and/or plastic, impregnated with a suitable oil.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 61270-1 : 1997 | Identical |
| BS EN 61270-1:1998 | Identical |
| SN EN 61270-1 : 1996 | Identical |
| NF EN 61270-1 : 1997 | Identical |
| EN 61270-1:1996 | Identical |
| IEC 61270-1:1996 | Identical |
| NBN EN 61270-1 : 1997 | Identical |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| HD 323.2.20 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60695-2-1:1991 | Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance |
| HD 214 : 200S2 | RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 60335-2-25:2010+AMD1:2014+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combinationmicrowave ovens |
| HD 323.2.14 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST N: OF TEMPERATURE |
| IEC 60695-2-10:2000 | FIRE HAZARD TESTING - TEST METHODS - GLOW-WIRE TEST METHODS - GENERAL |
| HD 323.2.3 : 200S2 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| HD 323.2.21 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.