I.S. EN 61158-4:2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
DIGITAL DATA COMMUNICATION FOR MEASUREMENT AND CONTROL - FIELDBUS FOR USE IN INDUSTRIAL CONTROL SYSTEMS - PART 4: DATA LINK PROTOCOL SPECIFICATION
Hardcopy , PDF
30-04-2008
English
24-08-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
0 Introduction
1 Scope and object
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 DL-protocol elements common to multiple DL-protocol Types
6 Type 1: Overview of the DL-protocol
7 Type 1: General structure and encoding of PhIDUs and DLPDUs,
and related elements of procedure
8 Type 1: DLPDU-specific structure, encoding and elements of
procedure
9 Type 1: DLPDU-parameter structure and encoding
10 Type 1: DL-service elements of procedure
11 Type 1: DL-support sub protocol
12 Type 1: Other DLE elements of procedure
13 Type 1: PICS proforma
14 Type 2: Overview of the DL-protocol
15 Type 2: General structure and encoding of PhIDUs and DLPDUs
and related elements of procedure
16 Type 2: Specific DLPDU structure, encoding and procedures
17 Type 2: Objects for station management
18 Type 2: Other DLE elements of procedure
19 Type 2: Detailed specification of DL components
20 Type 3: Overview of the DL-protocol
21 Type 3: General structure and encoding of DLPDUs, and related
elements of procedure
22 Type 3: DLPDU-specific structure, encoding and elements of
procedure
23 Type 3: Other DLE elements of procedure
24 Type 4: Data Link Protocol Definition
25 Type 5:
26 Type 6: Connection-oriented DL-protocol and related matters
27 Type 6: MAC elements of procedure
28 Type 7: Overview of the DL-protocol
29 Type 7: General structure and encoding of PhIDUs and DLPDUs
and related elements of procedure
30 Type 7: DLPDU-specific structure, encoding and element of
procedure
31 Type 7: DL-service elements of procedure, interfaces and
conformance
32 Type 8: DL-protocol
Annex A (informative) - Types 1, 2, 3 (synchronous), 5 (first FCS),
6, 7, and 8: Exemplary FCS implementations
Annex B (informative) - Type 1: Formal protocol finite state machines
Annex C (informative) - Type 1: DLPDU and DL-addressing short-form
summaries
Annex D (informative) - Type 2: Indicators and Switches
Annex E (normative) - Type 3: DL-Protocol state machines
Annex F (informative) - Type 3: Exemplary token procedure and message
transfer periods
Annex G (informative) - Type 7: Object Modeling
Annex H (informative) - Type 7: Topology of multi-segment DL-subnetwork
Annex I (informative) - Type 7: Management of transmission errors
Annex J (informative) - Type 8: Implementation possibilities of definite
PNM2 functions
BIBLIOGRAPHY
INDEX
Facilitates the interconnection of automation system components. It is related to other standards in the set as defined by the three-layer Fieldbus Reference Model, which is based in part on the Basic Reference Model for Open Systems Interconnection.
| DevelopmentNote |
Supersedes I.S. EN 50170 and I.S. EN 50254. (09/2004) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017) 2004 Edition is Partially Superseded by I.S. EN 61158-4-11, I.S. EN 61158-4-1, I.S. EN 61158-4-12, I.S. EN 61158-4-13, I.S. EN 61158-4-14, I.S. EN 61158-4-16, I.S. EN 61158-4-17, I.S. EN 61158-4-18, I.S. EN 61158-4-19, I.S. EN 61158-4-2, I.S. EN 61158-4-3, I.S. EN 61158-4-4, I.S. EN 61158-4-7, I.S. EN 61158-4-8. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
1109
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| DIN EN 61158-4:2005-05 | Identical |
| IEC 61158-4:2003 | Identical |
| NBN EN 61158-4 : 2005 | Identical |
| NF EN 61158-4 : 2004 | Identical |
| BS EN 61158-4:2004 | Identical |
| EN 61158-4:2004 | Identical |
| IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| ISO/IEC 7498-3:1997 | Information technology — Open Systems Interconnection — Basic Reference Model: Naming and addressing |
| ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
| EN 61158-6:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| IEEE 1451.2 : 1997 | SMART TRANSDUCER INTERFACE FOR SENSORS AND ACTUATORS - TRANSDUCER TO MICROPROCESSOR COMMUNICATION PROTOCOLS AND TRANSDUCER ELECTRONIC DATA SHEET (TEDS) FORMATS |
| ISO/IEC 8886:1996 | Information technology Open Systems Interconnection Data link service definition |
| EN 50170 : 96 AMD 3 2002 | GENERAL PURPOSE FIELD COMMUNICATION SYSTEM |
| IEC 60559:1989 | Binary floating-point arithmetic for microprocessor systems |
| ISO/IEC 3309:1993 | Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Frame structure |
| ISO/IEC 2022:1994 | Information technology Character code structure and extension techniques |
| ISO/IEC 9646-2:1994 | Information technology Open Systems Interconnection Conformance testing methodology and framework Part 2: Abstract Test Suite specification |
| ISO/IEC 10731:1994 | Information technology Open Systems Interconnection Basic Reference Model Conventions for the definition of OSI services |
| EN 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
| ISO/TR 8509:1987 | Information processing systems Open Systems Interconnection Service conventions |
| EN ISO/IEC 7498-1 : 1995 | INFORMATION TECHNOLOGY - OPEN SYSTEMS INTERCONNECTION - BASIC REFERENCE MODEL: THE BASIC MODEL |
| ISO/IEC 15802-1:1995 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Common specifications Part 1: Medium Access Control (MAC) service definition |
| IEEE 1451.1 : 2007 | IEEE STANDARD FOR A SMART TRANSDUCER INTERFACE FOR SENSORS AND ACTUATORS - NETWORK CAPABLE APPLICATION PROCESSOR (NCAP) INFORMATION MODEL |
| ISO 1177:1985 | Information processing Character structure for start/stop and synchronous character oriented transmission |
| ISO/IEC 9646-1:1994 | Information technology Open Systems Interconnection Conformance testing methodology and framework Part 1: General concepts |
| EN 61158-5:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
| EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| IEC 61158-6:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification |
| ISO/IEC 10646-1:2000 | Information technology Universal Multiple-Octet Coded Character Set (UCS) Part 1: Architecture and Basic Multilingual Plane |
| IEC 60870-5-1:1990 | Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats |
| IEC 61158-5:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition |
| EN 61158-3:2004 | Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
| IEC 61158-3:2003 | Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 3: Data link service definition |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.