I.S. EN 4604-007:2007
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 007: CABLE, COAXIAL 50 OHMS, 200 DEGREE C, TYPE WN - PRODUCT STANDARD
Hardcopy , PDF
30-06-2020
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirement characteristics
4.1 Material, construction, dimensions and mass
4.1.1 Material
4.1.2 Construction, dimensions and mass
4.2 General characteristics
4.3 Electrical characteristics
4.4 Tests
5 Quality assurance
6 Designation
7 Identification and marking
8 Packaging, labelling and delivery lengths
8.1 Packaging and labelling
8.2 Delivery lengths
9 Technical specification
Describes required characteristics of a coaxial cable, 50 ohms, type WN, for use in aircraft electrical systems at operating temperature between -55 degree C and 200 degree C and especially for high frequency up to 6 GHz.
DocumentType |
Standard
|
Pages |
12
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
NEN EN 4604-007 : 2007 | Identical |
BS EN 4604-007:2007 | Identical |
SN EN 4604-007 : 2008 | Identical |
EN 4604-007:2007 | Identical |
NF EN 4604-007 : 2008 | Identical |
NBN EN 4604-007 : 2008 | Identical |
DIN EN 4604-007:2008-02 | Identical |
NS EN 4604-007 : 1ED 2007 | Identical |
ONORM EN 4604-007 : 2008 | Identical |
EN 3475-401:2002 | Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing |
EN 3475-504:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion |
EN 3475-513:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (Installation with plastic cable ties) |
EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking |
EN 3475-409:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing |
EN 3475-302:2006 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test |
EN 3475-511:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion |
EN 3475-411:2014 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
EN 3475-202:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass |
EN 3475-507:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating |
EN 3475-502:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation |
MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
EN 3475-807:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 807: Transfer impedance |
TR 6058 : 2011 | AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST |
EN 3475-415:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415: Rapid change of temperature |
EN 3475-405:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature |
EN 4604-001:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification |
EN 3475-410:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance |
EN 3475-506:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity |
EN 3475-305:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance |
EN 3475-602:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
EN 4604-002:2009 | Aerospace series - Cable, electrical, for signal transmission - Part 002: General |
EN 3475-804:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 804: Velocity of propagation |
EN 3475-404:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock |
EN 3475-512:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance |
EN 3475-509:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability |
EN 3475-306:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 306: Continuity of conductors |
EN 3475-201:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination |
EN 3475-505:2012 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands |
EN 3475-702:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability |
EN 3475-413:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test |
EN 3475-303:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance |
EN 3475-601:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
EN 3475-304:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance |
EN 3475-503:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion |
EN 3475-806:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation |
EN 3475-301:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length |
EN 3475-706:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability |
EN 3475-403:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking |
EN 3475-402:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination |
EN 3475-805:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance |
EN 3475-510:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material |
EN 3475-801:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 801: Capacitance per unit length |
EN 3475-100:2010 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General |
EN 3475-803:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation |
EN 3475-307:2015 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307: Corona extinction voltage |
EN 3475-203:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions |
EN 3475-416:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416: Thermal stability |
EN 3475-414:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) |
EN 3475-704:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility |
EN 3475-412:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance |
EN 3475-408:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance |
EN 3475-501:2006 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through |
EN 3475-406:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test |
EN 3475-705:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement |
EN 3475-701:2017 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor |
EN 3475-508:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness |
EN 3475-407:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability |
EN 3475-808:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 808: Cross-talk |
EN 3475-802:2009 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.