I.S. EN 295-4:2013
Current
The latest, up-to-date edition.
VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
Hardcopy , PDF
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements for adaptors, connectors and flexible
couplings
6 Common requirements for adaptors, connectors and
flexible couplings
7 Designation
8 Marking
9 Evaluation of conformity
Annex A (normative) - Metal banded flexible couplings
and adaptors
Annex B (normative) - Connectors, insertable fittings
and sealing rings
Annex C (normative) - Heatshrinkable sleeves
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Directive
Bibliography
Defines requirements for adaptors and connectors made from vitrified clay and/or other suitable materials for use with vitrified clay pipes and fittings for buried drain and sewer systems for the conveyance of wastewater (including domestic wastewater, surface water and rainwater) under gravity and periodic hydraulic surcharge or under continuous low head of pressure.
| DevelopmentNote |
Together with I.S. EN 295-1, I.S. EN 295-2, I.S. EN 295-5, I.S. EN 295-6 and I.S. EN 295-7 it supersedes I.S. EN 295-10. (02/2013)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 295-4:2013 | Identical |
| NBN EN 295-4 : 2013 | Identical |
| NEN EN 295-4 : 2013 | Identical |
| DIN EN 295-4:2013-05 | Identical |
| EN 295-4:2013 | Identical |
| NS EN 295-4 : 2013 | Identical |
| SN EN 295-4 : 2013 | Identical |
| BS EN 295-4:2013 | Identical |
| NF EN 295-4 : 2013 | Identical |
| UNI EN 295-4 : 2013 | Identical |
| EN 295-3:2012 | Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN ISO 9445-1:2010 | Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) |
| EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| EN 295-6:2013 | Vitrified clay pipes systems for drain and sewers - Part 6: Requirements for components of manholes and inspection chambers |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 4587:2003 | Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| ISO 3302-1:2014 | Rubber — Tolerances for products — Part 1: Dimensional tolerances |
| EN 295-2:2013 | Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| EN 295-5:2013 | Vitrified clay pipe systems for drains and sewers - Part 5: Requirements for perforated pipes and fittings |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| ISO 9445-1:2009 | Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths |
| EN 295-1:2013 | Vitrified clay pipe systems for drains and sewers - Part 1: Requirements for pipes, fittings and joints |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.